Had to restart information store service. Caused by throttling?? Event ID 1010 from ManagedAvailability, any where else to look for error logs?
For some reason we had to restart the information store service. So far I came up with these logs from the
ManagedAvailability event logs. If there some where else to check for additional information? It looks like the throttling allowed a failover?!
DatabaseFailover-00cb58bd-0115-4478-b4aa-fe60dce2757a-DatabasePercentRPCRequestsDatabaseFailover: Throttling allowed the operation to execute
Starting recovery action (Action=DatabaseFailover, Resource=00cb58bd-0115-4478-b4aa-fe60dce2757a, Requester=DatabasePercentRPCRequestsDatabaseFailover, ThrottlingMode=None)
Recovery action failed. (Action=DatabaseFailover, Resource=00cb58bd-0115-4478-b4aa-fe60dce2757a, Requester=DatabasePercentRPCRequestsDatabaseFailover, Error=Microsoft.Exchange.Cluster.Replay.AmDbMoveOperationNotSupportedStandaloneException: An Active Manager
operation failed. Error: The database action failed. Error: This operation is not supported on standalone mailbox servers.
at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan timeout)
at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MoveDatabase(Guid mdbGuid, MountFlags mountFlags, UnmountFlags dismountFlags, DatabaseMountDialOverride mountDialOverride, AmServerName fromServer, AmServerName targetServer,
Boolean tryOtherHealthyServers, AmBcsSkipFlags skipValidationChecks, AmDbActionCode actionCode, String moveComment, AmDatabaseMoveResult& databaseMoveResult)
at Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClassc.<MoveDatabaseEx>b__b()
at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String databaseName, RpcServerOperation rpcOperation)
--- End of stack trace on server (XMNWDEX001.Xamin.com) ---
at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String databaseName, String serverName, RpcErrorExceptionInfo errorInfo)
at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint rpcOperationHint, IADDatabase database, String targetServer, InternalRpcOperation rpcOperation)
at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MoveDatabaseEx(IADDatabase database, Int32 flags, Int32 dismountFlags, Int32 mountDialOverride, String fromServer, String targetServer, Boolean tryOtherHealthyServers, Int32
skipValidationChecks, AmDbActionCode actionCode, String moveComment, String& lastServerContacted, AmDatabaseMoveResult& moveResult)
at Microsoft.Exchange.HA.ManagedAvailability.ManagedAvailabilityHelper.PerformDatabaseFailover(String componentName, String comment, Database database)
at Microsoft.Exchange.Monitoring.ActiveMonitoring.Responders.DatabaseFailoverResponder.InitiateDatabaseFailover(String databaseGuidString)
at Microsoft.Exchange.Monitoring.ActiveMonitoring.Common.ThrottledRecoveryAction.Execute(Boolean throwOnException, TimeSpan timeout, Action`1 action)
at Microsoft.Office.Datacenter.ActiveMonitoring.ResponderWorkItem.InvokeResponder(CancellationToken cancellationToken)
at Microsoft.Office.Datacenter.ActiveMonitoring.ResponderWorkItem.CheckCorrelationAndInvokeResponder(MonitorResult lastMonitorResult, CancellationToken cancellationToken)
at Microsoft.Office.Datacenter.ActiveMonitoring.ResponderWorkItem.<>c__DisplayClassb.<>c__DisplayClassf.<DoManagedAvailabilityWork>b__9(ResponderResult lastResponderResult)
Hi,
Based on this event log, I find the error “Error=Microsoft.Exchange.Cluster.Replay.AmDbMoveOperationNotSupportedStandaloneException” and error “Error: This operation is not supported on standalone mailbox servers.”
This error seems that there is unsupported configuration in your Exchange deployment.
I will be very glad to help if you explain your Exchange server deployment for more details.
Thanks.
Similar Messages
-
Each time I restart this exchange server, the Information Store and System Attendant don't start. If It try to manually start the services, I get the follow errors:
Event ID 5003:
Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed. This may be caused by a time change either in the client or the server machine, and may require a reboot of that machine. Other than that, verify that your domain is properly configured and is currently online.
Event ID 1005:
Unexpected error The clocks on the client and server machines are skewed. ID no: 80090324 Microsoft Exchange System Attendant occurred.
The clocks on the domain controllers and the exchange server are set to the same time zones. As well, all three clocks are in sync down to the second. Any ideas on what's causing this and how to fix it?Run this Command from the Exchange Server
Net time \\ADServerName /Set
and confirm the action,
and then you need to restart the service
Microsoft Exchange Active Directory Topology Service
and confirm you are not getting the Error 4001 in the event Viewer.
Thank you, it resolved my issue after being sweating looking for solution.
How can I prevent this from happening? I cannot restart services on each server reboot nor lose 5 years of my life!!!
Sokratis Laskaridis MCP, MCTS, MCITP, Small Business Specialist Netapp ASAP, Symantec STS -
Exchange Server 2013- Information Store Service not starting
Hi Everyone,
We are having an issue with one of our Exchange Servers that is running Exchange Mailbox server role.
Server : Exchange 2013 CU3 , Windows Server 2012 R2
We noticed on Friday that its "Information Store Service" has stopped working and we try to manually run it (Services->Microsoft
Exchange Information Store Service -> Start)
Service didn't start and gave : Error 0x80004005 Unspecified Error
Trying to start the service using the command line using: net start MSexchangeIS gave us a different error:
System Error 16389 has Occurred
The system can not find message text for message number 0x4005 in the message file for BASE
Event viewer has (Event ID : 7031):
The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Since we have got this error we have tried some fixes such as Checking Time synchronisation and IPv6 issues. But nothing
seems to have caused this. We have rebuild the windows server from scratch and used the recover server switch to rebuild the Exchange server. Still the same issue.
Any help would be greatly appreciated.Hi Tiraj,
Any update? Does the issue still occur after install Exchange server on Windows Server 2012?
I wonder if the issue occurs suddenly or did you configured something on database.
In addition, overload on server could also cause the issue.
Regards,
Rebecca Tu
TechNet Community Support -
Information Store service terminated unexpectedly, event id 7031
We have Exchange 2010 (coexistence with 2003) running SP3 and a DAG with two members. It now happens occasionally that suddenly all mailstores are running on mailbox server. I had them balanced (manually) on one, so I examined the event viewer. There I saw
The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
EVENT ID 7031
A few seconds later it is started again. But since several mailstores are running on it, it takes some time before all stores are mounted again and so users complain that Outlook disconnects. The time it is down, is too short for the DAG to switch over to
the replica, so we have a real downtime here.
Is this a known issue and what can we do for this? I really need to fix this ASAP as you can understand, since we have like 1500 users already now on this environment. I saw this fix:
http://support.microsoft.com/default.aspx?kbid=2803727
In there also two issues with information store being stopped are reported here.
Thanks for all your help!Thanks Gulab,
No, no major change. We are only moving mailboxes now from the old 2003 to the new 2010 server. I have seen that this happened for a long time already, but probably never during working hours. There is no actual trend. Today it happened once. Yesterday it
happened like 5 times. other days, just once a day, a few times never.
We are running TM Scanmail.
Here the full details
System
Provider
[ Name]
Service Control Manager
[ Guid]
{555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName]
Service Control Manager
EventID
7031
[ Qualifiers]
49152
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8080000000000000
TimeCreated
[ SystemTime]
2014-01-14T09:16:32.732892000Z
EventRecordID
90280
Correlation
Execution
[ ProcessID]
672
[ ThreadID]
6532
Channel
System
Computer
xxx162.eu.ykgw.net
Security
EventData
param1
Microsoft Exchange Information Store
param2
1
param3
5000
param4
1
param5
Restart the service
4D005300450078006300680061006E0067006500490053000000 -
RPC request to the Microsoft Exchange Information Store service for log truncation
Hello all
Running Exchange 2013 CU3 on Windows 2008R2 sp1 in a two node DAG. We are seeing the bellow warning when running a backup. How to resolve this?
RPC request to the Microsoft Exchange Information Store service for log truncation failed for database CoramB3\Servername. Error: Failed to notify source server 'servername.coram.com' about the local truncation point. Hresult: 0xc8000713. Error: Unable to find
the file. Also log files are not being flushed
Bulls on ParadeHello,
Please verify backup software.
Please use vssadmin list writers command to check the status of the VSS admin. If it is in a
failed state, please restart the Exchange replication service and then check the status again.
Please use Get-MailboxDatabaseCopyStatus cmdlet to view health and status information about mailbox database copies.
Please use Get-DatabaseAvailabilityGroupNetwork “DAG Name” | fl cmdlet to view configuration and state information for a DAG network.
Please use Get-DatabaseAvailabilityGroupNetwork DAG Name\MAPINetwork | fl cmdlet and Get-DatabaseAvailabilityGroupNetwork DAG Name\ReplicationNetwork | fl cmdlet to
check configuration information for MAPI network and Replication Network.
If the above configuration information is ok, please check if there are other related errors in application log.
Cara Chen
TechNet Community Support -
Hi,
I created a mailbox few days before, everythign was working fine and suddenly when some one tried to send email on that mailbox it bounced back with following error:
There's a problem with the recipient's mailbox. Microsoft Exchange will not try to redeliver this message for you. Please try resending this message, or provide the following diagnostic text to your system administrator.
Sent by Microsoft Exchange Server 2007
Diagnostic information for administrators:
Generating server: Mail01.abc.com
[email protected]
#550 5.2.0 STOREDRV.Deliver: The Microsoft Exchange Information Store service reported an error. The following information should help identify the cause of this error: "MapiExceptionNotFound:16.18969:9A000000, 17.27161:00000000CC000000000000000600000000000000,
255.23226:00000000, 255.27962:FE000000, 255.17082:0F010480, 0.26937:94000000, 4.21921:0F010480, 255.27962:FA000000, 255.1494:00000000, 255.26426:FE000000, 4.7588:0F010480, 4.6564:0F010480, 2.17597:00000000, 2.25805:00000000, 4.8936:0F010480, 4.14312:0F010480,
4.2199:0F010480, 2.25805:00000000, 4.8936:0F010480, 2.22957:00000000, 2.19693:00000000, 2.17917:00000000, 2.27341:00000000, 4.8936:0F010480, 4.17097:0F010480, 4.8620:0F010480, 255.1750:0F010480, 0.26849:0F010480, 255.21817:0F010480, 0.26297:0F010480, 4.16585:0F010480,
0.32441:0F010480, 4.1706:0F010480, 0.24761:0F010480, 4.20665:0F010480, 0.25785:EC030000, 4.29881:0F010480". ##
Original message headers:
Received: from Mailbox.abc.com ([fe80::892d:93d6:b1ac:b70a]) by mail01
([10.72.0.95]) with mapi; Fri, 11 Jan 2013 14:04:55 +0500
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: Anwar Amjad <[email protected]>
To: All-HEC <[email protected]>
Date: Fri, 11 Jan 2013 14:04:53 +0500
Subject: FW: Suggestions & New Arrival in HEC Library
Thread-Topic: Suggestions & New Arrival in HEC Library
Thread-Index: Ac3vHgwR50OLs2BnQuOzo9jWg4e1gQAvJtUw
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-Auto-Response-Suppress: DR, OOF, AutoReply
After this error, i treid to send email again and there is no error and email was delivered. What was the cause of this error?
HasanHi,
I tried to start seeding again but it is at same status. I will try again and hopefully it will get resolved.
But, yesterday i ran in to the most complex issue i have ever seen with Exchange.
There was a unexpected power cut at our datacentre due to which both the nodes went down.
After that both the nodes came up. But the all 3 databases were dismounted.
Therefore, i ran Eseutil /mh resulting dirty shutdown.
I was able to repair 2 databases.
But the 3rd one was not mounting with below error.
Microsoft Exchange Error
Failed to mount database 'Mailbox Database'.
Mailbox Database
Failed
Error:
Exchange is unable to mount the database that you specified. Specified database: XXXXX\First Storage Group\Mailbox Database; Error code: MapiExceptionJetErrorAttachedDatabaseMismatch: Unable to mount database. (hr=0x80004005, ec=-1216).
I was able to mount database somehow. There are 7 User mailboxes (Tier 1) on this database.
All emails sent to the users in this database are bouncing back with the below error.
This storage groups holds the mailboxes of my Senior Managements. And their mailboxes are down for almost 20 Hrs. I am spinning my head since yesterday but not able to find any fix. Can you please guide me in this concern.
Best Regards
K2
Kapil Kashyap -
Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f.
PLease help, I've rstored from backup three times with no success I'm getting the following error
"Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f. "
It's LDap related but i have no idea why :-(
Best Regards BernhardIPv6 had been disabled for months on my SBS 2008 Server running Exchange 2007 SP1. I ran 40 or so Windows Updates; subsequently, the next morning Exchange was no longer running; topology issues, event ID 2604, 2114 and 2601 were all over my Application
Log. After 12 hours of research I found this post; figured it was worth a shot and instantly all my services for Exchange fired up. Thanks for the tip; I have no idea which update changed what in regards to needing IPv6 enabled, but that silly
little check mark fixed it.
Thank you for sharing your solution!
Dan -
Exchange information store service is not starting on exchange 2010
i've run the updates on the exchange 2010 and restart the servers, after one week i've restart the 2003 dc and exchange 2010. now exchange information store service is not starting on exchange 2010 and the database are dismounted
help plsI have just installed Exchange 2010 on my system and when trying to mount the database it fails. The Information Store service will not start on my server. Time is in sync with the DC and the initial install went fine. I have the following
from event viewer:
Cmdlet failed. Cmdlet Mount-Database, parameters {Identity=dellstslab}.
details
System
Provider
Name]
MSExchange
CmdletLogs
EventID
6
Qualifiers]
49152
Level
2
Task
1
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-02-18T16:43:34.000000000Z
EventRecordID
107
Channel
MSExchange
Management
Computer
Exchange2010.dellstslab.com
Security
EventData
Mount-Database
{Identity=dellstslab}
dellstslab.com/Users/Administrator
S-1-5-21-2431095704-2869583948-1116897492-500
S-1-5-21-2431095704-2869583948-1116897492-500
ServerRemoteHost-EMC
1412
14
00:00:01.1388073
View Entire Forest:
'True', Configuration Domain Controller: 'WIN-NVOVSE1R716.dellstslab.com',
Preferred Global Catalog: 'WIN-NVOVSE1R716.dellstslab.com', Preferred Domain
Controllers: '{ WIN-NVOVSE1R716.dellstslab.com }'
System.InvalidOperationException:
Couldn't mount the database that you specified. Specified database: dellstslab;
Error code: An Active Manager operation failed with a transient error. Please
retry the operation. Error: Database action failed with transient error. Error:
A transient error occurred during a database operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 [Database:
dellstslab, Server: EXCHANGE2010.dellstslab.com]. --->
Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperTransientException: An Active
Manager operation failed with a transient error. Please retry the operation.
Error: Database action failed with transient error. Error: A transient error
occurred during a database operation. Error: MapiExceptionNetworkError: Unable
to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Exchange.Data.Storage.AmServerTransientException: An Active Manager
operation failed with a transient error. Please retry the operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to
make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 at
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult,
SafeExInterfaceHandle iUnknown, Exception innerException) at
Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain,
String password) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid,
MountFlags flags) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()
at
Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode
opCode, Action operation) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, AmDbActionCode
actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of inner exception stack
trace (Microsoft.Mapi.MapiExceptionNetworkError) --- --- End of stack trace on
server (Exchange2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint
rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String
serverToRpc, Guid dbGuid, AmMountArg mountArg) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags
storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs ) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler
ev) --- End of inner exception stack trace
(Microsoft.Exchange.Data.Storage.AmServerTransientException) --- at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan
timeout) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags,
DatabaseMountDialOverride mountDialOverride, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of stack trace on server
(EXCHANGE2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint
rpcOperationHint, Database database, String targetServer, InternalRpcOperation
rpcOperation) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags
storeMountFlags) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperTransientException:
An Active Manager operation failed with a transient error. Please retry the
operation. Error: Database action failed with transient error. Error: A
transient error occurred during a database operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Exchange.Data.Storage.AmServerTransientException: An Active Manager
operation failed with a transient error. Please retry the operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to
make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 at
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult,
SafeExInterfaceHandle iUnknown, Exception innerException) at
Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain,
String password) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid,
MountFlags flags) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()
at
Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode
opCode, Action operation) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, AmDbActionCode
actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of inner exception stack
trace (Microsoft.Mapi.MapiExceptionNetworkError) --- --- End of stack trace on
server (Exchange2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint
rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String
serverToRpc, Guid dbGuid, AmMountArg mountArg) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags
storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs ) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler
ev) --- End of inner exception stack trace
(Microsoft.Exchange.Data.Storage.AmServerTransientException) --- at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan
timeout) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags,
DatabaseMountDialOverride mountDialOverride, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of stack trace on server
(EXCHANGE2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint
rpcOperationHint, Database database, String targetServer, InternalRpcOperation
rpcOperation) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags
storeMountFlags) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()
The system attendant service does not start either. Any ideas? -
Exchange 2010 Information Store Service not Starting ERROR 1003
Error message when I try to manually start the service myself :
Windows could not start the Microsoft Exchange Information Store on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service specific error code -1003.
Please help me resolve this issue, I have been working on it for two solid days with no progress.
The Event Log Report : The Microsoft Exchange Information Store service terminated with service-specific error %%-1003.
System
Provider
[ Name]
Service Control Manager
[ Guid]
{555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName]
Service Control Manager
EventID
7024
[ Qualifiers]
49152
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8080000000000000
TimeCreated
[ SystemTime]
2013-12-10T09:43:09.741080700Z
EventRecordID
680929
Correlation
Execution
[ ProcessID]
548
[ ThreadID]
10672
Channel
System
Computer
SBS2011.******.local
Security
EventData
param1
Microsoft Exchange Information Store
param2
%%-1003
Error 0xfffffc15 starting the Microsoft Exchange Information Store.
Failed to set Default Jet params.The server seemed to have restarted on the weekend and the monday I was alerted of the problem.
Yes I did have a anti-virus program running on the server and I have removed the AV Kaspersky Endpoint 8 and the Security Centre but I cannot remove the Mail Server but I think I have turned it off.
EDIT:
Sorry and yes all the other services seem to start fine.
Originally discovered the issue when users could not open Outlook then I discovered the Database was un-mounted and the service was not starting.
only other event I can find :
The Microsoft Exchange Information Store service terminated with service-specific error %%-1003.
System
Provider
[ Name]
Service Control Manager
[ Guid]
{555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName]
Service Control Manager
EventID
7024
[ Qualifiers]
49152
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8080000000000000
TimeCreated
[ SystemTime]
2013-12-10T10:45:38.168386900Z
EventRecordID
682044
Correlation
Execution
[ ProcessID]
548
[ ThreadID]
12532
Channel
System
Computer
SBS2011.xxxxx.local
Security
EventData
param1
Microsoft Exchange Information Store
param2
%%-1003 -
Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj -
Exchange 2013 Information Store Service not starting
This is the event viewer error: Event 4027 Msexchange AdAccess.
This is the description in spanish of the event:
Proceso w3wp.exe (PID= 2788). Error en la solicitud WCF (Get Servers for xxxxx) al servicio de topología de Active Directory de Microsoft Exchange en el servidor (TopologyClientTcpEndpoint (localhost))Hello. We rebooted our Exchange 2013 Server and now Information Store Service is not starting among other main services.
When I try to start manually the service it turns an error 2414. I found out in some pages that enabling IPv6 should make it work but in my case it doesn't.
Any idea?
This topic first appeared in the Spiceworks Community -
I am looking for software to store photos with. I am not a fancy photographer, and really am just looking for the digital version of a photo album. iPhoto is not cutting it, mainly because it does not back up and restore easily on an external HD.
That's how Time Machine and iPhoto now work. Restore the library to one of the external HDs, check it for the photos you want, export them to the boot drive and delete the restored library.
If you know the file name of the photo you're looking for you can search for them in the TM backup using Find Any File.
My workflow allows me to do that:
1 - upload new photos to a folder on the Desktop.
2 - name the folder to represent the contents and date: 01/03/10-Toads Bday
3 - use a file renaming app to sequentially rename the photos in the folder to: 2010-01-03-Toads Bday-001.JPG, -002,JPG, -003.JPG, etc.
4 - import the folder into iPhoto creating an Event with the same title as the folder.
Now I can search for those file by file name with any app of my choosing. -
Microsoft Exchange Information Store Service Utilizing High Memory
Hi All,
i have 2 Mailbox role server in DAG, the DB mounter server always utilizing high memory up to 98% by store.exe services. currently i am running with 24GB Physical Memory.
when ever it goes to high memory i need to restart the store.exe services then, it will come back to normal 50% later slowly it will move to 86% like that. anyway where we can restrict or manage store.exe to utilize available memory.
i am running with exchange 2010 SP1.
sriniHi Andy,
yes, its working as per normal, but i wanted to understand why all of sudden its utilizing all RAM and there is not available memory to perform anything else. due to this its always trigger alert notification based on my monitoring.
Thanks.
srini
What is the server not able to do? What is affected?
You can limit mem usage, but generally its not generally needed or recommended.
However, if you have technical requirement to do that, you can:
https://social.technet.microsoft.com/Forums/exchange/en-US/b7b2f9d9-4370-4984-8713-dc1d52a68105/how-to-reduce-memory-utilization-of-exchange-server-2010?forum=exchangesvradminlegacy
http://www.bursky.net/index.php/2012/05/limit-exchange-2010-memory-use/
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
There is a item that came out today,and it says that it's not avalible at stores. The other problem is that I don't have a credit card to buy online items. Is possible to buy online items while in store without using a credit card?
Hello KraftPunk,
Not having a credit card can put a damper in your online shopping experience. With that said, we may be able to place an order in store for an item you desire so you can pay in cash, or you may purchase a gift card to use on BestBuy.com as Mbrguy suggested. I would encourage you to visit a store and speak with one of our Blue Shirts in regards to what options we may have for you!
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message -
Restarting the MS Exchange Information Store
Exchange 2013 SP1 with 2 member server DAG. We installed the 2nd member server product key and need to restart the information store. What is the proper way to restart the information store with a DAG?
The dag member that needs to have the information store restarted is hosting a passive copy of the DB. From what I am reading, it looks like maintenance mode only needs to be set on the server hosting the active copy?Exchange 2013 SP1 with 2 member server DAG. We installed the 2nd member server product key and need to restart the information store. What is the proper way to restart the information store with a DAG?
The dag member that needs to have the information store restarted is hosting a passive copy of the DB. From what I am reading, it looks like maintenance mode only needs to be set on the server hosting the active copy?
If the databases are all passive, simply restart the IS service. It will take a few minutes for things to look healthy again with get-maiboxdatabasecopystatus and it will be good.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
Maybe you are looking for
-
I am trying to update my 3GS to the IOS 5 i keeping getting an error message(-50) while updating and it tells me i will lose eveything on my phone please help. my phone is IOS 4.3.5.
-
Why isn't my Apple TV MC572LL/A showing the icon to purchase TV shows.
Why isn't my Apple TV MC572LL/A showing the icon to purchase TV shows?
-
HT4623 my apps will not sync on my iphone
My apps will not sync on my phone. I restored it and now there is no music or apps on my phone.
-
WRT54GS - Updated my firmware to v1.52.8 and now it's extremely slow _
Hi there, I decided to update my router firmware for the first time since I bought the thing 6 years ago. Before I updated the firmware I had an average ping to google.ca of 40ms, I am literally 2 feet from my router with an unobstructed view. Since
-
Problems with permissions to execute a web service in a drop down list ...
Hello: I have created several iView with VC and I integrated it into guided procedures process. In some of that VC iViews I have drop down list that are filled with data retrieved from web services created by us that doesnu2019t require any authentic