GTX 480 will not be supported ?

I built my PC for Adobe Premiere CS5 with GTX 480. Now I'm very worry about this.Does anyone know anything about this ?

/points finger at Marketing door
Eric
ADK

Similar Messages

What will iOS5 features will not be supported on a 3GS?

Everytime a new iOS comes out, the feature set that is supported on the iPhone 3GS gets watered down and watered down. Yeah yeah yeah, I know I need to update my hardware, but it just isn't in the budget this month.
Other than some of the more obvious things, like Siri and mirroring, what features in iOS5 will not be supported on the iPhone 3GS hardware? I thought someone would put out a list, but there is nothing in the wild yet.

A better response: http://support.apple.com/kb/HT4959
Learn which iOS 5 features your iPhone supports:
iOS 5 Feature
iPhone 3GS
iPhone 4
iPhone 4S
Notification Center
√
√
√
iMessage
√
√
√
Newsstand
√
√
√
Reminders1
√
√
√
Twitter
√
√
√
Photo editing
√
√
√
Wireless setup and activation
√
√
√
iCloud
√
√
√
Wi-Fi sync
√
√
√
FaceTime2
√
√
VGA/HDMI out3
√
√
HDR (High Dynamic Range) photos
√
√
Siri
√
AirPlay Mirroring
√
Notes:
Location-based reminders available on iPhone 4 or later
FaceTime requires a Wi-Fi connection. FaceTime may not be available in all countries or regions.
Requires the Dock Connector to VGA Adapter or Apple Digital AV Adapter, sold separately. Video Mirroring only available on iPhone 4S.
For a list of additional features and capabilities available on all iPhone models, see the iOS 5 Software Update page.
Message was edited by: CWulf
Message was edited by: CWulf

I am thinking of installing Lion, but my Quicken software will not be supported on Lion. Does anyone have an alternative that is as good as Quicken?

I am thinking of installing Lion, but my Quicken software will not be supported on Lion. Does anyone have an alternative that is as good as Quicken?

See this thread for a discussion of options.

GTX 750 will not boot with HP P7-1233w

Hello,
I am using an HP P7-1233w Desktop PC and the EVGA GTX 750 will boot to the blue HP Logo screen and after about a minute it will boot to a black screen (and that is it). When I take the card out it boots up just fine. I know my PSU is fine as others have used a GTX 750 Ti with the same OEM HP PSU as mine.
When the system turns on I can hear the card's fans spinning. So I know it's getting power and video. I have tried everything, including clearing CMOS. I have also booted into Safe Mode, disabled the Display Adapter, shut down, and installed the card. Just get the same thing.
The motherboard in my system is a MSI MS-7778 (Jasmine). I thought it may have had something to do with UEFI and Legacy settings, but there are no options in the BIOS and there are apparently no BIOS updates for my motherboard.
If anybody could help me, that would be greatly appreciated.
This question was solved.
View Solution.

Hi,
The HP P7-1233w was released in May 2012 and HP didn't start to ship full UEFI level consumer desktop PCs until the middle of October 2012.
Changing out the motherboard to a UEFI motherboard would require a new Windows 8 license. Windows 7 will not run in UEFI mode without some special hacks.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Built's Which will not be supported in FORMS9I

Hi all
Is there any list or Document which give's Details of BULIT-INS And others
Which no longer will be supported in FORMS9I But are currently available in FORMS6I.
So that during the development we should avoid to use those and it will be much
Easier to migrate the Application to the 9i later on.
regards
jai

Hi Duncan
Thanks for Reply .
i understand the Forms9i will work only in web-env not in client-server mode
whats the logic behind this?? i mean why client/server is not supported and
what if some needs this feature?

Re: CX-480 WILL NOT START UP

Looks more like a hardware problem to me.
Find the nearby Service Center for help.
http://www.msi.com/page/service-location/

Be careful with how you consider the fan noise.
Quote:"How strong the fan runs depends on CPU and GPU's loading."
If you're running heavy loading games, then the fan should be running at full speed to give the best heat dissipation for your not...

I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

I have a RCA media streamer that will not connect to my network with a new airport extreme.

I have a RCA media streamer (Model # DSB872WR) that will not connect to my network with a new airport extreme.I had to create a new network and my computers are connected but media streamer will not. Can anyone help? Thank you

Hi, papineaubill!
Welcome to The Canon Forums, and thank you for your inquiry!
We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market. If you live outside the United States, please click here and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Thanks for choosing Canon!

I have a Canon MX420. The scanner WILL NOT connect to my PC. I am ready to toss Canon products!

I have been several months now, unable to scan anything. It always tells me either the usb cable is not connected, or the scanner is shut off. I followed ALL DIRECTIONS to connect this device -- I even bought a new cable, all to no avail. I have read many posts and suggestions, and again nothing seems to help. I have uninstalled and then reinstalled the program - again with no results. All other components of this device seem to work great. Also, when I first purchased the device, it worked great. Then, several months back, it failed to recognize the scanner. I really wondered about a new cable, etc., and finally bought a good one, but it didn't help. I hate to trash the device just because of the scanner, as somehow it seems a simple 'correction' would get things back in order; however, no one seems to have any suggestions that actually work.
I have made sure to follow the dirtections to a "T" regarding setup -- and must have succeeded initially, as it used to work. I use Internet Explorer 11.0.16 . I have totally updated drivers in all areas.
Any and all help would be appreciated. I am not a 'whiz' when it comes to computers, so if anyone is interested, I would appreciate a response at my email address of [email address removed in accordances with privacy guidelines], as I had a difficult time finding this website.
Thank you sincerely,
Wm. D. Davis

Hi, papineaubill!
Welcome to The Canon Forums, and thank you for your inquiry!
We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market. If you live outside the United States, please click here and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Thanks for choosing Canon!

Apple TV will not let me play a rented iTunes movie... Help

I Keep getting a message that my "device does not support protected movies" or something rather when I try to play my rented movie. I have paid for the rented movie. Please help.

Is your monitor HDCP compliant? Refer to your TV manual if unsure.
Make sure HDMI cable is secure, try a different port and cable
If you are using an adapter (i.e. not a straight HDMI connection) that will not be supported.

Ipod is disabled and will not respond

My Ipod in Disabled and will not respond

http://support.apple.com/kb/ht1212
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

I am looking at buying a new iMac but not sure if I need the Nvidia Geforce GTX 680 MX 2GB or put the money into Memory I will not be gaming

I am looking at buying a new iMac but not sure if I need the Nvidia Geforce GTX 680 MX 2GB or put the money into Memory I will not be gaming
New to the iMac and apple

Welcome to the Apple Support Communities
If you aren't going to use your Mac for anything special (Final Cut, Aperture, Photoshop, games...), you don't need that graphic card and you will save money.
Also, as it looks like you are going to buy the 27-inch iMac, I recommend you to buy the Mac with 8 GB of memory, and then, buy the memory that your iMac needs in OWC or Crucial (the iMac supports 32 GB of RAM) > http://eshop.macsales.com/shop/memory/iMac/2012_27/DDR3L
Doing this, you will save a lot of money. Also, it won't void the warranty of the Mac. If you need help installing the RAM, see > http://support.apple.com/kb/ht5540

Installed WIndows 7 & correct bootcamp drivers, windows will not activate "hot fix" or "Support drivers"

Hello, i hope someone can help,
i have repeated this whole process 3 times already, it has taken 8 strait hours of my time and i still have had no success.
QUICK SUMMERY
To put it simply, After windows is up and running on my mac, the wireless network wont work, so i cannot download the hot fix, and the support driver files from bootcamp will not open because it says they are not "32 Valid" ?. But im using a 64bit disk.
The wireless network adaptor automatically doesn't work on windows right after installation,
so i had to load the Hot Fix onto an SD card along with the bootcamp drivers, then open the hotfix file in windows.
The first time i was able to install the fix, windows restarted and installed the update, logged back on... and nothing changed.
At that point i attempted to open the "Setup" file in the bootcamp support folder, and an error message came up saying it wasn't valid.
LONGER EXPLANATION OF MY COMPLETE PROCESS: (to cancel out any questions)
i was able to find my support driver from here:
http://swscan.apple.com/content/catalogs/others/index-leopard-snowleopard.merged -1.sucatalog
its some old fashion coded page that has a bunch of apple drivers you can download by pasting one of the codes in your browser,
i searched for bootcamp support drivers, and found the code for my exact model (Mac Pro 8,2)
i was able to manually downloaded the drivers instead of using bootcamp assistant.
As a side note,
i was able to download the bootcamp drivers via boot camp assistant after the 5th try,
so now i have both files that i know are supposed to work 100%. they are loaded and unzipped on an SD card like they are supposed to be for when i open windows.
I have a Genuine Windows 7 Home Premium x64 bit CD from the inlaws so i used that CD after i partitioned my drive in bootcamp.
Bootcamp run like it was supposed to, and i followed step by step instructions in this video: https://www.youtube.com/watch?v=uVfRQ0YIDUI&feature=related
once windows was finished installing,
it automatically would not detect a network card, so i couldn't connect to the internet and download the apples bug fix. (The Hot fix)
instead i downloaded the hot fix on a separate SD card, turned windows back on and loaded the hot fix from the SD card.
Windows installed the hot fix update, restarted, but nothing changed.
Ive even tried skipping right to uploading the drivers, and windows wont activate the support because it says its not "32 Valid"
I completely removed windows 7 vis bootcamp to rinse and repeat hoping i made a simple mistake, but no same thing happened.
Conclusion
-im Wondering if i should "Istall important Windows Updates" during the begining of windows preperation...
maybe that will fix the issues of it not reconizing wierless network, and not being able to upen up the bootcamp file?
(it says you are not supposed to install any windows updates untill the HOT FIX and BOOTCAMP SUPPORT is activated on windows)

Keith Doherty3 wrote:
You have been too cleaver for a Boot Camp install.
The partition system does NOT like anything other than a standard arrangement which creates 4 partitions.
EFI -200mb
OSx - Extended Journaled
Buffer-200mb
Windows -NTFS
Return to OSx -Open Boot Camp tool from the utilities folder reset to a single partition.
Start again and when you get to Windows - Let all the drivers load on the CREATED partition. Use the External for storage !
Just for your information, as it doesn't seem you have ever used BC.
When starting the boot camp assistant the first thing it want to do is download the Windows Support drivers and asks you to save them to a DVD, it will also allow you to save them to your OS X hard drive or to any drive connected to the system. Once those drivers are downloaded it then starts the Win install. What you must do is copy those support drives to a media that Windows can See and Read from. Like a DVD or a thumb drive formatted FAT32
No where in the OPs post does he say anything about fooling with any partitions on his internal drive other then creating the BC partition.
His problem is he saved those support files to a Mac OS X formatted external drive. Windows can not read Mac Extended (Journaled) formatted drives. So he can't load the drivers for Windows until he copies those support files ove to something that Windows can read.

Hi there can anyone help as i am unable to contact Apple for support with my printer which will not print after recent software update? this is the email i tried to send to apple with no success, can anyone help please.......Dear Apple, I'm pulling my hai

Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
Brian

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0.

GTX 480 will not be supported ?

Similar Messages

Maybe you are looking for