Half yearly vs Quarterly Reports in Answers

Hi,
I have a requirement from customer, where they want the report to be shown for quarter by default.They want to have a drop down where they select "half year" and the report need to be displayed for half year.
These two report differ only by the "filters" i.e year =<quarter> or year =<half year> .IS there any way this requirement can be achieved in a single report??? please suggest if any compound view feature can be helpful

I solved this requirement by creating a dropdown of the reports.

Similar Messages

  • Can i get month, quarterly, half yearly, yearly wise sales report basing on

    hi,
    sap gurus,
    good evening to all,
    how can i get month, quarterly, half yearly, yearly wise sales report basing on division and material.
    is there any std transaction code for that.
    customization is requried for that.
    regards,
    balaji.t
    09990019711

    Standard SAP SD Reports:=
    Statistic Group:
    Purpose u2013 To capture data for Standard Reports, we require to activate Statistic Group as under:
    --> Item category (Configuration)
    --> Sales document type (Configuration)
    --> Customer (Maintain in Master data)
    --> Material (Maintain in Master data)
    When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
    Configuration:
    IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
    1. Maintain Statistics Groups for Customers
    2. Maintain Statistics Groups for Material
    3. Maintain Statistics Groups for Sales Documents
    4. Assign Statistics Groups for Each Sales Document Type
    5. Assign Statistics Groups for each Sales Document Item Type .....
    All Standard Reports which are available are as under:
    SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
    1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
    2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
    3. Sales organization -> Sales organization / Sales office / Sales employee
    4. Shipping point -> Deliveries / Returns
    5. SD documents -> Orders / Deliveries / Billing documents ...
    & so on.
    Regards,
    Rajesh banka

  • Maint. packages daily,weekly,fortnightly,monthly,quarterly,half yearly,year

    Dear All,
    My client wants to maintain only One Maintenance Strategy for all the Equipments.In that they want to keep following Maintenance Packages.
    1) Daily
    2) Weekly
    3) Fortnightly
    4) Monthly
    5) Quarterly (Three monthly)
    6) Half Yearly
    7) Yearly
    While creating Maintenance Strategy I am using Strategy key (A - Scheduling by calendar)
    In this case what will be the Strategy unit considering above packages because each package is different.
    For maintaining Maintenance Package, double click on Packages, here which unit is to be maintained for each above mentioned Packages?
    In the same screen, column Initial & Subseqnt is it necessary to maintain. If I donu2019t maintain this what will happen?
    Kindly suggest me is it possible to maintain above 7 packages in 1 Strategy for carrying out Preventive Maintenance of Equipment.
    Thanks & Regards,
    Sandeep

    Hi,
    For all these you can use day as basic unit, and scheduling indicator as Time- factory calndr,
    1) Daily                                            1 DAY
    2) Weekly                                        7 DAy
    3) Fortnightly                                  15 DAY
    4) Monthly                                      30 DAY
    5) Quarterly (Three monthly)         90 DAY
    6) Half Yearly                               180 DAY
    7) Yearly                                      365 DAY
    It will work with this combination.
    Regards,
    N.Nagaraju

  • Calendar bug - half-year view glitch - Z10 10.2.1

    BB10 calendar app's half-year view display has a bug that seems pretty disturbing because it is so basic:
    1) Open calendar to month view (this is my default)
    2) Swipe the content pane down to reveal the half-year view
    3) Tap the current month - this dismisses the half-year view and takes you to the month view
    4) Swipe the content pane down again to reveal the half-year view, then swipe right to view the prior half-year, then swipe left to get back to the current half-year.
    The dates shown for the current month in the half-year view will be shifted.
    I noticed this bug in April 2014.  The 1st of the month fell on a Tuesday.  But after doing the above described swipe sequence, the dates shown for just April, in the half-year view, are shifted forward, so that it incorrectly shows April 1 as falling on a Wednesday.  As I'm reporting this on April 30, it's unlikely to get reviewed by someone at BlackBerry in April, and I didn't try re-setting my device date to different months to see if the bug manifests for months other than April.  So, if a BlackBerry reviewer is going over this bug report later this year and cannot get the bug to manifest, they should re-set their device date to some date in April 2014.  However, as they investigate the bug, they should probably try to get it to manifest in other months, and maybe also in a leap year.
    Note that if you do two right swipes in the half-year view, to go back to the prior year, then do two left swipes to again get back to the current year, the dates for the current month then line up correctly.
    A bug like this really makes me lose trust in my calendar (a calendar is not a new research problem in software development, so if this is broken, what else is broken?)
    Device/OS details:
    STL100-3
    Software release:  10.2.1.2156
    OS Version: 10.2.1.2228

    Confirmed that the same bad behavior is there now that the calendar has rolled forward to May.
    Like I said this raises the question of what else is broken in the basic functionality of an essential app.
    BlackBerry folks reading this - hope to you see you reproduce the bug, and acknowledge ingestion of a bug report into your internal bug tracking system, for priority fix on next OS release.
    Others reading this, if you reproduce the bug (should be easy) - please add comments as you see fit, to get BlackBerry's attention on this one.

  • How to get correct opening blance data for the quarterly report in BOFC?

    Hi all,
    I  have a problem with getting the opening balance for the quarterly report.
    i would like to keep the beggining balance data for the end of previouse year. (eg: now is 2010, then keep the begginig balance at Dec.2009 for each quarterly reporrt through the year in 2009).
    however, for example in the second quarter, if i choose the beggining balance of Dec.2009 in the Consolidation definition, there is a problem that consolidation FS does not include the manual journal entry that ive entered at the first quarter such as goodwill.
    Do I need to make manual journal entry at all the quarterly reporting period if I want to set the beggining balance for the previouse year end?
    Could somebody please tell me how to remediate to this issue?
    Or how do you manage with the opening balance in BOFC?
    Thanks & Regards,
    Hitomi

    Hi Michael,
    HRMS appliocation
    database 10.2.0.4
    windows XP
    ebs 11.5.10.2
    One of our user using disooverer 4i desktop and administration edition on old windows 2000 machine and connecting to schema.
    We are decommision old windows 2000 machine.
    I have installed disooverer 4i desktop and administration edition on new windows XP VM box and trying to connect to same schema which was used with old
    desktop and asking me to create EUL. What is theat I should be doing to use new one same as old one?
    Old box is still there.
    Thanks.

  • Parameter  value "Half year " is not accepting by while updating time dimen

    Hi,
    while i am updating "Time" dimention i am getting an error as parameter value "Halfyear" is not valid value. But system is  accepting Daily, Monthly, Quarterly and yearly under Level parameter.
    So please advise me how to proceed on this.
    Regards,
    M.Chandra Sekhar Chowdary

    Hi,
    This is definitely not the answer you might be expecting. We have it as 'DAY' for the level property values for H1 and H2(completely not reasonable). But you can process the TIME dimension with this 'value' for half year provided you dont have dates as your time members (which may be the case).
    Try using 'DAY' and process the dimension as a work around. We could wait if there is any other valid reason behind this (not taking 'halfyear').
    Thanks

  • T Code for Generating Service Tax Half Yearly Return i.e. ST3 in 4.6 Versio

    Hi,
    Can anybody tell what is the T Code for Generating Service Tax Half Yearly Return i.e. ST3 in 4.6 Version.
    Regards
    Srinivas

    Hi Srinivas,
    I think their is no direct transaction for that, and think creation of a Pricing report using TCode  V/LA and specifying your conditions in that, and then executing it using the TCode V/LD wil do.
    Hope this Info will be helpful.
    Regards with points if Helpful.
    Regards
    Karan

  • T Code for Service Tax Half Yearly Return i.e. ST3 in 4.6 Version

    Hi,
    Can anybody tell what is the T Code for Generating Service Tax Half Yearly Return i.e. ST3 in 4.6 Version.
    Regards
    Srinivas

    Hi Srinivas,
    I think their is no direct transaction for that, and think creation of a Pricing report using TCode  V/LA and specifying your conditions in that, and then executing it using the TCode V/LD wil do.
    Hope this Info will be helpful.
    Regards with points if Helpful.
    Regards
    Karan

  • My macbook is two and half year old, going to sleep mode randomly

    Having used this Macbook for almost two and half years, my machine has suddenly generated the problem of going to random sleep. It started as an infrequent thing, then it started happening on a regular basis, to the point that it became almost impossible to work with it. When the computer goes to sleep mode, it doesn't wake up with any key, it has to be woken up by pressing the power button lightly.
    Here are the steps I took:
    1. The normal thing I did was search Apple Forum and then reset SMC, PRam, then changed energy saving options, everything. Nothing worked.
    2. Ran the hardware test and no problems found.
    3. Ran the Macbook with all options: with just the battery, without the Magsafe connected, with Battery and Magsafe connected together, with battery removed and the computer running on Magsafe only. Random Sleep continues
    4. Thought must be a connection issue and ran to Apple Store in Kolkata, India, thinking that it could be a connection issue with the sleep-mode cable. Apple Store kept the Macbook for seven days, saying that they needed to check the machine, returned it on the seventh day saying that the machine was fine and charged me Indian Rupee 1,500/- (about $ 34). I came back home and the problem persists.
    (Here I would like to add that Apple Service in Kolkata *****, probably ***** all over India, simply because Apple is not a major player in this country. The service engineer at Apple Store was at a loss with my problem and after seven days could only say, "We have done our internal tests and found no problem with your Macbook." When I asked about the Sleep Mode sensor connection, he said, "That is working fine, we have checked that.")
    5. After coming back home, I faced the same problem, this time with lesser time gap. It would go off to sleep every one minute or so. I decided to set my computer on "never to sleep mode" in the enery saving option. Alas, that didn't help either.
    6. I redid the hardware check, only to find that my computer hasn't detected any hardware problem.
    7. Now, as a previous Windows user, I thought that the problem must have been with the OS. So, at the risk of losing all my files, I decided to reload the OS. (My original OS DVD was Leopard, but it was later upgraded to Snow Leopard by the vendor free of cost). I took backup in Time Machine, and backed up the documents in another Disk and reloaded the OS. All seemed fine so far, for about 10 minutes. I was now confident that finally I could solve the problem and was then planning to migrate my previous files to my newly loaded OS-X. Alas, I was wrong. Before I could connect the external HDD to my computer, my Macbook went back to its previous trick of falling asleep.
    I'll definitely take back my Macbook to Apple Care tomorrow, but with my experience here in Kolkata, don't know whether they would be able to solve anything. Last time I had to show them the posts in Apple Forum to prove that Random Sleep is a problem that happens to Macbook.
    PS: My Macbook is with aluminium body bought in January 2009. Out of warranty. My optical drive conked off long ago (after about 15 months or so after I bought the Macbook) and I live with an external drive.  

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Multi-year monthly CO report for Actual/Budget/Variance

    I have a requirement of creating a 5-year cost centre report for the following:
    Actual by month (5 years x 12)
    Budget by month (5 years x 12)
    % of the monthly amounts compared to the total (5 years x 12)
    Variance (5 years x 12)
    The request is at the cost element level, by month and for 5 years.  I am trying to decide which reporting tool is appropriate for this request.  If I use the conventional CO report format (report painter) of one column per month for actual/budget/actual %/variance, there will be a lots of columns for 5 years!
    I am familiar with reporting tools of report painter, drill-down and SAP query, although I am not sure if drill-down can be used for CCA.  Would appreciate any suggestion for: 
    1) Reporting tools for multi-year output; and
    2) Report format u2013 example of existing SAP-delivered report

    Do you intend to use a report with 240 columns? I am wondering what would be the purpose of such a large column report.
    Still if needed, you could try with painter itself, may be using page break perhaps. I am not sure of the limitation to the number of column.

  • I have a Macbook Pro 15" that is three and a half years old.  Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?

    I have a Macbook Pro 15" that is three and a half years old.  Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?
    I have a 250 gig drive and try to keep at least 100 gigs unused at all times, 4 GB 667 MHz DDR2 SDRAM memory, back up with Time Machine and CrashPlan, and have OS X 10.7.3.
    This was my first Mac since an old Apple II GS.  After that I used PC's and got really good at reformatting, replacing drives, reinstalling, defragging, resolving software conflicts, etc.  Since switching back to Macs (five in my extended family now), I haven't had to do any of those things. So, although, the cost is three times as much, the aggrevation has been ten times less.
    I'm retired and living on a fixed income and would therefore like to keep this computer running as opposed to constatntly upgrading.
    That said, any tips?
    Thanks
    It does have a crack on the left of the screen case about 3/4'' up from the bottom.  I've posted that as another question.

    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior.  Versions 1.5.1 and later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Adding more RAM, if feasible, and a new, faster hard drive may also help pep it up a little.

  • Multiple ZR2740w failures within one and half year

    Hello,
    i would like to ask you if it is "normal" for me to have this series of issues with my ZR2740w's (by normal i mean if this is typical problem for this model; i know it is not normal to have that many RMA) :
    1) first ZR2740w (let's call it A, bought in December 2011) died completely one month after purchase, panel got replaced via the onsite warranty by a new panel (let's call it B; RMA at end of January 2012).
    2) i bought a second ZR2740w (let's call it C) a half year later.
    3) C died one month ago after a year (end of April 2013), got replaced by probably a new or refurbished panel (call this one D) :
    http://www.youtube.com/watch?v=-NnHiEn42cM
    4) D died today, same (or very similar) issue as C; i expect a replacement panel around Friday or next Monday :
    http://www.youtube.com/watch?v=bU1wf7QsvWQ
    I wonder if it is something at my side, but i can't imagine what, everything else works fine. Socket voltage is withing tolerance (voltage here in Slovakia should be 230V, my socket has 236V which is within the +/-5% tolerance), the issue happens using any of connections (DVI/DP), from any source (tried 2 different computers with 3 different graphic cards - 2x Intel in various computers, 1xNVIDIA), using different power cables. C died when used on Eaton UPS, D died when connected directly to the socket.
    While i still have year and half left from the warranty of the older display and nearly 2 years of the newer one, i dislike this happening all the time, as it means i am usually one week without one of my displays, plus i can expect both displays dying within one year after the warranty expires, which is unacceptable for ~600€ display (that is around a half of my monthly salary).
    PS: And i don't even mentoin the "running pixels" issue of B on certain backgrounds (gray, blue and similar darker colors) - the pixels are moving from top to bottom, from half to about 3/4 of the display width; this one can be seen mostly when i am closer than 40cm from the display, further away it is nearly invisible (it's hard to catch it on camera, i hope you can see it at the first half of the video) :
    http://www.youtube.com/watch?v=zhiPDpSsa3g
    PS2: And i am not sure i will be even able to ask for refund once the replacement for D dies again, as it would be the 3rd failure within warranty, but technically the whole panel gets replaced, so not sure if that law applies in this case... Plus it was replaced by an authorized HP service, not by the seller.

    Just got a call from service centre, they will replace this display again, and if i get a 3rd failure within the warranty period they will refund me through the seller i bought the display from. Still can't understand why it happens, the only common thing between the failures of C and D is the power socket i get the power from (no issues with other devices connected to the same power line - LCD TV, AVR, two PC's, another ZR2740w, 23xi, Mac Mini), which i cannot change and not even the other ZR2740w has problems with.

  • Why Apple don't fix half year serious problem with HD3000, Lion and Adobe products? Doesn't Apple really care about advanced users?

    Why Apple don't fix half year serious problem with HD3000 drivers, Lion and Adobe products? Doesn't Apple really care about advanced users?
    I have Mac mini and Macbook Pro 13". Bouth with HD3000. And I can't work at all. With Snow Lepard I had no problems. It's tiny problem in code. And such pain for lots of users!

    If you have a problem with Adobe products, voice your issues with them.
    It is the software developers responsibility to maintain compatability
    with any operating system, beit OSX or Windows.

  • How can i get my messages from my old 3g to my 4s? The iphone 4s is already in use for a half year and i didn't start it from a backup

    I got a big Problem. i lost my iphone 3g a half year ago and bought myself a iphone 4s. Now my 3g found its way back to me and i need to get the messages from the 3g to my 4s.
    I didnt start the 4s with the backup. i made a new iphone so i dont have the messages from the 3g.
    is there a possibility to import the messages from the 3g to the 4s?
    Thanks for help!

    You can try this: Edit your 4S backup by adding the messages from your 3G backup. You'll need third-party software, like this:
    http://www.iphonebackupextractor.com/
    Caution: Copy your existing backup to your desktop first. One mistake & you'll make the entire backup unusable. Obviously, this is not supported by Apple, thus if you attempt to do so, you do so at your own risk.

  • Unable to Control Half-yearly & yearly Budget in Payment Budget

    Hi Expert,
    Our Client's requirement is to control the FM Budget on half-yearly as well as yearly in payment Budget category.
    Here they want that system will enable to make PR & PO for entire year but at the time of MIGO or ML81N if half-year budget get exhausted it will stop.
    Example: They will create PR for SAP Service AMC for full year as 100000*12 month = 12,00,000. But at the time of MIGO or SES system will stop to make any SES if budget will exceed for half-year(100000*6month = 6,00,000).
    Which is might be impossible because once budget get consumed at PR level it will not asked for budget again @ MIGO or SES.
    I can do the same if activate the commitment budget but they want only payment budget not commitment budget.
    Kind Regards
    Shyam

    Hi Eli,
    I agreed with you and it's 100% correct but for the same I raise the OSS and I got the below reply:
    But I have one doubt as below which I got the reply from SAP against OSS 457351/2014.
    SAP has provided below three option for this issue.
    1. Use Budget releases
    2. Use different budget type, or even different AVC Ledger
    3. Use Budget period as FM Dimension.
    I use option 1 & 3 issue is not resolved but if I use the option 2(use Commitment Budget), then issue will get resolved which is not correct because our requirement is to control the budget by Payment Budget only not from any other Budget category.
    Please suggest.
    Regards
    Shyam Singh

Maybe you are looking for