Have just downloaded and installed IO5.....lost all my apps!! and now the ipad only works with a badly lit screen....anyune else come across this one??
Have just downloaded IO5......lost all my apps in the process and now only get a very poorly lit screen. Any ideas out there??
The brightness issue is not something that I've heard of in connection to the update, it may just be a coincidence. Has the brightness level in Settings > Brightness & Wallpaper been turned for some reason ? If not then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear (it won't remove any content that you've got on the iPad, it's the iPad equivalent of a reboot). But it could be a hardware issue so you may need to contact Apple.
In terms of your apps, were they on your computer's iTunes when you did the update ? The iPad backup only contains the content and settings from you apps and not the actual apps, so for the restore to work fully you need your apps on your computer's iTunes. As long as the apps are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free - if you re-download them to your computer you could then try restoring to your backup and see if that restores then and their content.
Similar Messages
-
I went to an Apple store yesterday and the guy there did something and now the ipad only works in the vertical (portrait) position and not the horizontal (landscape) position. How can we make it work in both positions?
Just in case you are not running iOS 7 and don't have the control center feature.....
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it and you are running iOS 5 or 6, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
If you are running iOS 7, swipe up from the bottom of the screen to get to the control center and the lock icon is in the row of icons at the top all the way to the right.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button -
my Atv3 is due for an update and ive tried several times to install it but although it downloads it never finishes installing and tells me that it wasnt possible to update and to try another time. I try every other day and it only inches forward in the progress but it never completes the installation. I was tired of waiting and I decided to keep on trying in a period of time one night until it would finally install, that never happened and Im not sure what is going on but the remote stopped working with the atv3 and when I press a button the box light flashes several times but does nothing, ive disconnected it and left it that way for over 24 hrs, ive disconnected everything (tv, internet etc) and nothing. I cant reset the atv3 through the remote either...i dont know what else to do
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille -
I was going to update my software for the IPad and I connected it to Itunes it synced up and brought up the ipad but didn't have the name, serial number or anything else but a question mark. After being synced and trying to doa software update of about 15-20 mins it suddenly brought up a dialog box and said it couldn't update the ipad until it was restored. I then hit the restore button and after a couple of minutes it didn't do anything and it disconnected me from itunes and now the only thing on the screen is the apple. I can not get it to do anything. I have tried to sync to itunes but nothing. If you push the button on the screen and the top button at the same time it will shut down. Can somebody please help me????
I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
In the terminal (it kept failing to download in Safari):
curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
Quit and relaunch iTunes.
Should now work for you. -
HT5457 I have added this latest download to my iPad and now the iPad will not respond
I have updated my iPad with the latest version iOS 6 download and now my iPad only has the Apple icon displayed. I have attempted to to hold both buttons at the same time and the screen bounces a strange lined gray pic for seconds and bounces back to the Apple icon. any ideas why the iPad will not respond?
I have updated my iPad with the latest version iOS 6 download and now my iPad only has the Apple icon displayed. I have attempted to to hold both buttons at the same time and the screen bounces a strange lined gray pic for seconds and bounces back to the Apple icon. any ideas why the iPad will not respond?
-
I have just downloaded iOS 7.0.2 to my iPhone, but now I am stuck in the icloud agree to terms & conditions, i press agree and nothing happens, it just says confirm, I press agree again and nothing, which means I am locked out! Any ideas
There's a discussion here with several possible solutions to this that you can try: https://discussions.apple.com/thread/5321627?start=0&tstart=0.
-
I have downloaded updates for microsoft office and now the internet wont work - any ideas?
I have downloaded updates for microsoft office and now the internet wont work - any ideas?
If you want to simply do a 'fresh' install (versus wiping out all of your data and doing a 'clean' install) simply boot to your Recovery partition (hold down the Command and R keys whilst booting) and when the Recovery screen appears, elect to freshly install OS X.
Don't know that will solve your problem, though... did you do the 'automatic' update or download the update as a disk image (.dmg)? I wouldn't think that would be causing your problems...
Clinton -
i did the 10s 7 update this morning and now my ipad wont work. I can hear siri tell me all the things i am touching on my screen but it wont unlock and allow me to enter my password. Its as if the screen doesnt work
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
I have updated ITunes and now it does not work
I have updated ITunes and now it does not work. It worked before the update was installed, now it doesn't. I cannot un install it either...
Use this application to uninstall iTunes and all related components
http://support.microsoft.com/mats/program_install_and_uninstall/en-us -
I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows. How do I get back to Mac so I can have a choice of drives?
That doesn't sound good. It sounds like the power outage might have corrupted the partition for OS X. I would suggest booting from the Install DVD that came with your Mac while holding down the C key. Once you have selected the language start up Disk Utility from the pull down menu and repair the disk. Once you have done that then repair permissions also.
Allan -
If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.
1. Why don't you purchase it from Apple? I'd be wary with eBay sellers - and, after all, Apple posts their stuff everywhere, even if you live in a country without a localized Apple store webpage or local (physical) Apple stores.
2. when it comes to adapters / cables like these, NEVER purchase ANYTHING non-Apple-manufactured! Most of the cheap(er) knock-offs don't work! That is, don't try to save on going for a cheaper alternative - it most likely won't work.
Here are the links:
http://store.apple.com/us/product/MD098ZM/A
http://store.apple.com/us/product/MC552ZM/B -
Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
it says unable to conect. btw i have tried shuting down my phone, reseting the phone and reseting the wifi. it works with any other wifi just my home one
hi try to check this
iOS: Recommended settings for Wi-Fi routers and access points -
"I have a 5th generation airpot extreme. All of my wifi devices (iPhone, iPad, macbook) worked fine until the other day when everything but my laptop stopped receiving a wifi signal. I shut down my Mac, unplugged the modem, router, let sit for 10 seconds, started it up and 'presto' everything worked. Then yesterday all but the macbook stopped receiving wifi again. I tried the same scenario as the other day but nothing. I reset the airport extreme to factory settings and still nothing. Is the airport extreme not working?
If it was not working the Mac would not get a signal. Restart the IOS devices and reconnect to the network
-
I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS(Ireally don't remember if it's a 3G or 3GS), iOS 3.1.2. Thanks for your help
please help me!!!
Maybe you are looking for
-
New Spanish Tutorial - Boris Title 3D
howdy, I've added a new Spanish FCP tutorial here . love & peace, victor
-
Preliminary_Posting_Doc_Write Function
Hi, I'm trying to use Preliminary_Posting_Doc_Write Function , to create a Vendor Invoice without a purchase order. the 'Blart' parameter has to be type 'KR', and the account type in the items table has to be 'K' with the tax code 'V1' in MWSKZ. I'm
-
DMS Profile not selecting proper storage category
We have defined two different profiles in DMS with two different security roles with the applications for each profile pointing to different storage categories. If a user has only one of the security roles when they store an original it automaticall
-
TS3367 Change facetime image size on iPad 4
Using FaceTime over wifi how do I obtain full size image of person called and they can view full image on there device iPhone 4 have archived once but don,t know how But now cannot see image only voice So have reverted back to using iPhone 4S to iPho
-
No e-mail notification of BT bill
I pay my bill quarterly and usually receive an e-mail notifying me that the bill is available to view (I have subscribed to paperless billing). This quarter (ending Oct 2013), the bill has appeared on MyBT, but I did not receive a notification e-mail