Head Count of a person by age group
Hi Friends,
I want to count of a Number person based on their age group.
In my HR dataSource it is only counting for the employee age group.
I want to count it for the spouse, children and parents of the employee. We have a date of birth of them.
How i can calculate their age group and i want to show the count in the age bucket.
Please provide solution how i can count the person on theri age group. .........
Thanks & Regards,
Anand
check this
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a
Similar Messages
-
Hi ,
Please help me with the head count or personal planning document as I need to give the presentation for the same
with one of our client.
I will appreciate if documents are sent on my mail id rather links to sap are given.
Word document can also help.
My mail id [email protected]
Regards
ChickyNo answer came for this, so closing it.
-
Age group to make it time dependent display as per transaction date
Hi All,
I have a doubt in displaying a attribute as time dependent. Below is my scenario.
I have a cube where am capturing the transaction data of the customer. Currently while the customer data loading using the customer number i do look up to the customer master data and findout the D.O.B and calculate the Age group(bucket) and punch it in the transactin cube itself. Note Age group is calculated based on the DOB and the transaction date. It was working fine.
But issue raised today customer is registered and he is allowed to do some transactions immediately after that, and the personal details like DOB, address is captured latter. Hence all the transactions until his DOB is maintained in the source system is puched in cube w/o DOB.
Hence i do not want to have it in the cube and want to have the age group to be fetched from attribute / some other mean. But in case if i make the agegroup as attribute of the customer it will show only the current age. But i need to show the agegroup as on the transactions date.
For ex. today customer age is 25 and day after tmr his age changes to 26. And in this case if i execute the report for whole month under 25 i should get the transaction and under 26 age i should get the respective transaction.
how should u achieve this. please help me out.
Note: Having a virtual KF seems createing the performance issue because data volume pulling out is more in numbers.
thanks in advance
PremHi,
In this scenario i think Virtual Key figure is inevitable.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks.** -
Display in alv according to age group
Hi Friends
i have data in internal table
I have to group it according to age
i mean on age group
Which Needs to Display in ALV
so how should i group them in ALV
OUTPUT like this :
EMPNUM EMPLOYEENAME DATE OFBIRTH/AGE
AGE GROUP: 0-29
999999 DOE JANE A. 01/01/1980 27
999999 DOE JOHN A. 01/01/1980 28
TOTALS: EMP 2
AGE GROUP: 30-34
999999 DOE JANE A. 01/01/1980 32
999999 DOE JOHN A. 01/01/1980 33
TOTALS: EMP 2
AGE GROUP: 35-39
999999 DOE JANE A. 01/01/1980 37
999999 DOE JOHN A. 01/01/1980 36Hi,
Add a new field type c of length 30 in the final internal table and do as below.
loop at itab.
if itab-age GE 20 or itab-age LE 29
move : 'Age group 20 to 30' to itab-newfield.
modify itab.
clear itab.
else.
"Repeat same logic for different age groups.
endif.
"Do subtotaling by new field of itab and age. And use gt_fieldcat-no_out = 'X' for newfield, so that newfield will not be displayed.
Thanks,
Sriram Ponna. -
need help in head counting report..
how to calculate the head counting report.
what is the purpose of the head count report.based on requirement u can create
generally we can create by using PNP/PNCE logical database
if u want example to create report search in SDN u will get lot of examples
Gopi -
Update age group picklist based on value entered in date of birth
Hi Gurus,
Have a requirement where in user would enter the date of birth on a contact record and would like to populate another custom field called age group at the time of creating a new record.
The condition is some what like
Age
1 – 20 Teens
21-40 Young Adults
41-60 Adults
60 – 100 Seniors
I have tried using the age field but problem is that age is populated only when the record is saved.
Update the age group via workflow works fine but the saved record has to be modified before triggering the workflow. we would like to avoid the additional step of modifying the record
Is there any option to calculate age based on the value entered for date of birth - something like DOB Year - current year before saving a record or via post default without using workflows.
Thanks in advance,
ArunHi
The answer is yes, using the post default functionlaity.
take a look in the folowign example:
IIf(ToChar(Timestamp(),'DD/MM/YYYY')- [<DateofBirth>] < 20,'20','30')
You will need to make something like that, but replace the '30' with another IIf expression, and so on for the next interval.
note that date of birth should be between suqare brackets [ ] (it is shown here with underline for some reason...)
Good luck
Guy
Edited by: Shinshan on 08:45 30/12/2009
Edited by: Shinshan on 08:46 30/12/2009
Edited by: Shinshan on 08:47 30/12/2009
Edited by: Shinshan on 08:47 30/12/2009 -
Max number of persons in contact groups - Nokia Lu...
The max number of persons allowed in a contact group is (as far as I know) restricted to 20 persons. This seems very low and I wonder why this restriction is applied. A limitation of 20 persons in a group is not practical. Any explanation or any idea if this can be changed in the future?
As you've discovered the maximum number of contacts you can have in a contact group is 20. If you'd like this limit to be changed to a higher number you really should post a request or add your votes to a similar request on Microsoft's user voice fo.... This is the place that Microsoft created to field user requests for enhanced options for windows phone.
Microsoft MVP Windows Phone -
Name of person in Purchasing group
Hi experts
Is there some table or function module that I can find the user name of person in purchasing group?
Thanks
NilsonHello Nelson,
I don't know if a table exists to get this kind of information.
Nevertheless, using function module BBP_OM_DETERMINE_RESP_PGRP with no import parameter, you will have all purchasing data existing.
In export parameter ET_PURCH_DATA , look for your purchasing group.
In this way, you will get object ID for your Organizational Unit being a purchasign group.
Then, with FM BBP_OM_STRUC_GET_USER_FROM_ORG, you will find all users assigned to this OU.
Regards.
Laurent. -
What will I learn at the Hour of Code lesson next week at Apple retail stores? Also, what age group will be attending?
If you had searched for it you would have found Apple Retail Store - Hour of Code Workshop
-
Is it possible to add/remove a person from a group using workflow?
Hi All,
Is it possible to add/remove a person from a group using workflow?What version of SharePoint are you using?
There is CodePlex project that adds additional work flow steps that would help you out. These include
Create Site
Create Group
Add users to group
The link is http://ilovesharepoint.codeplex.com/releases/view/89201
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
Using Decode - Age Grouping???
Hi,
I am wondering if we can use decode/sign functions to achieve the following. If so I would like to know how without using stored procedures.
Depending on a person's age, I need to determine the person's AGE_GROUP. I will be decoding AGE and I need the AGE_GROUP in the below ranges.
Example:
AGE_GROUP (VARCHAR2)
<20
21-40
41-60
61-80
81-100
100How best can I achieve this? Thanks in advanceCASE statement is what you want
SQL> SELECT emp_name
2 ,age
3 ,CASE
4 WHEN age < 21 THEN '<21'
5 WHEN age BETWEEN 21 AND 40 THEN '21-40'
6 WHEN age BETWEEN 41 AND 60 THEN '41-60'
7 WHEN age BETWEEN 61 AND 80 THEN '61-80'
8 WHEN age BETWEEN 81 AND 100 THEN '81-100'
9 WHEN age > 101 THEN '>101'
10 END AS age_group
11 FROM employees
12 /
EMP_NAME AGE AGE_GR
John 18 <21
Mary 19 <21
Fred 24 21-40
Anne 36 21-40
Victor 103 >101Regards,
Steve Rooney -
Head count for the 3rd at 3:00am
Even though there are a lot of people that are not on the verizon forums but if you are here, let's get a head count then we can estimate other's that arent on here. Who will be up at 3:00am to pre-order their iphone?
say hello or me!Sorry friends, but it 3:00 AM for one and all according to their time zone. EST first and then it moves west, but it is 3:00 AM no matter where you live.
Not only that, but Verizon has allocated a specific number of phones for each time zone, and I would guess that zones with huge populations have more phones alloted to them.
I have researched high and low and I do know what I am talking about - no need to stay up until midnight, but there is a need, if you are as desperate as I am, to get up at 2:55 AM your time. -
Hi Gurus,
I am working for a software client, Here the client wants to generate based on Head count. Coul you tell me the process.
please look at the following example:
The client is providing services to the customers, from this clinet One team leader and 10 team mebers are working for their customer on a project.
here the price is like this:
for team leader: 10000$ per year
for team member: 7500$ per year.
So in this project they worked for 20 days. So how can i map it into SAP Sytem.
Cheers,
SumithHi Sumith,
did you work with PS? If yes - than have a look into intergration from PS to SD in customizing. You can take your planing data from PS into a sales document.
Regards Thomas -
Hi guru's,
how do u get head count in HR Report ? what cubes or info need to design ?
Thanks in advancehi hari,
You can use the info cubes 0PAPA_C02 and 0PA_C01 present in the info area Personnel Administration 0PAPA.
Thanks,
rahul -
Monthly Head count report as per Tax authority
Hi Experts,
Our team need to create report as per client requirements for Monthly Head count report by Tax auth. Please let me know is there any standard report through which we could refer for "Total head count per tax auth" output.
I will appreciate your prompt response.
Thanks,
AnkurDear All,
S_L9C_94000095 - Info System -> Reports -> Organizational Entity -> Headcount Changes
Balwant.
Maybe you are looking for
-
I have a Bluetooth receiver transmitter by Brookstone attached to the home stereo that we use to connect via bluetooth and play music from Pandora etc. From our iPhones or iPad. It has worked flawlessly until I updated the software on my iPad and iP
-
A search of the Library bookmarks should provide each bookmark's folder as well as Name, Tags, and Location. As it is now, a search (for example) for the string 'IESI', a refuse collection company in Central Texas, actually finds IESI. But what if yo
-
Deleting Cache in Adobe Camera Raw from Library
Hi There ~ I've seen similar questions, but not a definitive answer.... Currently, in on my Macbook Pro, my: Users --> Lv4Tunes --> Library --> Caches --> Adobe Camera Raw folder is at 85g. My Hard drive is only 200 gb..and I am almost at capacity. M
-
ZenVision:M - Why are no download services saying it is compatib
I realize the ZVM is not compatible with Yahoo's "MusicMatch" music download store. MM has bluntly told me so. So I went through the list of the others, including it's sister store Yahoo Music and the competitors like RealMedia's Rhapsody, Napster an
-
Change Height of Web Resource to Get Rid Of Blank and Scroll Bar
Hi, I am a junior CRM developer. I'm using CRM online. I wrote a HTML web resources. In Web Resource Properties, I set the Number of Rows as 20. But the problem is: If the form window are maximized, there will be blank under web resource; if the form