Has anyone still got cs3 extended (academic version)

A request, My diskCS3 was stolen and adobe cannot supply a replacement,even the alternative zip file they sugested didn't work.
I can't afford to upgrade to CS4 so I don't know if this is the right place to be making this request,I'm new to all this.hope someone has it.Thanks,Terry.Cardiff.

Old or Used Software http://www.emsps.com/oldtools/ Or http://www.retrosoftware.com/

Similar Messages

Has anyone actually got the Green Screen feature to work?

Has anyone actually got the Green Screen feature to work? I've been trying for about 8 hours, absolutely no success. I have followed the iMovie Help instructions and the examples on the internet, over and over again. I've tried every imaginable variation on the instructions. Nothing from my green movie shows up. The green in my video is pure green - 100% green, 0% red and 0% blue. Yet the non-green images in the video aren't getting displayed at all. Several other people have mentioned a similar problem on these forums and they are all "unanswered". Is that because this is an unsolvable problem? Is it an iMovie bug? Sigh. I'm a big fan of Apple but stuff like this gives them a bad name.

After several more hours of diagnosis I have identified some conditions which can make Green Screen slightly work (but not much). The condition is as follows. The green screen clip must be carefully dropped at the beginning of a video clip, such that at least the first two seconds of the green screen clip (no less, but no more or the clip will become attached to the previous clip and then it's broken again) are displayed over the PREVIOUS video clip. But the green screen will not work on the previous clip, only on the second clip. So you will always lose the first two seconds of the green screen video. It took me a lot of experimenting to discover this anomaly.
Clearly this is a bug, but since not all users on the internet experience this bug, (some online videos shows that Green Screen actually works as advertised) it's most likely related to the video card driver. My video card is an ATI 4870. If you have such a card, there's probably no hope that you can get this feature to work unless Apple fixes the driver or possibly the iMovie application, or you use my tricky workaround.

Has anyone successfully got a refund on graphics card fault

My Mac Mini (mid 2011) purchases in February 2012 has died. The graphics chip has gone and the display is some funky colours at boot before it crashes and reboots. I'm unable to login at all, even via safe mode.
It's almost 3 years old to the day and i'm covered by UK law for 6 years. But has anyone successfully got a refund or replacement?
I'm concerned they might want to take it in to test and try to repair it, but presumably that would mean an entirely new motherboard and i can't be without a Mac (my main computer) for so long. Do they even make / have in stock Mid 2011 Mac Minis anyway? I'd guess not.
Should i go ahead and buy a new one with the reassurance i'd get some money back?
I've made no alterations to the mac other than to upgrade the ram from 4GB to 8GB.
thanks

Apple never mad a promise to replace the Mac. Only to fix your OR replace at Apple's option.
Contact Apple and discuss it with them
you can also
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

N80 & HOME MEDIA SERVER, HAS ANYONE ACTUALLY GOT I...

Has anyone actually got their N80 to connect to thier pc's using the Simple server home media server software, if so what firmware have you got on your phone and what access point / wireless router are you using ?.
My N8- connects to my network just fine and can browse the internet just fine too, and I can also query my N80 using a upnp test program and it shows up just fine using that so it shows the upnp is not getting blocked by anything, but some some reason it just will not show up in the Pc software and when you try to connect to the pc with the N80 all you get is searching for devices..........
When I quey the phone with the test program I get :
Description: Multimedia Device
DeviceType: urn:schemas-upnp-org:device:MediaServer:1
FriendlyName: N80
Manufacturer: Nokia
ManufacturerUrl: http://www.nokia.com/
ModelName: Nokia N80
ModelNumber:
ModelURL: http://www.nseries.com/
PresentationUrl:
SerialNumber:
UDN: uuid:f0086e4c-f219-10e0-ae0f-0016BC7B14C
UPC:
So it seems to be working......

its late and i have not read your post in full (too bad).
if you've got the server installed (plus UPnP enabled on your router) you should see your phone. if the server can see it you will see a large picture of the N80 there, check the tabs. if you can't do anything with it (like i experienced initially), make sure you got into your actual phones home network sharing settings. i have to share the phones contents each time i use the sever. this finally makes the server see the phones contents as it displays additional tabs once properly connected (i.e. copy to device, copy from device).
give that a go.

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

HT1725 I am having trouble down loading a uv digital copy of a movie that i recently purchased. I keep getting error code (-50) has anyone else got this and how do you resolve it?

I am having trouble down loading a uv digital copy of a movie that i recently purchased. I keep getting error code (-50) has anyone else got this and how do you resolve it?

Hi,
Try the following steps:
1. Check windows updates.
2. Try the Microsoft Fix it in this kb to remove previous install completely:
http://support.microsoft.com/kb/2739501/en-us
3. Reboot.
4. Try installing again.
This seems helpful on the issue.
As always, thank you for your suggestion, Don:)
Regards,
Melon Chen
TechNet Community Support

Has anyone else got charged stupid amounts of money for not even purchasing anything or just me?

Has anyone else got charged stupid amounts of money for not even purchasing anything or just me?

Does anything show on your purchase history : http://support.apple.com/kb/HT2727 ?
And did you have any auto-renewing subscriptions that were due : http://support.apple.com/kb/HT4098 ?
If you can't find what the charges are for, or you don't recognise them (and nobody has access to your account or devices and may have made them), then try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Has anyone ever got the message error occurred while converting the file - you do not have the privilege to make changes - when importing cps?

Has anyone ever got the message error occurred while converting the file - you do not have the privilege to make changes - when importing cds?

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

Has anyone actually tried to upgrade Academic to 2.0?

I realize that you are not suppose to be able to do this but I was wondering if anyone has actually tried to perform the upgarde from Academic 1.0 or 1.5 to 2.0?

I bought Educational v1 in Australia from the Apple store (Was an OTEN student at the time), and I upgraded last week to v2 no problems.
But... Although I only paid the educational price for v1, the box and serial stickers all say "Aperture 1.0 retail".
I'm thinking that in Australia at least, the educational/academic version is just the retail version sold at a discount. Maybe the market's not big enough here to justify stocking 2 versions of the same product.

Has Anyone Else Got A "Non-Controllable Device" Easy Setup In FCE 4 ?

Well has anyone got a PAL "Non-Controllable Device" Easy Setup in FCE 4 ?
I am completely confused as over the past few months I have been fiddling with FCP and FCE.
I am sure I created this Easy Setup in FCP 6 and saved it to default position of HD>Library>Application Support>FCP System Support>Custom Settings.
Strangely it has appeared in FCE 4 ......... I'm sure it is mine because it has the wording, "... capturing via A/D Converter", which I am sure is my phrasing and not Apple's.
Other FCP Easy Setups I have made have not appeared in FCE - just this one.
Now here's something stranger ........ I have deleted the file from the Custom Settings folder but it still appears in both FCE and FCP !
Below are a couple of screenshots from FCE 4 :-
Can anyone explain this weird behaviour please ?

Ian, heres my take on the way it works ...
When FCP/FCE loads up then any Custom Settings are loaded (and held in memory along with everything else) ... when you quit, those settings are written to the prefs file. From that point on they are there for good ie you can trash the Custom Setting but it will still be loaded from the prefs file at launch. Only when you delete the prefs file will the setting go (along with everything else). I'd file it under bug.
By the way, this is not new, its been like this since forever.
Cheers
Andy

Has anyone actually got one these to work

I'm not be flip.
I bought an Airport Extreme Base Station and it works like a charm. But I can not even get through the utility to get the Express to work.
At first it would go to the end and then I'd get a message saying an error had occured and the Express could not be found. I'd reset it.
After two or three times of this nonsense the unit disappeared for good. Resetting it does no good -- my Mac simply can't find it.
I bought an Express when they first came out and could not get it to work -- even after hours on the phone with Apple.
But here we are two or three years later and the units still don't work.
Honestly, has anyone ever gotten one of these to work?

Well, you can close this thread. Apple can't help and the product just doesn't work.
Connecting to the Express kills all Internet access forcing me to reboot. The, once rebooted I can no longer connect to the Express.
After all these years you would have thought they would have gotten this right.
For God's sake take this lousy product off the market.

Since upgrade to ios7 music played thru my Bose has been to say the least hazy it's fine thru phone but the pad has the problem has anyone else got same problem ?

Since upgrade to iOS 7 playing my music from iPad via Bose has been to say the 'least' hazy,not got same problem with phone,has anyone out there come across same problem

The sound on my iPad was pretty bad for Siri after upgrading to iOS 7. I ended up restoring to factory settings which did the trick, but is a big step, especially if you've lots of content on your iPad.
However it may be worth trying a basic Reset where data remains as is. To do that hold down both the Sleep & Home buttons together until the Apple logo is displayed on screen.
Regards,
Steve

Has anyone ever got versioning to work??

Hi everyone,
I've spent the last good while trying to get the versioning download protocol to work so that only the changed files are downloaded using a jardiff. I've seen these messages before on this forum and I have never found a successfull answer. Rather than first off posting the contents of my entire version.xml file, jnlp file etc, I would REALLY appreciate it if anyone could tell me if they have actually got this to work.
thanks very much for any help on this at all.
Brian

ScheduleWorld.com uses this and it works perfectly.
There are bugs related to foreign characters and the versioning servlet will bomb because of this. It's 100% reproducable, and I logged a bug but I never heard back from Sun (maybe 3 months ago).

Has anyone opted for an extended warranty/service plan for their Z

Anyone purchase one of these contracts? Seems like most of the major online retailers offer one for the ZVM. I have an order in with Crutchfield for the unit and am considering their extended service plan.

The 1294 system has a standard 3 year on-site warranty, the following are the options available;
The problem for you may be that the accidental damage cover needs to be puchased, I believe, within 90 days of purchasing the system. As you purchased an "open box" system I'm not sure if this is still possible, at best ask the shop where you purchased it; if they had purchased it as a demo-system it should be possible for you to purchase both.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Has anyone actually got a Captivate 6 quiz (pref. HTML5) working in Moodle X.X ?

Thats wbout it really.
The way that C6 punlishes to a gazillion folders rather makes the process difficult (and I do not want to create Moodle Quizzes and export via Scorm as there is n point in that - I want to create HTML5 quizzes within the topics pages of Moodle.
If anyone has - or is willin to try - theh I will be amazed franklt :-)
John

My best guess here as to the reason for your issue is that you've removed some of the essential objects from the Quiz Slides and that is fouling things up.
Quiz Slides MUST ALWAYS have the default Question Title and Question Text captions present. These are special caption objects that are ONLY found on quiz question slides. If you remove them or replace them with normal captions your quiz slides will malfunction inconsistently.
The other thing you may have done here by the sound of it is to set Submit All and then move the Submit All button off the slide into the scrap area. That's also likely to screw things up. If you do NOT want the user to see the Submit All button until the final quiz question slide then just change them to Transparent buttons and move them ALMOST off stage, but leave at least a few pixels of the button object still sitting over the top of the stage area. This will mean the user cannot see (and is very unlikely to click) the Submit All button except for the slide where you WANT them to see it.

Has anyone still got cs3 extended (academic version)

Similar Messages

Maybe you are looking for