Health Monitoring and Restart Configuration with Node Manager

We have a WL 9.2.2 instance setup using Node Manager to control it. It contains a JMS server with a persistant store that is in an oracle database. If the Oracle database becomes unavailable, the Weblogic server throws a number of errors eventually leaving the Managed Server in a "FAILED" state. I configuring/activated the following "Configuration - Health Monitoring" options for the managed server to have it automatically recover from this situation:
Health Check Interval: 180
Auto Kill If Failed: Checked
Auto Restart: Checked
Max Restarts Within Interval: 2
Restart Delay Seconds: 0
However it is not automatically restarting, even though the server shows in a "FAILED" state.
1st question: Do I need to restart the server with the settings above to have it react to the FAILED state? I would think that 3 minutes after I configured the above it would begin a restart on the FAILED server, but that does not happen
I also note on the "Configuration - OverLoad" page, there is a setting for "Failure Action:" that can be set to "Ignore, take no action" or "Force Immediate Shutdown of this server" I did configure/activate this for "Force immediate Shutdown..." but again the currently FAILED server does not restart.
2nd question: Does this "Configuration - Overload- Failure Action" setting override or effect in any way the configuration of restart on the "Configuration - Health Monitoring" page?
3rd question: Same as 1st question but for these Overload settings: Do they require a full restart of the managed server to somehow take effect?

Have you set the field : CrashRecoveryEnabled=true in file : ..\bea\weblogic92\common\nodemanager\nodemanager.properties ?

Similar Messages

Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

Hi
Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
There are two situations where you can use this depending on the type of client:
1. To keep inventory reports on a client (that is not an MP), create the following file:
%systemroot%\ccm\inventory\temp\archive_reports.sms
2. To keep inventory reports on a MP (that is also a client), create the following file:
<x>:\sms_ccm\inventory\temp\archive_reports.sms
The XML file will be saved in the inventory\temp folder.
More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

Solution Monitoring configuration with solution manager 4.0

Hi Friends,
I have to the Solution Monitoring configuration with solution manager 4.0.
Please provide steps or screen shot if any body having that.

Hi,
Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
This will solve your problem.
Feel free to revert back.
--Ragu
Message was edited by:
Raguraman C

Registering with the WebEx Data Center and the Cisco WebEx Node Management System

Dear guys, ...
Please help,
i want to implement to webex node ASR1000, i have read in "Configuring the Cisco Webex Node for ASR 100.pdf", there is prerequisites to implement it, that is "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"
Can someone tell how to "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"
Are there any step by step documentation to "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"?
Thank you
BR

You should have received a PAK Key with your order. Go to Cisco licensing and enter the PAK Key as this will start the process. Once the PAK Key is validated a screen will be displayed to enter your request for ASR 100 integration. It normally takes a few days to a couple of weeks to get the information back from WebEx needed to configure your ASR.
If you did not get a PAK Key contact your WebEx rep to get the process started to integrate your ASR to your WebEx site.
Hope this helps
John

Any Guidelines on Configuring Weblogic 8.1 with Node Manager

Hi All, I want to configure Weblogic 8.1 with Node Manager using 4 ports. Is there any step by step guide? Please let me know...
Currently I am referring to this link:
http://download.oracle.com/docs/cd/E13222_01/wls/docs81/adminguide/nodemgr.html
Thanks.

Hi,
Hope the below link may be little helpful: http://middlewaremagic.com/weblogic/?p=971
NOTE: you need not to follow Step8). mentioned in above link because.... WLS8.1 nmEnroll() is not available as part of WLST ...In WLS8.1 no need to start the NodeManager. You can also ignore the Clustering part in the above link ...rest all you need to follow.
Thanks
Jay SenSharma

[wls8.1 sp.3] cannot remote start with node manager on another server

In this domain run on 2 physical servers in windows 2003. In machine that has admin server can start with node manager but another machine without admin server cannot remote start . when i remote start , the node manager has facing error messages as below:
# AT "node manager monitoring" in weblogic admin console
[[NodeManager:300033]Could not execute command ping on the node manager. Reason: weblogic.nodemanager.NodeManagerException: [CommandInvoker: Failed to send command: 'ping to server 'null' to NodeManager at host: 'xxx.xxx.xxx.24:5555' with exception Connection reset by peer.. Please ensure that the NodeManager is active on the target machine].]
# AT "nodemanger.log" has facing error messages as below:
<Aug 20, 2008 7:34:07 PM ICT> <Info> <[email protected]:5555> <NodeManage r started, log messages being written into file C:\bea\WEBLOG~1\common\NODEMA~1\ NodeManagerLogs\NodeManagerInternal\nm_server02_08_20_2008-19_34_03.log>
<Aug 20, 2008 7:59:58 PM ICT> <Warning> <Security> <BEA-090476> <Invalid/unknown SSL header was received from peer server01 - 10.208.50.23 during SSL handsha ke.> <Aug 20, 2008 8:00:11 PM ICT> <Warning> <Security> <BEA-090476> <Invalid/unknown SSL header was received from peer server01 - xxx.xxx.xxx.23 during SSL handsha key.>
I would REALLY appreciate any suggestions as to what might be the cause or what i could try.
Thanks ....

Hi,
It is up to you to decide whether you want to use nodemanager or not.
It does not make any difference if the server is started via script or nodemanager.
if i want everything (AS, MS, and NM) to come up at server boot i need to set each of them up as windows services (which is what i have at the moment) but this wont allow me to use the node manager ==> Yes this statement is correct.
You can either set AS and MS as windows service (or) AS and nodemanager as service.
Thanks,
Sharmela

Starts servers with node manager

How to configure the node manager to start admin server and SOA services in the background in linux.

How to configure the node manager to start admin server and SOA services in the background in linux.

Monitoring and Restarting Message interfaces using APIs

Hello Experts,
My requirement is to monitor and restart Message interfaces from a WD Application.So i need some APIs that can be called for the same.
From RWB, we can restart and manage(view status details) of messages. Is there any way to do that from a Dynpro application.Any APIs or servlets?
Regards
Dhanya

Hi
A starting point might be to have a look at the API's:
http://help.sap.com/javadocs/pi/SP3/xpi/index.html
there looks like there are some related to Messaging !
or all the API's - http://help.sap.com/javadocs/
Thanks
Damien

IDOC and ALE Configuration with cross application with SD

Hi Sap Gurus,
Please send me some document on IDOC and ALE Configuration with cross application with SD.
Please send me the material on my mail id [email protected]
Regards
shekhar

Dear Shekhar,
concerning EDI concept in SD: the EDI concept is intended to realize the sales and distribution process completely automatically with the help of electronical documents. These documents are sent from one customer to another, are processed mostly on the background and give a possibility to realize the sales process extremely efficiently.
If MM-customer would like to purchase the goods then he creates the IDOC of type ORDERS and send it to SD-customer. On the SD-side the IDOC is processed via the function module IDOC_INPUT_ORDERS and creates the sales order. As confirmation the SD-side can send to MM-side the Order-Response IDOC (function IDOC_OUTPUT_ORDERS). The MM-customer can every thime send a change to the existiong order, then on SD side the ORDCHG IDOC will be processed. It can change the order like in VA02. The creation of the invoice can be made via IDOC of message type INVOIC (function IDOC_OUTPUT_INVOIC).
So, the process can be realized completely automatically between SD and MM partners with the help of IDOCs: ORDERS, ORDCHG, ORDRSP, INVOIC.
That's all concerning the SD-EDI.
Additional processes in SD, where EDI are used:
1) application of delivery schedules to the scheduling agreement: IDOC of type DELINS
2) creation of a delivery order to the scheduling agreement: IDOC of type DELORD
3) creation of external agent service delivery to scheduling agreement: IDOC of type EDLNOT
4) creation of credit advice / credit memo in the frames of self-billing: IDOCs of type GSVERF, SBWAP and for external invoice creation SBINV.
It is all processes which are realized in the SD module via EDI.
I hope this info helps.
Kind regards,
Akmal Vakhidov
Development Support SAP, Walldorf/Germany

My ipad has stopped updating apps. It doesn't even ask for password, it just oges to the apps screen showing empty progress bars. I've re-synced account and restarted but with no luck. Other than deleting the apps is there anyway around this?

My ipad has stopped updating apps. It doesn't even ask for password, it just oges to the apps screen showing empty progress bars. I've re-synced account and restarted but with no luck. Other than deleting the apps is there anyway around this?

OK. I will work backwards.
You certainly don't want to have to delete apps every time that they need an update, for any number of reasons. Losing data first and foremost would be a drag, but the overall hassle would be absurd. All things being equal, you should be able to update apps in the future after you delete them and reinstall them. I delete and reinstall apps all the time and I am also able to update them when updates are available for the apps. I just wanted to know if you had any success in any fashion installing apps.
Resyncing/refreshing the Apple ID/iTunes account wouldn't seem to be the issue either if you can download apps or other content from the iStores. Your ID is being accepted.
That leaves us with I'm not sure what. But I think I would try this trick fix and see if it helps.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.

CCMS Configuration - Central Monitoring and Email Alerts with Solution Mgr

I am trying to configure my CCMS alerts on my satellite systems to be linked into the Solution manager system (acting as the CEN monitoring node). If I have already setup my RZ20 alerts, is there a way I can just link these into Solution Manager.
Thanking you for your suggestions

Try setting up the monitoring RFC connections in SMSY. Once those are setup, you can pull the CCMS data in and view within tran SOLUTION+MANAGER.
If you need more detail, just update this message.
Thanks,
J. Haynes

Timezone issue with Node manager

Hi
We have a strange problem in our Weblogic manager server as below.
We started the manage server & Node manager in Jan 2011, when the daylight saving was on., then when time zone changed to winter time to summer time, node manager was unable to pick the time zone change.
It was still printing log files with wintertime in April 2011.
But after we restart the node manager & manage server, we found that then it has pick the summer time.
So want to know how to avoid such problems, that node manager & manage server should pick the current timezone (even when it change to summer to winter or vice versa) without restarting the servers.
Please can anyone guide me on this such strange problem & solution of it.
regards,
jay

Hi
My OS is Linux box and is able to pick the time correctly, but nodemanager & manage server which are started before time zone change is not able to pick the timezone change and continue running with timezone where it has started and the same time OS (date command) shows that it is changed to summer time.
Do i need to specify any configuration for nodemanger & manage server for picking the time when time zone is changed.
regards,
Jay
Edited by: user13160729 on May 23, 2011 11:07 PM

Not able to start SOA managed server first time with node manager by WLST

Hi all,
I have created a SOA11g domain. Then using WLST utility I have started the Node Manager.
Then from WLST prompt I have connected to the Node Manager & started the Admin Server successfully.
But when ever I am starting the SOA manager server using WLST it's throwing the following error in WLST page : -
Error Starting server soa_server1: weblogic.nodemanager.NMException: Exception while starting server 'soa_server1'
In server log file I am getting the following error : -
Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
weblogic.security.SecurityInitializationException: Authentication for user denied
I am getting this problem only when I am trying to start the domain for the first time after domain creation using WLST/nodemanager.
If I start & stop the SOA managed server from EM console & then try to start it aging from WLST/NodeManager then it's work fine.
Can anyone please tell me what can be the issue?
Thanks in Advance!!!
Edited by: 008 on Dec 6, 2012 7:53 PM

Hi,
I am getting this problem only when I am trying to start the domain for the first time after domain creation using WLST/nodemanager.
If I start & stop the SOA managed server from EM console & then try to start it aging from WLST/NodeManager then it's work fine.When you a server for the first time by using console or startManagedWeblogic.cmd, a file boot.properties is created under %DOMAIN_HOME%\servers\soa_server2\data\nodemanager...
The WLST/Nodemanager approach doesn't create the file so it won't work for the first start... But it will work just fine from the second on...
I've never tried, but you can try and create the boot.properties manually in your script with the following content... Password should be encrypted after the first successful start...
username=type-the-username-here
password=type-the-password-here
Cheers,
Vlad

Weblogic 8.1 Enable Load Balancing with Node Manager

Hi All,
Please provide any guidelines on how to enable Load Balancing in Bea Weblogic 8.1
I have configured *1 Admin Server* with *4 Managed Servers* on a single machine each having different port.
I want to setup load balancing such that any 1 of 4 ports responds when a central URL is clicked by the user.
Any guidelines are welcome.

Review the document How to Implement Load Balancing on SAP BusinessObjects Planning and Consolidation, version for SAP NetWeaver

Server stop problem with node manager

Hi ,
I get this error often when I try to stop a managed server via the nodemanager
from the admin console or from the weblogic.Admin command. The server does not
stop and it goes into an unknown state and I have to do a force shutdown
[java] Error: [Could not execute command shutdown for server xxx via the N e Manager
- reason: [__COMMAND_EXCEPTION__Request: failed to execute command ' utdown' on
server 'xxx - reason: '[Unable to send shutdown request to server.> ].]
[java] Start server side stack trace: [java] weblogic.nodemanager.NodeManagerException:
[Could not execute comman shutdown for server xxx via the Node Manager - reason:
[__COMMAND_EXCEPTION__ quest: failed to execute command 'shutdown' on server 'xxx
- reason: '[Unable o send shutdown request to server.]'> ].] [java] at weblogic.nodemanager.NodeManagerRuntime.executeCommand(NodeMa
gerRuntime.java:472) [java] at weblogic.nodemanager.NodeManagerRuntime.shutdown(NodeManagerR
time.java:86) [java] at java.lang.reflect.Method.invoke(Native Method) [java]
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(D amicMBeanImpl.java:732)
[java] at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicM anImpl.java:714)
[java] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl ava:1557)
[java] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl ava:1525)
[java] at weblogic.management.internal.RemoteMBeanServerImpl.invoke(Rem

Hi Anil,
A little more information might be helpful. Which version are you talking
about ? What is the server state when you issue the command ? Is the server
very busy. Are you able to get the server state from the nodemanager when
the server is running ? Are you able to communicate from admin server ->
nodemanager <-> managed server ?
cheers,
gaurav.
"Anil Jacob" <[email protected]> wrote in message
news:3fb16b7c$[email protected]..
>
Hi ,
I get this error often when I try to stop a managed server via thenodemanager
from the admin console or from the weblogic.Admin command. The server doesnot
stop and it goes into an unknown state and I have to do a force shutdown
[java] Error: [Could not execute command shutdown for server xxx via the N
e Manager> - reason: [__COMMAND_EXCEPTION__Request: failed to execute command 'utdown' on> server 'xxx - reason: '[Unable to send shutdown request to server.> .]
[java] Start server side stack trace: [java]weblogic.nodemanager.NodeManagerException:
[Could not execute comman shutdown for server xxx via the Node Manager -
reason:> [__COMMAND_EXCEPTION__ quest: failed to execute command 'shutdown' onserver 'xxx> - reason: '[Unable o send shutdown request to server.'> ].] [java] atweblogic.nodemanager.NodeManagerRuntime.executeCommand(NodeMa
gerRuntime.java:472) [java] atweblogic.nodemanager.NodeManagerRuntime.shutdown(NodeManagerR
time.java:86) [java] at java.lang.reflect.Method.invoke(Native Method)[java]
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DamicMBeanImpl.java:732)
[java] at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicManImpl.java:714)
[java] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImplava:1557)
[java] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImplava:1525)
[java] at weblogic.management.internal.RemoteMBeanServerImpl.invoke(Rem

Health Monitoring and Restart Configuration with Node Manager

Similar Messages

Maybe you are looking for