Having a global variable which can be accessed by PCUI application?

Hi there,
Is it possible for us to have global variables that are available to use by the PCUI application during runtime??
Thanks,
Josh

In the standard code SAP creates singleton classes i.e. only one instance of this class is possible. When you ever you try to create same instance is returned.
<P>
Like this you can have all your global variables in this class and can be accessed from other MAC's.
<P
In the class you need to have method GET_INSTANCE  as static method which will return the instance and have CONSTRUCTOR method. You need to make sure that same instance is returned. But i am  not sure what will be the code insidde these methods.
Cheers, Raj

Similar Messages

  • My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset

    My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset. It was working fine until I went to activate it and update the PRL. It turns on, but Freezes on the LG Logo. it currently goes into the LG Download Mode, and When I restore with LG's Mobile Support Tool, It finishes, reboots, and stays at the boot Logo. I was wondering if I can possibly get a replacement phone? This is a little upsetting, as i was hoping to have it transfered from prepaid to postpaid service next month

    Who is your Internet Service Provider...?
    Do you have any computer which is able to go online wirelessly...?
    Have you forwarded any ports on the router...?
    Try to adjust the wireless settings on the router and check...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    Under the Wireless tab,Change the SSIS(Network Name) to some unique name.Change the Channel Width to 20MHz only and Channel to 11,click on save settings.Under the Wireless Security subtab,Change the Security to WEP and type any ten digit number in key1 as the network security key,click on save settings..Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
    Also,for the gaming system,check this link.

  • Any single file in my local folder of RoboHelp 10 which can be copied onto the application server?

    Pleasant Hello Pals, ( This is Vipin Nambiar from Bangalore)
    I am currently evaluating Adobe Robohelp 10 version for one of my technical architecture writing. Requesting help at the very earliest for the below-said big time hurdles.
    I have completed my technical writing for a in-house application system and have generated and viewing the primary layout (courtesy File -> View -> Primary Layout. ) as Contents, Index, Glossary and would like these to be hosted onto the server so that all the users of this application can access these Contents, Index, Glossary and act as a knowhow notes to use this application.
    Is there any single file in my local folder of Adobe RoboHelp 10 which can be copied onto the application server ?
    (My Adobe RoboHelp 10 local folder contains
    a.)Sub-folders called !Language!, !ScreenLayout!, !SkinSubFolder!, !SSL!
    b.)File Types called *.ALI File, *.APJ File, *.Bitmap image, *.BRS File, *.Cascading Style Sheet Document, *.CPD File, *.FPJ File, *.GIF image, *.GLO File, *.H File, *.HHC File, *.HHK File, *.HHP File, *.HTML Document, *.HTT File, *.JPEG image, *.JScript Script File, *.LDB File, *.PPF File, *.PSS File, *.Robohelp HTML Project File, *.SSL File, *.XML Document)
    Any help here will serve me in plentious

    First, your username cannot be changed and it is not a good idea to have email addresses visible on any forum, unless you enjoy reading spam.
    This question is covered in the online help. When you create an output it is generated to whatever folder you specify in the single source layout. Everything that is in that folder needs to go on the server.
    If the help is in !SSL! > WebHelp, then everything in that folder including sub-folders is what needs to go on the server.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Accessing Global variable which is in another script file

    Hi,
    I have 2 scripts as File1.scpt and File2.scpt in desktop. I am in need of having the common global variable 'GG'.
    File1.scpt has only the following code
    *global GG*
    *Set GG to "I am global"*
    File2.scpt has
    +set file1 to (load script file "Macintosh HD:Users:mowri:Desktop:File1.scpt")+
    +display dialog m+ -- not working -- Error message: "The variable m is not defined"
    +display dialog m+ of file1 - not working -- Error message: "Can't make m into type string"
    It will be great help if you can clarify about my mistakes in this?
    Regards
    Mowri

    Another solution, shorter than the previous one:
    File1.scpt
    set GG to "I am global"
    File2.scpt
    set file1 to (load script file "Macintosh HD:Users:mowri:Desktop:File1.scpt")
    run file1
    display dialog GG
    Ref.: [Handlers in Script Applications - run Handlers|http://developer.apple.com/mac/library/documentation/AppleScript/Conce ptual/AppleScriptLangGuide/conceptual/ASLRabout_handlers.html#//appleref/doc/uid/TP40000983-CH206-SW14]
    Message was edited by: Pierre L.

  • Where can I find a list of variables which can be used in Firefox preferences?

    Where can I find a list of variables (e.g. %LOCALE%, %VERSION%, %SUBSCRIPTION%) and their definitions which can be used in Firefox preferences?

    %LOCALE% comes from his pref: general.useragent.locale
    Fore some others see:
    * https://developer.mozilla.org/en/XPCOM_Interface_Reference/nsIXULAppInfo
    *https://developer.mozilla.org/en/XPCOM_Interface_Reference/nsIXULRuntime
    An example can be seen here in getUpdateURL()
    *resource:///components/nsUpdateService.js

  • Can't access any Apex application

    I don't have access to any Apex application. SQL Workshop and Utilities on the same database work fine, but application builder doesn't work (gives time-outs with message: page could not be found). I can see all the pages of the different applications in SQL Developer. I can also make a new application with the wizard, but after the application has been created, I can't run or access it (also time-outs).
    What could be the problem here? In last instance, I could ask the system admin to restart the db service, but this is the last option. Is there someting else I could try? I don't have full access to the DB in question, and the DB admin has a day off today. So any help would be welcome.

    I cannot create a page in an existing app, because apex simply doesn't open existing apps. I can, however, create an app with the wizard, which actually creates the app too, but I can't access or edit it afterwards.
    Anyway, i did consult the sysadmin, and there's something wrong with the server itself, according to him. The machine will be rebooted. Hope this helps.

  • Can't access Tools/Options/Applications in FF 12.0

    Every time I try to do the following in FF 12.0, the browser stops responding/hangs/freezes/basically says "sorry, dude:"
    1. Download files either by right clicking and choosing "save" or clicking directly on it. This includes email attachments, videos, etc. I also cannot attach files to emails since the same thing happens the moment I hit "Browse."
    2. Cannot access Tools/Options/Applications, usually getting the same results. In my various attempts to resolve this, I have been able to open that window, but the space where file associations are listed is empty.
    If it's any help, when I've reverted back to FF 3.5.1.9, I can do all those things ... I just can't get "Words With Friends" to load in Facebook.
    What I have done in an attempt to correct this issue:
    1.) Everything, including deleting the various .rdf files, etc.
    2.) Tried starting in safe mode, using every possible variation.
    3.) Uninstalled and reinstalled Firefox around a hundred times, removing personal settings and cleaning the registry each time.
    4.) Uninstalled and reinstalled Flash and Java three or four times each.
    5.) Everything.
    I am at my wit's end, thus the request for help. Unfortunately, if someone offers a solution, I've probably tried it.
    Additional information: I did use firetune once, returned to the backup configuration I created, used it again and returned to the backup again. This seems to be right around the time the problems began, but I'm not positive.
    Any assistance would be greatly appreciated. Running WinXP Media, 512MB RAM, 32-bit, etc.

    Actually, Matt, I have tried that, but I certainly am willing to try again. Do you suggest deleting the current profile and all its settings, deleting the profile and keeping the personal settings, or just adding another complete profile in addition to the one that currently exists?

  • I m update my iphone3g 4.1.1 to 4.2.1 and i can't access backgroun runing applications..?

    i m update my iphone3g 4.1.1 to 4.2.1 and i can't access backgroun runing applications

    There is no multi-tasking for the iPhone 3G.

  • Having problems with security certificates-can't access sites

    I just installed Firefox & am not having problems which result in security certificate error messages. I cannot access Facebook; Pandora, etc.

    Which SSL error message do you get?
    Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
    *https://support.mozilla.com/kb/Secure+Connection+Failed

  • Are there any API's exposed for SCVMM 2012 which can be accessed via Java?

    I want to monitor the states of VM created using Hyper-V/SCVMM using the Java code.
    I have read that for Hyper-V i need to use J-Interop to acess the API of Hyper-V.
    Does SCVMM also provides API to get the basic information of VM ? If yes then is there any documentation to access it via Java.
    Thank you in advance.

    THE SCVMM API is PowerShell.
    Unless you want to also install Service Provider Foundation (SPF) in front for a web service.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    Disclaimer: Attempting change is of your own free will.

  • I am using 2 Wlan router networks. with one i am not having internet connection. Obviously i have to reorganise this bad network. How can get access to an application guide? i Have a windows PC in use.

     

    Do you want an application guide for the router or the iPad since you posted under the iPad discussion group?
    For the iPad, click on Support in the upper right part of the screen, then manuals, and the iPad group of products and then the user guide will be listed for download.
    For your router, if it is not an Apple product, you will have to do an internet search through Google for the brand and model.  If an Apple router, as with the iPad, Support > Manuals > Peripherals > AirPort

  • I followed your prompt to fix slowness but now i can't access some downloaded applications, how do i resolve this?

    I use windows 7 Ultimate in my laptop. I was experiencing slowness in starting and using mozilla firefox. I kept on seeing this prompt that said "Learn how to speed it up". I finally decided to follow the prompt and it showed me how to Re-set Firefox. Now however, i cannot access one of my really important downloaded Applications. Please, how do i resolve this?

    If you are referring to an addon, you can find it on the [https://addons.mozilla.org/en-US/firefox/ Add-ons Download Centre] and install it onto Firefox from there.

  • How can I access/activate Spy Application??

    I am working with Oracle 9.0.2.0.1 under Solaris 8.
    How can I visualize metrics information about my different OC4J instances? I have heard something named
    like Spy or AggreSpy but I don´t know how to access it or activate it.
    TIA

    Hi, Please read the file on the following link.
    http://otn.oracle.com/products/ias/daily/pdf/9ias_monitoring.pdf
    Thanks.

  • Using Final Cut Pro, can we create a subtitle which can be used in other applications?

    Can a subtitle file be created using FCP and later use in other application?

    Ian R. Brown wrote:
    You can create a title and export it as a video file to be used in any editing app but you won't be able to alter the words or layout once it has been exported.
    Export as ProRes 4444 if the title has alpha channel otherwise you'll lose the transparency.
    Andy

  • HT201412 Why i can't access the youtube application? Everytime i try to use it, it's a message "i Can't connect to youtube

    Somebody knows what happens with the youtube application?

    Before resetting try restarting.  Or you can go to Settings from the home screen > Wi-Fi > your network and scroll down to 'Renew Lease' and press that.  When you do you should see a button labeled 'Renew Lease?' and another labeled 'Cancel'.  Select 'Renew Lease'.
    You can either back out of that screen back to the home screen or just use the return button to go back to the home screen.  Then select Safari and see if you can hook in.
    I have to go through that process every five or ten minutes or so when in the second story of our house - weak router signal up there.

Maybe you are looking for

  • Error message when installing the latest version of itunes

    I tried installing the latest version of iTunes and received an error message.  Asked to reinstall, but still doesn't work.  I receive Windows Error 127 and AdiAdID_AcuireMatchSlotIfNecessary error messages.

  • Installing CE 7.1 SP3 on Vista

    I'm trying to install CE 7.1 SP3 on my laptop with Vista and I get an error message at the beginning of the install saying 'the subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Automatic LiveUpdate Scheduler does not exist on the 'localhos

  • Is this customization possible?

    I'm new to XML/XSL so I'm not sure if this is even possible. Our company's default web page header is a combination of javascripts and graphics files. How can I customize it so that every page displays this header instead of all the buttons and oracl

  • ACI Modification with Plug-in, bnt,...

    I coded plugin which Modifies ACI. Following is the plugin working and Problem. Plugin working. Client requests to modify "Macl" atrribute of some entry A. (Here, "Macl" attribute is user-defined attribute.) with this request, On server side, Plugin

  • I want to add a SSD drive

    to my early 08 MacPro desktop as the BOOT Drive, is the correct way to do this documented? I think I've seen one but I can't find it now. Thanks all.