Handling unit preventing deletion of inbound delivery

Hello,
Our Decentralized WMS had a glitch in the system that left several
idocs queued to create inbound deliveries. These deliveries have
associated handling units which were placed from the outbound delivery
to the inbound.  Before the inbound deliveries could be created via XI,
users created manual inbound deliveries against the POs and PGRed.
When the Decent WMS glitch was addressed, the IDOCs submitted were
processed, creating inbounds with handling units that were completely
packed.
So our system contains 2 inbounds for a po.  We would like to delete the one with with the handling unit, but it's not that simple.
To address this issue, it is necessary to remove the handling units,
but this isn't possible.  We receive an error message, unable to change.
I've attempted to PGR the delivery but this isn't possble either.
the following error message is received.
MSSA-SATRA exceeded by 2 EA : 10004063 AA26 0001 E
How can these Handling units be deleted to allow the associated inbound
deliveries to be deleted as well?
Is there a program to modify the status of the handling unit?  I do not
want to perform any table editing or goods movements unless there are
no other alternatives

applying note 1083602 which should resolve

Similar Messages

  • How can I delete an Inbound Delivery with HUs and Confirmed TOs?

    Hello Guys,
    My client  has an Inbound delivery created from a PO line item. The goods receipt could be reversed through Vl09N so a 102 material document has been created. The problem now is that he wants to delete the ID (Vl32N) and it still has OTs confirmed with HUs created. Do you think it could be possible to delete this Inbound Delivery? Which would be the correct steps???
    Please ADVICE!

    Hi,
    Not possible to delete the IBD if it has material GR done and confirmed TO.
    \\ Shankar

  • Is there any program i can use to batch delete the inbound delivery ?

    Hello, everyone.
        Is there any program i can use to batch delete the inbound delivery ? Thanks.
    Xinzhou gao.

    Hi,
       VL66 is used for deleting temporary inbound deliveries that have been marked with the deletion flag in the database, the temporary deliveries should have the deletion flag selected in the database, but i want to delete the normal inbound delivery without deletion flag now, is there any  other solutions? Thanks.
    Xinzhou gao.

  • Unable to Delete the Inbound Delivery

    Hi Experts,
    We have made GR(101) against Inbound Delivery on 01/02/2008.
    On 24/02/2008, same GR(102) was reversed.
    When i tried to delete the inbound delivery, it is showing error as" Inbound Delivery cannot be deleted".
    Please help.

    Hello Shravan
    Have u checked the document flow for delivery/ Is there any thing pending for the delivery? Is it WM based plant? Please reverse any document created and then delete the delivery.
    2nd thing you need to check is when u made GR 101, where this stock goes? Unrestricted or Quality? You need to transfer the stock to 'Returns' with MB1B or MIGO with movement type 457 or 458 (plz chk) and then try reversing documents.
    Reward it if found useful
    Regards
    Amol

  • Handling Unit: unable to pack the delivery

    Dear Experts,
    In a HU managed storage location, there is sales order stock for material A.
    I want to post the sales order stock from sales order 1 item 10 to sales order 2 item 10, using movement type 413 E.
    Then I got an outbound delivery (delivery type HTP, item category HSTP). I think I am supposed to pack this material before I could PGI. 
    But in the delivery (edit->pack) packing screen, I found I could NOT select/highlight the material A under field 'Material to be pack' at 'Pack material' tab. So I could not pack this material into the handling unit to finish to packing step.
    Please kindly help ! Thank you !
    Jack

    Hi,
    Please try using LQ02 for your posting, if its not posting directly then you can opt to move from Sales order stock to normal stock and then again moving it to the other sales order stock. I know for sure that using LQ02 you can post from sales order to normal stock but since I don't have my current system setup to test this so I cant confirm if It can be used to do transfer directly as well.
    Regards
    Chandra Shekhar

  • Weight from Handling Unit not copied into outbound delivery weight field.

    Hi,
    We create handling units with hupast and with a weight interface. If we select the HU in the outbound delivery, we need the total weight of all HU displayed in the outbound delivery. This is not happening. The total weight which is shown is the weight of the material master.
    How can we put HU weight in the outbound delivery?
    Thank you,
    Eric van Zundert.

    hi Eric,
    you habe to do this with a user exit.
    In the deliveries, there is only one good userexit at the time save dcoument prepare. -- there is a oss - note for it.
    I copy at every save the sum of the HU-weights in the fields of likp.
    Additionally at time of goods out - boocking, i collect the LIKP-weight upon all positions of the lips, so that the sum of lips-weights will give the likp-weight.
    You need to do this, because in invoice, the weight is taken as sum of the positions and the following processes of export will also take the weight of the invoice-position.
    hans

  • One handling unit wrongly updated to the delivery out put

    Hi gurus,
             Internal handling unit number is showing delivery document number in table *vekp* but real handling unit contains no delivery document number and shipping point. Could any one guide me how to find out the delivery document of this handling unit.
    advance appreciations to all

    use t code   HUMO , give the hU nad execute , display u will get the delivery doc numbet rt side end top
    rew

  • Can we print handling unit label before assigning to delivery

    I created handling unit and assigned the output type in the handling unit, I tried to create label through VL74 but not succeded. Kindly let us know whether we can print the label without assigning to delivery document.Kindly let me know if any other options are there.
    THanks

    Hi Prakash,
    Thanks for your reply. I am bit confused with your statement. I create handling unit number and assigned output type in HU02, now i am trying to print labels from VL74 tcode, but failed. No results in VL74 output.
    It seems VL74 can be used for HU prints only after assigning to Delivery number.
    Regards,
    Lakshmikanth

  • Changing Handling unit weight does not update delivery header weight

    Dears,
    when we pack an item on a palett, system calculates tara-weight + material weight = gross weight and inserts this value to the likp-btgew. this is correct.
    now it happens, that shipping departement uses a scale to get the 'real' weight of the handling unit. if the weigth differs, they change the loading weight of the HU. system calculates correct the new gross weight of the HU.
    But when going back to delivery view, the likp-btgew is not updated. Do we miss a setting?
    thanks a lot for your help!
    Michael

    wrong forum

  • Delete an Inbound delivery

    Hi all,
    Could you please let me know any ABAP Function module for deleting an ID created in SAP R/3.
    Regards
    Murthy

    Hi,
    Check
    delete serial numbers from inbound delivery
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/56a89d90-0201-0010-97a7-c5e8dbbb22e2

  • Deleting Open Inbound Delivery

    Hi All,
    I want to delete the Open Inbound Delivery.
    Is there a way to close this inbound delivery.
    Issue is  : Gr already done but not with VL32N but with MIGO so it remains open in system
    Regard
    Amey

    From an MRP standpoint, the inbound delvy is marked as 'closed' (provided the confirmation control configuration setting has this marked - this comes has default).
    Operationally, the inbound delivery is closed therefore has no implication. It is just the part of the 'status' and document flow of the inbound delvy that is not updated and as you may know already that this status/document flow is updated via VL32N receipt or 'shipping parameter at client level' configuration under shipping.
    If you just want to delete the IBD regardless then you have to reverse the receipt and make the deletion. But, I'm not sure why would you need to delete the IBD since you can now receipt via VL32N.

  • Attaching Handling Unit ID to Inbound delivery (Vl32N)

    Hello All ,
    I am trying to attach External handling unit ID to the Inbound delivery (Vl32N) .Iam using WS_DELIVERY_UPDATE ,but somehow its not working .can u help whether there are any other functions that will do this ??
    Thanks .

    Hi,
    Try with PROCESS_HU_INBOUND_DLVRY, WS_DELIVERY_UPDATE, SD_DELIVERY_UPDATE_PACKING
    Thanks,
    Abhijit

  • Inspection lot not getting cancelled after the inbound delivery is created

    Hello,
    The scenraio is like this.
    1. Material was procured in plant A.
    2. Using the stock transfer purchase order, transferred the material from Plant A to Plant B.
    3. Outbound delivery was created, Handling units were assigned and Post Goods issue was done.
    4. As soon as this was done, inbound delivery got created automatically in plant B and Handling units were assigned.
    5. Inspection lot was created with origin "08".
    6. Now I want to reverse all the transactions, so I did as mentioned below.
    7. Handling units were deassigned from the inbound delivery and inbound delivery was successfully deleted.
    8. Now tried to do the reverse post goods issue and got the error "Handling unit XXXXXX cannot be reversed"..Goods movement cannot be reversed for handling unit XXXXX because it has been changed or assigned to object since the last goods movement posting".
    The issue is that as soon as the inbound delivery is deleted, the inspection lot status should change, which has not changed. So kindly let me know how to make the system cancel the inspection lot as soon as the deassignment of handling units is done in inbound delivery or the inbound delievry is deleted.
    Regards,
    Narendra Bora

    Hello,
    Can anyone please reply.
    Regards,
    Narendra Bora

  • Handling Units are released once a PGI or PGR is done?

    Hello Gurus,
    would you please let me know if I have handling units assigned to an inbound delivery oroutbound delivery, once I post the goods receipt or the goods issue, this handling unit numbers should be released from this documents, I mean, this HUs numbers should be un-assigned to this documents?
    Is there a process after the PGR or PGI that should un-assign this Handling Units from the SAP documents?
    Thanks
    J.Alvarado

    Thanks very much for this additional information.
    I checked my handling units and all are in status 12. But there are handling units in the system from 2008.
    I ran the program RHU_AR_ARCHIVABILITY_CHECK and the result was that for all this HU from 2008, the reason they cannot be archived is the next:
    Reason 01 : Movement status of the HU does not allow for archiving.
    Reason 04: Delivery document not archived.
    Do you have any clue of what should I check regarding reason 01?
    Thanks
    J.Alvarado

  • Delete Inbound delivery

    HI ALL,
    I am use warehouse management & Handling unit. I want to delete the inbound delivery that the picking status is complete.
    How to do that ? could anyone tell me please ?
    Thanks & Best Regards,
    Saiful arif

    Hi Saiful,
    To delete the inbound delivery, you must firstly move the SU back to its original place. Once this is done, you can then un-assign the HU from the delivery and then you should be able to delete the delivery.
    Please try again with LT09.
    Kind Regards,
    Patrick

Maybe you are looking for

  • How to change multiple artboardsizes AND objects in it?

    Hi everyone I want to know if there's a possible to change multiple artboards AND the objects that you make in it, scale proportionally? I'm able to change my artboards independent but not al the artboards on the same time. Is there an option for tha

  • Regd Integration of Domino.doc with Oracle 9i AS Portal

    I want to know whether the integration of domino.doc with oracle 9i as portal is possible or not. Can anyone guide me whether the integration is possible or not and if it is possible which document should i refer for the same. and i dont know much ab

  • Binding Issue

    Hi all, I created this Context: - ParentNode (1..1) --- ChildNode (1..N) ValueAttr (type String) In the init fase a fill the ChildNode with 10 elements. (VallueAttr[0] etc..) What i want to do is to bind all these 10 ValueAttr elements to 10 UI eleme

  • Creating Database Link ..

    I have created a Database Link in Oracle 10g for Oracle 9i. Link is created is successfully but when i test it it gives me error ORA-12154 TNS COULD NOT RESOLVE THE CONNECT IDENTIFIER SPECIFIED I have tested the connect string, thats working pretty f

  • BEX on Web

    Folks, Presently we are only using BEX Analyzer as a reporting tool (NW 2007s), users are encountering problems when the reports exceeds more than million rows for MS 2007 and we don't have portal in our company but Is there a way to publish BEX Quer