Help/contents doesn't always display when using Vista

Hi,
On a fresh startup of Lookout 6.1 on Vista, the help/contents always starts as expected. At a later time and for some unknown reason, the help/contents may not display. Is this a know problem and what is the solution?
Regards,
Joe C.

It's an unknown issue. Are you using Vista SP1?
You can find lookout.chm in lookout folder. Try to directly open this file.
Ryan Shi
National Instruments

Similar Messages

My track pad on my air doesn't always respond when using firefox and trying to scroll up or down in the page

when in firefox my track pad doesn't always respond when I want to use fingers to scroll up or down in the screen...any thoughts?

it is possible that zoom maybe enabled i think double taping with three fingers should disable it.
or you can go into settings>general> assessability> zoom and turn it off.
hope this helps

TTL specified in put operation doesn't always work when using write-behind

I'm using a distributed cache with a write-behind cache store (see the config below). I found that when I do something like myCache.put(key, value, ttl), the entry survives the specified ttl. I tried doing the same with a distributed cache with a write-through cachestore and there everything does happen correctly.
Is this sort of operation not permitted in caches containing a write-behind cachestore? If not wouldn't it be better to throw an UnsupportedOperationException.
I created a small test to simulate this. I added values to the cache with a TTL of 1 to 10 seconds and found that the 10 second entries stayed in the cache.
Configuration used:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
     <caching-scheme-mapping>
          <cache-mapping>
               <cache-name>TTL_TEST</cache-name>
               <scheme-name>testScheme</scheme-name>
          </cache-mapping>
     </caching-scheme-mapping>
     <caching-schemes>
          <distributed-scheme>
               <scheme-name>testScheme</scheme-name>
               <service-name>testService</service-name>
               <backing-map-scheme>
                    <read-write-backing-map-scheme>
                         <internal-cache-scheme>
                              <local-scheme>
                                   <service-name>testBackLocalService</service-name>
                              </local-scheme>
                         </internal-cache-scheme>
                         <cachestore-scheme>
                              <class-scheme>
                                   <scheme-name>testBackStore</scheme-name>
                                   <class-name>TTLTestServer$TestCacheStore</class-name>
                              </class-scheme>
                         </cachestore-scheme>
                         <write-delay>3s</write-delay>
                    </read-write-backing-map-scheme>
               </backing-map-scheme>
               <local-storage>true</local-storage>
               <autostart>true</autostart>
          </distributed-scheme>
     </caching-schemes>
</cache-config>Code of test:
import java.util.Collection;
import java.util.List;
import java.util.Map;
import java.util.concurrent.Callable;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.ExecutorService;
import java.util.concurrent.Executors;
import java.util.concurrent.Future;
import org.joda.time.DateTime;
import org.joda.time.Duration;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
import org.springframework.util.StopWatch;
import org.testng.annotations.BeforeClass;
import org.testng.annotations.Test;
import com.google.common.collect.Lists;
import com.tangosol.net.CacheFactory;
import com.tangosol.net.NamedCache;
import com.tangosol.net.cache.CacheStore;
@Test
public class TTLTestServer
     private static final int RETRIES = 5;
     private static final Logger logger = LoggerFactory.getLogger( TTLTestServer.class );
     private NamedCache m_cache;
      * List of Time-To-Lives in seconds to check
     private final List<Integer> m_listOfTTLs = Lists.newArrayList(1, 3, 5, 10);
      * Test is done in separate threads to speed up the test
     private final ExecutorService m_executorService = Executors.newCachedThreadPool();
     @BeforeClass
     public void setup()
          logger.info("Getting the cache");
          m_cache = CacheFactory.getCache("TTL_TEST");
     public static class TestCacheStore implements CacheStore
          public void erase(Object arg0)
          public void eraseAll(Collection arg0)
          public void store(Object arg0, Object arg1)
          public void storeAll(Map arg0)
          public Object load(Object arg0)
          {return null;}
          public Map loadAll(Collection arg0)
          {return null;}
     public void testTTL() throws InterruptedException, ExecutionException
          logger.info("Starting TTL test");
          List<Future<StopWatch>> futures = Lists.newArrayList();
          for (final Integer ttl : m_listOfTTLs)
               futures.add(m_executorService.submit(new Callable()
                    public Object call() throws Exception
                         StopWatch stopWatch= new StopWatch("TTL=" + ttl);
                         for (int retry = 0; retry < RETRIES; retry++)
                              logger.info("Adding a value in cache for TTL={} in try={}", ttl, retry+1);
                              stopWatch.start("Retry="+retry);
                              m_cache.put(ttl, null, ttl*1000);
                              waitUntilNotInCacheAnymore(ttl, retry);
                              stopWatch.stop();
                         return stopWatch;
                    private void waitUntilNotInCacheAnymore(final Integer ttl, final int currentTry) throws InterruptedException
                         DateTime startTime = new DateTime();
                         long maxMillisToWait = ttl*2*1000;     //wait max 2 times the time of the ttl
                         while(m_cache.containsKey(ttl) )
                              Duration timeTaken = new Duration(startTime, new DateTime());
                              if(timeTaken.getMillis() > maxMillisToWait)
                                   throw new RuntimeException("Already waiting " + timeTaken + " for ttl=" + ttl + " and retry=" + currentTry);
                              Thread.sleep(1000);
          logger.info("Waiting until all futures are finished");
          m_executorService.shutdown();
          logger.info("Getting results from futures");
          for (Future<StopWatch> future : futures)
               StopWatch sw = future.get();
               logger.info(sw.prettyPrint());
}Failure message:
FAILED: testTTL
java.util.concurrent.ExecutionException: java.lang.RuntimeException: Already waiting PT20.031S for ttl=10 and retry=0
     at java.util.concurrent.FutureTask$Sync.innerGet(Unknown Source)
     at java.util.concurrent.FutureTask.get(Unknown Source)
     at TTLTestServer.testTTL(TTLTestServer.java:159)
Caused by: java.lang.RuntimeException: Already waiting PT20.031S for ttl=10 and retry=0
     at TTLTestServer$1.waitUntilNotInCacheAnymore(TTLTestServer.java:139)
     at TTLTestServer$1.call(TTLTestServer.java:122)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)I'm using Coherence 3.4.2.
Best regards
Jan

Hi, still no luck. However, I noticed that setting the write-delay value of the write-behind store to 0s or 1s, solved the problem. It only starts to given me "the node has already been removed" excpetions once the write-delay value is 2s or higher.
You can find the coherence-cache-config.xml below:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
     <caching-scheme-mapping>
          <cache-mapping>
               <cache-name>TTL_TEST</cache-name>
               <scheme-name>testScheme</scheme-name>
          </cache-mapping>
     </caching-scheme-mapping>
     <caching-schemes>
          <distributed-scheme>
               <scheme-name>testScheme</scheme-name>
               <service-name>testService</service-name>
               <backing-map-scheme>
                    <read-write-backing-map-scheme>
                         <internal-cache-scheme>
                              <local-scheme>
                                   <service-name>testBackLocalService</service-name>
                              </local-scheme>
                         </internal-cache-scheme>
                         <cachestore-scheme>
                              <class-scheme>
                                   <scheme-name>testBackStore</scheme-name>
                                   <class-name>TTLTestServer$TestCacheStore</class-name>
                              </class-scheme>
                         </cachestore-scheme>
                         <write-delay>2s</write-delay>
                    </read-write-backing-map-scheme>
               </backing-map-scheme>
               <local-storage>true</local-storage>
               <autostart>true</autostart>
          </distributed-scheme>
     </caching-schemes>
</cache-config>You can find the test program below:
import java.util.ArrayList;
import java.util.Collection;
import java.util.List;
import java.util.Map;
import org.joda.time.DateTime;
import org.joda.time.Duration;
import org.springframework.util.StopWatch;
import com.tangosol.net.CacheFactory;
import com.tangosol.net.NamedCache;
import com.tangosol.net.cache.CacheStore;
public class TTLTestServer
     private static final int RETRIES = 5;
     private NamedCache m_cache;
      * List of Time-To-Lives in seconds to check
     private final List<Integer> m_listOfTTLs = new ArrayList<Integer>();
      * @param args
      * @throws Exception
     public static void main( String[] args ) throws Exception
          new TTLTestServer().test();
      * Empty CacheStore
      * @author jbe
     public static class TestCacheStore implements CacheStore
          public void erase(Object arg0)
          @SuppressWarnings ( "unchecked" )
          public void eraseAll(Collection arg0)
          public void store(Object arg0, Object arg1)
          @SuppressWarnings ( "unchecked" )
          public void storeAll(Map arg0)
          public Object load(Object arg0)
          {return null;}
          @SuppressWarnings ( "unchecked" )
          public Map loadAll(Collection arg0)
          {return null;}
      * Sets up and executes the test setting values in a cache with a given time-to-live value and waiting for the value to disappear.
      * @throws Exception
     private void test() throws Exception
          System.out.println(new DateTime() + " - Setting up TTL test");
          m_cache = CacheFactory.getCache("TTL_TEST");
          m_listOfTTLs.add( 1 );
          m_listOfTTLs.add( 3 );
          m_listOfTTLs.add( 5 );
          m_listOfTTLs.add( 10);
          System.out.println(new DateTime() + " - Starting TTL test");
          for (final Integer ttl : m_listOfTTLs)
               StopWatch sw = doTest(ttl);
               System.out.println(sw.prettyPrint());
      * Adds a value to the cache with the time-to-live as given by the ttl parameter and waits until it's removed from the cache.
      * Repeats this {@link #RETRIES} times
      * @param ttl
      * @return
      * @throws Exception
     private StopWatch doTest(Integer ttl) throws Exception
          StopWatch stopWatch= new StopWatch("TTL=" + ttl);
          for (int retry = 0; retry < RETRIES; retry++)
               System.out.println(new DateTime() + " - Adding a value in cache for TTL=" + ttl + " in try= " + (retry+1));
               stopWatch.start("Retry="+retry);
               m_cache.put(ttl, null, ttl*1000);
               waitUntilNotInCacheAnymore(ttl, retry);
               stopWatch.stop();
          return stopWatch;
      * Wait until the value for the given ttl is not in the cache anymore
      * @param ttl
      * @param currentTry
      * @throws InterruptedException
     private void waitUntilNotInCacheAnymore(final Integer ttl, final int currentTry) throws InterruptedException
          DateTime startTime = new DateTime();
          long maxMillisToWait = ttl*2*1000;     //wait max 2 times the time of the ttl
          while(m_cache.containsKey(ttl) )
               Duration timeTaken = new Duration(startTime, new DateTime());
               if(timeTaken.getMillis() > maxMillisToWait)
                    throw new RuntimeException("Already waiting " + timeTaken + " for ttl=" + ttl + " and retry=" + currentTry);
               Thread.sleep(1000);
}You can find the output below:
2009-12-03T11:50:04.584+01:00 - Setting up TTL test
2009-12-03 11:50:04.803/0.250 Oracle Coherence 3.5.2/463p2 <Info> (thread=main, member=n/a): Loaded operational configuration from resource "jar:file:/C:/Temp/coherence3.5.2/coherence-java-v3.5.2b463-p1_2/coherence/lib/coherence.jar!/tangosol-coherence.xml"
2009-12-03 11:50:04.803/0.250 Oracle Coherence 3.5.2/463p2 <Info> (thread=main, member=n/a): Loaded operational overrides from resource "jar:file:/C:/Temp/coherence3.5.2/coherence-java-v3.5.2b463-p1_2/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2009-12-03 11:50:04.803/0.250 Oracle Coherence 3.5.2/463p2 <D5> (thread=main, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
2009-12-03 11:50:04.803/0.250 Oracle Coherence 3.5.2/463p2 <D5> (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
Oracle Coherence Version 3.5.2/463p2
Grid Edition: Development mode
Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
2009-12-03 11:50:04.943/0.390 Oracle Coherence GE 3.5.2/463p2 <Info> (thread=main, member=n/a): Loaded cache configuration from "file:/C:/jb/workspace3.5/TTLTest/target/classes/coherence-cache-config.xml"
2009-12-03 11:50:05.318/0.765 Oracle Coherence GE 3.5.2/463p2 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
2009-12-03 11:50:08.568/4.015 Oracle Coherence GE 3.5.2/463p2 <Info> (thread=Cluster, member=n/a): Created a new cluster "cluster:0xD3FB" with Member(Id=1, Timestamp=2009-12-03 11:50:05.193, Address=172.16.44.32:8088, MachineId=36896, Location=process:11848, Role=TTLTestServerTTLTestServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2) UID=0xAC102C20000001255429380990201F98
2009-12-03 11:50:08.584/4.031 Oracle Coherence GE 3.5.2/463p2 <D5> (thread=Invocation:Management, member=1): Service Management joined the cluster with senior service member 1
2009-12-03 11:50:08.756/4.203 Oracle Coherence GE 3.5.2/463p2 <D5> (thread=DistributedCache:testService, member=1): Service testService joined the cluster with senior service member 1
2009-12-03T11:50:08.803+01:00 - Starting TTL test
2009-12-03T11:50:08.818+01:00 - Adding a value in cache for TTL=1 in try= 1
2009-12-03T11:50:09.818+01:00 - Adding a value in cache for TTL=1 in try= 2
Exception in thread "main" (Wrapped: Failed request execution for testService service on Member(Id=1, Timestamp=2009-12-03 11:50:05.193, Address=172.16.44.32:8088, MachineId=36896, Location=process:11848, Role=TTLTestServerTTLTestServer)) java.lang.IllegalStateException: the node has already been removed
     at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.tagException(Grid.CDB:36)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onContainsKeyRequest(DistributedCache.CDB:41)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ContainsKeyRequest.run(DistributedCache.CDB:1)
     at com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheKeyRequest.onReceived(DistributedCacheKeyRequest.CDB:12)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.IllegalStateException: the node has already been removed
     at com.tangosol.util.AbstractSparseArray$Crawler.remove(AbstractSparseArray.java:1274)
     at com.tangosol.net.cache.OldCache.evict(OldCache.java:580)
     at com.tangosol.net.cache.OldCache.containsKey(OldCache.java:171)
     at com.tangosol.net.cache.ReadWriteBackingMap.containsKey(ReadWriteBackingMap.java:597)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onContainsKeyRequest(DistributedCache.CDB:25)
     ... 7 more
2009-12-03 11:50:10.834/6.281 Oracle Coherence GE 3.5.2/463p2 <D4> (thread=ShutdownHook, member=1): ShutdownHook: stopping cluster node
2009-12-03 11:50:10.834/6.281 Oracle Coherence GE 3.5.2/463p2 <D5> (thread=Cluster, member=1): Service Cluster left the clusterBest regards
Jan

If i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display

because when i use the gps app in my iphone 4s in the car my iphone gets overheat so
if i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display
will that help?

When you use your GPS does your iPhone get hot enough to shutdown? The reason I ask is that I have run my GPS app with the screen brightness set to near max connected to power for hours. My iPhone got hot, but didn't shutdown.

Module borders not displaying when using Aggregator

I am using Captivate 4. I created a TOC for both modules in a project. Then I created an Aggregator to connect them and display both TOCs.
The issue I am havving is that the individual modules have borders on all 4 sides, yet they do not display when using the aggregator. How do I correct this?
Thank you.

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Using Slide Tool No two up display when using keyboard shortcuts

I've noticed when using the slide tool using my mouse, I get the two up display in the canvas the way I'm supposed to, where it shows me the new out point on the left frame and the new in point on the right frame. However if I select the clip and then use the left and right brackets to move the clip, I don't get the two up display in the canvas like if I was using the mouse.
Is this normal, and if so, is there a way I can see the two up display when using the keyboard to slide? thanks.

Is this normal?
well the 2-up is activated by the mouse click and when you trim from the keyboard there's no mouse click ... so yes, this is normal
is there a way I can see the two up display when using the keyboard to slide?
good question. am not in front of an FCP station right now but if i were i'd be clicking around trying to find if it was possible some way

Why is the MPE so much better when using Vista?

I get more realtime playback using Windows Vista than When using Windows 7 with HDV. I can get better GPU and CPU playback both when using Vista for HDV. Why is that? Im using a GT 240 and it kicks *** with Vista. I use a second LCD TV monitor as an NTSC monitor for the realtime previews. I do get some realtime with Windows 7 but only about half as much as with Vista. Something is better about Vista for HDV clips but Idon't know what. I have done several fresh installs and updates. What gives? Any thoughts.

I have done fresh OS installs and Windows updates. The GT 240 was added the same way. For HDV the Vista OS is better. For AVCHD they are about the same. I think it is a bug. It works better using Windows 7 if I don't output to the LCD TV monitor. Do any of you use HDV and preview on a NTSC monitor?

MBP with retina display always crash when using Final cut pro x and iMovie. Plz l need help

HI, My MBP with retina display always crash when l am using Final cut pro x and iMovie and come up with gray screen. Plz l need help

Take it back and get a refund. What are you waiting for, your new Mac does not work correctly.

Custom ContextMenu doesn't display when using hand cursor

I have created a custom ContextMenu, which displays when
right-clicking on the Canvas. If I am showing the hand/pointer
cursor using the code below, and then right-click, the custom
ContextMenu is not displayed. Is this a known issue in Flex 3 or is
there a workaround/fix? Any help is always much appreciated.

"Guddie" <[email protected]> wrote in
message
news:gmcq28$eb$[email protected]..
> Setting buttonMode = false or mouseChildren = true does
not fix the issue,
> and I do need useHandCursor = true.
Make sure you haven't inadvertently set mouseEvents to false.

Help topics are not displaying when using Windows 7 / IE 9 / RH10

We recently upgraded our library from RH8 to RH10. Also used a trial version of RH9 in this process. Now when we compile several of the projects have issues where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around). Anyone else having this problem?? I saw something similiar for Windows8/IE10, but the fix does not apply here (http://forums.adobe.com/message/5138909#5138909#5138909).

Hi,
I (April) apologize I have been OOO and have not been able to respond to your replies.
Let’s start over.
We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
"Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
          No. I it ALSO occurs when launched from the start page.
Have you tried deleting the CPD file and reopening Rh and the project?
          Yes, without success.
Are you using any redirects?
          Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.”
          I will add that the project also displays incorrectly in Google Chrome.
Thanks April

Pages don't always show when using cfinclude

For our site we have a page template, a shell, that we use to
display pages. It uses a cfinclude to call the page into the
template:
<cfinclude page=#url.PageName#.cfm>
The link for that page would look like:
<a href="index.cfm?PageName=contact">
However, on a number of occassions, users click a link for a
page, and get the error "page not found". If they simply hit
refresh, the page shows up without a problem. The page is there,
and it works, but it just doesn't always show until refreshed. Of
course, most users don't know to refresh, and it's a pain to do
anyway.
Any ideas why this happens? Suggested solutions?
Thanks,
Tim

i use cfinclude constantly with no problem... when you get
the 404 page, right click, go to properties and see what page is
being called.
i doubt this would be an issue but try dropping the "url."
from variable... (never know). i usually misspell things like
"PageName" for the same reason (never know) so would be pgName or
something. i never use common words unless i have to in variables
and db fields.
love CF but it has got tons of weird bugs that you just have
to work around.
hope this helps....

Re: HDR5010KB Digital Recorder - signal doesn't always come through using HDMI

Hi,
I bought the above product in October. Since then I've had an intermittent problem. When switching to the AV channel on my TV, (a Panasonic TX-P42S20B) the signal doesn't always come through when using the HDMI channel (I also have it connected via a scart, and that always works so seems to be an HDMI problem.) It's particularly apparent when the recorder has been used for a while (either for recording or playback.) It's not overheating (or if it is, not to the degree I'm getting a warning message), and turning the power off at the mains seems to rectify the issue, but it's a pain.
I've tried switching the hdmi lead, as well as trying different AV channels on my TV and it hasn't helped. Is this a common problem or do I have a faulty unit?
Any suggestions would be appreciated

no, everything else works fine. I've tried swapping cables & hdmi sockets on the TV with no luck. One thing I have noticed, the recorder also works as a hdmi hub (there's 2 additional inputs). Switching the output to one of the other hdmi's, waiting, then switching the outputback to the recorder usually resolves the problem. it's just a pain having to do it

Some Text Messages do not display when using large font on iphone

When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

Hi Peter
Actually, Captivate does have an essentially unlimited number
of undo levels. But that number may appear to be different. The
number of levels starts when you begin editing the project. If you
close and re-open a project, that starts the undo process over.
I've tested and I gave up after about 280 or so undos.
Where Captivate doesn't allow an undo, it normally warns you
with a rather catastrophic looking dialog.
Cheers... Rick

Images not displaying when using Mod_JK

Has anyone had this problem with any success?
platform:
Windows 2000 Professional
Jakarta Tomcat 4.1.3
Apache 2.0.039
Mod_jk connector
My_Sql 4.0.1
I have a successful connection between Tomcat and Apache via the mod_jk module.
All JSP's are displaying with the appropriate data from MySql.
My problem is that no images will display when I connect through Apache, via port 80.
When I connect to Tomcat direct through port 8080, everything displays properly including images.
Currently, I am running my application under Tomcat's webapp subdirectory.
Is there something that I perhaps not did properly configure with Apache's http.conf file or with
server.xml?
Any suggestions or answers would certainly be appreciated.
Thanks,
Lenny Sorey

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Sharepoint Designer always crashes when using the Sharepoint people/group picker in a Workflow

SharePoint designer 2013 (sp1) crashes consistently when doing the following:
Create workflow
Create email action
In the email To field select People/Groups from SharePoint site
SharePoint Designer crashed and says "Microsoft SharePoint Designer has stopped working"
This issue has been reported before in SharePoint 2010 on TechNet as a bug in the software, but with no proper resolution. I am very surprised that it is still an issue in 2013 version (sp1 which was released Feb 2014) and Microsoft have not tried
to address this.
I have read elsewhere that the fix for this is to only have a single IIS binding for the site being used (ie not have additional alternate access mappings). However this is not possible for us as we need the additional alternate access mappings.
Any help/suggestions gratefully received.
Thanks
Bill W

One way is as you mentioned try the below link
http://xblogs.kompas-xnet.si/post/SharePoint-Designer-2013-Crashing-when-using-select-peoplegroups-from-SharePoint-site.aspx
Instead of setting people picker's Return field as "As String" could you please try setting the return field as Email Address
Destin -MCPD: SharePoint Developer 2010, MCTS:SharePoint 2007 Application Development

Help/conte​nts doesn't always display when using Vista

Similar Messages

Maybe you are looking for

Help/contents doesn't always display when using Vista