Have CS6 installed on Windows Vista, need to install on new Windows 8 omputer

The disk does not launch the installer. If I manually start the installer, it asks for a serial number. When I input the serial number, it asks for the associated product and CS6 is not shown in the drop-down menu as an option. (CS6 Extended is shown, but not CS6).
How do I get CS6 to install on the new Windows 8 computer?

Hi there,
Welcome to the Community!
It seems that you have bought an upgraded serial number of CS6 and it is asking for a previous version.
Do you have a previous version either from CS5.5 or CS5?
Please contact Adobe support to discuss further options, check it here: http://helpx.adobe.com/contact.html
Thanks!
Ankit

Similar Messages

I recieved error 1328, uninstalled Acrobat, need to download new Acrobat, have CS6 installed, where is the download?

I received error 1328, uninstalled Acrobat, need to download new Acrobat, have CS6 installed, where is the download?
I do not want a trial version, Windows 7 op system.

Hi Mark ,
What flavor of CS6 you want to download ?
Please refer to the following link to select the desired flavor and you can license it by typing in your serial number.
https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Regards
Sukrit Dhingra

I have CS6 installed on Wiindows Vista 64x bit. Everyyhing is fine apart from inaccurate metadata. v

I have CS6 installed on Windows Vista 64x bit. Everything is fine except for some inaccurate metadata. Camera raw v 6.7 is displayed instead of the latest installed ver 7.1. Also lens serial numbers are not shown or are missing. In lens specification f/0 shows up which of course is wrong.
Can anyone shed any light on this?

Just to be sure, try a short procedure...
1. Open a raw file into Camera Raw.
2. From the fly-out menu select Camera Raw Defaults.
3. Convert the image, opening into Photoshop.
4. Check File - File Info. Do you see the problem there?
5. File - Save As a JPEG.
6. Check Properties of the file, ensure it's the one you just saved by looking at the date, and see if you see the problem there.
-Noel

I have CS6 in Dutch, but I need it in English. How can I swap?

I have CS6 in Dutch, but I need it in English. How can I swap?

http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

Why is Firefox is crashing on opening. I have not installed any new plug-ins etc. since last using it successfully. I have attempted to open in safe mode but without success. Crash ID: bp-91282c25-7a56-4137-a436-ac0312111019

I have not installed any new plug-ins etc. since last using it successfully.

Further info
Please follow the instructions in the article from the above post. In fct you have a second suspicious file showing on your report so look specifically at and scan files ''gblrofmx.dll'' & ''sprotector.dll''
If possible I suggest you quarantine the files rather than deleting them immediately. Also note that you may need to start Windows in safe mode (or Windows safemode with network access) in order to find and move or delete the files.
* Use F8 to access Windows safe mode <br /> http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode <br />http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
For forum cross referencing purposes
* Report for CrashID [https://crash-stats.mozilla.com/report/index/27aa708f-12d0-4b17-ac96-0961a2130115 27aa708f-12d0-4b17-ac96-0961a2130115]
** Crash Signature: nsInputStreamPump::OnInputStreamReady(nsIAsyncInputStream*)
** related bug 801394, and contributors thread [https://support.mozilla.org/en-US/forums/contributors/708895 nsInputStreamPump::OnInputStreamReady Crashes (Malware)]
** files without ID ''RocketDock.dll , gblrofmx.dll , sprotector.dll''
* sprotector.dll some suspicions about this being possible malware trojan <br />''Bug 785940 - Firefox startup crash in SECMOD_GetModuleSpecList @ __hash_open with SProtector.dll (Safend Protector, Sophos SafeGuard or TrojanDownloader:HTML/Sprotector.A?) ''<br /> thread [/questions/937251 Firefox crashes]
* gblrofmx.dll likely to be the malware responsible for current crashes

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

I have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

i have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

You'll need to upgrade to Parallels Desktop 7 to regain compatibility. Good luck....
On Edit: A minute late!

I have recently installed the new software on my iphone 4s - Error code 1600

Please does anybody know....
I have just installed the new software update on my iphone 4s soon after it my phone kept turning itself off then it wouldnt come on at all so i connected it to my mac it said my iphone was in recovery mode so needed to install new software.... i waited for 10 mins roughley then at the very end it said cannot install update then it came up with - unknown error code 1600.
Does anyone know if i can fix this from home or do i need to take it into the shop?
Many thanks.

You can use the iPhone version of YouTube or Jasmine
http://itunes.apple.com/sg/app/youtube/id544007664?mt=8
https://itunes.apple.com/sg/app/jasmine-youtube-client/id554937050?mt=8

I have just installed the new OSX Lion. When opening Safari, there is now a very ugly sound. What is it?

I have just installed the new OSX Lion. What is the ugly sound that I hear when I open Safari?

See:
*Firefox > Options/Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
See also:
*https://support.mozilla.org/kb/settings-network-updates-and-encryption#w_general-tab
*http://kb.mozillazine.org/accessibility.blockautorefresh
*http://kb.mozillazine.org/Accessibility_features_of_Firefox
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

I've just smashed my screen of my iPhone can i have it replaced or do i need to buy a new phone?

i've just smashed my screen of my iPhone can i have it replaced or do i need to buy a new phone?

Apple will service your iPhone. If you have AppleCare+ coverage, the cost of service will low; in the US it's $49. If you do not have AppleCare+ on your iPhone, Apple reportedly now will replace the screen in an iPhone 5 for US $149. Availabllity of repair services may vary by country, so call Apple Support or visit an Apple Store and ask for information. If Apple is not currently offering screen replacement service in your country, they will replace the entire iPhone for a flat fee. See the Service Pricing section here:
http://www.apple.com/support/iphone/service/faq/
There are independent iPhone repair services that may be able to do the repair for less than Apple's out-of-warranty charge. Do a web search for "iPhone repair". Note, though, that if you elect to have the iPhone serviced by an unauthorized shop, all further warranty and support from Apple will be voided.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

If I updated my desktop Firefox from version 5 to 6, Does my IDM (Internet Download Manager v.6.07) Plug-in updates automtically or do I have to install a newer version of IDM?

I am worried if my IDM application will not be integrated with the updated version of Firefox 5; Firefox 6.
My question is: Do I have to install a newer version of IDM (Internet Download Manager v.6.07) if I have updated my Firefox?

In Photoshop, if you choose Help - About Plug-in... - Camera Raw, does it say 8.6?
Seems to me there was some hiccup they found in the update process, which prompted this:
Camera Raw updates cannot be applied
I honestly don't know if the problem could apply to 8.6 as well, which is why I asked you to check to make very sure you really got it.
-Noel

Can I install earlier versions after installing latest version?I have 12 installed on new computer but would like to install 8, 10, and 11

Can I install earlier versions after installing latest version? I have 12 installed on new computer but would like to install 8, 10, and 11

This is easily one of the most popular requests on this forum.
Try http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Follow the Very Important Instructions on that page first otherwise the links will not work.

I have just installed the new version of quick time but my Itunes is still telling me that it needs quick time to play the film.

Can anyone help me fix my itunes? I have the new version of quick time but it is now telling me it wont play my films on itunes because it needs quicktime. Iv tried un installing quicktime and re installing it but that hasnt worked. I dont know why it would suddenly stop working, I watched something on it this morning.

Can you check something for me please? I'd like to try doing a "Run as administrator" on your iTunes.
Quit iTunes first.
In Computer, open Local Disk C: or whichever drive you have your program files installed on.
If you have a 32-bit Windows, open the "Program files" folder.
If you have a 64-bit Windows, open the "Program Files (x86)" folder.
Open the "iTunes" folder.
Right-click on the iTunes.exe file and select "run as administrator".
Try playing the movie now. Does it play for you without the message?

D I have to install a new hard drive on my computer in order to upgrade my computer

I have an older IMAC with Mac OSX 10.5.8 installed. I am unable to upgrade my software. Will installing a new hard drive enable me to me up to date?

No. In order to upgrade:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Now, you may need a new hard drive, but not to upgrade the OS unless your drive has no more free space left.

Have CS4 installed on new mac, but can't open any programs. Know Java6

I have CS4 installed on a new mac. It asks me to install JAVA 6. Java 6 is no longer available and in have installed Java 8, but it still asks for Java 6. I paid $1400 for CS4 4 year ago and really only use Acrobat. I don't want to buy it over again. I haven't been able to get support on this problem.

check if others have been successful, http://roaringapps.com/apps:table

Hi i have just installed the new ver of i tunes and it says it cant read whats on my i phone and to restore it to factory settings..please help

hi as above ive just installed the new itunes and it wont read the data on my phone

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Device Not Recognised
For PC > http://support.apple.com/kb/TS1538
For Mac > http://support.apple.com/kb/ts1591

Have CS6 installed on Windows Vista, need to install on new Windows 8 omputer

Similar Messages

Maybe you are looking for