Has anyone seen incorrect date metadata on import?
I'm importing HDV video and have tried it with both a Canon XH A1 and Vixia HV40. I'm seeing the date offset by exactly one day—what appears as 11/20/2010 1:30 PM on the camera gets imported as 11/19/2010 1:30 PM in FCP X.
I've confirmed that the date settings and timezone are correct on both cameras and my computer as Pacific Daylight Time. Playback on the cameras confirm the date as 11/20. And changing the date settings on the computer just confirms the correct time zone offset; i.e., setting the camera to Eastern Time brings the footage in as 11/19/2010 4:30 PM. So the date is still wrong, but at least I know the metadata correctly thinks it's in the Pacific time zone.
I can't say for certain that this is a new problem. Honestly, I've never looked at this closely before, but FCP X's ease of grouping clips and the smart collections make this metadata much more useful for me. Has anyone else seen this kind of date issue, or does anyone have a possible explanation/solution?
I just imported several HDV tapes from my Sony FX1 and I am seeing the "Content Created" date 5 hours earlier than the time reported on the tape. This camera does not have a time zone menu setting. Instead it has a "world time" setting that, of course, I never set and is currently at 0. So I did an experiment where I set my world time to -5 and reset the clock to the current time. Then I recaptured a short bit of footage. I still see the same 5 hour offset. Next I recorded some video with the adjusted clock and captured that. I still have the same 5 hour offset.
A standard definition DV tape recorded in October 2005 shows "content created" 1 hour later than the date on the tape. I should note this was captured on a Canon Optura Pi SD camcorder. Go figure. I would love any suggestions on how to get the time on the tape to match the time in FCP X. I don't see that it is very useful to capture much more footage till I figure this out...
Checking Final Cut 7 it does not appear that you can even display the content created date.
Similar Messages
-
some import operations were not performed , could not copy the file to requested location , has anyone seen this or have a fix?
cormacc57361247 wrote:
has anyone seen this or have a fix?
Oh, I bet that if you'd done a site search, you'd have got answers to both of those questions... -
My iPages has frozen up whilst importing a Word file into iPages. I can no longer use this software. has anyone seen this before. Thanks, Ken
Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love -
We've just now upgraded from Leopard to Snow Leopard and are having a problem with Apple ProRes 4444 and alpha channels in Motion 4. A clip with an alpha which keyed perfectly before the upgrade, now will not key. If I convert the clip to the Animation codec, it keys perfectly. If I export the Motion project as a ProRes 4444 self contained movie, it will key when brought into FCP 7 but if I import the project into FCP 7, it will show the key in the viewer but not the canvas. Has anyone seen this or have any suggestions on how to correct this? Is it a bug?
Thanks,Motion 4.0.3
It just doesn't seem to recognize the alpha at all. -
Has anyone seen a DRASTIC change in speed after upgrading to 5.7?
Has anyone seen a DRASTIC change in speed after upgrading to 5.7? Just the simple task of copying photos now takes FOREVER. Importing iphoto for just two years of photos (my smallest iphoto library by far) took A WEEK. I did not have access to Lightroom for a week. I thought it was just going to be the iphoto import, but now my regular import is taking almost 1/2 an hour and only 22 photos into the import.
Oh no! I think I might be experiencing the same problem, oddly with almost exactly the same time to import from iPhoto, just shy of 7 days...
I also posted this problem to the form and am actually on the phone with Adobe support right now. I have an iPhoto library of ~15,000 photos and I didn't expect it to be very fast, but it's taking an average of at least 40 seconds per photo to import, and it has kept complete focus of LR so I can't even confirm that it isn't importing duplicates. By my calculations it should take over 166 hours to complete the import! Something has to be wrong here. I've been going for over 48 hours and am scared to stop the import if this really is normal performance.
Are normal import tasks also slow for you now? Can you share any more details? I can't test myself yet since the iPhoto import is still churning, but it could help troubleshooting with support. I'll let you know if they come back with anything, I'm on hold now. -
Installing itunes; headaches.has anyone seen this??
Itunes and my iphone 3 and 4 have always been user friendly until this newest upgrade/software update. After uninstalling and trying to reinstalling right when its almost complete..gets to the obtaining publishing data, an error.." An error occurred during the installation of assembly Microsoft.VC80.CRT,type="win32 version="8.050727.4053".publicKeyToken=1fc8b5b9a1e18e3b".processorArchitecture= "amd64"". Please refer to Help and Support for more information. HRESULT:0x800736FD.
HAS ANYONE SEEN THIS BEFORE? HELP!Hello,
As I promised, we checked in AVAYA center with AVAYA engineer how E60 works with AVAYA SIP server. We found that there is a problem to begin usage of IP telephone service. E60 always sad that craeted profile "Not registered". And don't like to act with WLAN network although WEB-browser works fine in the same time with the same AP-7 and WLAN settings.
AVAYA took a timeout for identify what's a problem with E60. Some terms on Nokia setting don't correspond to AVAYA terms.
I hope that it will take not a lot of time for AVAYA.
I'll let you know about the results.
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8 -
Express cards/34 (EVDO and others) due in May or June, has anyone seen any?
According to several sites, EVDO express cards are due in May or June that are definitely MAC compatible. (PC mag this morning >news and analysis > Novatel to launch first EVDO...)
On another thread, someone referenced SATA cards due out in May or June also.
The Novatels will be Sprint or Verizon originally and HSPDA later but will definitely be for the MBP as well as pc intel core duos.
Has anyone seen any non-vaporware expresscard/34s right now?
These actually existing and functional will make the difference for me and others waiting to transition to the MBP. I bought the G415 after the MBPs were already out because I needed my EVDO data coverage.
Message was edited by: RhydFeb 07 is the rumor for Sprint - Novatel Express/34. Been in the pipeline for a year.
However, it will not be natively Mac compatible - possibly not Mac compatible at all. The wireless connection manager software has not been ported to Macintosh yet.
The Novatel U760 USB modem, on the other hand, is available now, $50 after rebate, and works with Macs quite easily. 1.1Mbit/sec download on EVDO RevA networks.
W. -
Has anyone seen this issue before?
Possibly. Do you have other devices and will they connect?
One possible thing that it could be is that the USB port on your iPad has gone bad. It happened to mine. Couldn't sync, could barely charge (it said 'not charging' even when plugged into the wall)
I'd take it to the apple store, see if they can replicate it, and if they can, then they can diagnose it. Just back it up before you go, in case they do exchange it. -
I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this??? I have tried downloading this at different times of the day, and have also tried it on different internet service providers ... still recieve same error msg...
Try this article (disable firewall)
http://support.apple.com/kb/TS2799 -
Itunes doesn't display graphics, only text, has anyone seen this?
Just loaded iTunes 10.5 on Windows...only TEXT is displayed...has anyone seen this?
I have this exact problem, and it occurs on every device I own: iMac, Macbook, iPad, Win 7. The explanation for the issue is that the stylesheet isn't coming over (.CSS).
Because it occurs on every device in my house, I'm assuming there's something in my wireless router configuration that's causing it. I haven't found the issue yet, but I'm digging through my modem configuration to see.
go to either http://192.168.0.1 or http://192.168.1.1
That's your modem's IP address. If you can figure out what's in the configuration that's causing it, please post back. -
What does this mean? Has anyone seen before?
Most e-mail servers impose limits on how many messages you can send per day and how many different e-mail addresses you can send messages to per day. This is a measure to prevent spam, and you're unlikely to hit those limits unless you're sending messages to a very large group of people. Generally, those limits are somewhere in the hundreds.
If you haven't been sending that much e-mail, or to that many recipients, then your e-mail account may have been hacked and used to send spam. See:
Someone is sending messages from my e-mail address! -
Has anyone seen this display problem?
I even changed my video card and still had the same issue? has anyone seen this or know how to fix this issue?
I tried to show a screen capture but didnt have any luck but the issue is alot of my icons are showing pink lines on them and when in certain application and safari the pictures are showing up all pixelated with pink and green pixels instead of displaying the correct image? is it possible the AGP slot is bad? i just upgraded to 10.5.8 hoping to correct the problem but no luck. Also this is a Power PC 1.8 ghz.
Thank YouI wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
Anyhow... Mr. Ah
The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
Post back and say what the situation is, especially if you just recently updated to 10.5.5.
And post back with what kind of G5 you have, look in the "About this Mac" window.
Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again. -
Has anyone seen evidence of corrections being made to Maps?
If it was just you, then it would be understandable because Apple might be swamped with requests to correct their Maps app and they might be attending to other users' requests first.
That scenario would be awesome, because it would mean that there are corrections being made, even if they are not yours. But there is a problem. Everybody I've asked hasn't seen ANY corrections done. I hope this is not true.
So.... the question is: Can we find evidence of any corrections at all? Even one correction?
When we look at the millions... MILLIONS of user correction requests, has anyone seen a SINGLE correction done out of MILLIONS of requests. Because ZERO out of MILLIONS of requests would be very bad.
I want the Maps app to improve. I'm cheering Apple and supporting Apple. If the Maps app improves, then I would be happy and Apple users would be happy. The question is: has anyone seen any corrections??
I'm hoping there are many examples out there of people seeing corrections.Hello,
mybe one of the following Notes can help you:
http://service.sap.com/sap/support/notes/1654940
http://service.sap.com/sap/support/notes/1390097
Regards
-Seb. -
Has anyone seen this behaviour of AccessHW In Port?
Yesterday I was trying to check the operation of a plug-in PCMCIA parallel port, specifically I wanted to know if there were any timing issues with this device on an XP machine, so I thought I would try the AccessHW In and Out functions in Labview. I installed an old copy of Labview 6.1 (It was 5:50PM and I wanted to do this fast!) and tried it.
Reading the memory location where the device's status port was supposed to be just returned zero. Strange, I thought, so I tried some other addresses in the I/O range. I got zero from every single one. I tried the same on my own laptop, which is also XP, and I was getting sensible numbers from addresses in I/O space.
Has anyone seen this behaviour? The machine has McAffee on-access protection running, which cannot be disabled (company IT policy), and I have a suspicion that this might be blocking accesses to low memory, is this possible?Sorry... my mind is not working well this morning You had mentionned that in your original post and the fact that it is a PCMCIA parallel port.
As for the address location, I have seen addresses in the 0x2000 region for add-on parallel ports (not PCMCIA).
I haven't used a PMCIA device with Win-XP. Does the address info for that port appear under properties when you look at the HW devices within the Control Panel's System. From what I can recall, you can change the PCMCIA serial port number within the HW device, so maybe the properties will list the address..
Have you checked this?
RayR.
Message Edited by JoeLabView on 07-02-2008 11:20 AM -
Has anyone seen this MacBook Pro 15" 2008 problem before?
Hi. My MacBook Pro has developed a fault whereby a horizontal line appears on the screen, the mac freezes then a host of vertical lines gradually appear on the screen until it is obscured. Something similar happened in May last year and Apple charged me over £300 to repair it, replacing the 'mother board'.
I have so far taken it into the Apple shop twice in the last week (a two hour round trip). Both times they have opened it, cleaned it and declared it fixed. This time it lasted about an hour before happening again, although this time at least I've been able to restart it.
Has anyone seen this before, or have any advice about how best to proceed?
I have put a video of the symptoms here:
20120915 135612 - YouTube
Thanks for reading. This is my first post so apologies if I've rambled a bit!
Steve
MacBook Pro 15", late 2008.I wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
Anyhow... Mr. Ah
The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
Post back and say what the situation is, especially if you just recently updated to 10.5.5.
And post back with what kind of G5 you have, look in the "About this Mac" window.
Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again.
Maybe you are looking for
-
Zen V Plus - Software Installat
Hello?I bought a new ZEN V Plus Gb and installed the CD programs?on a PC with Windows XP, having no problems.Now a bought a new PC, with Windows XP Media Center 2002 and tried to install the CD programs. Tried this three times and every time the foll
-
I need to insall a plug in for STN files. Can this be done?
-
where does os x 10.4.6 keep the php.ini (configuration) file for it's preinstalled php api?
-
Problem in activating enhancement spot in se18
HI, I create an enhancement spot using se18 in development server ,after save when I am going to activate it system is giving a message ' This action is not supported in system DEV'. what to do? Regards JP
-
Why is my iPhone not recognized by iTunes?
Anyone have a clue as to why my iPhone 4S is not being recognized by iTunes. I've re-started the computer and phone and still nothing. Suggestions welcome.