Handling units of Outbound deliveries

hi all.,
while creating outbound delivery , i will make the packing,so at the time the system gives all information expect<b> the Metrial</b>
What Can i do for this error?
pls help me
Regrads
Lakshmanan.S
E-Mail : [email protected]

You may need to create packing instructions so that the correct packaging material is assigned within the delivery
Within packing instructions you need to create an instruction and then assign it
Logistics > Central Functions > Handling Unit Management > Master Data > Packaging Instructions > Create
Logistics > Central Functions > Handling Unit Management > Master Data > Packaging Instructions determinsation > Create

Similar Messages

  • How to unassign handling unit in outbound delivery?

    (Don't Want to delete HU onlu unassign it from delivery: WM requirement)
    I would like to unassign HU in an outbound delivery.
    code i'm using make the handling unit disappear in the overview of HU.
    but corresponding line in the "item overview" are still existing.
    And when I want to copy pack quantities as delivery quantities, system tell me that "50.000 M have already been packed. Quantity cannot be changed. "
    How can I do, to do as if i pushed button "delete assignment" in HU overview?
    Here the code I'm using:
    CALL FUNCTION 'HU_PACKING_REFRESH'.
    CALL FUNCTION 'HU_GET_HUS'
    EXPORTING
    if_lock_hus = 'X'
    it_venum = I_VENUM "it_venum contains l_venum
    IMPORTING
    ET_ITEM_SERIALNO = o_item_serialno .
    CALL FUNCTION 'V51P_DELETE_RELATIONSHIP'
    EXPORTING
    IF_CONTROL = 'X'
    IT_HUS = i_venum
    IMPORTING
    ET_NEW_HUS = LT_HUS
    et_messages = lt_messages
    EXCEPTIONS
    FATAL_ERROR = 01 .
    CALL FUNCTION 'HU_POST' .
    call function 'BAPI_TRANSACTION_COMMIT'.
    Please let me know the function module if anybody has idea to unassign from delivery.
    Edited by: Akshay Kale on May 4, 2010 7:04 AM

    Hi Akshay,
    This question is marked as Answered , can you please let me know how you have resolved this error .
    My Requirement is to remove HU assignment from inbound Delivery . If possible can u provide me the code snapshot to remove assignment for inbound delivery.

  • Packing handling units to outbound delivery with batch management

    Hello all,
    I am packing an outbound delivery with a material that has batch management active. The packing is from a storage location that manages handling units (HU-managed sloc).
    My problem is u2013 before entering the HUs to the delivery u2013 the system asks me to enter the batches (in the batch split function). Only then I am allowed to enter the HUs in the packing function.
    What could be the reason for this preliminary batch entries ?
    How can I set the system not to do that, i.e., I would like to be able to enter the HUs directly without entering the batchs separately.
    Thanks,
    Isaac

    Dear Isaac,
    this system behaviour can not be changed in standard and is also not recommended to change it via a modification. The reason for this system behaviour is to avoid inconsistencies in the system. The HU that you assign to the delivery, should exactly fit to the delivery. In case if the material is batch managed, you should specify the batch first, and then add the fitting HU with exactly that batch.
    I suppose you checked the longtext for HUDIALOG102, that you get in the described case, but I copy it for you, in case if you did not read it:
    "Diagnosis
    There are items to be handled in batches which have not yet been
    assigned to a batch.
    Batches must be recognized for items with HU-managed storage location
    For items at a storage location that is not HU-managed, the item type
    determines if packing will take place at cumulated item quantity level
    (meaning that the batch is not recognized at any point in the handling
    unit) or if packing must take place at batch level.
    System Response
    If an item requires batch identification, that item will not be
    suggested for packing as long as the batch is not recognized.
    Procedure
    Go to the maintenance of the delivery item and assign at least one batch
    to the item."
    Regards,
    Ely

  • Pack existing Handling Units into outbound delivery

    Hi,
    The current scenario is that a WHSCON IDoc is passed into SAP which will pack handling units onto an inbound delivery. As part of this processing the IDoc will create the HU records on VEKP.
    Now, we are sending in a similar WHSCON IDoc to pack the same HU onto an outbound delivery. However, the IDoc is failing. It appears that the IDoc wants to create the HU instead of simply using the existing one.
    Has anybody faced a similar issue.
    Thanks
    Martin

    Hallo!
    Yes, I have the same problem now.
    In the past we had 2 wm sub systems which send data via WHSCON to SAP and pack the delivery items.
    To avoid error messages we "kill" the old vekp-record by setting the vekp-status to "0099" with a hart update and create new hu records.
    Nowadays this solution is not sufficient,  because the old hu has serial numbers.
    Any solution in sight?
    bye
    bernhard

  • Processing handling units for outbound delivery

    Dear All,
    I am getting the message "The material contained in the item you chose is maintained in the material master with the material group packaging material K. The handling unit you chose has a packaging material of the packaging material type V
    There is no entry for the material-group packaging-material for this material type in Customizing.
    Can you please advice what should be done to fix this where to make the customizing.
    Warm Regards

    Hi,
    Change the material group in the mateiral master. OR in SPRO configure for Define material group for packaging material and Define Allowed Packaging Materials for the material group that you have defined in the material master.
    Thanks and Regards,
    Maheshwari

  • Handling Units in Inbound deliveries

    Dear All,
    Could you please let me know what is the complete SAP process for HUM in Goods reciept with and without WM. We are recieving the  Boxes containing various combinations of configurable material from the Supplier and the same are being delivered to the Customer sites. Kindly let us know the Standard SAP solution to tackle this.
    Thanks a ton,
    Regards,
    KS

    Hello KS,
    The inbound process with Handling unit is as follow:
    - Purchase order is created with Shipping Notification
    - The vendor notifies the goods recipient of the delivery of the goods by using a shipping notification that also contains the packaging data.
    - The shipping notification generates an inbound delivery that includes the packing information from the shipping notification. (Incase NO EDI notification, the inbound delivery must be created and packed manually for the purchase order.)
    - The handling units are put away and the inbound delivery is posted for goods receipt.
    Hope this helps.
    Regards

  • Manual Gross Weight from Handling Unit to Outbound Delviery

    Hi Friends,
    I have a question related to gross weight replication from HU to outbound delivery document.  During delivery process, for packing, system calculates the gross weight on the basis of weight from the material master however the weight is not accuare and for that we modify the value with the actual gross weight of the physical packing.  Now when return to the outbound delivery screen, system is not replicating the updated weight entered in HU and showing as blank value.
    Please help, is this standard behaviour or how to correct the problem...we are using ECC5.0
    Appreciate your support.
    Best Regards,
    Goutham

    Hi Gaoutham,
    This issue is related to suspicious development in user exit. I faced the same issue in an earlier project, where the HU weight is not changed manually when u go back to delivery screen. Finally developer had found the some Z table where it was mentioned like if sales organsation so and so... then it should not allow to change the weight manually and the remark was maintained as "X" in front of particular field.
    Please try this and confirm.
    Thanks & Regards,
    Rahul Verulkar

  • List of Inbound Deliveries with handling units

    I am looking for standard report where i can get the list of inbound deliveries with handling units linked to them.
    I saw VL06I but could not get the details.
    Regards
    Sameer

    I think only HUMO (tab: "Assignment to objects") is the transaction in which you can get a list with IBD no. and HU no. However, the selection screen is not be the best...
    In VL06I you also have the handling units ("List Inbound Deliveries" button) both on selection screen and in the report.
    Please carefully read OSS notes 368917 and 122282 about this.

  • How to delete the item from Delivery?? (Handling Unit)

    Dear SDNs,
    I have a scenario of HU (Handling Unit).
    Now here I have a case where the complete cycle is done. But end user now wants to change/delet the item in Delivery. So I have guided them to reverse all documents and it is done.
    Now delivery is in Editable Mode. Now here when I try to Delete Delivery Line Item.. It is giving Error like "Item has already been packed and therefore cannot be deleted"
    Diagnosis says "It is not possible to delete packed items."
    Procedure says "Unpack the item from the shipping unit before you delete it."
    Now when I select Line Item and click the PACK Button to go to the screen for "Processing of Handling Units for outbound Delivery XXXXXXX", it goes to the screen but here there is not Existing HUs available to Delete/Empty... whole screen is Blank.. even no Material to be packed...
    I think user have proceeded the cycle without HU assignment.
    So now I want to Delete the Line Items and want to insert fresh Items again...
    Any inputs???
    Thanks & Regards,
    HP

    Hardik Patel,
    I have checked your equirement frankly speaking i was not exposed to such an scenario. I got alink which will help you
    Handling Unit and Packing used across all modules.
    [http://help.sap.com/saphelp_47x200/helpdata/en/c8/a44b749f3211d2858d0000e81ddea0/frameset.htm]
    Here to your left choose Packing --> Working with Handling units --> Unpacking
    Therein you will have Unpacking, Deleting  HAndling units
    Just Check....
    Regards
    Sathya

  • Handling Unit with packaging Material

    Hi All
    Can someody plz tell me WM process. Plz go through my scenario:
    I want to transfer the material from one site to another site through STO.
    I create an STO(ME21N) -> Delivery (VL10D) -> Handling Unit(HU02) -> Outbound Delivery of HU(VLMOVE) -> PGI(VL02N) -> Inbound Delivery at recieving Site(VLMOVE) -> PGR(VL32N)
    I am having a problem. While doing the Inbound delivery through VLMOVE i enter the receiving site and sloc. But in PGR (VL32N), again i need to enter site and sloc for packing material. But for material the site and sloc in automatically detected.
    Plz give me any idea, how packing material behaves in this process. How packing material can detect the site and sloc automatically from inbound delivery.
    Delivery Type for outbound delivery - HOD
    Delivery Type for inbound delivery - HID
    Item Category for outbound delivery for material - HODN
    Item Category for outbound delivery for packing material - ZLNO(copy of HODN)
    Item Category for inbound delivery for material - HIDN
    Item Category for inbound delivery for packing material - ZLNI(copy of HIDN)
    Plz send any documentation if somebody can for WM process at (nanda.kpl at the rate gmail) - material transfer from one site to another site through STO and HU management?
    Full points will be awarded.
    Thanks & Regards
    Kapil Nanda

    Thanx

  • Handling Unit - Storage Location

    Hi,
      Finished product is lying against sales order in a particualr
    storage location eg: 1000  . Is it possible to create handling
    unit through Outbound delivery in the same storage location .
    If it is possible is it the right method to do.
    Awaiting for reply
    Regds
    Tresea

    Well if you want to Pack HUs for Outbound Delivery in a HU managed Storage Location (SLOC 1000 for ex) then make sure that the SLOC is not Warehouse Managed with Storage Unit Management activated.
    Just performing HU operations at SLOC level is fine. But once you activate WM with SU Mgmt you need to create Partner Storage Location (virtual) to perform Pack-Unpack operations.
    Reason being - you cannot perform Pack operations on a SU but on a HU only.
    Read some more on the usage difference between SU-HU to help understand this.
    Let me know if u need some specific info.
    thanks.

  • Copy Handling Units

    Hello,
    In the Stock transfer scenario, we are facing the issue related to handling units replication. 
    During the process, handling units are assigned to outbound delivery generated against stock transport order.  From the Confirmation message, system automatically generates the inbound delivery as soon as post goods issue document is posted from the outbound delivery document.  However handling units in outbound delivery document are not copied into inbound delivery document and someone needs to enter manually again in inbound delivery document which is not acceptable to the business.
    In this regard, request your support how to replicate the handling units from outbound delivery to inbound delivery document.  Is this standard BUG in SAP ECC, we are using ECC 5.0
    Appreciate your reply.  Thanks
    Best Regards,
    Goutham

    Hi,
    Please check the below link. Ihope this will help you.
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-sd/outbound-delivery-handling-unit-number-827171

  • Pack two or more Outbound Deliveries into the one Handling Unit

    Hi Gurus,
    I'd like to, sometimes, pack two or more Outbound Deliveries into the one Handling Unit, can anyone please advise how this can be achieved.
      Thanks in advance

    Hi Simon,
    there's no way you can do that, the HU is owned by the delivery, so the relationship is one to one.
    In order to be able to pack items coming from multiple deliveries into the same HU/HUs you'll have to use Shipments: basically a shipment is made of deliveries and HUs are owned by the shipment, that way you would be able to achieve your result.
    Pls. reward if useful.
    Best regards,
    Enrico

  • Weight from Handling Unit not copied into outbound delivery weight field.

    Hi,
    We create handling units with hupast and with a weight interface. If we select the HU in the outbound delivery, we need the total weight of all HU displayed in the outbound delivery. This is not happening. The total weight which is shown is the weight of the material master.
    How can we put HU weight in the outbound delivery?
    Thank you,
    Eric van Zundert.

    hi Eric,
    you habe to do this with a user exit.
    In the deliveries, there is only one good userexit at the time save dcoument prepare. -- there is a oss - note for it.
    I copy at every save the sum of the HU-weights in the fields of likp.
    Additionally at time of goods out - boocking, i collect the LIKP-weight upon all positions of the lips, so that the sum of lips-weights will give the likp-weight.
    You need to do this, because in invoice, the weight is taken as sum of the positions and the following processes of export will also take the weight of the invoice-position.
    hans

  • Auto PGI for only deliveries which contain a Handling Unit

    It is possibe to setup automatic post goods issue when confirming the transfer order using :-
    IMG menu path:  Logistics - Execution - Warehouse Management - Interfaces - Shipping - Define Shipping Control - Define Shipping Control at the Movement Type Level
    Mvt type 601 - setting Copy WM Quantity to option '4' -i.e.  auto PGI
    However this would then work when confirming  transfer orders for ALL outbound deliveries.
    I only require auto PGI to work for deliveries containing Handling Units.
    Is this possible ?  I imagined it might involve cloning mvt type 601 to another mvt type which would then be used
    specifically for handling units.
    Regards.
    Phil.

    Thanks for the reply, using VL06G in background is an option.
    Is another possible option to use a Special Movement Indicator ?
    WM mvt typ 601 could be copied to a new one e.g. 610.  The interfaces table could then be setup so that Ref mvt type 601
    with a Special Movement Indicator points to WM mvt type 610.
    The issue I have is that I don't want to set the Special Movement Indicator on the Material Master (WM 1 view).
    I know it is possible to define the Special Movement Indicator within MIGO as a default setting.
    Is there something similar within the Outbound delivery ?
    Regards.
    Phil.

Maybe you are looking for