Help - Custom Jumpstart 10/09 x86 with ZFS
Hi,
I'm trying to Jumpstart Solaris 10/09 x86 with ZFS root paritition. Everything seems to be going okay. My problems are
1. The Server does not automatically boot after completing jumpstart
2. After installation, everytime I reboot the newly jumpstarted machine, I see the following messages on the console, that I don't see with regular installation
# init 6
propagating updated GRUB menu
File </boot/grub/menu.lst> propagation successful
File </etc/lu/GRUB_backup_menu> propagation successful
File </etc/lu/menu.cksum> propagation successful
File </sbin/bootadm> propagation successful
Do you know why I see this progagating message?
My rules.ok file is
root@dev # cat rules.ok
any - - my_profile -
# version=2 checksum=3418
root@dev #
root@dev # cat my_profile
install_type initial_install
system_type standalone
cluster SUNWCreq
pool rpool auto auto auto mirror c1t0d0s0 c1t1d0s0
bootenv installbe bename s10x_u8wos_08a dataset /var
root@dev #
Thank you,
Jacob
Okay, I figured out why I'm getting the File </boot/grub/menu.lst> propagation successful,etc. messages. Its because I had
bootenv installbe bename s10x_u8wos_08a dataset /var
in my jumpstart profile. When that line exists, another boot env is installed, also Live Upgrade is installed when that line exists. Removing that line Live Upgrade is not installed and an alternate boot environment is not installed. But now the problem is, I would like to have a separate dataset for /var and unfortunately it is not possible to create it without the bootenv line.
Does anyone know how I could have the "best of both worlds", ie have separate dataset for /var and not having to install a new boot env.
Thank you,
Jacob.
Similar Messages
-
Boot from second hard drive with ZFS in Solaris 10 x86
Hi,
The usual menu.lst to boot Solaris10 x86 with a boot environment that contains a ZFS boot loader is this one
title Solaris 10 5/08 s10x_nbu6wos_nightly X86
findroot (pool_rpool,0,a)
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
module /platform/i86pc/boot_archive
title Solaris failsafe
findroot (pool_rpool,0,a)
kernel /boot/multiboot kernel/unix -s -B console=ttyb
module /boot/x86.miniroot-safeI understand that to add an alternate boot disk, I have to play with installgrub and then attach it in the pool.
But my question is : Is there a way to boot from my alternate hard disk by adding a new entry in menu.lst or is the only
way is to modify the BIOS parameter?
Thanks for your help,
Groucho_frGroucho_fr wrote:
Thanks for your answer Alan,
But ok, I imagineI can add a grub entry. But what I want to know is what is the exact way to boot from an alternate hard disk on Solaris 10u6
x86.AFAIK there are only two ways to do this. Select the disks via BIOS which becomes a royal PITA in a short amount of time or play with a boot manager such as GRUB until you get the syntax right.
Personally I put all OS's on the primary disks if possible to avoid these situations and if I have others to play with then you can easily mount them in or set them up as D: drive etc...
The only exception would be in an enterprise setting where you need to do things such as mirroring but then again in those situations it's only one OS per machine anyways so it's much easier.
So at the end, I am not sure what I have to configure and what is the procedure to boot from my alternate boot diskTry the grub homepage for the grub manual and hopefully for a mailing list or try a search engine.
http://docs.sun.com/app/docs/doc/819-5461/zfsboot-1?a=view
has an example to follow of using -B.
And moreover, the installgrub does not working for me :
root@mac1 # zpool status
pool: rpool
state: ONLINE
scrub: resilver completed after 0h2m with 0 errors on Thu Mar 26 10:56:24 2009
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
mirror ONLINE 0 0 0
c5t0d0s0 ONLINE 0 0 0
c5t4d0s0 ONLINE 0 0 0
errors: No known data errors
root@mac1 # installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c5t4d0s0
cannot open/stat device /dev/rdsk/c5t4d0s2
You shouldn't need to do an installgrub if you installed Solaris. Try c5t4d0s0 not s2.
alan -
10 update 6 - Jumpstart with ZFS root
Please help me to solve the problem with jumpstart and root on zfs in update 6:
On server:
#grep pool profile
pool zfs all auto auto auto
...ok, but on a client:
#/sbin/install-solaris
...<skip>...
ERROR: Field 1 - Keyword "auto" is invalid
Solaris installation program exited.
The manuals says that this keyword is appeared in the Update 6 (10/08).
What's wrong?
Thanks.Is it possible that someone could elaborate on the solution a little more? I copied the check file from the 10_08 DVD to no avail. The Solaris install root is 10/08 and I've correctly updated the solaris_media_locations file, but I still get this error. I cannot find a mention of the word "pool" in my profiles, but of course, I am using "rpool".
ERROR: Field 1 - Keyword "pool" is invalid
Solaris installation program exited.
Thanks,
E.R. -
Solaris 10 x86 custom jumpstart pxe/dhcp install problem
Ok, I have a custom jumpstart server installed and working (sort of...) when installing onto just a single client. It works perfect. It installs, reboots and comes up just fine. BUT...
The DHCP portion of the server has 230 addresses allocated from an private IP block.
The problem is, when i try to custom jumpstart 20 servers at the same time, the PXE portion times out and fails on all of the clients.
Any ideas?Thanks for your answers.
Yes, both machines have the same hardware exactly. Finally, I could find where the problem was.
The file bootenv.rc, for some reason that I don't know, was corrupted: In it there was a correct line with bootpath variable correctly defined, but, at the end of the file, there was another line setting the bootpath variable to a long and incoherent string of chars. Booting in failsafe, mounting the system in /a, and removing that stupid line from the bootenv.rc, solved the problem. -
Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!
If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434
-
Hello,
Am relatively new to using liveupgrade to patch solaris 10 systems, but so far have found it to work pretty well. I have come across an oddity on a system that I would like to have explained. The system has solaris 10 installed, with one zfs pool rpool, and when I create an alternate BE to patch with: lucreate -n altBEname, it does not use the clone/snapshots of zfs to quickly create the alternate BE. It looks like it is creating a full copy (like lucreate does on our systems using ufs), and takes about 45 minutes to 1 hr to complete. On other solaris 10 systems installed with zfs, the lucreate command completes in a minute or so, and a snapshot along with the alternate BE is in the zfs list output. On this system there is no snapshot, only the alternate BE. Below is output from commands run on the system to show what I am trying to describe. Any ideas what might be the problem, thanks:
bash# lustatus
Boot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
Solaris_10_012011_patched yes yes yes no -
Solaris_10_022011_patched yes no no yes -
bash# zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 22.1G 112G 97K /rpool
rpool/ROOT 17.0G 112G 21K legacy
rpool/ROOT/Solaris_10_012011_patched 9.18G 112G 9.18G /
rpool/ROOT/Solaris_10_022011_patched 7.87G 112G 7.87G /
rpool/dump 1.00G 112G 1.00G -
rpool/export 44K 112G 23K /export
rpool/export/home 21K 112G 21K /export/home
rpool/swap 4.05G 112G 4.05G -
bash# lucreate -n Solaris_10_072011_patched
Analyzing system configuration.
Comparing source boot environment <Solaris_10_012011_patched> file systems
with the file system(s) you specified for the new boot environment.
Determining which file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <Solaris_10_072011_patched>.
Source boot environment is <Solaris_10_012011_patched>.
Creating boot environment <Solaris_10_072011_patched>.
Creating file systems on boot environment <Solaris_10_072011_patched>.
Creating <zfs> file system for </> in zone <global> on <rpool/ROOT/Solaris_10_072011_patched>.
/usr/lib/lu/lumkfs: test: unknown operator zfs
Populating file systems on boot environment <Solaris_10_072011_patched>.
Checking selection integrity.
Integrity check OK.
Populating contents of mount point </>.
Copying.
Creating shared file system mount points.
Creating compare databases for boot environment <Solaris_10_072011_patched>.
Creating compare database for file system </>.
Creating compare database for file system </>.
Updating compare databases on boot environment <Solaris_10_072011_patched>.
Updating compare databases on boot environment <Solaris_10_022011_patched>.
Making boot environment <Solaris_10_072011_patched> bootable.
Population of boot environment <Solaris_10_072011_patched> successful.
Creation of boot environment <Solaris_10_072011_patched> successful.
bash# zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 30.8G 103G 97K /rpool
rpool/ROOT 25.8G 103G 21K legacy
rpool/ROOT/Solaris_10_012011_patched 9.22G 103G 9.22G /
rpool/ROOT/Solaris_10_022011_patched 7.87G 103G 7.87G /
rpool/ROOT/Solaris_10_072011_patched 8.70G 103G 8.70G /
rpool/dump 1.00G 103G 1.00G -
rpool/export 44K 103G 23K /export
rpool/export/home 21K 103G 21K /export/home
rpool/swap 4.05G 103G 4.05G -Hi,
i have installed Solaris10 x86 in vmware. The root disk is currently present on UFS Filesystem. "c0d0s0" on disk "c0d0"
i have placed another new disk and created a root pool (rpool). "c0t2d0s0" on "c0t2d0"
lustatus -> (shows the c0d0s0) as the current boot environment
when i try to create a new zfs boot environment it gives me a error. Please help
"lucreate -c c0d0s0 -n zfsBE -p rpool"
it tells me "unknown option -- p"
cat /etc/release shows me this...
Solaris 10 5/08 s10x_u5wos_10 X86
Please help!!!! -
How to update a custom field in declarative workflow with VS 2013
Hello,
How to update a custom field in declarative workflow with VS 2013
any help would be appreciated!!!!!
Thanks regards, Vignesh.Dear all,
I'm using 4.6C right now, i already implement BADI MEREQ001, but this only valid
for creating PR via ME51N.
I found an EXIT_SAPLEBND_001 and tried to implement it,
but i got another difficulties since how i transfer CEBAN structure to EBAN structure.
thanks very much.
Regards,
Billy -
Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0
Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fiHi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho -
Install NetConnect in Global Zone of Solaris 10 x86 with 5 local zone fail
Problem:
Install NetConnect in Global Zone of Solaris 10 x86 with 5 local zone failed
But I didn't have any issue with the same pkg in Solaris 9
Steps taken:
# groupadd netcon
# useradd -d /export/home/netcon -g netcon -m netcon
# vi /etc/shadow
change LK to NP
# ./UninstallNetConnect.003.002.001.sh
# ./InstallNetConnect.003.002.001.sh
Enter the user account to use: netcon
Enter group: netcon
Installing Sun(SM) Net Connect Proxy Core as <SUNWsrspx>
## Installing part 1 of 1.
/etc/opt/SUNWsrspx/CustomerCert.pem
/etc/opt/SUNWsrspx/SRSCACert.pem
/etc/opt/SUNWsrspx/binaries
/etc/opt/SUNWsrspx/srsproxyconfig.cfg
/opt/SUNWsrspx/bin/srsexec
/opt/SUNWsrspx/bin/srsinstall
/opt/SUNWsrspx/bin/srsinstallmode
/opt/SUNWsrspx/bin/srsproxy
/opt/SUNWsrspx/bin/srspxrun
/opt/SUNWsrspx/bin/srspxstat
/opt/SUNWsrspx/bin/srspxtrace
/opt/SUNWsrspx/bin/srsuser
/opt/SUNWsrspx/bin/srsxfer
/opt/SUNWsrspx/lib/srsimapi.jar
/usr/lib/libsrsimapi.so.1
[ verifying class <none> ]
## Executing postinstall script.
copying initial install customer cert into place
copying initial install srs cert into place
copying initial install proxy config file into place
removing any existing uninstallscript before copying the correct one
copying uninstall script into place
/var/sadm/pkg/SUNWsrspx/install/postinstall: /opt/SUNWsrspx/bin/srspxrun: cannot execute
proxy queue initialization failed
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <SUNWsrspx> failed.
ERROR: pkgadd failed for: SUNWsrspx
Please correct this situation and rerun the installation.
Exiting installation.
# cat /var/adm/messages
Oct 7 00:00:01 planet root: [ID 702911 daemon.error] ERROR: proxy queue initialization failed
Any clue, or it will only possible in Global zone that didn't have any local zone
thanks in advanceProblem:
Install NetConnect in Global Zone of Solaris 10 x86
with 5 local zone failed
But I didn't have any issue with the same pkg in
Solaris 9
Steps taken:
# groupadd netcon
# useradd -d /export/home/netcon -g netcon -m netcon
# vi /etc/shadow
change LK to NP
# ./UninstallNetConnect.003.002.001.sh
# ./InstallNetConnect.003.002.001.sh
Enter the user account to use: netcon
Enter group: netcon
Installing Sun(SM) Net Connect Proxy Core as
<SUNWsrspx>
## Installing part 1 of 1.
/etc/opt/SUNWsrspx/CustomerCert.pem
/etc/opt/SUNWsrspx/SRSCACert.pem
/etc/opt/SUNWsrspx/binaries
/etc/opt/SUNWsrspx/srsproxyconfig.cfg
/opt/SUNWsrspx/bin/srsexec
/opt/SUNWsrspx/bin/srsinstall
/opt/SUNWsrspx/bin/srsinstallmode
/opt/SUNWsrspx/bin/srsproxy
/opt/SUNWsrspx/bin/srspxrun
/opt/SUNWsrspx/bin/srspxstat
/opt/SUNWsrspx/bin/srspxtrace
/opt/SUNWsrspx/bin/srsuser
/opt/SUNWsrspx/bin/srsxfer
/opt/SUNWsrspx/lib/srsimapi.jar
/usr/lib/libsrsimapi.so.1
[ verifying class <none> ]
## Executing postinstall script.
copying initial install customer cert into place
copying initial install srs cert into place
copying initial install proxy config file into place
removing any existing uninstallscript before copying
the correct one
copying uninstall script into place
/var/sadm/pkg/SUNWsrspx/install/postinstall:
/opt/SUNWsrspx/bin/srspxrun: cannot execute
proxy queue initialization failed
pkgadd: ERROR: postinstall script did not complete
successfully
Installation of <SUNWsrspx> failed.
ERROR: pkgadd failed for: SUNWsrspx
Please correct this situation and rerun the
installation.
Exiting installation.
# cat /var/adm/messages
Oct 7 00:00:01 planet root: [ID 702911 daemon.error]
ERROR: proxy queue initialization failed
Any clue, or it will only possible in Global zone
that didn't have any local zone
thanks in advance
[I believe that it does not work in x86, watches with pkginfo - l SUNWsrspx, in the platform.
Willy Suarez
Sopport UNIX
Colombia/code] -
How to create a full system image for Solaris 10 with ZFS
Dear friend,
could you please advice which way to create a full system image for Solaris 10 with ZFS is trusted and practically used?
I'm searching the analogy like Norton Ghost or Acronis True Image but with ZFS support.
I have x86 server Sun Netra X4270.
Thanks in advance,
DinaOne more question Filip,
is it correct, that I should make 2 separate backup for ispool and rpool?
And is it important in which order to restore them from backup?
bash-3.2# zpool list
NAME SIZE ALLOC FREE CAP HEALTH ALTROOT
ispool 136G 8.08G 128G 5% ONLINE -
rpool 136G 44.1G 91.9G 32% ONLINE -
bash-3.2# zfs list
NAME USED AVAIL REFER MOUNTPOINT
ispool 8.08G 126G 31K /ispool
ispool/iserver 8.08G 126G 8.08G /export/home/iserver
rpool 44.4G 89.5G 46.5K /rpool
rpool/ROOT 39.1G 89.5G 31K legacy
rpool/ROOT/firstbe 39.1G 89.5G 14.1G /
rpool/ROOT/firstbe/export 20.1G 89.5G 32K /export
rpool/ROOT/firstbe/export/home 20.1G 89.5G 20.1G /export/home
rpool/ROOT/firstbe/opt 651M 89.5G 133M /opt
rpool/ROOT/firstbe/opt/SMAW 518M 89.5G 518M /opt/SMAW
rpool/ROOT/firstbe/usr 3.45G 89.5G 3.45G /usr
rpool/ROOT/firstbe/var 867M 89.5G 867M /var
rpool/dump 1.00G 89.5G 1.00G -
rpool/swap 4.25G 89.8G 4.00G -
Br,
Dina -
Custom reports do not run with error message: Routine FDPREP cannot read ..
Hi
Can anybody help me with this issue pls?
The dev system is cloned from production a few days ago. After running the post clone procedure, the dev is working fine except when we are trying to run custom reports, it errorred out with error message - Routine FDPREP cannot read the file /fmis/11.5.0/reports/US/POXPRPO1.rep. I have checked the env files, and they seem ok. $CUSTOM_TOP is set to the correct value. Other standard Oracle reports are running properly. The custom report file extension is in low case (.rdf). I've even tried to compile the report manually by using rwcon60.sh, the rep file was created under that folder but concurrent manager is still giving the same error message. So I am suspecting whther it is the path issue, as from the error message we can see up there, it is not showing the absolute path. Can anyone pls shed some lights on this for me?
Thanks!
LiangHi hsawwan,
Echo $FMIS_TOP(Custom Top) returns /global/app/fdev/home/fdevapp/findevappl/fmis/11.5.0, which is the correct path.
Interesting thing is I checked the custom forms and they are working properly , our current configuration is form server and web server are sitting on one node, and CM, admin and database are sitting on the other node. So it seems it is the CM node settings caused the problem. However, I've just compared the APPSORA.env, customfindev_XXXXXX.env $FMIS_TOP (Custom Top) on the two nodes, and nothing seems out of ordinary.
Thanks,
Liang -
Custom jumpstart Solaris 10 5/09 going interactive
Been trying to do a custom jumpstart for Solaris 10 5/09 SPARC and keep getting into interactive mode.
Here is the profile and sysidcfg. Both work for Solaris 10 11/06 SPARC. The target machine is a SunBlade 100.
Profile
install_type initial_install
system_type standalone
partitioning explicit
cluster SUNWCXall
filesys c0t0d0s0 20480 /
filesys c0t0d0s1 2048 swap
filesys c0t0d0s5 10000
filesys c0t0d0s6 4
filesys c0t0d0s7 free /u
sysidcfg
system_locale=C
timezone=US/Pacific
network_interface=primary {hostname=IL02 default_route=192.168.1.1 netmask=255.2
55.255.0 protocol_ipv6=no}
terminal=vt100
security_policy=NONE
root_password=2KF8gF8gF8gF8
name_service=NONE
timeserver=localhost
sysidnfs4=gomonarch.com
Anyone have a similar experience with this release?This release like the previous one require updating "check" script for rules.ok from this release. The notes also indicate your host should have the latest firmware (prom) release. I'd make sure the blade 100 is supported. double check your entries for this host in bootparams to assure you removed the old and re-added this release. Mostly I'd "boot net -v install" so you can see the verbose output which should show you the issue just before dumping you into the menu. I have installed this release via normal jumpstart in V240 and T2000 clients with no issue. However I have an upgrade from 8/07 that fails when checking diskspace so I can't say upgrades work. From your description it almost seems like it's not finding the sysidcfg at all but your verbose boot will show all the details.
good luck, JB -
./setup_install_server failing with ZFS
I recently upgraded my jumpstart server to 10/08 with ZFS boot. My installation media is located under /export/install/media, where /export/install is a ZFS file system (zpool1/install).
I'm trying to add Solaris 9 installation media, but setup_install_client errors as follows:
2009-01-14 12:06:44 # ./setup_install_server /export/install/media/Solaris_9_905hw_sparc
ERROR: zpool1/install is not a local filesystem, cannot export /export/install/media/Solaris_9_905hw_sparc for install clients
2009-01-14 12:06:58 #I assume setup_install_client from older install media isn't smart enough to handle an underlying ZFS file system. Is there some way around this?You could probably hack setup_install_server to not worry about that check. Or you could just copy of the image directory yourself to the correct location.
Darren -
Client Push on Windows 7 x86 with IE9 open.
I everyone, I need to validate something.
I am currently deploying SCCM 2012 R2 for a client of mine.
They are using mainly Windows 7 with SP1 x86 with IE9 installed.
When doing client push from the console or installing any SCCM agent update, we are getting an error message stating the IE just crashed and the error is talking about IEFrame.dl:
Doing the same thing on a Windows 7 with SP1 x64 is not getting an error message.
Anyone can reproduce the error on is side? Or anyone know a workaround for this issue?
We are talking about SCCM 2012 R2 CU3 doing a client push on a Windows 7 with SP1.
There is no update done on Windows (I was using the default install.wim at first then applied all updates) and IE9 is installed (installation file downloaded at
http://techdows.com/2011/03/download-ie9-final-offlinestandalone-installer.html).
I will try the same thing with a all the updates installed on Windows 7 x86.
Thank you for your help.
MathieuAfter some troubleshooting and a bit of luck, the problem is the following:
The December update KB3008923 (Cumulative Update for IE December 2014) was causing the problem on IE9.
The update released on January 2015 KB3025945 is fixing the issue.
This is not an update available through WSUS so you have to look for it at
http://catalog.update.microsoft.com.
There is a bit more information, the problem is recurring but I did not found which task was causing the error so it was not only the installation that was causing the problem. After installing the KB3008923, the problem was present on any x86 Windows 7
computer running any version of configMgr agent (tested on 2012 SP1 and 2012 R2).
After installing the January update, the problem is gone.
Mathieu -
I'm having a hell of a time making a Solaris 8 custom jumpstart CD. I've got as far as booting from the CD, installing everything but then when the system reboots, I get a "file not executable" error. There's nothing useful on the hard disk ...
The relevant blueprint says to use "Software CD 1" as a template for the slices. Does this mean the first software CD or the install CD? Much of the documentation for this process talks about using CD "1 of 2" but I have three - an install CD and two software CDs.
Any help appreciated.Hi
I believe it's referring to Software CD 1 of 2 and 2 of 2.
You don't need to use the first "install" CD to load Solaris. This just seem to give you the Web Kiosk loader.
regards
Ceserian
Maybe you are looking for
-
Hi, working on a cookbook and just downloaded a trial of InDesign. Am not completely lost because I'm pretty familiar with Photoshop and Acrobat. So I want the final book to be 8"x8" a single first page and then double sided with an image on one side
-
No preview window in Premier Pro cs5?
I was working on a movie project and had problems with the preview window cropping the video so I wasn't viewing the whole shot. I exited out of the preview window and now I don't know how to get it back and how to make it so it's not cropping. Help
-
hello. my router have some strange problems. after factory defaults setup it work ok, when i change dmz or load configurations, or when i disconnect firewall, after reboot it don't connect to internet at all. at status bar sayed - connected and there
-
Purchase Requisition release WF with multi-level release strategy
Since it has been "a while" from my WF course and i lack experience with WF's (this is supposed to be the 1st one i implement, finally)... The problem I'm facing is really in planning phase of sketching up how my scenario should look like. I have to
-
Creating an e-card with Flash. Some questions...
Hi. I want to create a short animated e-card using flash 8. Eventually, I'll be sending the e-card to several email addresses. How do I create the e-card so that: 1. recipient opens email and the flash animated card starts automatically 2. the flash