Having syncing problems after installing iPhone OS 2.0 for the iPod Touch

Ok, after finally installing the software on my iPod Touch 2nd Gen, I tried to sync it, and it only syncs my pix and apps. It will not sync my music nor videos. It read " an unknown error has occured. (error 13019).
Has anyone else expericned this problem. It's starting to make me regret buying the upgrad software, specially since the iPhone and iTouch is basiclly the same thing. Donnt get me wrong it has the other features but I cant do the things that I orgianlly bought the Touch for.

Yes, I didnt unclick anything and and everything stayed the same since before the upgrade. I tried everything. And still nothing works!!!!

Similar Messages

Sync problem - earlier today I updated both iTunes and my iPod Touch. Since then, I have tried syncing the two. The iPod Touch claims that there is no music on the iPod, however, when I connect it to my computer it says my full library is on there.

Sync problem - earlier today I updated both iTunes and my iPod Touch. Since then, I have tried syncing the two. The iPod Touch claims that there is no music on the iPod, however, when I connect it to my computer it says my full library is on there. At present, I am unable to listen to songs on the iPod when not connected to the computer. What can I do to fix this?
Thanks for any help!

- Have you reset your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next would be to backup your iPod and then restore you iPod from backup via iTunes.

I purchased and downloaded Lightroom 5.5. After installing it, I was prompted for the serial number. When I entered it an error message appeared saying it was an upgrade serial number and I need to enter my original purchase number. This was my original p

I purchased and downloaded Lightroom 5.5. After installing it, I was prompted for the serial number. When I entered it an error message appeared saying it was an upgrade serial number and I need to enter my original purchase number. This was my original purchase, not an upgrade. Now what do I do?

It sounds like you bought an upgrade from Adobe. How much did you pay? The upgrade is about $80, and the non-upgrade is about $150. If you bought an upgrade version and had no previous version, you would see what you're seeing.
If that is the case and I were you, I'd call Adobe, and arrange for a refund and to order the correct version.
Hal

Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it?

Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it? Just in case it makes a difference I am trying to hook up an Avid Mbox Pro for Pro tools.

What is the part number and model of Firewire adapter?
I have used them in the past without any problems whatsoever.
Allan

Hi, please help my other daughter her ipod touch is disabled connect to itunes after say its itunes couldnt connect to the ipod touch coz its is locked with a passcode?? please help how...

hi, my daughter hers ipod touch is disabled connect to itunes after say its itunes couldnot connect to the "ipod touch" because its is locked with a passcode please help how to fix connect...i did turn off her ipod touch put usb back on there same in doenot say still ipod is disabled i dont understand please help how???

If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

I no longer have an iphone. Do I still need mobile me for the ipod touch?

I no longer have an iphone. Do I need mobileme for my ipod touch?

You didn't need MobileMe for your iPhone either, per se. What was it about the service that caused you to sign up? Was it the "Find My iPhone" service? If so, that would still be perhaps useful for the iPod touch, though since the iPod has no GPS locations may be less accurate.
If that doesn't answer your question, please post back with further information about your needs and what you're asking about.
Regards.

Is there a chat client for the iPod Touch or iPhone yet?

Is there a chat client for the iPod Touch or iPhone yet? I already know about Meebo and JiveTalk which allow me to chat on all the major clients, Yahoo, MSN, and AOL. But how about a standalone app?
Thanks,
Jeff

And so when are we talking about here? That one app and then I think this thing will be complete! Well I suppose we could use another food processor, garbage disposal, answering machine, music player, Swiss Army knife. But I'll be happy if I can just chat with friends!
Thanks!
Jeff

Bunch of ERRORS after installing SAP BPC 5.1 for the first time

Hi guys
Our basis guy is installing SAP BPC 5.1 for the first time. After the installation, I can get into SAP BPC - Administration screen but I get a lot of errors when I try to do some changes. Some of them are -
1. Whenever I try getting into the SAP BPC administration I get the following error. But when I click OK it gets me to the administration screen but after that Hell breaks loose
    Error on uncompressing file: Error : ActiveX component can't create object.
2. Create dimensions -
    Split File Error
3. Delete dimensions -
   OLAPConnect Error - The Database with ID = 'ApShell' doesn't exist in the collection
4. BPC for Excel (I am logging in as a system admin)
    The dimension information file cannot be created. There may be a network or security issue.
    Error Message: InitCatalog:Either the user does not have access to the ApShell database, or the database does not exist.
I am sure I will get a lot of errors once I start playing with the configuration.
Please comment.
Thanks,
Ameya Kulkarni

Hi Ameya Kulkarni,
I sorry I wrong type something,
1. Whenever I try getting into the SAP BPC administration I get the following error. But when I click OK it gets me to the administration screen but after that Hell breaks loose
Error on uncompressing file: Error : ActiveX component can't create object.
==>
You should do this step such as:
1. copy file "XceedZip.dll" into the directory SAP BPC
2. register that file into the register window using sintaks: "regsvr32"
3. If the successfully message box appears, You should open the MS.Excel or SAP BPC administration
2. Create dimensions -
Split File Error
==>
You should check the database your application in MS.SQL first please.Perhaps, It's does not open and retrieve data.
3. Delete dimensions -
OLAPConnect Error - The Database with ID = 'ApShell' doesn't exist in the collection
==>
You should check the database your application in MS.SQL first please.Perhaps, It's does not open and retrieve data.
4. BPC for Excel (I am logging in as a system admin)
The dimension information file cannot be created. There may be a network or security issue.
Error Message: InitCatalog:Either the user does not have access to the ApShell database, or the database does not exist.
==>
You must solve the problem no.2&3 because you should add new user through SAP BPC Administration for the application.
I wish My Suggestion can help you.
Regards,
Wandi Sutandi

HT1491 Not many of the apps say iPod... do the iPad and iPhone apps all work for the iPod touch5?

In the iTunes store, the apps do not say iPod, just iPad or iPhone. Do the apps/games work for the iPod??

No. Some apps are iPad only and some iPhone only. The Compatibility section on the App description page stated compatibility. For example this app is NOT compatilber with iPod touch
https://itunes.apple.com/us/app/compass/id520985073?mt=8
says:
Compatibility: Requires iOS 6.0 or later. Compatible with iPhone and iPad. This app is optimized for iPhone 5.

I'm having syncing problems after I upgraded my iphone 4 to ios 5 !!

Yesterday I went to a cellular shop and asked to upgrade my iphone 4 to ios 5.
Now that my phone is upgraded, I plugged it into itunes at home.
I was trying to sync all the applications and the songs and the photos.... to my phone but each time the syncing starts, after a few seconds it stops immediately without syncing anything !
Any ideas ???

same problem here!!!!!!

System problems after installing iphone & itunes

I'm wondering if anyone else has noticed a weird problem with their computers after installing the iphone & itunes.
Up untill i got the iphone, my computer was working fine. Now about every 15 - 30 mins, i get a few seconds of static sound from my speakers, and my monitor flashes in a way i can only describe as static on a tv screen.
i've been trying to figure out what the problem is, and thought it was just my copy of windows xp, then i noticed that every so often, my iphone will buzz either right before or right after the static hits my computer. I've also seen the same thing on another computer running windows vista, so at this point, i don't think it's the computer, and the issue never occured before installing the iphone.
Can anyone help me troubleshoot what is causing this, (or at the very least stop the static sound from the speakers so that it does not interfere with my music).
Any help would be appriciated, this is currently the biggest problem i have with the iphone.
thanks,
r.

Hi - yep, it's your phone causing the problem. But this isn't unique to iPhones, many (most?) cell phones will create this problem when placed near certain other electronic devices. I haven't been able to put my cell phone on my nightstand for years because it makes the radio/alarm clock buzz.
I don't happen to have problems with my iPhone near my computer screen or speakers, but it makes my alarm clocks and my cordless home telephones buzz like you described.
I believe the cell phone is essentially connecting to the mother ship to establish a signal! Like I said, this isn't unique to the iPhone. Just move it away from your screen/speakers and you'll have fixed your problem

Sync Problems After Installing Vista Service Pack 1

I just installed Vista service pack 1. Hotsync ceased to work. So, after checking Palm online help, I downloaded and installed Desktop 6.2 and Hotsync 7. The instructions said not to uninstall my previous version of Desktop 4.2 and Hotsync 6.01. After completing the installation, I find that my data had not been moved to the new location and that some Hotsync items had changed such as Quick Intall to Install. And, I still can't Hotsync. So, here's a series of questions:
How can I get my data over to Desktop 6.2?
Do I want to move the data over or should I reinstall Desktop 4.2? (I use an XP machine to print my schedule and usually simply copy the user folder from the Vista system to the XP system. There's no Vista print driver available for my hp printer.)
Is Palm trying to become Microsoft by changing where they store information to the confusion of a power user?
Any and all help would be appreciated.
Post relates to: Palm Vx

The version 6.2 of Palm desktop does not support your Vx.
Click here for the support page for 6.2; http://www.palm.com/us/support/downloads/windesk62.html
The only handhelds supported are Palm TX, Z22; Tungsten E2.
You will need to install the version that is on the CD that came with the Vx. You will need to "clean" uninstall Palm desktop on the Vista PC in order to re-install the older version of Palm desktop.
First thing to consider is, where is the current data. On the device or in the PC?
If you have the data in Palm desktop 6.2, do an export of the data for backup. After the re-install of the older palm desktop, import the data for each category. Since you are still using the XP PC and has data on that system, you can export the data from that PC.
In Vista, the userfolder is in documents-palm os desktop. One caveat here, the data format in the 6.2 user folder is not compatible with the data format in earlier versions of Palm desktop so you cannot copy and paste the entire user folder into the older version of Palm desktop.
Here is a procedure for backing up your data.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
To do the "clean" uninstall on the Vista PC, here are the instructions.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Disregard the first step above because your data is on the XP PC and we are just going to import the data.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before create a hotsync name.
Post relates to: Palm i705

Sync Problem when installing two Apple TV's in the same house

When I installed a second Apple TV, many of my ITUNES purchases, movies and songs, would not sync and I received the alert sign in Intunes AppleTV Icon to indicate the sync problem.
To fix, simply go to store authorize computer EVEN IF THE COMPUTER IS ALREADY AUTHORIZED and, like magic, problem is instantly fixed.
Message was edited by:

I have two ATV G2 and one ATV G1 at home with the same iTunes library. I have played two different movies in the ATVs. One interesting thing you get is that you can start one movie and pause it and then you can continue playing it in the other ATV. The iTunes controls where you pause or stop the movie.
Agree that bandwidth is the limit here and probably the server throughput. But, so far I haven't experienced any problem.

Problems after installing patch 108993-18 (ldap2 for solaris 8)

I�ve been struggling to get SSL to work in a solaris 8 as a client (pam_ldap)
I tried to use padl.com�s pam_ldap, but for some reason i couldn�t get it to work (always get a segmentation fault error). Yes, I can use ldapsearch on the server with SSL.
But then i heard that Sun had released this new patch that would do what I wanted >> to connect solaris 8 as a ssl-enabled client. (108993-18)
I checked if I had all the requisited patches, installed the patch and rebooted.
The good news is that i had no problem during the installation proccess. The bad news is that I can�t start the machine properly now! :( It just starts, then freezes and it stands there, before loading CDE.
from what I found, the problem seems to be coming from /var/ldap/ldap_client_file. Has the format of this file been altered in some way? I checked the readme but couldn�t find anything about it.
thanks for the patience...

force reloaded patch 109327-07
http://access1.sun.com/patch.public/patches/all/patch.readme/README.109327-07
it seemed to have the most to do with the resolver libraries, it installed successfully and I rebooted, no change..

Problem after updating to iOS 8.1 on my iPod touch 5th gen

I just want to report to Apple that after updating my iPod Touch 5th Generation to iOS 8.1, my iPod just shuts down by itself from time to time. The only way you can turn it on is by pressing the top right button and the home button at the same time. You can't turn it back on anymore by just pressing the top right button or by charging it like I used to. Is this one of the bugs that Apple needs to fix? Am I the only one who have this problem??

Try:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Having syncing problems after installing iPhone OS 2.0 for the iPod Touch

Similar Messages

Maybe you are looking for