Guidance needed for KM and Collaboration

Hi All,
I am new to the EP platform.I would be grateful if anybody can help me out with these questions:
1)When I have EP 6.0 installed,does that mean 'Collaboration' capabilities under 'people Integration' are also available to me?
2)If yes,how and where do I start for the 'collaboration' functionality.How do I set up a virtual room for sharing documents.
3)If 'collaboration' requires separate installation from EP6.0,then how do I install it?
thanx in advance,
Prasanna

Hi Prasanna,
to specify PK's answer more clearly for someone who is new to EP.
1. When you install EP6.0 you have the option to install the Platform only or EP6.0 Platform and KMC (Knowledge Management and Collaboration).
2. Installing also KMC you have all the collaboration functionalities in PCD roles. You have to assign yourself this roles (com.sap.netweaver.coll.*) in order to use the collaboration rooms. i.e.: After assigning the role com.sap.netweaver.coll.CollaborationRoomCreation you can go on Collaboration -> Rooms -> Room Creation in order to create a collaboration room for sharing documents.
3. The most important thing is that after the Installation of EP6.0 Platform and KMC you have to do initial configuration tasks as described in the Administrator Guide on help.sap.com/ep -> Collaboration. Without this tasks you can not use Instant Messaging, Application Sharing or other collaboration features.
Hope that clarifies things,
Robert

Similar Messages

What charging adapters do I need for Finland and England

What charging adapters do I need for Finland and England

Bring the power adapter that you got with your phone - you just need to get an adapter for the plug into the wall. You don't need a converter.
Airports usually sell the adapters and stores that sell luggage often have them also.
~Lyssa

HT1414 how much disk space is needed for backup and restore.

i want to unlock iphone,for this how much disk space is needed for backup and restore activiti

OK... now subtract the music. That's not part of the iPhone backup. Neither are apps, but in app data is.
Why are you asking? Did you get an error? If so, then clear out some disk space.

I bought one pack for need for speed and it didn't give it to me then I just took $25.00 away from me

I bought one pack for need for speed and it didn't give me anything and it also took $25.00 from my account what should I do?

Contact iTunes:
Contact iTunes
Or
How to Get a Refund from the App Store

What licenses do I need for CUCM and CME

Hi Experts,
I am a newbie to Cisco IP telephony and request your guidance.
My boss has asked me to order some 7942 phones for a CUCM based site and some 7942 phones for a CME based site.
For CUCM 9, I understand that we need an enhanced user licenses on CUCM side.
For the IP phone, I see 2 part numbers and am confused.
CP-7942G - Cisco Unified IP Phone 7942G
CP-7942G-CH1 - Cisco Unified IP Phone 7942G, for Channels, with one station user license
What is the station user license mentioned in the part number CP-7942G-CH1 ? Is it the same as the enhanced user licenses? Assuming i am ordering enhanced user licenses, what should I order CP-7942G or CP-7942G-CH1?
I also see a part number SW-CCM-UL-7942= ? What is this part? is it needed?
And what do I need for CME?
Is FL-CME-SRST-10 enough for the CME?
What is the part number for the phones? Is it CP-7942G or CP-7942G-CCME?
I also see another part number "SW-CCME-UL-7942="? What is it? And is it really needed?
I heard that Cisco simplified Licensing from version 9. At least it doesn't look simple to me :(
Can you please help me, Experts?
Thanks,
Pete

Hi without knowing your business goals, current network, etc here is some feedback.
Depending on your design, if the sites are connected via a reliable WAN you could run the branch site as SRST and not CME, this way you get a rich feature set of the centralised call manager and simplify licenses, etc.
Anyway, you need to size your CUCME (or SRST) correctly as each Cisco router hardware platform has a maximum supported handsets. If you have a SIP provider new purchased ISRs now come with 10 CUBE licenses other wise you will need something else such as a VIC for dial tone.
For instance the following is a router that comes with 25 CME
C2901-CME-SRST/K9
2901 Voice Bundle w/PVDM3-16,FL-CME-SRST-25,UC Lic,FL-CUBE10
You can add CP-7942G-CCME which is the physical phone and license for CME
Use CP-7942G= for the Call Manager Deployment as you will get UCL Enh or CUWL for the user side
If you have existing routers you will need to obtain upgrade licenses for voice/CME add DSPs if needed for conferencing, media termination, etc, CUBE or voice cards and you can add the phones.
Router handset capacities see Table 7
http://www.cisco.com/c/en/us/products/collateral/routers/2900-series-integrated-services-routers-isr/data_sheet_c78_553896.html
Hope this helps

Satelitte Pro A200 PSAE4E - What BIOS I need for update and how to do this?

Guidance please on A) the correct update version required B) the process
A) the machine came with Vista installed but it was down graded to XP to work on the Win2003/XP network.
The current bios Vers V5.20 do I upgrade to Vers 2.60 - win 32 (vista) or 5.60 Win
B) Toshiba FAQ - FAQ Ref.: TRO0000000b07 lists how to upgrade the bios unfortunately it does not list the Satelitte Pro A200 - so what is the procedure - thanks in anticipation.

Hi!
If you want to update the BIOS you need the version 5.60. The other version are for Vista and only 5.60 is for XP and so its the right one for you.
The BIOS update procedure is pretty easy. The update is Windows based that mean you can update it on Windows. Therefore extract all files from the zip archive and start the exe file. Then your BIOS will be updated.
But before you update it, close all running programs even your AntiVirus and Firwall and connect the AC/DC adaptor.
Good luck!
Bye

Raw updates needed for CS5 and Elements 11?

I have several adobe products. I want to install the latest raw updates for CS5 Photoshop and Elements 11. The app. manager tells me I have the latest updates. My CS6 product updated the newest raw product but not my others. I would like to get phone support for these issues - is there a phone number that connects to real people? The %^*()^ support section on the web takes me around in circles - very frustrating. Any help out there?

the good old argument is at what point do you stop supporting stuff? Elements is now up to 13.
I assume Adobe would argue you have cc already why are you still using cs5?
As I read it, the new 8.7 raw is only good for cs6 and above. They won't make 2 versions of raw, so I assume you are still on 7.4 for cs5?
On that basis, alas stick with your cs6 to do the newer stuff you need.
that all said, a bit of manual tweaking seems to work for some people. - Camera Raw 8.1 and PSE 11 - Elements Village

How can I get to the files I need for school and jobs? It only allows me to go to my photos.

I Am having problems getting to my files so I can submit papers for school and to send in resumes. It will only let me go to my pictures it will not let me go to my files I need.

What are you talking about? What will only let you go to your pictures? Where are the files stored? What app are you attempting to access them with? And what does this have to do with AppleWorks, which has been discontinued for years?

Urgent need for AP and PO test scripts/scenarios and training user manuals

Hi There,
Can anyone send me test scripts/scenarios and training user manuals for AP and PO
Please send me the docs as soon as possible on [email protected]
I will really appreciate your help.
Regards
Kush

Dear
this topics must be included in the testing scenario
1-Enter Supplier Data Enter information for a given supplier, including supplier sites/addresses
2-Create Invoice Batch: Enter information for Invoice Batch header
3-Create a Standard Invoice: Enter information for a standard invoice in an invoice batch
4-Invoice Distribution: Enter information details of a selected invoice
5-Schedule Payment Create Payment Schedule
6-Create a Credit Memo: Enter information to create a credit memo
7-Create Employee Exp:Enter information for an Employee Expense report
8:Validate an Invoice: Validate an Invoice
9-Account an Invoice: Create Accounting Entries for an Invoice
10-Create a Quick Check: Enter data to create a Quick Payment
11-Select Invoices for Payment:Enter data to create a preliminary list of invoices to pay, review the list, and do some changes.
12-Format and Print a Payment Batch: Perform tasks required to Format a payment batch
13-Confirm a Payment Batch:Perform tasks required to Confirm a payment batch
14-Transfer to General Ledger

Guidance needed for a decision

Hi all,.
I will be extreamly thankful if you will resolve my following queries.
1)Will you please tell me what exact abap is used by SCM/CRM/SRM-Technofunctional.
2)Secondly being an ABAPer is it manageble to learn SCM/CRM/SRM functional without domain experience.Are these candidates without domain exp. considered by organisations in india as well as overseas.
3)Also please tell me which of these (SCM/SRM/CRM)funtional side of higher end modules is best suited for ABAPer and also marketwise.
Thanks.
Edited by: sandeep d on Jul 11, 2008 1:03 PM
Edited by: sandeep d on Jul 11, 2008 1:05 PM

Hi Sandeep,
1) ABAP is used different Technofunctional tools like CRM,SCM,SRM..........
now market is good for ABAP CRM is technical as well as Functional, ABAP-SCM is the major technofunctional skill now coming up the market.....
2) I think its domain experience is must.... to learn these skills.
Regards,
Skumar

Add-ons needed for Small and Medium Plastic Industries..

Hi Experts,
I am working on a project in SAP Business One for a SME which is a Plastic Industry..I would like to know what are the add-ons needed for Plastic Indusrties?
Regards
Ashim

Hi Ashim
I assume you are referring to handling the production process? Have you looked at Fourth Shift? Anything special you could mention regarding this customer?
Kind regards
Peter Juby

Hardware needed for wifi and stay hard wired to Mac

I just got an IMAC and I want to set-up my wireless network. My kids have Ipod Touches and I want to stream music over the stereo instead of them plugging directly into it. The stereo is up stairs and the Mac is down stairs next to the modem. I still want to stay hard wired into the Mac though. To do this do I need Airport Extreme and Airport Express or just get wireless router and Airport express?

Lager, Welcome to the discussion area!
Sorry but there is no way to wirelessly stream music from an iPod touch to the stereo.
The AirPort Express (AX) can accept music streaming from iTunes and send it out to a stereo via its sound output port. However iTunes must be running on a computer.
You could use any 802.11b/g compatible wireless router with 2 or more Ethernet ports connected to the modem. Your iMac would connect via Ethernet to that router. Then place an AX next to the stereo and configure it to join the wireless network provided by the wireless router.
This will give you the ability to stream music from iTunes running on your iMac to the stereo.
BTW, there is an iPod touch application which allows you to remotely control the iTunes running on your Mac so that you could change the music from the iPod touch.

Advice Needed for Audio and MIDI Controller Software

I am hoping someone may be able to give me advice on how I should approach my problem.
I am currently running a live show with audio backing tracks and a small 12 par lighting system. The light system can be controlled via standard MIDI. I am using iTunes to play back sets of backing tracks, and manually controlling the lighting system using a dedicated foot controller.
What I would like to do, is be able to use software to simultaneously play audio files and perfectly sync the lighting (fades, shots, etc. via midi) with the audio track. Ideally, I would be able to have the audio/lighting paired as discreet entities that could be grouped into sets.
i.e.
Audio-MIDI_1 = Audiotrack1 would always be paired with Lightcontroller_MIDI_events1
Audio-MIDI_2 = Audiotrack2 would always be paired with Lightcontroller_MIDI_events2
Audio-MIDI_3 = Audiotrack3 would always be paired with Lightcontroller_MIDI_events3
I could the create a set of Audio-MIDI_x tracks which could be triggered in any order.
I would like to have to option to be able to activate a single track, or have a complete group of tracks activated sequentially (but be able to stop the and start the group as needed - you never know what will happen in a live situation). It would be nice to have a time-line UI as well.
Now the final requirement: it should be able to run on a PISMO PowerBook. <cringe>
I hope I am not too confusing.
I am thinking MainStage would not be the software for this task as Leo is not an option for the Powerbook.
I have looked at QLab and showcontrolpro, but I don't think theses are right for me either.
Any help or suggestions would be greatly appreciated.
TIA

Gary,
With a Pismo you really are confined. I've been using some software from Alien Apparatus called Solo Performer Show Controller (www.alienapparatus.com) and it has a timeline to sequence lights where you can run 32 channels of midi or dmx lighting. The only setback is it needs at least a 1 GHZ processor. There may be a company like Sonnet that has an upgrade for your processor.
The software is able to run backing tracks, send midi controls to effects units or other software, send hotkeys for apps, synchronize lyrics in a window or on an external monitor, controls a dmx fog machine, and also has a six button usb foot controller which can be configured for many things such as scrolling your songlist to select the next song, change volume of tracks, change a light scene, send a hotkey, trigger samples, etc. It is a bit pricey at just under 600 dollars but the foot control is durable, the company has excellent support and they listen to users to add features to the software.
Hope this helps
Thor

How big a hard drive do I need for iMac and Time Machine?

Sorry if this has been answered elsewhere already. I am going to buy an iMac, probably the new 24" with a 320G internal HDD. I already have one Lacie external 320G HDD so I was wondering whether I can use this for Time Machine backups, or do I need to buy a bigger one? If so, how big? Is there a rule of thumb for working out how much hard drive space you need to have for Time Machine, for instance if I were to buy the 500G iMac what would I need?
thanks.

I agree with the "double the size" rule of thumb. You should also consider how much of the 320GB you are actually using and are likely to use in the next year or two. After all, it's the amount of storage you use that matters, not the size of the disk. Disks will very likely be cheaper soon. You should also keep in mind that TM deletes old archive data when it runs out of disk space. So as long as you have more disk space than you have data to back up, TM will work, though you will lose older versions of your data.
So if your 320GB drive only has 100GB used and you're not the kind of person who eats up disk like there's no tomorrow, the 320GB drive should be fine for now. If you expect that 320GB disk to be full soon then a 750GB TM disk is more like what you need.
The same logic applies to a 500GB iMac. If you only expect to use 250GB in the next year or two then a 500GB TM disk should be OK. A 1TB drive will be a lot cheaper next year or the year after.

What do I need for Mic and Guitar?

I'm new to GB. I have ilife 11.
I've got a few electric guitars and a condenser mic (phantom power). What do I need to plug them into my Macbook Pro?
I don't want to spend too much money and am looking for something that works well, sounds good and is hassle free (plug and play) I just want to lay down some demos.
Something like this? It really does not have great reviews.
http://www.amazon.com/M-Audio-US44010-Interface-GT-Player-Software/dp/B00061ZM2Y
What do you guys and girls recommend? A little direction would be much appreciated!

If you can push your budget up to $249, you'd be doing yourself a HUGE favor. This gives you the ability to pick up the Apogee One. Apogee is a company that's well respected, and makes really good stuff. This has a mic input, guitar input, made for Mac. http://www.sweetwater.com/store/detail/One/
The M-Audio stuff gets pretty good as you step up into the higher priced models and the firewire ProFire stuff, but it's hard to beat the Apogee One as an entry level interface.
In my opinion, anything that costs less than $249 (the lower end M-Audio stuff) is simply not very good. If you're going to spend the money, make it worth it.

Guidance needed for KM and Collaboration

Similar Messages

Maybe you are looking for