Has anyone successfully printed on Konica Minolta Magicolor 2530DL on Mac OS X 10.9

Has anyone successfully printed on the Konica Minolta Magicolor 2530DL after upgrading to Mac OS X 10.9?
Also has anyone successfully printed on the Epson EPL-5700i after upgrading to Mac OS X 10.9?

I realize that most people tend to visit the forums to report problems rather than visit the forums to report successes after an upgrade. And I appreciate John Blanchard1's taking the time to reply to my posting.
Dakoda mentions problems printing to a Konica Minolta C280 and the thread that John Blanchard1 posted refers to problems printing to both Konica Minolta BizHubs (C652 & 501).
However, the existence of these problems with other KM printer models does not let me know if anyone has been successful printing to the Konica Minolta Magicolor 2530DL after upgrading to Mac OS X 10.9 or even if anyone has had a problem with printing to the 2530DL after upgrading to 10.9.
On October 28, 2013, a Konica Minolta technical support agent told me -- after checking with his supervisor -- that regarding the Konica Minolta Magicolor 2530DL that they will not be upgrading the 2530DL printer driver. In fact they have not upgraded the driver since 10.6. I learned on their support site that the 10.6 driver has continued to work with 10.7 and 10.8. They have not yet updated their support site for compatibility of their line of printers with 10.9.
So I would like to find evidence that this printer has continued to work for someone after the upgrade to 10.9 rather than upgrade and then have to downgrade to still be able to use this printer.

Similar Messages

Konica Minolta Magicolor 2530DL Laser no longer working with 10.4.10

Hey all. I have a Minolta 2530DL laser printer that I previously had up and running via my network, using 10.4.9 and it worked fine. But ever since I updated to 10.4.10, the printer is no longer seen by my Mac. I installed the driver found here:
http://printer.konicaminolta.com/support/currentprinters/mc2530dlsup.htm#osx
And nothing I've read indicates that it shouldn't work. I've uninstalled the driver, reinstalled it, tried my USB cable, ethernet, etc. Nothing works. I even went so far as to return the printer for another, and the new one does the exact same thing! So, it has to be my OS.
The printer isn't seen in System Profile under any configuration. The printer starts up just fine, but never goes online and into Ready status. As I said, It worked perfectly before.
I'm at a loss as to what to do, so any advice would be appreciated!
Thanks,
Jason

Called Minolta and the tech was really quick to blame "bad power" for zapping the brains of the printer. He said that they would send me another one, and to ship the old one back. So, in taking the printer apart, I removed the extra mem that I added to it (256MB PC133), and thought "hmmm.. I'm going to try this without the memory stick to see if it works", and it DID! So, the problem was bad memory!!! At one point, this memory worked just fine with the printer, but musta just went bad. So, i'm going to order a fresh new stick and be done with it.
Too bad that I wasted at least six hours of my life troubleshooting this thing! Thank goodness I didn't reinstall my OS, which was going to be the next step!
Thanks for your help Jason, you're a real life saver!
Love,
Jason

Konica Minolta Magicolor

I did not see these on the list: Does anyone know whether the Konica Minolta Magicolor 2430DL printer is compatible with Airport Express? Same question for the Konica Minolta Magicolor 2550 DN. Thanks.

wambo0402 wrote:
the installation went fine but in the Systemproperties I only see the printing function for the device. The second button for scanning isn't there.
You will only get the Scan button if KM supplied an ICA driver. If their driver is TWAIN-based, then you will need to use an application like Adobe Acrobat Standard or Pro to scan with. Or KM may have their own scanning application.
If the scanner driver is ICA based, then try opening Image Capture. If the KM is networked, it will appear under the heading of Shared and selecting it will either work or you will get an error about the lack of driver, thus confirming that the scanner driver is not ICA-based.

Has anyone successfully set up scan to smb to mac os 10.7.x from a Konica Minolta bizhub

Has anyone successfully set up scan to smb to mac os 10.7.x from a Konica Minolta bizhub. I'm using 10.7.3 on MacBook Pro. Don't care what model bizhub is being used as I have access to many. I've seen the posts for FTP workarounds but want to use SMB if that is an option. Any suggestions? Thank you!

petermtnbk wrote:
I've read other discussions that have suggested changing the format of the username and password when having login problems. I'm not familiar with NT-Status Codes. Could changing the format of the username make any difference? Something like... "workgroup/username" or "username@domain" or "domain/username" or some other combination of workgroup, domain, username, computername.
The issue has nothing to do with the format of the user authentication. What you are reading is about the Lion Mac connecting to a Windows computer that is part of domain or workgroup. The method changed slightly compared to Snow Leopard.
KM does support FTP so that is still an option, but I would ideally would like to set up SMB scanning. I'm not sure if KM is going to support AFP anytime soon.
With the lack of SMB support and KM offering no alternative at this stage then I suggest you look at using FTP. While Lion removed the option to enable FTP via the Sharing pane in System Preferences, it can still be enabled via Terminal using the following command
sudo -s launchctl load -w /System/Library/LaunchDaemons/ftp.plist
You will be prompted to authenticate using your Mac's admin account & password. Once this is done, you can then configure the address on the copier to push scan using FTP. The keys are;
The host name requires just the IP address. No leading slashes like SMB
The path will be the folder that you want to scan to, also entered without a leading slash. For example, Desktop
The user name will be the short name of the account who's folder you want to scan to.
The only other option may be WebDAV if the KM supports it. We have this with our imageRUNNER ADVANCE and with a document scanned to a shared folder in the copier hard drive, we can then connect to that folder by using Finder's > Go > Connect to Server facility. You then just enter
http://ipaddress/share
which connects you to the shared folder and lets you see the document you scanned. You also have the facility to set subfolders for security of users documents.

Konica Minolta magicolor 7450 Unable to print to Custom paper sizes

Hi
I have a Konica Minolta magicolor 7450 laser printer that (since switching to mac from windows) is unable to print to Custom paper sizes (entered in the print dialog box from within photoshop CS3) and nothing will print from illustrator CS3 at all.
I have OS 10.5.2 with the 10.1 photoshop update, and the 13.0.2 illustrator update.
When I use to use windows xp & photoshop CS2 I didn't seem to have trouble with this function, but since jumping over to mac & CS3, I can't print on any paperstock other than the defult sizes listed (which it dose perfectly) - I've re downloaded & installed the printers driver, downloaded & installed a firmware update for the printer and tried printing with a network cable & usb cable - all with no luck. I've also tried entering in the custom paper size in the printers LCD panel & setting in as default but it still wants to print on A4 or A3 paper...
Any ideas out there would be appreciated!

so I've been pulling my hair out for 2 days & nights now trying to figure out why I couldnt print on custom paper sizes - I've just now hit the "help" icon in the print dialog box and found this:
"Creating a custom page size
If you want to print on unusual size paper, such as an odd-size envelope or card, you may be able choose the paper’s size from the Paper Size pop-up menu. To find the Paper Size pop-up menu, choose File > Page Setup, if available. Otherwise, choose File > Print.
If you can’t find the size you need, you can create your own custom paper size.
To create a custom page size:
Open the document you want to print.
Choose File > Page Setup, if it’s available. Choose Page Attributes from the Settings pop-up menu, and then choose Any Printer from the Format For pop-up menu.
Choosing Any Printer ensures that your document can print on any printer that supports the paper size you select.
If Page Setup is not available, choose File > Print.
If the Print dialog contains only two pop-up menus and some buttons across the bottom, click the disclosure triangle beside the Printer pop-up menu.
Choose Manage Custom Sizes from the Paper Size pop-up menu.
Click the Add button.
Type a name for the paper size.
Enter values in the Paper Size and Printer Margins field."
All I had to change was the "any printer" setting from my (konica minolta) printers name to "Any Printer"!! now my custom paper sizes are printing fine and dandy!! phew!!!!!!!!

Can't install scanner driver for Konica Minolta magicolor 1690mf

I've successfully installed the printer driver for my Konica Minolta 1690MF multi-function printer/scanner/fax.
However, when I go to try an install the scanner driver, the following error appears:
"mc1690MF Scanner can’t be installed on this computer.
The operation system is not adequate for running magicolor 1690MF."
I am running 10.6.1.
I downloaded the drivers from the konica minolta website, and it claims the drivers are compliant up to 10.5 (http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=1167 )
Is there any way to get a scanner driver that is compliant for the snow leopard OS? Is there an alternative to waiting for the manufacturer to update their drivers?

I am having the same problem. I was able to scan last week and suddenly this week image capture cannot find the scanner. The Konica Minolta Magicolor 1690mf prints fine but scanning is not functioning. I looking at drivesr on Konica Minolta's site but there were none for os 10.6.1. I called them in and they could not suggest anything other than reloading the printer. They could not tell me if this was a known problem. The person I spoke with says that with apple making the updates it might be a couple of months before they have a driver for it..... how frustrating I can't use the scanner for a couple of months??? Any suggestions out there?

I am trying to connect my macbook pro to a konica minolta magicolor 1690MF

I am trying to connect my macbook pro to a konica minolta magicolor 1690MF printer/scanner. I tried to download drive software from the konica website, but I still can't add the printer to my system.

Depends on your model TV. Read your TV user manual. The newer models have "how to hookup" instructions for computer & games.
You can also do a forum search as well as a Google search.

Konica Minolta Magicolor 2300DL Drivers

I hope to someday to buy a Mac Mini and would like to know if there are drivers for the Konica Minolta Magicolor 2300DL.
I was at a Mac Store today and asked one of the employees if there are drivers for the Magicolor 2300DL on a Mac Mini and he went to Konica Minolta's Webpage and did a search for Magicolor 2300DL Mac Drivers and there the drivers were for Windows Mac and even Linux.
When I got home I went to http://kmbs.konicaminolta.us/ and could not find any Mac Drivers, all they had were Vista and below, not even Windows 7 drivers.
Where can I get MAC drivers for the Magicolor 2300DL for what ever the latests version of Mac OS is?
Thanks.

Try this > http://printer.konicaminolta.net/drivers/mac/2430dlppc.dmg
Configure the protocol as HP Jetdirect.

Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive?

Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive? Apple support tech tried to tell me it wasn't possible and that the only NAS Time Machine could back up to is the Time Capsule, but I'm not buying it. I know it's doable, but I'm having a hard time figuring out which External HDDs will work and which ones won't. If not My Book for Mac, is there an External HDD that will work? (Running OS X 10.9.1 - Mavericks, btw...)

Given the nature of backups, my recommendation has always been to use a strategy that is unequivocally supported by Apple. As you already determined Apple Support unequivocally informed you that your proposal will not work, unless your router is an Apple AirPort Extreme or Time Capsule.
The exhaustive list of devices supported by Time Machine amounts to the following:
AirPort Time Capsule's built-in hard disk (any model)
External USB hard disk drive connected to a Time Capsule (any model)
External USB hard disk drive connected to an AirPort Extreme (current model only)
A hard disk drive directly connected to your Mac
That is all.
Use whatever backup device you want, but you should be aware that this site is full of reports of misery from hapless individuals who had been using NAS devices for Time Machine backups, only to find that they were incomplete, corrupted, or useless when they were required. Apple won't care if you lose your data while using a Time Machine configuration specifically excluded from their technical support documents.

Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi? If so, please describe the requirements and process. Thanks.

Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi? If so, please describe the requirements and process. (TV subscription is through DirecTV and ISP is TWC.) Thanks.

If you wish to use the cellular capabilities of a device, you will need a SIM (unless the carrier uses CDMA which doesn't use SIMs) and you will have to pay a cell carrier. No cell company provides service for free. The only way you will get free Internet is via WiFi to a free and open WiFi access point, as sometimes is offered in public buildings or by some businesses.
Regards.

Has anyone successfully transferred contacts from a Blackberry to an iPhone?

Has anyone successfully transferred contact info from a Blackberry to an iPhone?

Hi Friend,
If it's possible to export contacts from Blackberry to the SIM card, then you can place that SIM card into iPhone and import them to iPhone (settings>>mail,contacts,calendars>>import contacts from the SIM Card.
Hope it helps

Has anyone successfully got a refund on graphics card fault

My Mac Mini (mid 2011) purchases in February 2012 has died. The graphics chip has gone and the display is some funky colours at boot before it crashes and reboots. I'm unable to login at all, even via safe mode.
It's almost 3 years old to the day and i'm covered by UK law for 6 years. But has anyone successfully got a refund or replacement?
I'm concerned they might want to take it in to test and try to repair it, but presumably that would mean an entirely new motherboard and i can't be without a Mac (my main computer) for so long. Do they even make / have in stock Mid 2011 Mac Minis anyway? I'd guess not.
Should i go ahead and buy a new one with the reassurance i'd get some money back?
I've made no alterations to the mac other than to upgrade the ram from 4GB to 8GB.
thanks

Apple never mad a promise to replace the Mac. Only to fix your OR replace at Apple's option.
Contact Apple and discuss it with them
you can also
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Has anyone successfully been approved for a Paid Books account?

I submit my completed application for a Paid Books account over 7 business days ago, and I've yet to hear so much as a confirmation of its reciept yet. Judging by the existing conversations in this forum, this is not unusal, it seems.
Thus, my questions is this: has anyone successfully been approved for a Paid Books account? One success story would be enough to inspire some hope while the nail-biting waiting for a response continues.

It took a while to get approved and when I submitted the iBook, it took a while to have the book approved. But today it was approved. They approved the sample and the paid ibook at the same time (eReading: The Best Thing). I submitted them on the same day. It was indeed a nailbiting affair

Has anyone successfully managed to get VZW to raplace Fascinate with a different phone?

Has anyone successfully managed to get VZW to raplace Fascinate with a different phone?
If so, could you share with me on how you convinced VZW to do it?(which department?)
I love my Fascinate, but not when it can't get calls. I would prefer to have a Fascinate with
zero problems, but that appears unlikely. So I guess my best option is to get a different
phone(Samsung, Motorola, or others)
Thanks!

I successfully got a swap out of my Fascinate with a Droid Incredible 2.
I private messaged VZW agents on these forums the following message and through the course of 3-5 days I successfully was granted an expception and allowed to swap out my device (with no contract extension or upgrade eligiblity extenstion). This was after several phone calls and numberous wasted hours trying to convince them the Fascinate was not a good phone.
If I have been rude in any way during this message, I sincerely apologize, I did not mean it. I am a frsutrated owner of a bad piece of electronics. I am aware it is not VZW's fault, but I think you need to stand beind the phones you sell and rectify situations that are bad.
I am a Samsung Fascinate owner and to say the least this phone has been the biggest source of frustration I have ever had to endur in the 20+ years I have owned a cellular phone.
The have been number rous issues with my original phone and the replacement (certified replacement) phone I have gotten. These issues include, but are not limited to:
1. glitchy UI
2. constant forecloses and freezes
3 auto reboots
4. inoperable phone for 20 - 30 minutes at a time. Can't access apps, can't make calls, can't send texts, phone is useless to me.
5. not receiving calls/texts
6. missing voicemails
7. increased battery drain
8. random flickering of screen lights while using the phone.
Now I have performed the following steps at the suggestion of VZW tech support on both my orginal phone an replacement phone
1. Hard resets, factory resets
2. Soft resets,
3. Clear cache on the phone
4. Removing apps
5. Updating roaming capabilities
After all these issues and all the suggestion on fixes, the phone still performs poorly and is not a reliable phone at all. Like I stated previously i am beyond frustrated.
I am aware these problems are software issues not a hardware issue; a refurbed Fascinate will not correct them. Hard resets do not fix the problems. I have scoured the message boards on this website (VZW forums) and I am aware the VERIZON is aware of all these issues with multiple Fascinate users.
I am asking to be allowed to swap my Fascinate for another, DIFFERENT model of phone. I am fine if that is a refurb, as long as it is a DIFFERENT model of phone and not a Fascinate. I know this is possible because users on your very own forum are stating it has been done. I am asking it be done in my case
Best thing I can say is stick to it....sitck to you guns and don't back down and don't be allowed to think there is afix when there is not.

Has anyone successfully reset their Skype account ...

I've posted on this before, but none of you good people have shared your thoughts on this. Unfortunately, Skype Customer Service don't appear to have a "standard response" e-mail template to address my problem.
Nine days after I first reported that my Skype account has been hacked I am still going round in circles, with "standard response" e-mails from the Skype Customer Support people asking me to do something which I have already tried but which was not the correct thing to do to reset my Skype Account password.
My Skype Account password has been changed by a hacker.
My Microsoft Account, which is linked to Skype, has not been hacked and the password has been changed (three times in a week ..... see below).
I need to change only my Skype account password but the password reset links take me through to Microsoft and I end up changing my Microsoft account password. This does not resolve the Skype Account Password situation.
Has anyone successfully reset their unknown or forgotten password from a Skype account which has been linked to their Microsoft account?
Does anyone know whether Skype themselves can unlink a Skype Account from a Microsoft Account? Unfortunately I can only do it with the password I do not have!!! I feel that this could be one way of changing my password without being redirected to the Microsft Account Password Reset option.

Well, it's me again. However, I now have a new name on the Community Forum as I have had to re-register as I no longer seem to exist.
I contacted Skype Customer Support via their web chat service and the operator unlinked my Skype Account (which, if you've read any other posts from my original name alison01326) you will recall was hacked and I was unable to make a change to the password as I kept getting through to the Microsoft account password change which was not the password that needed changing.
I would have said, that if you need to unlink the two accounts, just ask. But now I am not so sure. My Skype Account (the one which was hacked, and still has someone else's password on it) has vanished, taking with it £10 of Skype Credit and the World Minutes which I receive monthly as part of Office 365.
I now have five or six different customer service references to quote, and not only can I not get my account verified (as my memory doesn't stretch back to when I first had a Skype account) I also appear to have lost £10 and a valuable "free" service.
Have been in tears over this as 11 days have passed since the hacking and nothing positive has been achieved. Does anyone else have the same experiences, and what was the outcome?

Has anyone successfully printed on Konica Minolta Magicolor 2530DL on Mac OS X 10.9

Similar Messages

Maybe you are looking for