Heading Titles Groups in BW Report

Hello:
I have this BW Report which has YTD, Previous Year, and Current Year information. For each category there are at least 3/4 columns related to each category. The user would like to have a heading right above each group. This would make the report more readable. I know that I can accomplish one group by doing a structure and bellow it have the 4 columns for let's say the YTD columns. But we cannot have more than one structure and I need to have 3 in total.
Example would be:
Cummulative YTD     Previously Billed    Current Qtr Bill
YTD1 YTD2 YTD3     Prev1 Prev2 Prev3   Curr1 Curr2
XXX   XXXX XX      XXXXX   XXX   XXXX      XX    XXX
Does anybody know how to get this extra heading above each grouping area in a report?
(Cummulative YTD   Previously Billed    Current Qtr Bill)
Please let me know.
Thanks,
Helena

Hello Sudh:
Thanks for your reply....But I have one more question:
1. How do I wide the query headings
2. Let's say I have 3 columns: Column H is Amount; Column I is Price and Column J is Quantity. Now above these 3 columns I want a row with a heading that says "------Current Data -
". This heading would start in Column H and finish in Column I. How do I do that?
Thanks again for your help!
Regards,
Helena

Similar Messages

How to display dynamic header title in the report?

I have a req to display dynamic header title in the report.
When a id is entered in the prompt text, it will display the user data based on that user_id.
so similarly....the header title should vary each time when you select different user_id.
How can we implement this?

>
Zack H wrote:
> Lazaro,
>
> It depends on what you want displayed in the heading for each id.
> Please elaborate.
>
> Thanks,
> Zack H.
Zack..I have several projects listed under several project id's...
so when a user selects project id 00164 then it should display something like "Project document for Jon Doe"
again when the user selects project id as 00192 then it should display something like "project document for Zimmerman"
Did you get it??

How to show custom header in pdf generated from report

Hi,
I have created a report that is used to display Leave record of employees in an organization. After which it creates a pdf file and send it to respective HOD.
In this case I am trimming generated output and sendinf only required fields to the pdf.
When pdf is getting generated it shows program name as Title of that report.
I want to change this header to my own header along with some variable but not sure how I can do so.
I have also tried TOP-OF_PAGE but problem in this case is that I am still getting program name along with it.
To generate pdf I have used function :
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
    exporting
      src_spoolid   = spoolid
      no_dialog     = ' '
    importing
      pdf_bytecount = l_no_of_bytes
      pdf_spoolid   = l_pdf_spoolid
      btc_jobname   = l_jobname
      btc_jobcount = l_jobcount
    tables
      pdf           = l_pdfdata.
Then I had converted this pdf to Binary
call function 'QCE1_CONVERT'
    tables
      t_source_tab         = l_pdfdata
      t_target_tab         = lit_record
    exceptions
      convert_not_possible = 1
      others               = 2.
Then I had created subject matter and used FM : SO_NEW_DOCUMENT_ATT_SEND_API1: to send mail to respective HODs.
I tried dubbing it but couldn't get any variable which is holding program name.
Sorry for putting in wrong forum.
so Closing it from this forum and raising the same in ABAp-General forum.
How to change header of pdf in generated report
Edited by: gaur.yagyesh on Apr 16, 2010 4:03 PM

To make it more clear to my question.
I am using sun one webserver 6.0 sp6.
I need to enable custom header on the webserver so that any request having a custom http header coming to webserver should be captured by the webserver.
Thanks,

Show Subreport Name in the header part of the main Report subreport wise

Hi,
I want to create a Report which contains a collection of Subreport.
In header part of the main report I have one expression which shows specific text for specific subreport.
In Detail
I have three subreport named as
Sureport1
Subreport2
Subreport3
I have given page name for all the three subreport as subreport name.
Now I create one Main report. Where I drag one table and delete the group.
I created three rows in this tablix.
And in each textbox I have inserted one rectangle.
and place all the three subreport.
and here my expression is mentioned below.
=IIf(Globals!PageName Like "Subreport1","Subreport1",
IIf(Globals!PageName Like "Subreport2","Subreport2",
IIf(Globals!PageName Like "Subreport3","Subreport3","")))
This expression is working when I am placing all the subreports inside separate rectangle but not working when I am placing all three subreports in one tablix.
For both case it is showing in report designer window but in second case it is not showing in the pdf.
Thanks,
Aswini Rout

Hi,
As the description, I understand that you want to display the subreports’ name on the page header of the main report. When the page display a subreport, display the corresponding subreport name in the header part of the main report.
Base on my understanding, you should have page break on each subreport(suppose you add the subreports without Rectangle) since there is no group in the main report and there should not be a page break in the main report. If I have misunderstood, please correct
me.
I was not able to reproduce the issue currently. How did you define the page name of your main report. If it is possible, please upload your rdl file to your OneDrive and share the link here. You can also capture the screenshot so that I can understand the
problem in more details.
Thanks.
Tracy Cai
TechNet Community Support

Display Current Date on Heading Title (TTITLE)

I am using sql*plus to write a report. I would like for the current date (and time if possible) to be displayed in the title of my report (TTITLE.) It appears that I'm supposed to use a system variable called, _DATE, but I'm not sure what to do. I'm running sql*plus v.10.2.
Here is my code. How can I include the current date to be displayed in the "RIGHT" side of the TTITLE heading?
TTITLE ON
TTITLE LEFT 'MY COMPANY' CENTER 'Weekly Invoice Totals for Cost Center: 10 - MANAGEMENT' RIGHT 'Date: '
set pagesize 66
set linesize 120
set wrap off
column vendor_name heading 'Supplier' format a40
column invoice_num heading 'Invoice Number' format a30
column invoice_amount heading 'Invoice Amount' format 999,999,999.99
set underline =
compute sum label TOTAL of invoice_amount on vendor_name
break on vendor_name skip 2
SELECT
po_v.vendor_name,
ap_inv.invoice_num,
ap_inv.invoice_amount,
FROM
ap.ap_invoices_all ap_inv,
po.po_vendors po_v,
WHERE
ap_inv.vendor_id = po_v.vendor_id and
ap_inv.creation_date > SYSDATE-10;

Hi,
Define a substitution variable, then use that variable in your TTITLE statement:
COLUMN     report_date_col     NEW_VALUE report_date
SELECT     TO_CHAR ( SYSDATE
          , 'DD-Mon-YYYY'
          )     AS report_date_col
FROM     dual
TTITLE LEFT 'MY COMPANY' CENTER 'Weekly Invoice Totals for Cost Center: 10 - MANAGEMENT' RIGHT 'Date: &report_date' SQL*Plus can't execute functions (like SYSDATE).
To get function results into a substitution variable, you can use the COLUMN ... NEW_VALUE command, as shown above, then call the function in a query.
Note that both the substitution variable and the title are static. That is, if you include the hours-minutes-seconds in the format, and run the SELECT statement at 17:00:00, then execute the TTITLE command at 17:00:05, and run reports at 17:01:00, 17:02:00 and 17:03:00, the title on all the reports will say 17:00:00.

How to place aggregated fields in the page header or group header

Hi,
i have a report where in i have to display a header based on the aggregated value of a field
currently the field has values like
row1 blank
row2 blank
row3 Cookies
row4 blank
I wanted to know how to get the maximum of these rows in the page header i.e. it should come as Cookies for this case.
Is there any way to get this? it is easy in the footer where i can do a maximum of this field and get the value but not sure how to get this in the group header.How do we group maximum at the page header or group header?
Require your help on this at the earliest.
Thanks
Shilpi

Hi Shilpi,
>
Shilpi Sinha wrote:
> currently the field has values like
> row1 blank
> row2 blank
> row3 Cookies
> row4 blank
>
Do display these things in a subreport(i mean adda subreport in detail section). And Create a formula in the subreport itself with shared varible for assiging the maximum value ..
Then in the main report , create one formula with same shared variable and just display in Header secton..
Regards,
Salah.

I want to display header information of My ALV Report center Aligned.

Hi all,
I want to display header information of My ALV Report center Aligned. How can I do it..Also I want to show two different Layout display of ALV report according to the Radio Button Present in the selection screen.. Pls help me out in this.

Hi,
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
      wa_header type slis_listheader,
      t_line like wa_header-info,
      ld_lines type i,
      ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = '       EKKO Table Report            '. Leave Space such that it comes to Center
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
               sy-datum+4(2) '.'
               sy-datum(4) INTO wa_header-info.   "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
                    into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
           i_logo             = 'Z_LOGO'.
endform.

Header and Footer in BEX reporting

Hai friends,
     could you plz tell me how to add Header and Footer in Bex report.. that means.. i want some my company name and address should print on the top of the report..
and also.. in the Footer. i want to display the Number of records are selected...
Ex :
   XYZ ORGANIZATION
   #301, ITPL,
   BANGALORE.
4 Records are selected
so, plz give me the solution .... how to   design a query with this requirement
thanks
with regards
@jay

Hi Ajay,
Refer to web tempaltes 0adhoc_header and 0adhoc_Footer , by changing this you should be able to display header and footer for each query out of BW server.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

How to store the value of sum of group in Crystal Report at the runtime!

Hello all,
I creates a Formula Field that hold the value of Sum of Group in Crystal Report. I would like to know how to store it in a variable and pass it to store procedure. Is it an option in Crystal report to do it. I knew that Crystal Report can cache the report for sharing. My detailed issue as following:
- Created a Formula Field named TOTAL AMOUNT that calculated the complex expression. This TOTAL AMOUNT is dynamic based on group and variables.
- I would like to store that value from TOTAL AMOUNT and pass it to the stored procedure parameter IN.
Any helps are much appreciated. Thanks.

I doubt that this is possible since it would only calculate this value once the report has data. This sounds more like a report design question that should be asked over [here|SAP Crystal Reports;

Problem in Exporting a Report Group having a Report Painter Report.

I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
       group 0102CPDNUEA-CCROSI not transported.
       Transport groups separately if necessary.
There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

hi,
I am able to export my report groups with dependent objects successfully.
I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
IF SY-BATCH = 'X' OR NO_LIST = 'X'. "direct or batch
    SET PF-STATUS 'LIST'.
*****PERFORM TRANSPORT_OBJS USING 'X'. "transport all jobs
    IF FILE_EXP <> 'X'.
      READ TABLE WT_E071 INDEX 1.
      IF SY-SUBRC = 0.
        LEAVE.
      ENDIF.
    ENDIF.
ELSE.                                "online
    SET PF-STATUS 'MENU'.
   PERFORM WRITE_TRANSP_OBJS.
ENDIF.
regards,
ram

Header and trailer pages in report templates

Hi:
I wonder how can i make header and trailer pages in the tamplate reports , so that the objects in the template header & footer report would be inherited to the generated reports. I use Oracle reports 6.0.8 and there is no header section, niether Trailer section in the Template Editor, I've read in the reports online help :"You can use the margin and body of the Header and Trailer sections to create a Header and Trailer page as in earlier releases. In future releases, you will be able to add and delete sections.", is there any method i can use to make header&trailer pages in the template.

I have the same question. This is what I found on Metalink.
goal: How To Define A Header/Trailer Section In A Reports Template Definition File (TDF)
fact: Oracle Reports Developer
fix: It is not possible to have a HEADER/TRAILER section in a Reports Template Definition File (TDF). Templates do not need to have a HEADER/TRAILER section, infact there is no sectioning in a template. They just define the visual layout when applied against a report section.
This did not answer my question!

Generating Header and trailer sections in reports..

Hi all.
I want to generate reports, that has both a header- and a trailer section page.
Usually this was part of the template report, but in Designer 9, the generator first converts the template report (.rdf) to a template report (.tdf), and is then using this template.
But where is the header- and trailer page? You can't see them in the reports builder, when looking at templates, and the generated report does not contain any header- nor trailer pages.
Have I missed something?
Any replies welcome...
Benny Albrechtsen

I have the same question. This is what I found on Metalink.
goal: How To Define A Header/Trailer Section In A Reports Template Definition File (TDF)
fact: Oracle Reports Developer
fix: It is not possible to have a HEADER/TRAILER section in a Reports Template Definition File (TDF). Templates do not need to have a HEADER/TRAILER section, infact there is no sectioning in a template. They just define the visual layout when applied against a report section.
This did not answer my question!

Customer group wise sales report

can somebody give me a clue as to how to take customer group wise sales report
thanks

HI,
it will not get the sales report with customer group wise in standard SAP.
in standard you will get the data for the following selection :
a. Sales Office wise : MC-E
b. Sales Organization wise : MC+2
c. Material(Article) wise : MC+Q
tell me one thing, whether u need the report customer group wise or customer account group wise.
Regards,
somu.

Modify the title of a wad report at run time.

Hello Gurus,
i have a query in a report which lists the products.On clicking on a product, it takes me to anthr template which has the details of that product.The current scene is that whenever the user selects a product its detail report opens in a new browser.
The requirement is to display the name of the product in the tiltle bar of the browser.
I have the value of prod selected in a var(thru ABAP code), how can i set the title of the summary report at run time??
Please send suggestions ASAP.
Thanks
Regards,
priya

Hi Priya,
insert a text element into your detail web template and surround it by
<div id="someid" style="display:none">

</div>
The text element should display the value of the selected product and its property "ONLY_VALUES" should be set to "X". Now you can access the value of your selected product via JavaScript:
<script language="JavaScript">
function getSelectedProduct() {
var selectedProduct = document.getElementById("someid").innerHTML;
return selectedProduct;
</script>
Now you can set your title with the selected product.
I hope this helps a bit.
Greetings,
Daniel

SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT - Active Directory Security Group Discovery Agent reported warnings for 524 object(s). DDRs were generated for 0 object(s) that had warning(s) while reading non-critical properties.

Hi, can anyone help me troubleshoot the following please:
Active Directory Security Group Discovery Agent reported warnings for 524 object(s). DDRs were generated for 0 object(s) that had warning(s) while reading non-critical properties. DDRs were not generated for 524 object(s) that had warnings while reading
critical properties.
Possible cause: OU name or Security Group name may contain at least a Unicode character which has conversion problem between Unicode and your system ANSI locale(e.g. Korean characters in English System Locale). The site server might not have access to
some properties of this object. The container specified might not have the properties available.
Solution: Please verify the Active Directory schema for properties that are not replicated or locked. Refer to the discovery logs for more information.
Does the error relate to 524 security groups? There are several invalid search paths listed in adsgdis.log, are these related?
Thanks,
Dale

You'll have to examine the log to determine exactly which objects its referring to. Although this is in the context of group discovery, group discovery still creates DDRs for computer objects within those groups so it could be either groups or computers.
This is not a search path issue though as it's clear that the discovery process found 524 different objects, but as stated, it could not properly read criticial properties of those objects and thus did not create DDRs for them.
As mentioned, reading the log in detail will list the objects individually and the reason it could not create a DDR for it.
Jason | http://blog.configmgrftw.com

Heading Titles Groups in BW Report

Similar Messages

Maybe you are looking for