Hello, I currently have a MacBook snow leapord and i'm trying to connect it with my Canon MP560 printer, i put in the CD and installed everything properly but now when i add a printer it says a Queue already exists, i click continue and nothing happens???

Hello,
I'm using a MacBook Snow Leapord and I'm trying to connect it with my Canon MP560 printer/scanner.
I installed the CD and followed along with the manual and did everything it asked, at the end it told me it was finished.
So then I went to go print something and an error had occured so i went to the file menu on Microsoft Word for
Mac and clicked Print/Add Printer and then i click on the Canon MP560 series-1 as it was the only one to click on.
When I did it stated that I already has a Queue for this printer and if I'd like to add a new one so I clicked continue and nothing
had happend. PLEASE HELP
sincerely,
Laura.

I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
But, before doing this, download the last good driver, CDs usually contain outdated drivers.

Similar Messages

I currently have OS X Snow Leopard and want to Update to OS X Lion, but it says that it is no longer available for purchase. Do I have to go straight to Mountain Lion?

I currently have OS X Snow Leopard and want to Update to OS X Lion, but it says that it is no longer available for purchase. Do I have to go straight to Mountain Lion?

If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions. The cost is $29.99 (as it was before) plus tax. It's a download.
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

I have an iPod touch and also have the iHome.... When I first hooked it up it played music fine.....but now when I hook it up it says accessory unavailable for iPod touch and I've resetted it 2 times but still no music comes thru the iHome speakers

I have an iPod touch and also have the iHome.... When I first hooked it up it played music fine.....but now when I hook it up it says accessory unavailable for iPod touch and I've resetted it 2 times but still no music comes thru the iHome speakers

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
If your iPod is defective and not abused Apple will exchange it at no cost.
Apple Retail Store - Genius Bar

I just installed MacOS X Yosemite on my MacBook Air 2011. After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes. How do I fix this problem?

I just installed MacOS X Yosemite on my MacBook Air 2011. After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes. How do I fix this problem?

If you use a trackpad and don't want to switch to a mouse, you can uninstall and reinstall all day long and will still have problems, but if you really want to try it, you can download PSE 12 here:
Download Photoshop Elements products | 12, 11, 10

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my p

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work. The message appears "building criteria" and I get an endless loop on the lower left panel. How do I correct?

You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.

I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

Hi...
Try restarting the AMDS > How to restart the Apple Mobile Device Service (AMDS) on Windows
iCloud system status reports everything green > Apple - System Status

HT5706 I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any help?

I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?

Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer.

HT1338 i currently have a macbook 2.1 and want to update. what can it support? I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account.

i currently have a macbook 2.1xersion 10.6.8 and want to update. what can it support? Everything i try, it won't support! I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account. Can anyone give me some advice besides buying a newer laptop?

Lion 10.7.5 is as far as you can go. You must have at least 2 GBs of installed RAM.
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. Or you can order directly on the online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

What is the WPS button on my access point? I am trying to setup wirelessly with a canon MX892 printer

Printer setup instructions say to press the WPS button on the access point (my 4th gen Time Capsule). Does that mean hit reset and will I have to setup every other device again by doing that?

No, do not hit reset .. it is not a WPS button.
Apple products do not use WPS, so no WPS button is needed. And they have no need to implement one.. nothing exists outside the Apple bubble.. didn't you know that??
Read the forum expert Tesserax instructions for using WPS. https://discussions.apple.com/message/16034147#16034147
But it is better to plug in your printer to a mac by usb and use the disk provided to do a full manual setup of wireless.. WPS is simply the easy way.

HT204380 I've used FaceTime before but now when I turned it on it says activation

I have used FaceTime plenty of times but I just tried and FaceTime was off. So I turned it back on & it just says 'waiting for activation' what do I do?

Firefox is already running but is not responding
* https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding
Profile in use
* http://kb.mozillazine.org/Profile_in_use
Check and tell if its working.

In Photoshop CC timeline, when I add an audio track photoshop CC either quits working or it skips to the end of the video clip. If I just put in audio it works fine. If I just put in clips or pics it works fine, but now when audio is added

When I try to use the timeline portion of photoshop, I can't get the audio to work with my clips. I can get audio to work fine when using just audio, but the minute I try to add audio to a set of clips either photoshop quits working or it skips to the last clip in my show. I don't understand why this happens. I am using the same track each time. Very frustrating.

Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

HT4061 hi i have an i phone 3 and nothing happened to it it just wont connect to my itunes or restore

i have an iphone 3 an everything was workin fine an one day i connected to itunes an all went blank. so all i have now is the connect sign. wont do anything else

What is the EXACT message you get?
Was the phone ever jailbroken or "unlocked" by anyone other than the original carrier?

Mac OS X v 10.6.7 and Canon MP560 printer

Hi,
I just bought a brand new iMac and cannot for the life of me connect it to my Canon MP560 printer, I have installed pretty much all of the drivers on the canon support site but I have no idea how to get it working!
Thanks,
Cassidy
Message was edited by: cassierae
Message was edited by: cassierae

Well that certainly is the correct path to the networked printer. So with this queue not printing then this is a concern.
There are several things I suggest you do if you haven't already.
1. Turn off the power to the MP560 and unplug the power cord for 1 minute. Then reconnect the power cord and turn it back on again.
2. Open Print & Fax and delete the MP560 network printer. Highlight the printer in the list and then press the minus button to remove it.
3. With Print & Fax still open, move the mouse to the printer list and Control-click. Click the menu Reset printing system. This will delete all printers and scanners in Print & Fax, so if you have other printers or scanners that are still working fine then you may not want to perform this step.
4. Restart the Mac
5. With the Mac restarted and connected to your wireless network, open Print & Fax and click the + button to add a printer. With the Default view displayed the MP560 should be seen - once as a scanner (showing Bonjour Scanner in the Kind column) and after a few seconds it will also show as a printer (showing canonijnetwork in the Kind column). Select the printer entry and ensure the Print Using menu changes to Canon MP560 series. Click Add to complete the print queue creation.
6. Try to print to this newly created queue.
7. Cross your fingers
8. Scream for joy when the printer starts to print or curse and reply to me when it doesn't....

I have different music files all over three computers. Everytime I connect my iPod to one of these computers it transfer the music files from that computer but delete the music files that I already have in my iPod. I want all my music in my iPod.

I have different music files in three computers.
Everytime I connect my iPod into one of these computers it transfer the music files from that computer but delete the music files that I already have in my iPod.
I want all my music in my iPod.
What I need to do?
Thanks!

I haven't researched it and I don't claim to know everything about iTunes, but it has always been my understanding that you can only use one computer per iPod, but you can have multiple iPods per computer. From what I understand, this is to prevent illegal sharing and whatnot.

Hello Everyone, I have a MacBook older model with me.I am running 10.7.6 on that, I was trying to use BootCamp to install windows on my mac. Since BootCamp can only work on a single Volume, I partitioned my Hard Disk to one volume. Using BootCamp I

Hello Everyone,
I have a MacBook older model with me.I am running 10.7.6 on that, I was trying to use BootCamp to install windows on my mac. Since BootCamp can only work on a single Volume, I partitioned my Hard Disk to one volume.
Using BootCamp I installed windows and everything worked fine. After installing windows and testing everything, I switched back to OS X and this time I tried to make another partition on my single portioned Mac volume and named it Backup. That too worked. Now I have three Volumes
1)Development2)Backup3)BootCamp.
Next when I switched to Windows, It should the classic error, No Bootable device found, please insert a Bootable CD and press any key. When I tried to enter my Mac OS X install DVD and by pressing option key, it does not show me the proper Mac OS X development volume. It keeps going back to the No bootable device found message.
Any help will be much appreciated
Regards
Mithun

you can't add a partition in between - you put Windows to a new partition number.
GPT (GUID)
EFI
Mac HFS
Lion Recovery
Windows
And now you have two HFS
One partition and one Windows (plus Lion Recovery).
If you were to have more, it can't be before Windows for one thing.

Hello, I currently have a MacBook snow leapord and i'm trying to connect it with my Canon MP560 printer, i put in the CD and installed everything properly but now when i add a printer it says a Queue already exists, i click continue and nothing happens???

Similar Messages

Maybe you are looking for