Header Renderer is getting Refreshed again & again...

Hi ,
I have a Advanced datagrid and I am using Header Renderer in a component for the same.. eg.
<mx:AdvancedDataGrid 
id="adg" headerStyleName="boldHeader"dataProvider="
{dataProvider}"
height=" 
100%"
headerRenderer=" 
{headerRenderer}"horizontalScrollPolicy="
on"
verticalScrollPolicy=" 
on" 
>
<mx:Component  id="headerRenderer">
 <mx:VBox horizontalScrollPolicy="off" verticalScrollPolicy="off" implements="
mx.controls.listClasses.IDropInListItemRenderer" 
>
</mx:component>
I have few components in my header renderer , & on basis of header text I am setting the visibility of components.
My components are Combo boxes & Text Box...
When i select any I tem from combobox Its not able to retain  the label to selectedItem for more that 30 secs....
but i want it to be retain till I change the selection....
Same is the case with text box It keeps the value for 2-3 seconds & clears the entered value
What could be the possible solution?
TIA

Seems your Header Reindeer got re-initialized after you set the values or may be the dataprovider updated, check your code.
if you have a simplified version post it here to look into the problem.

Similar Messages

  • CRM Header data not getting refreshed in BADI when clicked in New order

    We have used a ORDERADM_H BADI, header badi to populate some custom field values.
    Step 1) While creating sales order in CRM(CRMD_ORDER), we are giving inputs such as sold to party , material etc.
    Step 2) Before actually saving the order, we found that we dont need this order to be created and again click on create new button in the transaction. In order header BADI, order data for the previous order is not getting refreshed. The previous GUID is still there and function module CRM_ORDER_READ still retrieves the old order values which was cancelled in the previous step. It is causing lot of issues and finally giving dump.
    basically the previous GUID is not getting refreshed. Please suggest

    Pls send the code that you have in the Badi. Did you actually compare the GUIDs manually ? Instead of CRM_ORDER_READ have you tried using CRM_ORDER_READ_OW ?

  • Why page is getting refresh after submitting the order

    when i am clicking on submit order button in newScale request center tool.The form is getting refresh again and again.it is not procedding furhter.This is happening for a particular service.Please help me in this case.if someone had faced the same problem.                  

    You may want to open a case with the TAC on this one.  This sounds like it might be a browser compatability issue.  What browser are you using?  Did you try a different one?
    Also, this is forum is for discussion administartive issues for specific bugs or the bug tools.  Specific experts on each products will be in other forums. 
    newScale issues are better discussed in one of the forums here:
    https://supportforums.cisco.com/community/netpro/data-center

  • Report is not getting refreshed after changing prompts once again?

    HI,
    I am running some webi and deski reports using webi sdk also i'm handling the prompts of
    report.
    Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
    then i fill all the prompt for the report it shows the data for selected prompt values.
    But if i once again changed prompt values it shows data of previously selected prompt values not for
    the currently changed prompt values. means reports not getting refreshed.
    sometimes its work correctly.
    What will be problem?
    How can i resolve this issues?
    Please help me
    Thanks in advance
    Harshad

    The workflow is:
    1. Refresh
    2. Set Prompts
    3. Get View.
    then repeat.
    Are you refreshing before setting prompts?
    Sincerely,
    Ted Ueda

  • Why does pre-rendered footage get re-rendered again for every playback or preview?

    Dear Sir/Mdm,
    I'm a novice, please bear with me.
    I'm using an Asus laptop with:
         1. CPU: Intel i5-3337U @ 1.80 GHz (4 CPUs)
         2. OS: Windows 8.1 64 bits (6.3, Build 9600)
         3. RAM: 8 GB
         4. DirectX: Version 11
         5. On-board Graphics: Intel HD 4000
         6. Dedicated Graphics:  GeForce GT 740M
         7. Dedicated video memory: 2048 MB DDR3
         8. Nvidia Driver version: 6.14.13.3523
         9. Total available graphics memory: 4096 MB
    I hoped to avoid repeated rendering of footage segments during RAM previews, scrub-through, or playbacks.
    I pre-composed related layers of completed segments and pre-rendered the pre-comp, which gave a footage (in AVI format) to replace the pre-comp.
    But when I scrub-through, playback (spacebar), or do RAM previews, the pre-rendered footage gets re-rendered again (for every scrub-through/preview/playback).
    Need advice.
    Thanks.

    Thanks for the responses and apologies for the slow reply (I spent some time following-up on the clues from the kind responses and did a more focused reading of AE's Help page based on the clues).
    To answer Mr Szalam's questions:
         I'm using AE CS6 version 11.0.4.2
         Memory settings:
              Installed RAM: 7.9 GB
              RAM Reserved for other applications: 2 GB
              RAM Available for AE: 5.9 GB
              [Not selected] Reduce cache size when system is low on memory
         Previous Multiprocessing settings:
              Installed CPUs: 4
              CPUs reserved for other applications: 1
              RAM allocation per background CPU: 1.5 GB
              Actual CPUs that will be used: 0
         Current Multiprocessor settings: [Not selected] (due to advice given in the responses)
    Copy that on the RAM part. Time for a little hardware upgrade :-)
    For Mr/Mdm bogiesan's advice, thanks. Now I know more of what to look out for in simplifying future projects. For this current case, the pre-dendered movie-layer is the only layer-segment as I intended it to be a completed segment in the hope of avoiding repeated renders ... alas, it didn't turn out the way I hoped ... oh well :-)
    For Mr Dave La Ronde's advice, copy that. I've disabled multiprocessing. Indeed, I'm using sub-par hardware for the intended purposes.
    To sum up:
    From AE's Help-pages:
    1.  "If you have a nested composition ... you can save time during each rendering operation by pre-rendering the nested composition ..."
         Takeaway: Re-rendering will occur under all situations, be it a plain movie-layer, effects-applied movie-layer, etc. Pre-rendering was designed to save time on nested compositions only (i.e. re-rendering nested compositions take longer than re-rendering the pre-rendered version of the nested composition). 
    2. "The rendering of a movie is the frame-by-frame rendering of each of the frames that make up the movie.".
         Takeaway: Even plain-movies get re-rendered. Since pre-rendered movies are the same as imported movies, everything gets re-rendered without exception.
    Although Premiere Pro CS6 seems to handle movie footages with transition-effects more smoothly (e.g. during scrub-through), but I guess AE CS6 has much more to keep track of if it needs to tell the difference between a plain-movie and an effects-applied one ... perhaps a more optimized approach is indeed to render everything without exception. Perhaps a dedicated no-render-layer-slot can help AE to decide what not to render (i.e. anything dragged into such a no-render-layer will never be rendered) ... but that's just from a novice hobbyist's limited-knowledge perspective (I'm not a professional effects artist, which may be obvious from the sub-par hardware I use ... I bought the Teachers and Students Edition of CS6, which was kindly offered by Adobe at a steep discount ... and I use it to satisfy my curiosity of how those stuff-of-dreams sort of movie-effects are created ... for now, I'm only able to play with basic video montages :-)
    Thanks for all the responses. Case closed as AE seems to be designed to render everything without exception.

  • I want to get a previous purchase. It says downloaded but how do I get it again?, I want to get a previous purchase. It says downloaded but how do I get it again?

    I bought a tv series and downloaded it but the accidentally deleted the file, when I go into iTunes purchased items it says downloaded. How can I get it again without paying please?

    I would start off with Firefox's Add-ons page. Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then look for unwanted extensions and try the Remove button.
    If the Remove button is missing, this usually means the extension was installed through the Windows installer. In that case, check for it in the Windows Control Panel, Uninstall a Program. Clicking the "Installed on" column header will bring the most recent additions to the top for easier spotting.
    After you get rid of it, assuming you can remove it in one of those two ways, I suggest "mopping up" with some malware removers. This article lists tools that other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
    Any luck?

  • My itunesu says I have downloaded the lectures, but the files are not on my computer, how do I "get" them again

    Hi there. I was downloading lectures from iTunesU. The status shows them as downloaded, however two lectures in the series are not on my computer/iPad. How do I "get" them again?

    The downloaded content should be in the iTunes U section of your music app. To navigate to iTunes U content launch the music app, click more and look for iTunes U on the resource list.
    Additional resources
    http://www.apple.com/education/itunes-u/includes/overlay_introduction.html#overl ay-introduction
    -Regards

  • How can i get photoshop again on my computer after I throw it away?

    Hey there, I am Loes from the Netherlands and  I have a question, I tried a lot but it does not work. Hope you can help me..
    I wanted to reset the settings of my photoshop, but this didn't work, so I though maybe if I delete photoshop and then install it again I can start over.
    So I did. But now I cannot find photoshop anymore. I installed creative cloud again and again but creative cloud says photoshop is "up to date". and there is no way to click on it to download it again. Does anyone know were I can get photoshop again?? Hope you can help me. I just started to try 30 days for free but now i cannot use it.
    then if I will have photoshop again I also like to know how I can reset the settings of my brushes.
    Thank you very much!

    CC desktop lists applications as "Up to Date" when not installed

  • Airport no longer works with my MacBooks. Help an old lady get wireless again!

    First, I have to tell you that I'm as dense as granite when it comes to technology, so please talk to me in the simple terms you'd use with a dazed higher primate. Assume that I know nothing.
    My story: I have the world's oldest MacBook Pro and am also using a new MacBook Air. I had a new Airport base station that was working fine with the MacBook Pro until I moved two years ago. I know nothing was dropped or mishandled, because I moved the electronics myself. But when I set up stuff in the new house, with Airport in a spare room and using the laptop in my bedroom where I have little room for anything but me, the MacBook would no longer recogize the Airport.
    I tried moving Airport into the same room, thinking there might be something wierd with the walls of the house, but still no dice.
    So I've been wired to the Comcast modem ever since. I trip over cables so often, I can do it in the dark.
    Things are getting complicated now, because I've added a printer/scanner. Since I can't use it wirelessly and don't wish to trip over the cable every time I stand up, I hardly ever use the thing. Also, I'm shopping for a new TV and have dreams of being able to connect it with the Mac for watching movies, etc. The thought of using more cables makes me sad.
    BTW, I'm currently using a borrowed MacBook Air, circa 6 months ago. It doesn't recognize Airport either. Airport is currently sitting in its box, bored and depressed.
    Since nothing I own is under warranty any longer, I'm looking for free advice here instead of paying Apple by the hour.
    Two questions:
    (1) the ****? How do I get wireless again?
    (2) Is Airport interchangeable with other wireless modems, like the one Comcast offers me?

    When you connect your MacBook Pro to the Comcast modem using its Ethernet cable, you are establishing the same sort of connection with it that would be used by your AirPort sitting in the box. The modem does not care what is connected to it, but it can connect to only one device at a time. Most of them "remember" that device as long as it is powered up, and will refuse to communicate with anything else.
    So the first thing to do is power down the modem. Unplug it. Then, connect your AirPort's WAN port to it (Extreme or Express, whichever one you have) and then power them both up. With any luck your MacBook Pro might just connect wirelessly like it used to in your last home.
    If it does not, you probably need to reconfigure the AirPort Base Station again as if it were new. To do that, "hard reset" the AirPort Base Station by pressing its tiny reset button and holding it depressed long enough for its LED to flash rapidly. Then, the LED will glow solid amber for a moment or two, then it will begin to flash slowly. When that occurs select its network in your Mac's Wi-Fi menu. Its name will be "Apple Network nnnnnn" where nnnnnn = a code unique to your base station. Select it.
    Then, launch AirPort Utility - it is in your Utilities folder - and it will detect that your AirPort base station has been reset. Click the Continue button, answer the questions, and it will reconfigure the AirPort to those settings. The questions should be self-explanatory. When you are finished you will be prompted to restart the AirPort.
    The next step confuses people, because after restarting the AirPort Base Station the network name that you had been using to configure it immediately ceases to exist. AirPort Utility may as well just sit there forever so just quit AirPort Utility. You have to manually select the network you just created by selecting it in the Wi-Fi menu again.
    If you run into problems and need more help, meaning you must communicate using the Internet again, just remember the first paragraph - power down the modem whenever you change what is connected to it. Make it a habit.

  • I've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should i do???

    i've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should I DO ???                TS KEEP ON RESTARTING ALL THE TIME

    Hi there balaji007,
    You may find the troubleshooting steps in the articles below helpful.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W. 

  • ALE Change pointer BDCPS table gets processed again and again

    Hello,
    In Test system, when we run BD21 for DEBMAS, same change pointers getting processed again and again. This did not happen in Dev.
    We did client copy for building Test system from DEV  (Gold client).
    Is it possible to carry over few table entries from Dev (even though it is gold client) and these entries cauing aboev problem while runnign BD21?
    Is there any way to get rid of it? Will BD22 help?
    Thanks.
    Rupali.

    >
    Rupali K wrote:
    > Hello,
    >
    > In Test system, when we run BD21 for DEBMAS, same change pointers getting processed again and again. This did not happen in Dev.
    > We did client copy for building Test system from DEV  (Gold client).
    >
    > Is it possible to carry over few table entries from Dev (even though it is gold client) and these entries cauing aboev problem while runnign BD21?
    >
    > Is there any way to get rid of it? Will BD22 help?
    >
    > Thanks.
    > Rupali.
    Hi Rupali.
    BD22 is used for erase change pointers. Why don't use WPMU ? or WPMA ? Using transaction WPMU, this
    take change pointers, and mark it like processed. I'm using WPMU, and it's  working.
    Regards.

  • My iPad is disabled after entering many wrong passcodes by my kid, and is asking me now to connect to iTunes to get enabled again (unlocked), however when I connect to iTunes, it asks me to first unlock the iPad? what is the solution

    my iPad is disabled after entering many wrong passcodes by my kid, and is asking me now to connect to iTunes to get enabled again (unlocked), however when I connect to iTunes, it asks me to first unlock the iPad? what is the solution

    You need to place the device in recovery mode ...
    f you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
    Instructions for putting the device in recovery mode > iOS: Unable to update or restore
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present

  • My Back arrow has disappeared. How can I get it again?

    My "Back" arrow disappeared from my Firefox toolbar. How can I get it again?

    If the menu bar is hidden then press the F10 key to make the menu bar appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    *Open the Customize window via "View > Toolbars > Customize"
    *Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    *If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
    *If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
    You are using a no longer supported Firefox version and should consider updating to the latest release (currently 8.0.1).
    You can find the latest Firefox release here:
    *Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  • Y there is no option in iPad mini to directly go down or at last image by jus tapping at right corner, same option is available with iPhone , I hv 7000 images in album, it gets difficult again n again to scroll down 7000 images n come at end

    Y there is no option in iPad mini to directly go down or at last image by jus tapping at right corner, same option is available with iPhone , I hv 7000 images in album, it gets difficult again n again to scroll down 7000 images n come at end

    We are fellow users here on these forums, as far as I know Apple haven't said. If you want that feature then you can try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • HT1420 I purchased and downloaded and album of ten songs. most of the songs cut out after several seconds. How can I get them again without having to re-purchase???

    I purchased and downloaded and album of ten songs. most of the songs cut out after several seconds. How can I get them again without having to re-purchase???

    Delete the problem song(s) from library including file(s). Then go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Select Music tab to re-download again for free.

Maybe you are looking for