Headphone sound option gets stuck even when headphones have been removed.

I use my headphone jack to play music from my pre on my car stereo. My pre is also bluetoothed for phone calls through my vehicle. The phone constantly gets stuck on the headphone option and will not switch to bluetooth even when the jack has been disconected. I then have to shut down the bluetooth and restart it to get the phone to work. What is the point of bluetooth if I have to manually fiddle with it while I am driving. The bluetooth should overide the headphone jack and then drop back to headphone when the call is over. My palm treo had absolutely no problems doing this. I have been complaining about this for awhile now perhaps on the wrong boards, under bluetooth sync problems. Please find a fix for this as it is really anoying.
Post relates to: Pre p100eww (Bell)

Yes I did try that when I had the no sound issue and it fixed it. This is a different issue. The real issue is that I cannot reliably use my bluetooth if I use any other option wether it be headphone or speaker or regular phone for that matter. The phone will get stuck on whatever option was being used and won't go to bluetooth even when you click on it in the phonecall mode. I have been complaining about this from the day I purchased the phone. I had complained about this at an earlier date in the bluetooth syncing issues section of the site not realizing at the time that this is not a sync issue but something else. I should be able to have my headjack plugged in and the bluetooth should overide ride it when a phone call comes in. My palm trio never had this issue and was being used in the same fassion. I really need a fix for this as I am probably in my car most of the time using my Pre exactly as I described to you. Sometimes it works, sometimes it doesn't and I never know when it's going to do it. I use my phone for business so this can also be a bit embarassing when I can't pick up a clients call or I have to hang up on a client because I can't get the phone to switch over. Any help with this would be greatly appreciated.

Similar Messages

Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?, Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
http://www.etresoft.com/etrecheck

Users stills appear to have transactions assigned even though roles have been removed.

Hi,
I'm currently looking at a number of users with access to sensitive transactions (e.g. SCC4).
When looking at a combination of the AGR_ROLES and AGR_TCODES tables I can see there is currently only one active role and one active user assigned this access which would fall in line with what was to be expected based on the population I am looking at (we're not concentrating on auth object level for now).
However when I go through SUIM and filter on users by complex criteria and enter transaction code SCC4, about 20-30 users pop up (this is how many people used to be assigned access to SCC4).
When access was removed for these 20-30 users, it was done at 'role level' so my question is, even if roles have been removed, when looking through SUIM would a user still appear to have transactions associated with that role assigned - if so, why does this happen? I assumed once a role is removed it would removed the underlying transactions etc with it?
My assumption at the moment is that even though SUIM is showing users still have access to SCC4 they can't actually use it as the role it was associated with has been removed.
Any help/clarity on this would be greatly appreciated.

Hi Johnny,
Please do perform the User comparison.
Goto PFCG -> Role Name -> user comparision
then check in SUIM still user is having that Tcode or not .
for detail
Go to SUIM
Roles by complex selection criteria -> put Tcode there
it will give you Roles name having that tcode . and then you go to that Role and you will get list of Users in PFCG (User assignment Tab) .
same goes with User
SUIM - Users by complex selection criteria - > put tcode -> Profiles associated with - > roles assosiated with it .
But i suggest after you make any changes to Role / Profile you please do user comparision .
Regards
Dishant Pathak

Getting letters for items that have been removed from my credit report

I have gotten several credit cards in the past month as I have been working on rebuilding my credit. Over the past few weeks I have been receiving letters from collection agencies for items that have been removed from my credit report. Has anyone else had this issue? Should I just throw this stuff away since it's not longer being reported on my credit report and the collections are so old they've been removed from the report? I am freaking out a bit. Any advice is welcome.

wonderwoman1970 wrote:
They were removed because they are over 8 years old.They can still try to collect, they just cannot place it on your reports. If its also beyond SOL in your state, you have to option to sent them a Cease Communications letter, charmingly refferred to as a FOAD letter. (Google it to find the meaning of that acronym).They will just sell it to another JDB, who may send you another collection notice. Keep all correspondence regarding this debt in order to keep track of it. You also have the option to settle it for a small percentage - I would suggest offering no more than 5-10% of the original amount (not some inflated "new balance"), and in your offer letter refer to it as "old, time barred debt, that is not a current financial obligation" but that you are willing to settle only to close out the account.

I have set up 4 email accounts. Two are gmail and they show only old messages in sent folder - even when messages have been sent from this ipad.

I tried deleting and re-entering the accounts, but problem with sent folder still occurs

I found this in another discussion in the box on the right >>>>> More like this.
Substitute whatever your email account's name is where it states Comcast and see if this helps. The settings would be the same on an IPad as on an iPhone.
Go into Settings>Mail, Contacts, Calendars>and select the Comcast account. From there look at the Outgoing Mail Server. It shoudl list the Comcast SMTP server. Touch that button and it will take you to another settings page for SMTP. It will show you the Primary SMTP server along with other SMTP servers. If the gmail server is listed there, then you can touch on it and turn it off. That should take care of it. The iPhone will try and use the SMTP server you have listed for a particular mail account, however, if that server is unavailable, it will take the next one on the SMTP list until it gets to one it can use.

Key Stuck - *EVEN WHEN NO KEYBOARD CONNECTED*

Hello
The up cursor on the keyboard is stuck on.
But it stays stuck even when no keyboard is connected at all.
i.e. if you use the mouse to open a menu, the options will highlight from the bottom up.
If you type a document the cursor will keep flying back to the top.
It's impossible to enter any passwords as the invisible keystrokes of the up cursor seem to make it invalid.
It's exactly if something was resting on the keyboard.
I"ve tried different keyboards, including a BlueTooth one, so that rules out the connections.
And As I say it persists even when the keyboard and mouse are entirely disconnected.
It is still on when I startup from a bootable CD.
It feels as if some sort of hardware problem has occurred...
I've tried resetting the PRAM but as the keyboard doesn't function correctly, I can't use the startup shortcut.
I've unplugged mains power and removed the battery and pressed the PMU reset button, but to no avail.
I've started up from an OSX Leopard disk, but the problem persists.
This is driving me crazy, any ideas?

yes, I've tried with 2 different mice, and with no mouse connected.
Even restarted from an install CD with no keyboard or mouse connected at all, cursor is still jumping upwards, and the repeating chime that you get when the keyboard buffer is full (like when you acidentally rest something on a key) is constantly sounding.
It feels to me as if there is some false signal getting to the keyboard buffer that the computer is interpreting as a constant up arrow key press.
Any ideas? Is there a part of the internals of the computer that I should check hasn't come loose in some way, triggering this false key input?
The problem happened after I moved the computer from one part of the office to another.

Sound keeps getting stuck

when i try to play a mov file which i uploaded from my iphone 4s the sound keeps getting stuck. when i play it on my iphone its fine but playing it on quicktime the sound keeps getting stuck. ive even tryed some of my old mov from the same phone and there doing it as well

please contact me on [email protected]

When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves

When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves. It finished backing up one then it went to a "Extracting Software" on the iTunes status bar up top and then it gave me an error saying something along the lines of "There was an error with the server" and back to square 1. Ive been trying since the morning and same problem. Always stuck on the backup, help?

You may have lost your connection to the apple server or connection with your itunes library.
1) You will need to shutdown Itunes and disconnect your iphone from the USB cable.
2) Reconnect your Iphone to the usb cable, wait for the device to be recognised and or drivers to be installed.
3) once all ok, your itunes should automatically open up/connect (if you have this setting set on), otherwise double click your itunes icon on your desktop.
4) once all sychronised and connected. go to Summary tab and UPDATE your iphone again.
Hope this works for you, as this happend to me and tried the above steps and wala!!! all good.
If the above still fails, restart your pc/apple and turn off/on your modem and then try again.
this normally happens if your connection from your device to the itunes hangs or looses its connection, or have a bad connection to the internet / apple server.
in windows the RPC Locator is normally the cause of this, in apple i have no idea (as im not an apply user).
Give it a shot!
if this helps you and works ...why not rep/like my response up!

My 3 GS has been working fine for the last two years or so but recently it has been getting "stuck" frequently when I try to do various things - answer a phone call, switch screens, go to my mail, etc.

My 3 GS has been working fine for the last two years or so but recently it has been getting "stuck" frequently when I try to do various things - answer a phone call, switch screens, go to my mail, etc.

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

Schedule lines getting created even when material is there in stock

Hi Friends,
I have configured a normal material and have sufficient stock also, but when I am creating a sakes order the system is generating schedule line for the material even when I have stocks.
Can someone please advice what could be the problem and the possible solution.
Regards,
Wasim.

Dear wasimuddin.sayed,
When you are creating sales order definitely system will create the schedule line for Confirm delivery date and delivery QTY.
that is the functionality of schedule line.
now if you don't have stock at plant level on the same date then as per availability configuration system will confirm the another schedule line on which confirm delivery date and qty will be available.
if not satisfy the answer request you to elaborate the question in detail.
Best Regards
Hanumant

Schedule line getting created even when material is in stock

Hi Friends,
I have configured a normal material and have sufficient stock also, but when I am creating a sales order the system is generating schedule line for the material even when I have stocks.
Can someone please advice what could be the problem and the possible solution.
Regards,
Wasim.

Dear wasimuddin.sayed,
When you are creating sales order definitely system will create the schedule line for Confirm delivery date and delivery QTY.
that is the functionality of schedule line.
now if you don't have stock at plant level on the same date then as per availability configuration system will confirm the another schedule line on which confirm delivery date and qty will be available.
if not satisfy the answer request you to elaborate the question in detail.
Best Regards
Hanumant

HT201359 When you have been charged twice for same item, how do you get your money back?

When you have been charged twice for same item, how do you get your money back?

Morning Domangere,
Thanks for using Apple Support Communities.
Following this article refund will be an option.
For more information on this, take a look at this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best of luck,
Mario

WHY does the finder insist on rearranging the files in a folder in alphabetical order even when I have selected "none" in the preferences for file organization?

WHY does the finder insist on rearranging the files and/or documents in a folder in alphabetical order even when I have selected "none" in the preferences for file organization? Even after I numbered the documents/folders to keep them in my preferred order, it will still displace them occasionally. This is becoming increasingly frustrating!
Is this a "Pages" issue or "FInder"? The vast majority of documents I use are in Pages, but there are also Numbers, PDFs, jpegs and a few other applications involved. This never happened before I upgraded to Mountain Lion; in Tiger, the documents (mostly Appleworks) and files stayed where I wanted them to be.
I am visually oriented, and prefer to arrange items in a folder in an order that makes them easier for me to access, which is often NOT alphabetical.
Can anyone suggest a solution? Please??
Thank you.
Sara

nbar,
Thank you for your reply.
However, I do not understand what you mean by "user account." I am the only user, and can find no options for "user" or "guest." The parental controls have always been off, as there are no other people who have access to my computer.
Frank,
Thank you for your reply.
All my documents, files and folders are in icon view, Arranged By: none in both view and view options. This arbitrary rearranging does not happen all the time, only when I make a substantial change to one of the documents in the file or folder. I'm not sure what you mean by "column heading."
MichaelLAX,
Thank you for your reply.
I know, to my sorrow, that Appleworks does not work with Mountain Lion. I spent at least three months converting approximately 2,000 Appleworks documents to Pages, Numbers, Bento (for databases) and Touchdraw (for drawings). So this is not the problem; but as I said, I did not have this rearranging problem with Appleworks - the icons stayed where I wanted them to be. I still miss the ease and reliability of Appleworks, darn it!
Frank,
Thank you for your second reply.
I do have the Sort By: in view options as well as in view set to "none." The finder still insists on rearranging, but only when I have made a substantial change to a document in that file or folder.
Any futher thoughts?
xdab,
Thank you for your reply.
"Are you are using icon view, but for some reason the finder moves files around? is that the problem?"
YES!! This is exactly the problem.
"If this operation is successful then erase the original and rename the new one to the name originally chosen by the user."
This seems like a lot of trouble, especially as I often work on several documents at the same time.
"By the way, the finder has a "clean up by" menu that rearranges icons in one of the standard orders, there are shortcuts that produce the same effect, for example <option><cmd>1 sorts them by name. Is it possible that this shortcut was typed by mistake without you noticing?"
I do know about this "clean up by" option, and avoid it like the plague! So I doubt this is the issue, and I infrequently use keyboard shortcuts like this anyway.
Thanks all who replied. None of the suggestions seem to work, however. Any others out there?
Regards,
Sara

Latest Software of iOS 7.0.3 Wont install even when I have deleted all applications.I don't want to buy more memory

Latest Software of iOS 7.0.3 Wont install even when I have deleted all applications.I don't want to buy more memory as I have already done.

What model iPad and what iOS version is it currently running?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Sometimes when I open Calendar, it is blank even when I have entered appointments. What must I do?

Sometimes when I open Calendar, it is blank even when I have entered appointments. When this happens, I tap calendars and tap hide all calendars and then tap show all calendars and mt appointments appear. How do I get the Calendar app to show my appointments without going through this extra step? Thanks

Close All Open Apps... Perform a Reset... Try again...
Reset
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Headphone sound option gets stuck even when headphones have been removed.

Similar Messages

Maybe you are looking for