Has anyone read the sticky above about syncing issues?

I am talking about this sticky "Troubleshooting iPhone contact and calendar syncing on Windows". I have tried everything but the last step. Uninstalling itunes and reinstalling it. they say remove itunes completely from your computer and then download it agian and reinstall.
I upgraded to 7.7 no problems but I had an older version like many others on my PC. If I follow these directions and compeltely remove itunes then reload 7.7 won;t I lose all my itunes information since it was removed before upgrading?
Just want that clarified before I have to add all the music back to my PC with lyrics and artwork...that would take forever...

When you refer to the 'iTunes information' do you mean your music collection? The answer is that you wont lose it - the software will be replaced with the new version but all your music will still be there. However, as they say in this IT business, always make a back up before making any drastic changes...

Similar Messages

TS1286 Hello All, I am using a PC and have an iphone - has anyone gotten the error message when sync'g itunes Ox800000A?

Hello All,
I have lost the ability to connect to itunes to update software and apps etc., My PC is giving me an error message of Ox800000A - apple says it may be a USB port problem. Has anyone else received this error problem and if so did you fix it and how?
The USB ports on my PC are working fine? Thanks in advance.

Hi MarcusAH,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/ts3221?viewlocale=fr_fr#0xE800000a
About unknown error 0xE800000a
When connecting your iOS device, iTunes might display an "unknown error 0xE800000a" when the contents of your lockdown directory are unusable. Do the following depending on your operating system:
Windows XP
Disconnect all iOS devices from your computer, and quit iTunes.
Open My Computer from the Start menu.
Choose Tools > Folder Options in the file browser window then click the View tab and change the "Hidden files and folders" option to "Show hidden files and folders."
Click OK.
Navigate to the following folder on your computer, noting that the drive letter can vary depending on which drive letter Windows starts from:
C:\Documents and Settings\All Users\Application Data\Apple
Move the Lockdown folder to the Recycle bin.
Reconnect your iOS device and open iTunes.
Windows Vista or Windows 7
Disconnect all iOS devices from your computer, and quit iTunes.
Open Computer from the Start menu.
Choose Organize > Folder and search options. In the file browser window, then click the View tab and change the "Hidden files and folders" option to "Show hidden files and folders."
Click OK.
Navigate to the following folder on your computer:
C:\ProgramData\Apple
Move the Lockdown folder to the Recycle bin.
Reconnect your iOS device and open iTunes.
Hope this helps,
Mario

Has anyone got the calendar and contact sync with MS Outlook to work?

Office Version:Office 2007Operating System:Windows 7
I've used Outlook for several years. I use the Outlook Connector to link to my hotmail account for mail and Outlook's functionality for contact and calendaring.
Recently my appointments seem to have taken on a life of their own. After entering them they look fine but at some point the appointment title is being changed to "Private Event". I can open the appointment and it looks ok. In fact, the little lock icon for making the appointment private is not enabled so I can find no visable reason for the appointment to be marked private.
I am the only user and I have administrator rights. Also, none of my much older appointments are being changed, most of them being reoccurring appointments that haven't been opened in some time.
It looks like what you might expect if you were a delegate on an Exchange calendar. But in this case my Outlook is just a local, standalone installation with no Exchange server.
I can't be absolutely certain but I think the timing of when this started was a couple of weeks ago when I attempted to set up sync between my iPod Touch and Outlook. I never opened Outlook [that I know of] during the process. I just set the sync options in iTunes to Outlook. Nothing ever got copied over to the iPod but I think that the privacy issue began about the same time.
Any idea what may be causing this?
Thanks in advance for your help.

Yes thats correct & it should showup if already checked.
When I checked the https://p15-calendars.icloud.com/holiday/FR_fr.ics
also https://p15-calendars.icloud.com/holiday/UK_uk.ics ofcourse it could be any page from
p 0- to p 20- but nothing happens from the UK one but the FR it auto downloads does not instal into
Calendar it will ask you for permision first.
I have many calendars too Europe, Asia etc:
This is what info of active Holiday Cal looks like.

Has anyone solved the bluetooth pairing after sleep issue

I still get this problem I wake my mac and no mouse ! it won't pair, prefs says its connected but its not. A reboot works, but whats the piont of that it should work..

Great, done that appears to have done it. I will check after an extended sleep, as thats when it tends to go wrong.
It is a bit tedious to have to keep ironing out Lion bugs. If I had spent £350 on a Windows machine I would expect this, but when I spend £2000 on a Mac I do feel it should just work.

Has anyone in the uk had a preparing for shipment email about there apple watch yet

has anyone in the uk had a preparing for shipment email about there apple watch yet ?

Hang in there Smurf ! Mine only updated 30 mins ago ( not that I was checking. Cough ! Cough! ).

After getting the latest update I recieve an error about MSVCR80.dll missing has anyone found the solution as uninstalling and re installing doesnt work

after getting the latest update I recieve an error about MSVCR80.dll Missing, has anyone found the solution as uninstalling and then installing doesnt seem to work

Doublechecking. Have you tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

Has anyone put the RAR Background Job Spool on a different server?

We are on GRC 5.3 SP 13.
Has anyone put the RAR Background Job Spool File Location (assigned in the Miscellaneous configuration section) on a server different than the one that the GRC Frontend/Java system is on?
I currently have it assigned to a folder on the GRC server, but it is running out of space. I am having a problem getting the users to delete old reports as they say they need to keep them for internal Audit controls. They are also resisting downloading the reports (more work for them). I have been told that we cannot easily increase the file space on the GRC server (would basically have to purchase more storage and rebuild the server).
I was thinking about moving the folder over to our virtual storage area, were file size can be more easily expanded. I haven't found any documentation that says the folder has to be on the GRC server, but I also haven't seen any examples of where it has been put on a different server.
Has anyone done this, and did you run into any problems?
Thanks.

Hello Bob,
I got your point. Probably there's no recommendation about this, because the recomended practise is to delete or archive the spools as suggested in note : Note 1511027 - Periodic clean up of spool files
If you have a requirement to keep these files "online", I think the option to save them to a network drive is fine. I haven't tried it for this specific scenario. You have to take into account:
- Specific user to connect to FileServer
- Availability of the FileServer. If the FS is down, the RAR job will cancel.
- Performance. I mean, write to a local disk is not the same to write to a network drive. This point is very difficult to measure, because it depends on a lot of things like network speed, server load, etc.
Maybe someone has already implemented it and gives you more hints.
Cheers,
Diego.

Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore.

Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore. Please help!

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

Has anyone fixed the following droid razr problems:

Has anyone fixed the following droid razr problems: 1. the phone won't let me answer calls, if the answering screen shows up it takes 5 rings; 2.It takes about 4 attempts to end a call, half the time I have to wait for them to hang up; 3. GPS will stop and freeze; 4. phone freezes doing simple tasks; 5. It won't flip through easily; 6. slow (deleted texts and photos and still slow); 7.deleted apps still show on phone; 8. battery life is about 3 hours if used constantly; 9. some people cannot call me; 10. typed text takes a very long time to appear on the phone.

Try this:
Wipe Cache Partition - DROID RAZR / RAZR MAXX by MOTOROLA
Performing a wipe cache partition will remove any temporary files that may be causing an issue with the device. All personal files and settings will not be affected by this option.
Power the device off.
Press the Power button then select Power off.
If the device doesn't respond to input, press and hold the Volume Up / Down then press and hold Power button. When the device screen goes blank, release the Power button while continuing to hold Volume Up / Down then proceed with step 3.
Press and hold the Volume Up / Down then press the Power button.
When presented with the Boot Mode Selection Menu, release all buttons.
Press Volume Down to select Recovery then press Volume Up.
From the Droid triage screen:
Press and hold Volume down.
Press and release Volume up.
Release Volume down.
Select wipe cache partition then press the Power button.
Use Volume keys to navigate options.
Select reboot system now then press the Power button.
Use Volume keys to navigate options.

Has anyone addressed the AUR haskell depends/makedepends fiasco?

I've been searching around here, the web, and flyspray, and haven't found anything yet. Has anyone addressed the depends/makedepends fiasco with the Haskell PKGBUILD generated by the arch-haskell script?
haskell-hdbc-sqlite3 > grep -i depends PKGBUILD
makedepends=('ghc' 'haskell-cabal' 'haskell-hdbc>=2.1.0' 'haskell-utf8-string' 'sqlite3')
depends=('ghc' 'haskell-cabal' 'haskell-hdbc>=2.1.0' 'haskell-utf8-string' 'sqlite3')
Do all 1000+ PKGBUILD have this problem? Surely someone's looking into this, right?
--EDIT--
There are incorrect dependencies. There are 31 packages that depend on haskell-time of which a newer version is in GHC. The licenses are in non-standard places. Etc.
*** I recommend that all packages created by arch-haskell get removed from the AUR. ***

skottish wrote:
Do all 1000+ PKGBUILD have this problem? Surely someone's looking into this, right?
--EDIT--
There are incorrect dependencies. There are 31 packages that depend on haskell-time of which a newer version is in GHC. The licenses are in non-standard places. Etc.
*** I recommend that all packages created by arch-haskell get removed from the AUR. ***
Hello skottish.
Thanks for the bug report. It would be better directed by reporting a bug to the Arch Haskell team, http://www.haskell.org/mailman/listinfo/arch-haskell
Just some background, the Arch Haskell team is an group of about 12 developers, including 2 Arch core developers, engaged in supporting the Haskell programming langauge on Arch, bring the Haskell community to Arch, and advocating for Arch Linux. The effort is centered around the #archhaskell irc channel, the arch-haskell@ mailing list, archhaskell.wordpress.com and the wiki.
We're aware of the depends/makedepends issue. cabal2arch, the tool that packages Haskell software for Arch, used a seemingly incorrect understanding of the semantics of makdepends and depends. That has been fixed. Packages are being updated incrementally, and the situation as is causes no harm. The current semantics for Haskell packages wrt. dependencies are stated here: http://www.haskell.org/pipermail/arch-h … 00193.html
Regarding haskell-time, the reason packages are using an older version of haskell-time is that Arch Linux supports the Haskell Platform http://hackage.haskell.org/platform/ which specifies which versions of libraries to support on a distro. We follow that. It is a policy decision.
Regarding the licenses, they're placed where the package guide says. http://www.haskell.org/pipermail/arch-h … 00196.html
I'm not sure what you mean by "Etc." but if you have a bug report in the packaging system, please report it to the mailing list.

Has anyone received an update on apple tv issue with HD movies and what they are doing about it

Has anyone received an update on apple tv issue with HD movies and what they are doing about it

Whatever the rep told you, it is complete nonsense. There is clearly a problem at your end, the Apple TV 3 is capable of more than the Apple TV 2, and you clearly have the Apple TV 2 working perfectly. Since the Apple TV 2 is able to download from the Internet properly, then my suspicion would be your problem lies on your local network. Interference is a common problem on local networks.
Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Has anyone bought the new ATI/MSI RS480M2-IL s939 motherboard yet?

Has anyone bought the new ATI/MSI RS480M2-IL s939 motherboard yet?
If Yes, How is It?
This seems from what I've read at least to be a good or even great overclocker, It's too bad that It isn't a full ATX motherboard, Maybe If sales are good enough MSI will use this chipset on a Full size ATX motherboard one day. Of course It does have an Integrated ATI video card in It and It have as much as 128Mb ram for the pci-e built-in video or You could add a separate pci-e video card in the 16x slot. It's $94.00 right now on pricewatch.com of course.
http://www.msicomputer.com/product/p_spec.asp?model=RS480M2-IL&class=mb

Quote from: mamisano on 23-February-05, 12:27:21
Ordered one for a home workstation from ZipZoomFly.com. Also picked up a 3000+ and already have 1GB of Adata PC4000. Will be utilizing onboard video until I have the need/desire to upgrade to PCI-Express video card. Hard drive will be a new Maxtor 250GB ATA-133 16MB Cache that I picked up from CompUSA for $99/no rebates :D
I will post my thoughts after the system is together, should have parts by Thursday/Friday.
Well at least You aren't buying from Logic Circle Systems That place will ship incompatible ram that is Intel approved and say then It is You cpu that is at fault, I should know I'd bought zoom3's motherboard and some Wintec ram(Samsung chips ending in TCCC) and They said they were tested and AMD approved(They aren't, Wintrec is Junk on an AMD Platform), I now have a Corsair CMX512RE-3200LL Dimm and My cpus work fine at PC3200 speeds and above, Logic Circle Systems said was at fault. Logic Circle Systems is a bunch of Liars and are not trustworthy.

Has anyone installed the new firmware?

Has anyone installed the new firmware yet? And have you noticed any issues with it? I'm weary of installing Apple's firmware updates after how terrible the last one was (I'm sure everyone remembers the hdd hangs). Also, Apple's trackpad update was terrible as well for the first few weeks it was out.

Because I was one of the users affected last time.
http://discussions.apple.com/message.jspa?messageID=10416721#10416721
Not just a tiny amount of people. Lots of people had this issue. Firmware downgrade is what solved it, until Apple released an upgrade of the upgrade. I just wanted to check if anyone was having issues with this firmware before I upgraded.
And I'm not sure why people are getting so offended. It's a simple question of "did upgrading to the new firmware screw up your computer", and requires a yes or a no answer. The last two times I installed an update it messed with my computer, so it makes sense for me to be weary. You would be as well if you were in the same situation. And I have not yet heard anything about this firmware, but I haven't had time to check out what people have said. I'm in med school and I'm usually fairly busy.

Has anyone replaced the inside piece to the charger on a Satellite?

Has anyone replaced the inside piece to the charger on a Satellite? I broke it and I feel like I may be ab le to fix it if I can get the overtorqued screws out. I would also have to find the proper part.
Any help would be appreciated!

I haven't done it but you can go here to compare
temps of people who have done the fix.
If you look at the values, they vary extremely.
The dual core chip set is designed to run hot... The case, on the other hand, is another story.
For what it is worth, I think all youse guyz are focusing on the wrong issue... the case design. The chips are meant to be quite warm as they do their job, but the case's exhaust goes in FRONT of the LCD screen, just above your function keys.
The keyboard area above the power inverter and airport card is not thermally shielded, so heat goes up, through, and past the keys (QWE ASD area). The bottom of the case plastic has no thermal layering, hence you get hot legs.
Elevating the back of the MacBook helps tremendously.
Knocking back the duocore CPU temperature by an across-the-board 10 - 15 degree hit will still result in a very hot computer.
It is the case.... The case is the problem child.

Has anyone read the sticky above about syncing issues?

Similar Messages

Maybe you are looking for