Headphone jack delay

When I plug any headphones to my mid-2011 MBA, it takes 2-5 seconds for the sound to start playing from the headphones.
During these 2-5 seconds the music still plays from the external speakers. When unplugging headphones the music starts playing from the speakers almost immediately, with maybe a 1-2second delay sometimes.
Why is this? Can this be fixed with a SW-update? Is this common? Should I have my laptop replaced?
Is this a Lion-related issue?

I bought a refurbished mid 2011 13" Macbook Air with the same 3 second delay. I've had it for 48 hours now.
This is hopefully a software glitch with Lion, as it would
be totally unacceptable for a thousand odd dollar machine.
I have found forums elsewhere on the web discussing this same issue.
Apple? Are you there?

Similar Messages

Headphone jack not working on new Macbook Pro what is causing this?

My 17 inch Macbook Pro is less than two weeks old. The headphone jack does not recognize the headphones about half the time. This occurs with several pairs of headphones and yes, they are ther right size. This is really frustrating on a brand new 3500 dollar machine. What is causing this? It almost seems as if the headphones cannot make contact due to the fact that the connection is too far recessed. I don't live near an Apple store so dealing with this is going to be a P.I.T.A. Anyone have any ideas on how I might fix this issue? Thanks!

Hi, and thanks for your reply. I didn't have a red light emitting from the jack. I had already checked in the sound preferences to make sure the settings were correct. The headphones were not being recognized. This was not working with several differing sets of headphones. I made a phone appt. with Applecare. The laptop PRAM was reset and it works. There is still a bit of a delay when I plug in the headphones before they are recognized and I do feel the port is just a bit "off" as the no headphones plug all the way in. They seem to just sit almost flush but, not quite. However, resetting it resolved the issue to a satifactory level. Applecare said the issue was that not enough power was getting to that function on my laptop. They gave me the case number and I can use it if I have any further problem when I take the laptop in with me to any Apple service center. I was quite satisfied with how this was handled by Apple and if I have anymore issues will follow up.
I love this laptop but, even though this is working now I do feel that port is somewhat recessed a bit much.
I also want to add that this is my first Mac and despite having had this issue I was extremely impressed with the Applecare call that I got to help resolve this. One of the reasons I went with a Mac was the reputation for service Apple has. I was fed up with Sony to the hilt. I was glad I went with this Mac despite the headphone issue because had I still been with Sony, I'd have been give a major run around to deal with this issue. So far, Apple has tried everything possible to help me with this and assured me should I have any further issue they will immediately resolve it or give me a new machine. WAY better than dealing with Sony! I do not regret going with this MAC headphone issue or not!

Headphone Jack Glowing Red, Internal Speakers Not Working...

Hey, I have a 2.0GHz White MacBook (almost a week old), and I just recently came across this problem (this morning, actually). I usually have my MacBook connected to some external speakers through the headphone jack, the internal speakers are pretty terrible. Anyway, last night I left the computer on playing music as I fell asleep, this morning I woke up and the computer must have some how come unplugged from the AC power, as it was dead. I plugged it back in and everything was fine (I mean, it had to charge up, and the battery 'health' in iStat Pro was down to 93%, also not sure what this means... But everything else was fine). Then, I unplugged my external speakers and the jack was glowing red, I believe there's an LED inside. The internal speakers would then not work.
I did a quick Google search and discovered that this problem had been experienced on MacBook Pros. Someone recommended plugging in a set of headphones, I did so and then unplugged them and the internal speakers worked for a moment. I plugged in the external speakers again, and they worked (and work) fine. The problem is with the internals, they don't work, and plugging in my headphones again has not solved the problem, and the light is still on when the jack is not occupied.
Any ideas?
[edit] As of this writing, they are currently working, after plugging in the headphones again and unplugging them, however, the light still blinks when I do this, and there is a bit of a hesitation between the headphone being unplugged and the internal speakers kicking in... (longer than normal, I know there was always a slight delay, but this is a few seconds of blinking light and no sound).

you can fix this by "cleaning" the audio jack. the computer thinks that a digital output is connected. if you go to sound under system preferences, and it says digital output rather than internal speakers, then this is the problem.
I used a tightly rolled up piece of toilet paper to clean the jack. I twisted it up, stuck it in the jack, and then moved it around for a while. the red light went off and my internal speakers started working. someone else used a toothpick.
also, before i fixed this, i couldn't turn the volume up or down (unless i was using headphones) and the volume level screen that shows up on the screen had a circle with a line thru it...like the no smoking signs, but small and just under the volume bars.
http://discussions.apple.com/thread.jspa?messageID=3700681&#3700681
good luck

ITunes no longer keeps speakers running on headphone jack

iTunes no longer keeps my external speakers running when connected by audio cable to the headphones jack. After 1:45 min:sec, my Logitech Pure-Fi Anywhere 2 speakers power down when connected to my computer playing iTunes.
The speakers do not power down for audio generated from other sources on my computer. When I play a video or audio file through Safari or another browser, the speakers work fine. When I listen to an audio file by selecting it in the Finder using Apple-Y ("quick-view"), the speakers run continuously until the end of the track without powering down. When I use the speakers configured the same way with other software (such as Skype), they work fine.
The speakers do not power down for audio generated from other DEVICES. When I plug the speaker cable into the headphone jack of either my iPhone 3Gs or my partner's mp3 player and play audio, the speakers work continuously.
I've looked at trouble-shooting for iTunes and found nothing on the Apple site or the web or in the iTunes preferences to keeping wire external speakers live during iTunes playback. I've tried having the speakers connected to a power source or running on batteries but the problem is the same. I've reset the speaker device with no change. I've reinstalled iTunes, no change. The Apple Store genius bar cleared all caches and restarted, no change. They reinstalled the computer system, but found no change.

Hi Dexterdawg
Can you direct me to the thread as I can not sort out the same problem on my iMac
Thanks

Headphone Jack No Longer Works

Does anyone know of headphones that may plug into the bottom outlet of the iPod, where it connects usually to stereo equipment. My iPod still works with this connection, to charge it, to listen on my computer, on my stereo but the headphone jack no longer works so I can't use it in my car or at other times.

Ok I just talked to headroom and with this adapter you can go directly to a set of headphones or to one of their amps. Additionally the pin connector provides improved sound quality over the cheap headphone jack that comes stock on the ipod.
http://tinyurl.com/272myv

IPhone 4 headphone jack not working right.

So the headphone jack in my iPhone 4 i don't think is working properly. The right headphone does not put as much sound out as the left. I'm not sure why it was working perfectly just yesterday. I haven't dropped it or got water in it or anything. I tried plugging it in and unplugging it a few times, i reset my phone, turned it off then on and nothing seems to be working. Its not on silent and the volume thing is centered. Idk what could e happening. Help!!!

I would test the headset in another device such as a computer
and test another 3.5mm minijack headset in the phone to tell if it's the phone or headset

How do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.

how do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.
all i have is the internal mic option, can anyone help?
thanks

You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Is there a way to disable the headphone jack?

A few months ago my macbook pro 2012 (non retina) fell and the headphone jack was destroyed in the process, and the sound on my internal speakers no longer work. The apple genius said that the only way to get my headphones and speakers working again would be to replace the logic board. What I'm wondering is if there's a command to type into the terminal that would just bypass the headphone jack entirely so that I could at least get sound through my speakers. Like I said, there's no hope of saving my headphone jack so I don't need advice about how to re-enable it. I'm hoping for a command for terminal to disable the headphone jack so that I can hear sound through my internal speakers. Help?

Well you have to take a break, sleep, etc sometime! The repair may take just a few minutes.
Your other option would be search on the Fixit website and YouTube's "how to tutorials."

Is it possible to use a cable with two headphone jacks on either end and an electric guitar adapter to record in Garageband?

Hey everyone,
I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air).
I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
I can't do that. I tried.
Please help!
Thank you.

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

How to make my computer send all the audio through optical audio cable instead of headphone jack?

Howdy,
To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
Thanks in advance!
My desktop is:
ENVY h8xt,
• Windows 8 64
• 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
• 12GB DDR3-1333MHz SDRAM [3 DIMMs]
• 1TB 7200 rpm SATA hard drive
• No secondary hard drive
• 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
• 300W Power supply
• SuperMulti DVD Burner
• Wireless-N LAN card (1x1)
• 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
• No Additional Office Software
• No additional Security Software
• No TV Tuner
• Beats Audio (tm) -- integrated studio quality sound
• HP USB volume control keyboard and mouse with Win 8 keyboard
• Adobe Premiere Elements & Photoshop Elements 10
And the laptop:
HP ENVY 15t Quad
• Windows 8.1 64
• 4th generation Intel(R) Core(TM) i7-4700MQ Processor
• NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
• 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
• 8GB DDR3 System Memory (1 Dimm)
• 1TB 5400 rpm Hard Drive
• 24GB flash Hard Drive Acceleration Cache
• No Additional Office Software
• Security Software Trial
• 6-Cell Lithium-Ion Battery
• No Internal DVD or CD Drive
• Standard Keyboard
• HP TrueVision HD Webcam w/ integrated digital mic
• 802.11 AC WLAN and Bluetooth(R) [2x2]
This question was solved.
View Solution.

Hello @_goma,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
To configure your desktop to enable the optical audio cable, I recommend following the steps below:
Step 1. Click the Windows Key Button on your desktop
Step 2. Type "Control Panel"
Step 3. Select "Control Panel" in the top right-hand corner
Step 4. Select Sound
Step 5. Under the Playback tab, right-click the white area below the devices available
Step 6. Select "Show Disabled" and "Show Disconnected Devices"
Step 7. Connect your Optical Audio Cable
Step 8. Select your Optical Audio Cable as the default device and click "Enable"
Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Video out from the headphone jack died... 30gb 5g

Hi all.
So, I have a 30gb 5g ipod. I have played video out of the headphone jack to a tv for years now. I have the apple version of the video out cable. So, recently, the video stopped playing. The audio plays. YES, it is set to tv out = on, NTSC. This worked fine. Now no video. Video DOES play on the ipod itself. And, I bought an expensive dock cable that has composite out and that does work for video. So, I am just wondering what happened to my video from the headphone jack. I guess I could try to get it fixed, but is it worth it? Any ideas would be appriciated! Thanks!!

OK, I was DETERMINED to figure this one out...simply because it USED to work...
Somehow (last 'update' I assume)...my 'TV out' was turned off.
On my 80GB model, it was under menu > videos > video settings > TV Out
I just turned it 'on' and I was back in business...of course it doesn't make up for last weekend, when I was out of town trying to get the darn thing to work...but at least it works now.
Hope this helps.

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
Chris

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

All headphones give distorted, crackly sound. Sometimes no sound. Headphone jack broken? Apple expresslane support giving a "generic error" message whenever I try to send in for service...

As in the title. For a while the headphone jack is occasionally crackly when the jack moves around in the port. It finally died today when I plugged it in and all the audio is heavily distorted and sometimes cuts out completely. Whenever I try to set up a service with Apple I keep getting this error message:
We're sorry, but we are unable to complete your request at this time.
Please try again in a few minutes or start over now.
I can't get through to the Irish support phone number either, it keeps saying number not recognised. Is there any other way I can send my iphone in for service (closest genius bar is 500km away...)

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

HT201205 How can I connect to a bluetooth devise and use the head phones at the same time? I have a new ipod Touch (32GB)'and want to play through a stereo system using the headphone jack and connect to a blue tooth speaker in another room

How can I

Not possible, there is a physical switch inside the headphone port, when the headphone jack is plugged in the switch is open and disables the iPod speaker and Bluetooth networks. Cheers.

Headphone jack delay

Similar Messages

Maybe you are looking for