Hardware Configurations for Oracle 10g AS

Hi,
I'm looking for Hardware Configurations on various platforms which Oracle AS 10g supports. Basically i'm looking for details for these on each supported platforms.
No. Of CPUs
CPU Speed
RAM
Disk Space
I would appreciate if someone point me some document on this.
Thanks,
RK

Those parameters are more of a function of intended use (ie the application and which components of AS involved). There are absolute minimum values to enable installation (not use) of the software in each platforms Install Guide.
For certified platforms, check with you sales contact or Oracle Support.

Similar Messages

Hardware specification for Oracle 10g

Hello all,
I need a hardware specification for Oracle 10g. Where can I find any information about this topic?
Thanks
Wisnia

Minimal HW requirements are described in documentation.
As you question is very general (you didn't provide some parameters) then maybe this site will help you: http://www.sizinglounge.com/

Best Hardware Configuration for oracle RAC

Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
Edited by: aram on Sep 23, 2011 8:08 AM

aram wrote:
Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
HI,
For your home testing you might need a latest technology to get a smooth and fast installation. i7 processor might be the ideal with memory at least 8GB. if you're planning to have more than 3 VMs running at the same time than you need 12-16GB memory at least.
From my experience installing on vm and allocated memory 2.5GB each VM the installation could take 15-30minutes
Cheers

Hardware Configuration for Oracle DB on DELL Server

We are currently running Oracle 8.0.5 on Windows 2000 Advanced Server. This is a DELL PowerEdge 6600 server with 8 73GB Ultra SCSI Hard Drives. We will be upgrading to Oracle 9i in the future. Question: What would be the recommended Hardware RAID Configuration? We've heard that RAID 10 would be a good configuration to implement. What would be the best way for us to configure our server? We would like a high fault tolerance, good performance system. Our database isn't very large in size (10GB) but, we do require 24 x 7 availability. By the way, switching to a different operating system is not an option for us.

You've probably read this already; but, the documentation has some minimums: http://docs.oracle.com/cd/E26996_01/e18548/CHDJCIFD.html
The management server doesn't require anything special.
Regards,
Ian

Installing and configuring PHP for ORACLE 10g Release 1

Hello Lads,
Please can anybody help me finish PHP install...
I have got this error when executing the following command..
#make install
Here is the error:
/usr/local/php-5.1.4/sapi/cli/php: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Thanks!

I answered in your other thread... the one without the I in the title :)
nstalling and configuring PHP for ORACLE 10g Release 1

Is license required for Oracle 10g client on production

Is license required for Oracle 10g client on production?

Standard disclaimer: We don't represent Oracle. Your situation may be different because of specific wording in your particular Oracle contract, because of differences in licensing regimes over the years, because of laws in your particular country, etc. If you have a serious licensing question, you really need to address it to Oracle Sales. Explaining that some guy on the internet told you it was OK is going to be cold comfort if you're ever audited by Oracle and they disagree with my interpretation...
In general, no, you don't need a separate client license. The database is generally licensed to support a number of named users and/or all the users that a certain hardware configuration can support. Assuming the person using the Oracle client is connecting to a properly licensed database (and that they are one of the named users if that is the licensing regime), you shouldn't need a separate license.
There may be slightly different rules if we're talking about developers connecting to the database because of the "Oracle Programmer" set of licenses that appears on pricing sheets that I've never fully understood.
Justin

Oracle gateway for Oracle 10g DB on Windows 64 bit server

Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.

yingkuan:
Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database?

Long-term retention backup strategy for Oracle 10g

Hello,
I need design a Archivelog, Level 0 and Level 1 long-term retention backup strategy for Oracle 10g, It must be based in Rman with tapes.
¿Somebody could tell me what it's the best option to configure long-term retention backups in Oracle?, "CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1825 DAYS;" It's posibble ?
Regards and thanks in advance

Hello;
RECOVERY WINDOW is an integer so yes its possible. Does it make sense?
Later My bad, this is Oracle 11 only ( the gavinsoorma link ) . Getting harder and harder to think about 10. Don't think I would use RECOVERY WINDOW.
I would let the tape backup system handle the retention of your rman backups.
Using crosscheck and delete expired commands you can keep the catalog current with the available backups on tape.
Oracle 10
Keeping a Long-Term Backup: Example
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmbackp.htm#i1006840
http://web.njit.edu/info/oracle/DOC/backup.102/b14191/advmaint005.htm
Oracle 11
If you want to keep 5 years worth of backups I might just use KEEP specific date using the UNTIL TIME clause :
keep until time 'sysdate+1825'More info :
RMAN KEEP FOREVER, KEEP UNTIL TIME and FORCE commands
http://gavinsoorma.com/2010/04/rman-keep-forever-keep-until-time-and-force-commands/
Best Regards
mseberg
Edited by: mseberg on Dec 4, 2012 7:20 AM

Problem using template in database configuration assistant Oracle 10g

Hi,
I created a database using the database configuration assistant for Oracle 10g on a Windows Server 2003 box. The database I created worked perfectly, and I had saved it as a template so I could save some time when creating similar databases (which I have to do on occasion)
When I try to use the template though, I get an error (at about 4% through the database creation) saying:
ORA-01501: CREATE DATABASE failed
ORA-09314: sltln: error translating logical name
I'm creating this new database on the same server as the one I created my previous database on and NOTHING has changed on it, I did this just minutes apart and can duplicate it at will (just try and use a template)
Heres the template file contents (KM1.dbt)
<DatabaseTemplate name="KM1" description="" version="10.1.0.2.0">
<CommonAttributes>
<option name="ISEARCH" value="false"/>
<option name="OMS" value="false"/>
<option name="JSERVER" value="false"/>
<option name="SPATIAL" value="false"/>
<option name="ODM" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="IMEDIA" value="false"/>
<option name="XDB_PROTOCOLS" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="ORACLE_TEXT" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="SAMPLE_SCHEMA" value="false"/>
<option name="CWMLITE" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="EM_REPOSITORY" value="true">
<tablespace id="SYSAUX"/>
</option>
</CommonAttributes>
<Variables/>
<CustomScripts Execute="false"/>
<InitParamAttributes>
<InitParams>
<initParam name="O7_DICTIONARY_ACCESSIBILITY" value="TRUE"/>
<initParam name="background_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\bdump"/>
<initParam name="compatible" value="10.1.0.2.0"/>
<initParam name="core_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\cdump"/>
<initParam name="db_block_size" value="8" unit="KB"/>
<initParam name="db_cache_size" value="24" unit="MB"/>
<initParam name="db_create_file_dest" value="E:\oradata"/>
<initParam name="db_create_online_log_dest_1" value="C:\Oradata"/>
<initParam name="db_create_online_log_dest_2" value="D:\Oradata"/>
<initParam name="db_create_online_log_dest_3" value="E:\Oradata"/>
<initParam name="db_domain" value="JACOBSONCO.COM"/>
<initParam name="db_file_multiblock_read_count" value="16"/>
<initParam name="db_name" value="UDC7"/>
<initParam name="db_recovery_file_dest" value="E:\UDC7\flash_recovery_area"/>
<initParam name="db_recovery_file_dest_size" value="2048" unit="MB"/>
<initParam name="java_pool_size" value="0" unit="MB"/>
<initParam name="job_queue_processes" value="10"/>
<initParam name="large_pool_size" value="8" unit="MB"/>
<initParam name="open_cursors" value="1000"/>
<initParam name="pga_aggregate_target" value="24" unit="MB"/>
<initParam name="processes" value="150"/>
<initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
<initParam name="shared_pool_size" value="80" unit="MB"/>
<initParam name="sort_area_size" value="65536"/>
<initParam name="undo_management" value="AUTO"/>
<initParam name="undo_tablespace" value="UNDOTBS1"/>
<initParam name="user_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\udump"/>
</InitParams>
<MiscParams>
<databaseType>MULTIPURPOSE</databaseType>
<maxUserConn>20</maxUserConn>
<percentageMemTOSGA>40</percentageMemTOSGA>
<customSGA>true</customSGA>
<characterSet>WE8MSWIN1252</characterSet>
<nationalCharacterSet>AL16UTF16</nationalCharacterSet>
<archiveLogMode>false</archiveLogMode>
<initParamFileName>{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\pfile\init.ora</initParamFileName>
</MiscParams>
<SPfile useSPFile="true">{ORACLE_HOME}\database\spfile{SID}.ora</SPfile>
</InitParamAttributes>
<StorageAttributes>
<ControlfileAttributes id="Controlfile">
<maxDatafiles>100</maxDatafiles>
<maxLogfiles>16</maxLogfiles>
<maxLogMembers>3</maxLogMembers>
<maxLogHistory>1</maxLogHistory>
<maxInstances>8</maxInstances>
<image name="<OMF_CONTROL_0>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_1>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_2>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</ControlfileAttributes>
<DatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<tablespace>SNIKEB</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>false</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">-2</increment>
<maxSize unit="KB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<tablespace>SYSAUX</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">120</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<tablespace>SYSTEM</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<tablespace>TEMP</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">20</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">640</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<tablespace>UNDOTBS1</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">200</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">5120</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<tablespace>USER_DATA</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">5</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">1280</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<TablespaceAttributes id="SNIKEB">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">-1</initSize>
<increment unit="KB">-1</increment>
<incrementPercent>-1</incrementPercent>
<minExtends>-1</minExtends>
<maxExtends>-2</maxExtends>
<minExtendsSize unit="KB">-1</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<id>1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSAUX">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSTEM">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>3</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>-1</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="TEMP">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>true</temporary>
<defaultTemp>true</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>0</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="UNDOTBS1">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>true</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">512</initSize>
<increment unit="KB">512</increment>
<incrementPercent>50</incrementPercent>
<minExtends>8</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">512</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="USER_DATA">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">128</initSize>
<increment unit="KB">128</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">128</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<RedoLogGroupAttributes id="1">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_1_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="2">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_2_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="3">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_3_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
</StorageAttributes>
</DatabaseTemplate>
can anyone explain why I keep getting this error?
Thanks

Error:     ORA-9314
Text:     sltln: error translating logical name
Cause:     Internal buffer may have overflowed
Action:     See OSD error accompanying this message
Check alertlog and trace files.
Message was edited by:
FeNiCrC_Neil

Note 830576 - Parameter recommendations for Oracle 10g

hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,

hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards,

Hardware Requirement for Oracle Retail central office

Hi,
We are going with Oracle retail with following modules
1) Oracle retail central office (ORCO)
2)back office (ORBO)
3) pos (POINT OF SERVICE)
4) Sim (store inventory management)
Before i discuss with implementation team for hardware , i need advice on best hardware configuration for Orco (Oracle retail central office) and Sim
following prerequisite will be installed on ORCO prod server
a)11gR2
b) weblogic server 10.3.5
c)jdk1.6
d)ORCO application
following prerequisite will be installed on SIM prod server
a)11gR2
b) weblogic server 10.3.5
c)jdk1.6
d)SIM application
Note : Operating system for both servers Oracle Linux 5.3 above/ Redhat linux 5.3 above
application users may be 200+
Among both sun servers and HP which one is best and how should be the structure for both ORCO and SIM.

Moderator Action:
This post has been moved from the Oracle Linux forum, to the Oracle Retail forum.
You don't have a Linux question. You have a question specific to the usage of your application that just happens to be running on Linux.
Please note that this Oracle Retail forum has just recently (April 2013) been moved from ACTIVE status to an ARCHIVED status. That suggests that forum assistance for this product is being retired.
Get a support contract and use the traditional support path to Oracle's Technical Support instead of hoping for free forum tips.

VSS Agent for Oracle 10g ?

Hi there,
I have SAP NW2004s, Windows 2003 server 64bit, Oracle 10g
4 partition with 1 hdd, C for OS, D for SAP application E for system and oracle logs+archived, F for only database files
We are trying to get backup in extrinal HDD 3TB HDD... through Symantic exec backup utility ver. 12
C and D drivers are backup fine, but sometime when server very busy and symantic start full backup for E and D drive database shutdown... sap instance is fine, but only DB instance is stoped
We are not using Symantec Agent software, is there any other software can help for that for-exmaple VSS for oracle 10g... if yes, where may i get this software any link?
Why we are not using BR tools:
1 - as i maintion before when I select "E" drive which is all logs files located symantec stoped db instance
2 - in case if i am taking backup from brtools full backup online + archived so its only take database backup + archived, not all others structure in case hard-drive failer, and data restore from symantec so its will be ok with C drive and D drive, but its nohting resotre for E and D
when I try to restore from oracle brtools to restore its getting an error for missing structure in E
so thats why I am looking only one solution either perfect symantec with online backup
please give me some advised
Thanks

Hi,
Please use the standard & reliable Backup/Restore methods for any DB, to avoid more headache while Backup/Restore Operations.
Please refer [this thread|Re: Need some advise]. it will attend your most of questions. Some other alternatives (without using Backup agent) are mentioned there.
If you use Backup Agent to perform any DB backup, then It will be reliable method to perform Backup/Restore operations of DB.
With BR*tools u can also perform Non-Database Backup. Please refer [this link|http://help.sap.com/saphelp_NW04/helpdata/en/0c/cd271365debc42bef96ac7fd907787/frameset.htm] and other relative links.
If you have configured the Backup Exec utility with Oracle agent on the DB server, then you can perform Online Backup by deselecting "Perform the backup offline" option withing that Oracle Backup Job properties.
Regards,
Bhavik G. Shroff

SNMP FOR ORACLE 10G?

Hi all!
i am trying to configure snmp with oracle 10g so that i can monitor oracle from some network management system like tivoli, spectrum etc.
i checked in my $ORACLE_HOME/network , but there is no snmp directory ...nor does it have peer. Do i need to run some script to create the snmp directories or there is another path for the
CONFIG.master
CONFIG.encap
start_peer
files??? Please let me know if someone has configured that???
Also, how do you test whether the agent is running on the server or not??

Hi,
I'm trying to configure snmp for oracle 10g on Linux using OEM agents.
I followed all the steps mentioned in:
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b16244/chap2.htm#CHDCCEFB
I'm nto getting any output when I did snmp walk using below command:
snmpwalk -t 30 -M /usr/share/snmp/mibs/ -m all -c public localhost rdbmsMIB
When I did snmpwalk using below command:
snmpwalk -t 30 -M /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc -m all -c public localhost rdbmsMIB (only difference here with the above command is mibs directory)
output:
Cannot find module (CHARACTER-MIB): At line 7 in /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc/database.v1
Unlinked OID in RDBMS-MIB: rdbmsMIB ::= { mib-2 39 }
Cannot adopt OID in RDBMS-MIB: rdbmsWellKnownLimitedResources ::= { rdbmsObjects 10 }
Cannot adopt OID in RDBMS-MIB: rdbmsRelTable ::= { rdbmsObjects 9 }
Here I'm trying to monitor Oracle statistics through zenoss console. As an initial est i'm trying to configure the snmp for oracle 10g. Please provide me the complete list of steps on what to do after installing OEM for my requierment.
This will be a great help to me..
You can also mail me at [email protected]
Thanks,
Ranjeet

Documentation for Oracle 10g Lite

Hello
I have docummnetation for oracle 10g Lite but there is only informations what to do step by step. I'm looking generally informations about the features mobile databases, synchronization system, managment, and all development support. Where can I find them??

I run Oracle Lite on Pocket PC, and I make some simple program which did some operations on database. I know that the support for .NET is small. But I'm writing the master of science work about three mobile databases (sql ce, oracle lite and sybase) and I have to write a program which will be testing performance of those databases on the mobile device.
Generally I hope this program will work ok. But I also have to write about fuures for example oracle database lite RDBMS, but in documentation there is only few generally informations and almost all document is about how to configure it and how to do something.
So if you have some generally documents (I have those white papers and other pfd on oracle site) please send it to me [email protected] .

SAP database cluster for oracle 10g

Dear Experts,
Can anybody give me some idea on how do SAP database clustering for oracle 10g on two different remote system.
Is there any sapnote for this or any other help document. Is it possible to do on two different remote system.
Please guide me.
Thanks n regards
Bhaskar

Hi Bhaskar,
do you have SDN account, that allow you to access customer available information in SDN?
If yes, please look at the
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8cd93-f1e9-2910-c186-86bfff3dac63">MSCS Configuration and Support Information for SAP NetWeaver '04 and 7.0</a>
On page 20 you will find some helpful information.
best regards

Hardware Configurations for Oracle 10g AS

Similar Messages

Maybe you are looking for