GT70 2OD again microphone problem somebody please fix it

I am going to crazy I have 1 post https://forum-en.msi.com/index.php?topic=168316.msg1300035#msg1300035 and topic about it https://forum-en.msi.com/index.php?topic=180690.msg1299457#msg1299457 but this time can not fix I wanted help from offical msi central but they couldnt do anything they just offer me technical support, so I gave but they couldnt fix they said its about software beceause when delete msi driver microphone is working but this time strange sounds coming why msi do not add new drivers noise equalization when add it its work perfectly but when didnt its so buggy and I am honestly bored give technical support or say my problem to msi central as a gamer I need it so much and I cant do this everytime, its imporant for me

yes now I have 6.0.1.7283_MS-16F4_EQ_Win8.1_Win8_Win7_WHQL downloaded from http://www.msi.com/support/nb/GT70_2OD.html#down-driver&Win8.1 64 but new drives come without noise equalization. with that feature my microphone always works, I should setup old driver for record voice from headphone , old drives have noise equalization but this time a random day when I open my laptop its going to crash because its old and when I try to install old drivers its not work so , I dont have any choose should install new one
for example this record without headphone https://soundcloud.com/andrey-eren-bozkurt/without-headphone and this one with headphone https://soundcloud.com/andrey-eren-bozkurt/mikrofonlu there is no problem with headphone because its work with other computers or laptops I also have another one but doesnt work, when I delete I sound drivers microphone work with headphone or without but speakers work weird I couldnt fix , offical support also and I gave technical support they said its about software

Similar Messages

Can somebody please fix the mess that is iBooks?

can somebody please fix the mess that is iBooks? lousy metadata, lousy usability, and now fails to read my library until I delete it from the filesystem then rebuild it. reboot, and it's screwed again. do you need someone to run the iBooks development program? please let me know.

For Apple to see your message, best repeat it at
http://www.apple.com/feedback

Unending microphone problem- Creative please assist- this is getting redicul

Problem:
When I play online games, namely HalfLife mods but others are effected the same way, my voice is completely garbled. I am told I sound like I am underwater. The Windows hardware test gives fair results, I can hear my voice but it is not crystal clear and sounds a bit "digital" (Yes, the digital output option is turned off).
What I have:
SoundBlaster Li've! 24-Bit
HP 725N
2400+ Althalon XP
52Meg Memory
447Meg residual Memory (after graphic sharing)
Nvidia 64meg GeForce MX onboard graphics card
What I have tried:
. Going through and tweaking every last setting I have in the Contol Panel and the game related to sound and voice recording.
2. Updating BIOS including disabling onboard sound
3. Turning down the acelleration on my graphics card
4. Updating drivers for everything (sound and graphics)
5. Swapped out 3 different microphones
6. Turning off every running process unrelated to graphic or sound to free additional memory/bandwidth
Someone... anyone... please help. I purchased this card to upgrade my sound from the on-board card but all I have accomplished is to ruin something that was previously working fine!
Thanks!

So when you record using a normal program (like Wavestudio or the basic Windows Recorder), is the sound distorted (so not crystal clear, but "digital" sounding) aswell?
Have you tried fully uninstalling the soundcard, moving it to another PCI slot and then reinstalling? Just in case there is a conflict with other hardware or onboard resources. Disable programs loaded in the background aswell, all of them, to see if it hel
ps.
If it does you can start them up or re-enable them one by one to see when it goes wrong again.
Otherwise I would recommend you contact Customer Support, so they can give you specific tailored support, and go through all the options, settings and configuration with you to see what could be causing this.
Cat

Avoid MathScipt Comments in EXE, Build & Run Problems - NI Please Fix these Bugs!

Hello,
After 4 days of intensive work, I have finally found the solution for two major MathScript Problems:
1) Mathscript Comments are included in your EXE File !!
 - Yes, if you do not watch your steps, the EXE will include all your % Mathscript Comments!
2) Problems building, but even worse: An app that builds with NO Error and NO Warnings will not RUN and creates the following misleading Erro Message:
 "The VI is not Executable. The full development version of LabView is required to fix the errors"
 With absolutely NO hint to what VI have the problem.
I have made myself an internal note how to avoid this problem. I am using LabView 2009, 2010 DS1 Release (I think this is 9.01) under WInXP SP2.
Rather than retyping everything, I will post the full text of my Notes below. I also mention several other LV BUG in this note, so pleae read carefully.
One is the TagSrv Error that occurs in LabView 2009 if I programatically deploy Shared Variables under the WinXP Development Environment. After this problem has occured, it will occur every time I restart XP, and in essense I have to restore to before I did this (thanks Nortong Ghost !!!).
Below you can find the full unabridged version of my Build, Run and Bug Notes for LV 2009 / 2010 DS1 (9.01). Hope they can be helpful to my fellow LabView programmers!
2010-07-03:
Building under LabView 2009 / 2010 DS1 Release (version 9.01)
Follow the steps below:
a) To successfully build an EXE that also runs
b) Avoid that MathScript Comments are included in the EXE !!!!!!!!!!!!!!!!
Before Building:
I) Recompile All by pressing Ctrl+Shift and pressing the RUN button on the Application_References.vi
 Then Save All (about 1200 Vis are saved)
II) Make Sure that NO User Defined Mathscript (and Mathscript Nodes?) define Empty Functions:
 This seemed to cause the following problem with the built EXE: The main VI will be broken, and a dialog reports:
 "The VI is not Executable. The full development version of LabView is required to fix the errors"
 MathScitp BUG: Empty Functions causes no Build Errorm but RUN Error:
 The following User Defined MathScript .m files are candidates:
 log_write() and log_clear() whith do_log_write() and do_log_clear() commented out, these functions are empty.
 When calls to log_write() and log_clear() where removed, the problem above vanished !
Building the EXE:
1) Additional Exclusions:
-"Disconnect type definitions": YES
- "Remove unused polymorphic VI instantces": YES
- "Remove unused members of project libraries": NO (do not know if this is important)
2) Advanced:
- Enable Debugging: "NO"
3) Mathscript BUG: The Application Builder Includes ALL MathScript Comments in the EXE if you use the New Build File Layout:
 IMPORTANT !!!!!!!!!!!!!
 Advanced:
 "Use LabView 8.x file layout": YES !!!!!!!
 Using the new layout, causes ALL COMMENTS FROM USER DEFINED MATHSCRIPT .M FILES TO BE INCLUDED IN THE .EXE !!!!!!!
4) BUG: DSC Reference Problem in LabView 2010 DS1 release:
 In VI Deploy_Shared_Variables.vi we deploy alle Shared Variables using the "Deploy Libraries.vi" which is a part of the DSC option.
 As long as only deploying of Variables is used, using this VI should NOT require any DSC Runtime license.
 We have used this before with no compilation problems.
 However, starting with LV 2009 SP1 (or was it the DS1 2010 upgrade) LV will start nagging us to resolve references to tens of VIs
 in the DSC lib file ! Solution: Used press "Stop" on the dialog, and the Build will succeed and the EXE will work !
 Optionally, we could use the following Invoke node for the deployment:
 (see: http://digital.ni.com/public.nsf/allkb/04D9A85B6967EE87862571140065EEC6). Excerpt from this description:
<<Right-click the block diagram to bring up the programming palette and go to Programming»Application Control and place the
 Invoke Node on the block diagram. Using the hand tool, click Method and select Library»Deploy Library>>
5) LabView BUG: Do NOT RUn the Application under the WIn XP SP2 Development Environment if the APP Deploys Shared Vars:
 This will cause the Dreaded TagSrv Error: "TagSrv.exe: This application has requested the runtime to terminate in an unusual way".
 After this Error has occured, it will reoccur each time WinXP SP2 is restarted, and (Network) Shared Variables will NOT work any more!
Geir Ove
Attachments:
LabView_Tagsrv_Error.jpg ‏26 KB

Hello Geir,
I have tried to reproduce the behavior you are seeing where .m file comments appear in the final built executable. However, I am unable to do so using LabVIEW 2009 SP1. I have a caller VI with a MathScript node that calls the adder function in adder.m. The contents of adder.m are as follows:
% ADDER This function adds 3 to its input variable
% y = adder(x)
% INPUT: x
% OUTPUT: y, equal to x + 3
function y = adder(x)
y = x + 3;
I have configured the build specification as you mention in steps (1) and (2):
Additional Exclusions
- "Disconnect type definitions" Yes
- "Remove unused polymorphic VI instances" Yes
- "Remove unused members of project libraries" No
Advanced
- "Enable Debugging" No
At first, I did not include the adder.m file in the project. I built the application and was not able to find the text "adder" anywhere in the EXE. Then, I added the .m file to the project and put it in the "Always Included" section in "Source Files." Again, I was not able to find the search text in the built EXE. In step 3, you mention
geirove wrote:
 "Use LabView 8.x file layout": YES !!!!!!!
but in the 5th post in this thread, you state
geirove wrote:
Compile using the new compile method ( Use LabView 8.x file layout": NO),
I have tried both settings in the Advanced section, but again, I am not able to find any comments in the EXE. I even added a call to the "path" function in adder.m. This puts a warning glyph on the caller MathScript node and generates different code. The EXE will return an unknown symbol error for adder (any VI with a warning glyph will not work in a built app), but I am not able to find any comments in the EXE. This project is attached below.
As for your other item with a broken EXE if you call empty functions, I am unable to reproduce this as well. I have taken the last attachment to your third post in this thread (the log_write function) and called it from the caller VI as well. The EXE runs just fine and I do not find any comments in this EXE either.
Unfortunately, there was a rather serious issue in the LabVIEW 2009 MathScript RT Module, where some internal MathScript VIs could become corrupted when building executables. Have you tried running the "Find Bad Instantiations" tool from this Knowledge Base article? Simply installing the SP1 version on top may not have corrected any VIs that may be corrupted.
Due to our difficulty in reproducing the issues you mention, could you modify the attached project or else attach a new project, appropriately configured, that builds an EXE with .m comments embedded in it? This way, we can uncover any minute details that we're overlooking.
Grant M.
Senior Software Engineer | LabVIEW MathScript | National Instruments
Attachments:
MComments.zip ‏186 KB

Can somebody please fix the link for "Discussions" on Oracle JDev HomePage

Current Link on Oracle JDeveloper Official Home Page
JDeveloper and ADF
Correct Link
JDeveloper and ADF

thanks for reporting
Frank

Please, Fix this I think its a BUG

I'm using iPhone 3gs
I have problem with my volume slider. It works fine for, like 7 to 6 hours. Then, the problem of volume slider started to occur. Every time I adjust the volume slider it slides back to where it was. Here is a good example of a guy who has the same problem. http://www.youtube.com/watch?v=ajsMXBo5fXM Please, take a look at 1:54 min.
I have the way to fix the problem, though, is to restart iPhone. but I dont want to restart my iPhone everytime this problem occur
I don't know whether its the hardware or software problem, but PLEASE fix this or gimme the solution.
By the way, it happens with both FW3.0.1 and 3.1
I thought upgrading the FW would help but its not!
Thank you for ur kind answer.
PS. Is there anyone who has the same problem as mine??? How do u solve it??

I am having this same type of problem which I have posted in here already.
http://discussions.apple.com/thread.jspa?threadID=2085835&tstart=0
My problem is when I am using my phone hooked up through the headphones in my car, every now and then the volume will slide on its own either all the way up or all the way down and the volume picture will be stuck on. The only way to stop this is to turn the phone off and then back on. It doesn't happen all the time and I guess I am too lazy to call Apple or go to a store and my question still has not been answered on this forum. Up until now I have not heard anyone else having this problem and yours is very close to what I am experiencing but at the same time different. I will try the resetting of my phone to see if that works. Thanks for your post.

I upgraded my 4s to 7.0.4 and now I can't access hotmail through my main mail app. When I open it a pop up says password incorrect even after I put my password in it pops up again. How do I fix this please help

I upgraded my 4s to 7.0.4 and now I can't acicess hotmail through my main mail app. When I open it a pop up says password incorrect even after I put my password in it pops up again. How do I fix this please help

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

HT201407 during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings it took 4 hours an completed but my iphone still wont come on..what can i do to fix the problem? please

during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #

In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February & I've had no control of my phone since. I asked him how to regain control & how he knew his exact words were "oh that is out of our scope of capabilities here at this level & you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed & said you can't!!!! To which I was furious I came home & called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
@TJBUSMC1973-
I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY & Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof & no money. :'((
Again I thank you for your advice but I don't think that will help.
I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right????

Hi, I upgraded my iphone 4 to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tels that this device is not registered as part of the iphone developer programme. How could I fix this problem? Please..?

Hi, I upgraded my iphone 4 (4.3.3) to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tells that "this device is not registered as part of the iphone developer programme." How could I fix this problem? Please help me...,

I had a similar occurrence with my just activated iPhone 4.
I had been using the phone for three days when an odd occurrence with voice mail caused me to call tech support. After some discussion they decided to push the activation to my phone (even though I had been using it for three days). When I went to power it back up again I repeatedly got the "no service" notification. I got tech support on a land line and we tried hard reboots and so on. No joy. They told me to take it in to the point of sale and either the SIM card or the phone needed (or both) needed replacing.
I tried one last hard reboot after dinner and the phone came up with service, but I took it in to the point of sale in the morning and they swapped the SIM card out and I went to a Genius Bar appointment to get the phone checked out. It is supposedly OK, but I am still having some problems when syncing it so I will have to visit the Genius Bar again tomorrow about that. At least I have not experienced the "no service" problem in the roughly 24 hours since the SIM card was replaced. (Fingers crossed)

Please fix this problem. "Enter" on our Keyboards means to go to the next line of type. You have enter as a termintor and a normal typist has to try a few times to get used to your site.

I have a Dell Inspiron with Win-7. I had FF on it but too many conflicts developed so I deleted FF.
Only I miss FF a LOT! And I want to use it again.
Can you help me out? Will FF run on Win-7?
And what do I have to do to make it happen.
I have a Laptop too. I'll be going to it after we get the Wireless Router working.

Your title line is certainly not a true statement. It is certainly also used for "Enter", it depends on what you are doing. It also is used for entering the highlighted choice in a dialog window and is part of the reason why my middle mouse button is set to "Enter". Old keyboards used to have two separate keys, one for new line, and one for Enter.
Perhaps if you explained where it is giving you a problem we could provide a more reasoned answer -- may not be what want, but there is probably logic behind what you get.
Of course Firefox can run on Windows 7, it would not be popular if it couldn't.
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.
* Windows 7 Home Premium http://dmcritchie.mvps.org/windows-7/win7.htm
* Firefox Problems & Issues (Notes) http://dmcritchie.mvps.org/firefox/firefox-problems.htm
* Firefox and other Browser Keyboard Shortcuts (Comparison Table) http://dmcritchie.mvps.org/firefox/keyboard.htm
You can make '''Firefox 6.0''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 6.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.

Just installed iOS7 on iPhone 4. Huge typing lag problem now. Any fixes? Apple please fix asap.

I just installed iOS7 on my new iPhone 4. Huge typing lag problem now. Any fixes out there? How do I uninstall this update. The phone worked better without it. Don't even like the new layout and icon design.
Apple, please fix this now!!!

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

HT204053 Need A Solution With An iCloud Problem So Can Somebody Please Help Me?

Can somebody please help me find a solution to my problem?
When I enter my username and password and hit enter I get this message, "The Apple ID is valid but is not an iCloud account" is the error message I receive implying that I do not have an iCloud account. I have searched and looked at the troubleshooting contents and I haven't found anything even close to this issue so I have come here for help. I appreciate any tips or tricks to fix my problem. Thank you for reading and look forward to hearing your answers.
Thank You,
Lisa W.

Hey Lisa_AW!
If you want to make this Apple ID an iCloud account, try referencing the information here:
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/ht4436
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I have a ram problem, can somebody please help me?

Hello
This is the first time I've put a computer together from scratch (I got some help from a friend though). What I wonder is if there is a manual for the MSI mothercards somewhere on the net because I didn't get any good description in the package, and I can't find the spot for audi and USB inputs. I also would like to know how many memorysticks i can use, because if i put in 3 of them the computer starts to beep. Can somebody please help me?
My specs are:
Q-tec midi Tower
MSI K8N Neo2-FX, nForce3
AMD Athlon 64 3200+ 2.0GHz socket 939
Zalman P4 CNPS-7700-CU
XFX Geforce FX5500 128MB DDR
Samsung Spinpoint P120 200GB
Sony DVD burner DL
Sony floppydisk
Cosair Value S. PC3200 DDR-dimm 512MB unbuffered non-Parity, 64Meg x 64, CL2.5
(I have 3 of these but I can only have 2 at a time or the computer wont work)
// TheGamecritic

Quote from: TheGamecritic on 15-September-05, 18:42:56
Hello
This is the first time I've put a computer together from scratch (I got some help from a friend though). What I wonder is if there is a manual for the MSI mothercards somewhere on the net because I didn't get any good description in the package, and I can't find the spot for audi and USB inputs. I also would like to know how many memorysticks i can use, because if i put in 3 of them the computer starts to beep. Can somebody please help me?
My specs are:
Q-tec midi Tower
MSI K8N Neo2-FX, nForce3
AMD Athlon 64 3200+ 2.0GHz socket 939
Zalman P4 CNPS-7700-CU
XFX Geforce FX5500 128MB DDR
Samsung Spinpoint P120 200GB
Sony DVD burner DL
Sony floppydisk
Cosair Value S. PC3200 DDR-dimm 512MB unbuffered non-Parity, 64Meg x 64, CL2.5
(I have 3 of these but I can only have 2 at a time or the computer wont work)
// TheGamecritic
Congrats on 'Rolling your Own' for the first time. I'm certainly no expert although I have sucessfully built a few. Actually, my specs are almost identical except I'm using Kingston Value Ram instead of Cosair. As far as your first question, I assume you mean the internal USB/MB connectors and the MB audio connector(s). The information is in the MSI Neo2 Plat manual although you have to look closely and move back and forth between the MB schemaic and the section(s) describing the connections to get a clear fix. The MB USB connectors are on the side of the MB furthest from the RAM slots and about in the center, (JUSB1 or JUSB2). The audio connector (JAUD1 is located on the same side of the MB as the USB connectors only near the rear panel end, (close to the orange PCI slot). As you, I found that that I could not use three ram sticks as I could in my old K7 board and when I bought two sets of matched ram I found that it didn't like 4 sticks either. Three: Would'nt post Four: Instability and an initial hit in performance; although I was able to finally coax it to 200mhz Dual Channel it wasn't worth it because of the random crashes n Windows I was getting. I have also discovered the hard way that for some reason my board at least is hypersensitive to IDE cables, (Would not recognize any secondary IDE device on Channel 1 until I found the right cable) and it does not like Sound Blaster audio cards prior to Audigy 2 ZS. Actually, it only tolerates a ZS and I had problems and it didn't like my new X-Fi at all until I moved it to the PCI slot closest to my video card. I was getting random BSODS and crashes, (one that took out my OS). Since I move the card things appear to be more stable, so far. Anyway good luck.

TS3988 trying to buy more storage on the cloud, response is 'there was a problem - try again later' its been doing this over the last two hours - any ideas what the 'problem' is please (assuming its not me) - thanks

trying to buy more storage on the cloud, response is 'there was a problem - try again later' its been doing this over the last two hours - any ideas what the 'problem' is please (assuming its not me) - thanks

Additional info on this:
I strongly suspect this is time machine-related. Even though time machine has been turned off, this happens at intervals of exactly one hour.
A single entry appears in the kernel log at the precise moment the (first) popup error box appears. This is:
"AppleSRP started."
Anyone have any clue how to go about diagnosing or fixing this? I don't even mind trying something brute force (short of wiping the HD and reinstalling lion, which I really DON'T want to do; I don't mind a non-destructive reinstall).

Can Microsoft Please fix this problem! We cannot update to the latest Build!

Microsoft,
We are still stuck at build number 9841.
We cannot update to the latest release build number to do beta testing!
It's been so dead frustrating!
What are you guys been doing?
Can you please fix the problem!

I have downloaded the latest build 9879, I format my hard disk and reinstall the OS with the latest build.
Right after installation, I did a check via the preview build just to make sure I did not get the same error again.
And guess what, I still get the same error again.This is impossible. It should not have that same error again while checking for a new preview build updates!
See the screen shot, see at the watermark build number at the right hand bottom corner.
So what could be the problem then?
Your screen shot shows you are running the latest build, 9879, therefore you will not see a new preview build when checking. I agree that the wording in the message could be better however.

GT70 2OD again microphone problem somebody please fix it

Similar Messages

Maybe you are looking for