Has anyone got experience of Windows 10 please ?

Hi,
Aplogies if this is the wrong board, I could not find a better one. I'm sure a CL will move it if it is.
I tried a search for "Windows 10" and all it returned was a post about NetProtect.
Has anyone got experience of Windows 10 please ? Is it better or worse than Windows 7, 8 or 8.1 ?
Best regards,
dfenceman

gg30340 wrote:
As the "free" upgrade option is available for a year after the launch of Windows 10, I would advise against being an early adopter. There will be the inevitable initial problems that seem to happen to all new Windows operating systems so I would wait for a few months until any problems/glitches etc are ironed out before upgrading your system.
@barnpiece
and @gg30340
Wise comments, I think.
Upgrading to Vista from XP destroyed a very expensive, and powerful 3d graphics program of mine. It's going to cost another £400+ just to upgrade to the Windows 8 version.
It can be run, with considerable difficulty on Windows 7, in Windows compatibility mode.
For Windows 10, there are similar considerations.
There are posts on the Windows, or perhaps Internet Security websites, assuring us that all will be fixed on the day
Windows states that "most" programs compatible with Windows 7 or Windows 8.1, will be compatible with Windows 10.
Just wait for a while.

Similar Messages

HT4759 Has anyone got outlook on windows icloud working with you OS devices?

I have my eamil account creates, and its is live, but I cannot get icloud to syncronize with the account. Any tricks out there? What about my business accounts? do I need to copy this over everytime? Any help would be well appreciated

DQDUDE wrote:
I have my eamil account creates, and its is live, but I cannot get icloud to syncronize with the account. Any tricks out there? What about my business accounts?
Business accounts should not be on a free service, unless you consider them to be worthless.
What is this email that won't sync, is it an iCloud account or some other?

Hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

use it on a diffrent network if u dont have a mc donalds or sone other place to test it most librarys have wifi just to make sure its not that if its not the wifi falut and the app has been re installed may be a bug since this game is still pretty new

HAS ANYONE GOT THE FLASHPLAYER ON A IPHONE 4 PLEASE

HAS ANYONE GOT THE FLASHPLAYER ON YOUR IPHONE 4 PLEASE OR WISH ONE WILL PLAY THE TWITTER MOVIES PLEASE?

iOS devices do not support Flash.

Has anyone got UCM 11g running on Windows 7 64bit?

Hi,
I've just installed UCM 11g on a 64bit Windows 7. During installation I had some issues concerning the user rights, but now almost everything works fine.
Except of two issues:
1. when starting the UCM (startManagedWebLogic.cmd) I get the following exception:
!csNativeOsUtilsError!syNativeOsUtilsNotLoaded!syJavaExceptionWrapper,java.lang.UnsatisfiedLinkError: intradoc.common.NativeOsUtilsBase.getNativeVersion()Ljava/lang/String;
java.lang.AssertionError: !syNativeOsUtilsNotLoaded
     at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:386)
     at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:352)
     at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:26)
But the server is running.
2. Fulltext-Search doesn't work.
Message in the UI:
!csUserEventMessage,weblogic,localhost:16200!$!csSearchUnableToReturnResults
intradoc.common.ServiceException: !csSearchUnableToReturnResults
at intradoc.server.SearchManager.retrieveSearchInfo(SearchManager.java:269)
at intradoc.server.SearchService.retrieveSearchInfo(SearchService.java:1811)
at intradoc.server.SearchService.doLocalSearch(SearchService.java:1360)
at intradoc.server.SearchService.getSearchResults(SearchService.java:654)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
As UCM is not certified for Windows 7 I'm not sure if this is a configuration issue or a generel problem with Windows 7.
Has anyone got this installation run on Windows 7 (64bit)?
bye Stephan...

Assuming that you want to install the 64 bit UCM 11g version:
Issue with installer closing screen could be related with JAVA_HOME variable or wrong java version.
1. Check if 64 bit JDK (not JRE) is installed in a directory without spaces (not default Program Files… but something like C:\Java\).
2. Check if windows environment variable JAVA_HOME exists and is pointing to JDK directory (like C:\Java\jdk1.6.0_24)
3. Open command prompt and check java version with: java –version. It should return “Java HotSpot 64-Bit Server”.
A little bit more deatils here: Re: Installation issues with WebCenter UCM 11g
Regards,
Boris

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

Has anyone got iFS working in Tomcat ?

iFS 1.1.9
We have a urgent need to get iFS running in a Servlet 2.2 container and OC4J does not support iFS yet. I know this is not supported but has anyone got iFS working in Tomcat ? If so, pls do me a BIG favour by letting me have your config files, such as
- server.xml
- <tomcat home>\conf\web.xml
- web.xml for the tomcat context)
- wrapper.properties (if you are using tomcat as an NT service)
- tomcat-apache.conf (or equivalent)
- <oracle home>/apache/apache/conf/httd.conf
- A listing of relevant environment variables (by doing a "set>env.lis" or similar)
- and any other files you might think is relevant
Thanks a million in advance.
null

iFS 1.1.9 / Oracle 8.1.7 / Tomcat 4.0.1 / Windows 2000
After several hours of fiddling around with the configuration
files, I finally got the iFS up and running on my test machine.
Briefly here's what I did:
1) create application directories
<tomcat_home>/ifs/files/WEB-INF/classes
<tomcat_home>/ifs/files/WEB-INF/lib
2) Add the following to <tomcat_home>/conf/server.xml:
<Context path="/ifs/files" docBase="ifs/files"
debug="0" reloadable="true">

<Environment name="ORACLE_HOME" type="java.lang.String"
value="oracle_home"/>
<Environment name="ORACLE_SID" type="java.lang.String"
value="sid"/>
<Environment name="LD_LIBRARY_PATH" type="java.lang.String"
value="oracle_home/lib:oracle_home/ctx/lib"/>
<Environment name="NLS_LANG" type="java.lang.String"
value=".UTF8"/>
</Context>
Please replace oracle_home with your installation directory and
fill in your SID as well.
3) create <tomcat_home>/<tomcat_home>/ifs/files/WEB-INF/web.xml
with the following definitions:
<servlet>
<servlet-name>oracle-jsp</servlet-name>
<servlet-class>oracle.jsp.JspServlet</servlet-class>
<init-param>
<param-name>logVerbosityLevel</param-name>
<param-value>WARNING</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>oracle-ifs-servlet</servlet-name>
<servlet-
class>oracle.ifs.protocols.dav.impl.IfsDavServlet</servlet-class>
<init-param>
<param-name>classpath</param-name>

<param-value>
tomcat_home/webapps/ifs/files/WEB-INF/lib/ojsp.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/webui.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/adk.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/http.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/repos.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/email.jar;
tomcat_home/webapps/ifs/files/WEB-
INF/lib/release.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/utils.jar;
tomcat_home/webapps/ifs/files/WEB-
INF/lib/settings.jar;
tomcat_home/webapps/ifs/files/WEB-INF/classes;
tomcat_home/lib/xmlparserv2.jar;
tomcat_home/lib/classes12.jar;
tomcat_home/common/lib/servlet.jar;
</param-value>
</init-param>
<init-param>
<param-name>ifs.dav.servicepassword</param-name>
<param-value>manager</param-value>
</init-param>
<init-param>
<param-name>encode_to_java</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>page_provider</param-name>
<param-
value>oracle.ifs.protocols.dav.impl.jsp.IfsJspResourceProvider</p
aram-value>
</init-param>
<init-param>
<param-name>page_repository_root</param-name>
<param-value>ifs_home/ifsjsps</param-value>
</init-param>
<init-param>
<param-name>unsafe_reload</param-name>
<param-value>false</param-value>
</init-param>
<init-param>
<param-name>developer_mode</param-name>
<param-value>true</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>oracle-ifs-servlet</servlet-name>
<url-pattern>/*</url-pattern>
</servlet-mapping>

<servlet-mapping>
<servlet-name>oracle-jsp</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
tomcat_home and ifs_home must be replaced with your installation
directories.
4) Copy the iFS and Oracle JARs to the locations specified in
web.xml
You may choose either the applications lib directory or the more
general tomcat_home/lib for that purpose.
One hint on libraries: Tomcat will ignore ZIP files, you have to
use JAR. I renamed Oracle's classes12.zip to classes12.jar for
that reason.
5) Create settings.jar
This was the most tricky part. I packed everything under
ifs_home/settings into the file settings.zip, renamed this to
settings.jar and moved it to the WEB-INF/lib directory. Seems a
bit of a kludge to me, anyone with a better solution is welcome.
6) Start tomcat
7) try http://yourtomcathost:8080/ifs/files/index.html
You should see the ifs login screen then.
One word about the application environment. In this
configuration every user class has to go into
<tomcat_home>/ifs/files/WEB-INF/classes, the
ifs_home/user_classes is of no use here. And don't try to set
the classpath within catalina.bat, tomcat will completely ignore
this setting.
Finally, I know that this environment is not supported but as
long as the iFS servlet meets the standards, every standard
compliant servlet engine should do the job.
Good luck

Has anyone got the QT stand alone installer to work?

OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
Mark

I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

I cannot purchase level 96 on candy crush saga. It says there is an error with my account payment, there is money in there to support a purchase. Anyone got the answer for me, please ?

I cannot purchase level 96 on candy crush saga as it says there is an error with my payments. There is money in the account, as I have checked. Has anyone got an idea of what the problem is ? Please.

https://expresslane.apple.com/Issues.action

Has anyone got elisa running?

has anyone got elisa running?
i've installed now elisa for the 3-4 time in ~one year and it's still not running. at least i get now the shiny start menu, but when i choose video, music, etc entry and then a directory it simply does nothing and gives out tons of debug errors/messages. and yes, i ugraded to the latest plugins package. don't trust shiny things...
vlad
ps: ??? the youtube plugin seems to work ... no it doesn't: i get this strange error "Message: don't know how to handle video/x-h264". though i have _all_ gstreamer-{ugly,dirty,good,evil}-plugins installed.
elisa is made for the ubuntu people. should it then just simply work? hmm
Last edited by DonVla (2008-07-15 19:19:05)

wonder wrote:there are missing dependency: pil and python-pysqlite.
extra/python-pysqlite-legacy 1.0.1-4 [installed]
A Python DB-API 2.0 interface for the legacy SQLite 2
extra/python-pysqlite 2.3.5-1 [installed]
A Python DB-API 2.0 interface for the SQLite embedded relational database engine
extra/pil 1.1.6-4 [installed]
Python imaging library
all installed....
btw: i don't get the packaging policy for elisa: why is there elisa and elisa-plugins? and why is elisa a dep for elisa-plugins and not the other way round? the install file says: "PLEASE NOTE: elisa-plugins package is needed at elisa to work". hence it's a dependency...
Last edited by DonVla (2008-07-15 19:24:55)

Has anyone got cn8202temp_controller.vi to work?

Hello,
Has anyone got cn8202temp_controller.vi to work. I got it from the Ni website and I've been unable to get it to run right. If there is anyone out there that has got it to work please tell me how you did it. It has an error when you upload the parameters for the recipe. I have enclosed the vi if you want to take a look.
Thanks for your time,
Attachments:
cn8202temp_controller.vi ‏605 KB

Hey Jordan,
Thanks for responding. The recipe I am using is start from room temperature (20ºC), ramp up to 100 ºC over a period of 15 minutes, remain there for 10 minutes, and then ramp up to 1200ºC over a period of 110 minutes, remain for 10 minutes, then ramp down to 20ºC over a period of 280 minutes. I ran through all the string codes in the program and the only two I can't validate is Run Recipe string $0101W065.0000G2 and the cancel recipe string $0101W063.0000G0
I called and sent emails to Omega on this issue and their response is that they don’t do third party programming. I was hoping that by posting it on here that someone may have used the program and could confirm if it works or not and if it didn’t work could possible tell me what needs to be changed. I’m really beating my head against the wall here and use help from anyone.
Thanks again.
Kevin

Has anyone got Python to work on the N96???

Has anyone got Python to wok on the N96?
I have downloaded and installed the latest edition 3rd 1.4.4 i think. it goes on the phone without any problems.
However when trying to use app that use python specifically pyPiow at the moment the app goes on the phone but nothing happens when i try to open it!
is it somthing i am doing wrong, where go i install the pictures, or the apps for that matter, can the apps go on the mass memory where they are now or do they have to go on the very small phone memory?!
does current python work at all on the n96
has anyone had any joy?
please help!
cheers

I managed to get it to work, you have to install two files
the first for the actual python script files.
the second for the user interface.
you might have installed the user interface, but without installing python, and that's why its not loading up the application, also make sure you install python to phone memory.
On my N96 I installed:
Python for S60 1.4.4
Python script shell 1.4.4
if you get an 'update error' when installing its because you have not un-installed all of the old python stuff, open app manager on the handset and un-install all python relating files
one last thing, install python and the shell to the phone memory (c drive)
Hope it helps
Tony

Has anyone got the Comsoft Profinet example code working??

Hello!
I have a cRIO Profinet card and I'm attempting to get the example code working.
I have followed the instructions in GettingStarted_cRIO_PN_IO_Device.pdf
I have created an empty project with just the 9023 and 9113 present, and copied the 3 items from the example project cRIO PN IO-Device (LV 2012) as per the documentation.
When I try to compile I get the error shown attached. I cannot view the error as the VI is password protected.
In 5 years of working with cRIO using many different c-series modules from NI and 3rd parties I have never come across a password protected example Vi - this is very disappointing! I don't see how it will be possible to use the card without being able to access this VI, and clearly it is impossible to use it without this VI as they are unwilling to share its functionality.
Has anyone got this working on anything other than a 9104 (which the example uses?) Does anyone know the password? Is it possible to use the card without using this example code?
I will be communicating with a Siemens PLC (acquiring a load of U16s and logging on the cRIO at 20ms intervals).
Many thanks for any input, or any experiences of using this card.
Aaron
LabVIEW/RT/FPGA 2012
NI-RIO 12.0.1
cRIO 9023 controller and 9113 chassis with COMSOFT PN module in slot 1.
Attachments:
PN_error.png ‏44 KB
PN_error2.png ‏20 KB

Just for the record, I am using the CRIO-PN with cRIO-9081 and cRIO-9068 integrated chassis successfully.
LabVIEW (RT/FPGA) 2013 SP1.
I didn't use the higher level ComSoft example code directly, as the VIs use so many control/indicators that the FPGA usage is sky high. I rewrote them to pass the I/O data via DMA FIFOs.

Ios 8 keeps crashing on my iPad 2. Has anyone got a solution to this. My iPad 2 was great before upgrading.

ios 8 keeps crashing on my iPad 2. Has anyone got a solution to this. My iPad 2 was great before upgrading. It's so bad that now I want to throw my iPad out so if anyone has tips to enhance my iPads performance please share.

I would read up on restoring your device
Restore
http://support.apple.com/kb/HT1414
Especially if you installed the update over the air, a restore, which will use a computer to install the iOS again sometimes helps. There seems to be better results from doing it via iTunes than over the air

I am trying to import external CSS in Edge Animate, Has anyone got a "simple" example showing this working that I could have a look at?

I am trying to import external CSS in Edge Animate, Has anyone got a "simple" example showing this working that I could have a look at?

Hi Vivek,
Thanks a lot for replying, actually i am creating a short LAMP animation. In which i used Blur filter on the fire flares(SVG images), everything works just fine on google chrome, but for IE10 & Firefox the filter seems not working, so i need to know is it possible to override the fallbacks for the Blur Filter through external StyleSheet.
IE10 & firefox rendered Image, blur filter not working Google Chrome rendered Image, blur filter working perfectly
So, can you please guide me, what shall i do in maintaining quality of my graphics as well while such animation's.

Has anyone got experience of Windows 10 please ?

Similar Messages

Maybe you are looking for