Have they found a fix to error 1904?
I was just wondering cause i being trying to solved it on my
own and no luck, and if people from macromedia read this a respond
will be nice.
I was just wondering cause i being trying to solved it on my
own and no luck, and if people from macromedia read this a respond
will be nice.
Similar Messages
-
I ask because every time I did call they could not fix the problem, as in I could not send mail, I was told it was my Internet, then they tell me it is my computer. After spending many many hours on the phone with Apple, I was told I had to reload my hard drive. Which by the way takes a lot more then a few hours. The next day I found I still had the same problem. I could not send mail... I found the problem my self// I didn't have a mail box set up to send mail. How sample that was. Then the next time if I wanted to empty trash I had to turn off the computer then reset to do so. When I called tech support she tells me that is normal and they had to do the same thing every time. Well she is wrong in that if you use "empty securely" and not the one that just says empty trash then you do not have to reset or turn off your computer.... So I ask what am I paying $245.00 for? I am sure I will need support at some time, and at least it does give me someone to talk to.
starwalls wrote:
I thank you all for all the replies..
I will be buying the service plan if only for the hardware... I really can not say much about the other support, other then every time I get a female support tech she seems to not know what she is talking about and says that is the way it works... I just keep calling back until I get someone that will know a little to help fix the problem. And yes I hate to say is most likely a male tech.
I do agree apple is NOT what they started out to be... How sad!!! MADE in CHINA very SAD. And here I thought I was buying USA.......
FYI - there has not been a name brand consumer personal computer actually manufactered in the USA in years. Lenovo, Dell, HP, Acer, Apple, Samsung,... - you name it they are ALL made in China or Tiawan. Often many of those brands are being assembled by the same Chinese company in the exact same factory, pulling parts (hard drives, displays, RAM, etc) from the exact same bins. Foxconn for example, which makes iPhones and iPads for Apple, also makes dozens of other makes and models of tablets, ereaders and smart phones for other companies. Like it or not, but the consumer electronic manufactering center of the world is China.
The only consumer computers actually made in the USA these days are by local custom build companies, and it has actually been that way for many years now (I think twinhead may have been one of the last with a plant in the USA - they are still around, now GammaTech, and they still do their "final assembly" in the USA but most of thier manufacturing is done in Tiawan and Malaysia).
By and large, the USA has been out of the actual consumer electronics manufacturing/assembly business for a decade or so now. -
I wonder how many Thunderbird users with poor eyesight who are forced to use Nuance Dragon are finding that it is not compatible with the latest version 13 of Dragon (confirmed without offer of help by Nuance). Versions 12 & 12.5 worked perfectly for dictation and Thunderbird.
The only function of Dragon (but for me with AMD, a major one) which does not work for me in version 13 is that it will not print my dictation, or use any commands associated with dictation. In all other respects, it works normally with commands like "Click Send", "Click File, Click Exit", "Click Write", etc., but simply, no text appears when I dictate. So to use Thunderbird I have two always call up the Dictation Box, which is a nuisance.
Somebody in Nuance must have made a simple mistake when upgrading from version 12.5 to version 13, a mistake which only involves this tiny area in Thunderbird, so I just cannot understand why they cannot check it out and correct it. Previous versions of Dragon where superb with Thunderbird.
When I sent them a complaint, they simply replied saying they were sorry for the inconvenience, but that Dragon version 13 was simply incompatible with Thunderbird. End of story no offer to investigate or help – I just wish there was an alternative company with a similar product, and I would switch instantly! -
All of a sudden out of the blue I get a message that Firefox has crashed. With several options, which pretty much make me start over. Quite frankly I am a bit P's and will remove Firefox from my system and find another more reliable App.
Damn thing crashes about every 40 minutes at best.
Bloody useless.
And yes I've tried disabling the add-ons and updating the plug-ins and every other measure known to man. Still doesn't work. -
Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.
I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??
-
RFBIBL00 error "session name AcctDoc: No terminations have been found"
Can anyone please help me to fix the error I am getting from RFBIBL00 report which is " session name AcctDoc: No terminations have been found". .
Thanks for helping!sloved by myself.
-
Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]
That's an error reported from DVD Player I believe...
kDVDErrorMissingGraphicsDevice = -70017, // A valid graphics device is not available.
There's some conjecture it has to do with HDCP, or Video Card problems, but the only 2 cures/fixes I found were Software related, one was cured by updating the OS, another by replacing the Video kexts.
I think this error also shows up if trying to use DVD player in Safe Mode, (too much research isn't good! ).
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model: GeForce 7800GT
Type: Display
Bus: PCI
Slot: SLOT-1
VRAM (Total): 256 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0092
Revision ID: 0x00a1
ROM Revision: 2152.2
Displays:
VGA Display:
Resolution: 1920 x 1080 @ 60 Hz
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected
Can't think of much to try at the moment, but perhaps reapplying the big 10.4.11 combo, Repair Permissions, & reboot would help, not sure.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html -
I have a water damaged iphone 5c. I was thinking about taking it to the Apple store and paying the 269 dollar service charge for them to attempt to fix it. My question is: If they can't fix it, will they replace my phone for that $269 dollars, or will I have to pay full retail price for a new phone?
They do not repair at all.
The replace.
The $269 is for a replacement. -
Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.This thread is pretty old, are you still having this issue?
-
Do you have any idea, what makes to fix this error in creating PO.
The error is u201CDocument 101600 does not existu201D
Do you have any idea, what makes to fix this error in creating PO.The error is u201CDocument 101600 does not existu201D Here the 101600 is PO no.Hi
Please check in t.code: RZ20 .
You can find out the nature of this error
Regards
G.Ganesh Kumar -
I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.
Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About? -
Have had Itunes on this computer literally for years. This AM message "MSVCR80.dll not found, not installed correctly Error 7 (Windows error 126) "- and could not download (it wanted a mobile device - I don't have one)
Help!Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Has anybody found a fix to "The document could not be printed" and "There were no pages selected to print" error?
I am using a Mac and I'm running the latest versions of OS X 10.6.8 and Adobe 11.0.10 but I'm unable to print. I need REAL HELP not a suggestion or a get around! and NO print as an image doesn't work, nor do I see that as a fix!
Please help!Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
EDIT: I found it and did, but still not working.
Maybe you are looking for
-
Third Party Sales Order, Receiving the Material and Serial Number Status
Hi all- We are starting a process with tracking of serialized product. One of the items we sell is a 3rd party drop ship item. I am having an issue getting the serials to show as a status of ECUS rather that AVAIL when receiving the PO. Anyone have s
-
Adding my Win XP-32-SP device icc/icm color profiles for dropdown PSE 10
In the printer color management I only see choices for color spaces and generic devices. I do not see my printer profiles, some custom, in the list. All are registered properly in Win color management for the the proper devices - display and printers
-
Running Mapinfo professional in Forms 10g
Hi, I am calling the Mapinfo 8.0 application in oracle forms 6i and it working fine, but the same form with Oracle 10G is not displaying the Mapinfo professional. Is there any special configuration to be done to run Mapinfo in 10G. I need a reply as
-
Nested statement "for all entries in"
Hi, is ist possiple to nest "for all entries in" statements ? At the moment I have the following SELECT-Statement: select * from /rtc/tm_inusk appending table gt_zrtc4inusk for all entries in lt_trkorrdesti where trkor
-
Dreamweaver CS3 - trial - won't install
i've read all the other topics in this forum and can't find any resolution for this. got a mac os x... downloaded trial version when i go to run the 'setup' icon for dreamweaver, the icon expands like its about to load the installation but nothing ha