Help - Kodak 5300 printer doesn't work w/ Airport Extreme Base Station

Hi All,
Running a MacBook on OS 10.4.11 (airport extreme card) and an I-Book on 10.3.9 (airport card) - just bought an airport extreme base station and a Kodak 5300 all-in-one printer. Base station works fantastic with internet and both CPUs. Kodak printer works great when directly connected to laptops by USB. When printer connected to USB port on Base station it recognizes printer but wont print. Set-up printer with Bonjour settings - but printer won't print with WiFi. "Printer not responding" window appears. Have phoned Kodak support. They tell me the printer should work on Wi-fi but I should contact Apple. Have phoned Apple support - they're stumped. Kodak website recommends using a Silex wireless router with this printer and claims it is compatible - so it can handle wireless set-ups.
Has anyone out there had success with the Kodak 5300 and the Airport Extreme Base Station? It's a great printer that uses very little ink (inexpensive cartridge replacement). I really don't want to fall back on my old Epson.
Thanks for any thoughts/solutions.

Hi Ron! Thanks for checking inside Kodak. I agree as a first printer from kodak it's a good one, and I certainly appreciate the attempt to buck the industry-standard of milking the customers on ink.
However, I'm not willing to go buy a silex device, when I already HAVE a device: the apple airport. I also got a reply from kodak support indicating that they didn't want to comment on future products, etc etc. Maybe I'm misreading this by assuming product == hardware, but I'm certainly not willing to ditch my current printer for a newer model for what I consider to be a DRIVER issue (I could be wrong of course). Maybe a firmware issue, but certainly not a hardware issue.
What I expect from Kodak is a new driver and/or firmware that would make this work with the apple airport. On the one hand I can understand not wanting to divulge company secrets and upcoming "products", but for a newer driver, I would expect to hear a "we're aware of the problem and are working on a fix". That would go MILES towards making me more patient and less irritated with Kodak. Telling me to wait for newer "products" or go buy a silex is a good way to loose customers.
So if you have any internal clout (or a message board), be sure to raise cain there for them to do the right thing.
jan
P.S. At the current time of writing, the silex website is not operational ("This site is temporarily unavailable. Please notify the System Administrator"). Way to go silex!

Similar Messages

Printer that works with Airport Extreme Base Station

Hi. We are very new to Macs (2 weeks). Have a Mac Book and AEBS. Both work fine. Our HP printers, however, only work if connected directly to the Mac Book. I'm informed that we need to get a printer that works with the AEBS if we wish to have wireless printing. If anyone can recommend a printer that works with AEBS, we'd be grateful. Thanks.

Hello Jungle-cat. Welcome to the Apple Discussions!
Check out the following iFelix site to see which printers are known to work (not not) with the new 802.11n AirPort Extreme Base Station (AEBSn).

Problem consistently printing via new (summer 2011) AIRPORT EXTREME BASE STATION and Brother wireless printer (model HL5370DW). What am I doing wrong?

Thanks in advance for any help you folks can offer. I'm a newb here and will try to offer as much detail as I can about the dilemma at hand.
Scenario: Home network has been recently set up for wireless internet access via NEW Airport Extreme Base Station (purchased September 2011). Units accessing the network include: 2011 Macbook Pro, 2011 Macbook Air, 2007 Macbook, 2009 Macbook Pro, 2 iPhone 3GSs, and a 1st-gen iPad (and a partridge in a pear tree AEBS is configured to run WPA2 encrypted network, as well as a WPA2 guest network. I am attempting to yoke a BROTHER HL5370DW wireless B or G/ ethernet / usb-capable printer to the main network such that any and all units can print wirelessly or its equivalent (i.e., via printer hooked to AEBS through USB hub)
Problem: Despite configuring the Brother printer to recognize the main WPA2 network I created, I am unable to get wireless printing to work. My workaround was to physically connect Brother printer to AEBS via USB, specifically using a Belkin USB hub (after all, I wanted access to usb drives, as well as the printer). This workaround works ONLY SOME OF THE TIME. Generally, after a fresh boot of any computer or after a restart of the AEBS, any given computer will be able to print (i.e., any computer wirelessly connected to the main WPA2 network recognizes the printer). HOWEVER, at random times, printer access is gone (as is access to USB drives connected to AEBS's usb hub). Wireless networks are still up and running when that happens. IS THERE A WAY TO GET THE USB HUB's devices (i.e., printer and usb drives) to ALWAYS REMAIN AVAILABLE AS LONG AS THEY STAY CONNECTED TO THE AEBS? In other words, what accounts for the intermittent loss of the usb peripherals?
Sometimes, I just shut the airport off on whatever computer is having this problem, and the problem goes away. Sometimes, the problem is present across all computers in the house, sometimes only a few are affected. I can ALWAYS see the AEBS in the Airport Utility if the AEBS is connected to the particular computer via ETHERNET CABLE.
My theories:
- true wireless printing (i.e., without usb hub workaround) doesn't work because the N network somehow isn't backwards compatible with the Brother printer, which, i believe, is B/G. Although...isn't Wireless N networking supposed to work with BG devices? I did find a thread (https://discussions.apple.com/thread/2570774?start=0&tstart=0 ) that explains some of the particulars of WPA2 encryption and Wireless B/G issues, but it was beyond my level of comprehension (I'm a psychologist, but not an Apple Genius
- The usb workaround is only intermittently viable because of some flaw in the Airport or Airport Utility that causes dropouts to happen when a Macbook Pro or Air's lid gets closed or one gets opened after having been at a different network (e.g., at my office).
QUESTIONS:
- Should I try to use my old router (7 year old Linksys WRT54G) as an access point and connect the Brother printer to that G-router? How do I do that?
- I wouldn't mind just relying on the usb hub method if I could just insure more consistency (i.e., no random dropouts of peripherals). How could I do this?
Rule out:
- wireless printing works on my printer - it was being recognized back before the AEBS. I had the Linksys router running a WEP network and had the wireless printer talking with no cables to the router and the computers. (I just don't want to revert to using WEP encryption given its lack of security and my trying to protect HiPAA related health information on behalf of patients)
Any help will be greatly appreciated.
Thanks in advance!

13 ASCII characters = 104 (aka 128)-bit WEP
encryption
If turning off WEP works, then you just need to
provide the cameras with the "Equivalent Network Password".
One of the problems with WEP is that the actual
standard relies on a 10 character HEX key for 40bit
WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain
algorithms to convert simple alphanumeric passwords
(or passphrases) into HEX keys, thus enabling the use
of simple easy to remember WEP password rather than
lengthy HEX keys. The problem is that different
vendors use different algorithms to generate the HEX
key and therefore a ASCII password on an AEBS will be
hashed differently on a non-Apple client and vice
versa.
You may find the following article helpful:
- Apple article, especially the part about
"Third-party client to Airport".
Brilliant idea about trying the system with No encryption on... that DID solve the problem... almost.. once I turned off the encryption option, and restarted the Airport, I got a dialog box showing that the "Base station needs attention" but it didn't indicate WHAT kind of "assistance" it needed. Nonetheless, I closed out of the Airport program only to find that the indicator light, which had been Green, was now, flashing Yellow and I could not connect anything, including my computer. I opened the Airport program again and found the ONLY way I could get the Green light on was to select some sort of encryption option... then the light would go Green again but my cameras would not hook up again, and when I went back in and ONLY changed the option to NO encryption, I got the yellow flashing light and the "this base unit needs attention" warning...
I think your suggestions are almost on the mark... is there any way of reconciling the WEP coding between the cameras and the Airport??? Or turning off the encryption option and STILL have Airport work?
Thanks again for your help and suggestions... I really appreciate it.
geoff

Airport Utility doesn't see functioning Airport Extreme Base Station

I have an Extreme (n) Base Station which serves as a WDS main with one relay Express and one remote Express. All three are functioning properly. Now I want to add a second remote Express paired with the main Extreme. However, Airport Utility doesn't see the Extreme, even when hardwired. So I have no way to add in the Apple ID of the new remote.
Any suggestions on how to resolve this? Is it necessary to restore default settings on the Extreme and reconfigure EVERYTHING?
Thanks.

Not yet. Hoping there is some other approach, since if I reset it and then it loses the connection before configuration is complete, I lose the functions that are working now.

Printing to Ethernet Printers Using Airport Extreme Base Station 802.11n

I don't want anything extraordinary. I think what I have to set up is pretty simple.
I have a PowerMac G5 tower and an Airport Network with an older 802.11g AExBS connected to my cable modem. I just acquired an AExBS 802.11n. While I'm sure that people would tell me to ditch the older one an just use the newer one, that is not today's task.
All I would like to do is to use the AExBS for my 3 Ethernet printers. The printers are:
Brother HL-2070N
Brother MFC-420CN
HP Color Laserjet CP2025dn
Each printer is plugged into each of the 3 ethernet ports and not the WAN port. I didn't have any problems using my Netgear WGT624 wireless router, so I don't know why the AExBS is giving me such a headache. Is there something simply I'm missing in the instructions? Can anybody tell me if I'm missing something here?

Now I have managed to delete all but my directly connected USB printers in the Print & Fax area of my System Preferences. What gives?
I thought this was going to be straight forward. They don't even address hooking up ethernet printers in the manual. I've looked over the web and see other people having the same problem, but their original setup appears to be different and/or more difficult.

Printer and AirPort Extreme Base Station with Gigabit Ethernet

Hello!
I own a macbook, one windows xp pc, and two windows vista notebooks. I bought a airport extreme base station. I set it up with my macbook at first and I do a print and it works. I do the same with the others. I install the printers drives to all notebooks. Then tried to print and only one of them worked. They all have bonjour download for windows. So i restarted all the pc's and mac and tried to print and never prints. On the pc's i get a error message. On the mac i get an its busy and never prints. All of them connect to the internet, but no printing. I have the printer connected to the base station. I did two prints and then I couldnt print after that. Internet works. Please i need some help to fix this. Thanks in advance

Hi
Maybe you already have fixed your printing problem. I'm no expert but I sometimes have had printing problems and I feel for you. However, first of all. What sort of printer do you have? It sounds to me that one of the pc printing documents got stuck somewhere on its way to the printer and now it is taking up space on the network (figuratively speaking ofcourse). I can recall something happening to my network/printer some years ago. Unfortunately I can not remember what I did to fix the problem but if I were you I would do the following: First I would disconnect the pc from the network and then try to reset the printer clearing its print memory. Then I would try to get the mac to print again. If succesfull I would take the mac off the network and connect one of the pc's and get that to print. If I succeded I would repeat the procedure with the other pc's. If I wasn't succesfull I would clear the memory again and then try with one of the other pc's. But I would only try one computer at the time to try to isolate the problem. Maybe you have already tried this and since pc's are a mystery to me I dont't know how to help you in that department. However using bonjour on the pc's I would not expect to have problems (though I use Windowc XP print menu on my vertual pc - works fine).
Hope that you will solve your problem soon.
Berit

Recognizing a printer attached to an Airport Extreme Base Station

I have attached a printer to the usb port of my airport extreme base station. The printer is recognized by two of my MacBook Pros running Mac OS X version 10.4.11. However, it is not recognized by my latest MacBook Pro running 10.5.2. Is this a problem with the new system, or is there another reason? I have, of course, made sure that the printer drivers are installed, and the printer attached to the Airport works with the new MacBook Pro when connected directly through a usb port on the laptop. Any help will be gratefully received!!

samandlily wrote:
I have something related to this topic going on. I have an Epson printer on my Airport Extreme via a USB. Just recently when I try to print from my iMac, I get a message saying that "the Airport Network is busy, and it will try again in 10-20 seconds". Then nothing happens and the document will not print. Any ideas what is going on?
Please do not pollute the OP's thread by posting here. You are clearly experiencing a different problem - different symptoms, different version of OS X, different printer - and will get much better help if you start your own thread because your problem will get lots more attention that way.
- cfr

Why can I no longer print from my Windows XP computers to my Bonjour connected Canon printer thru an Airport Extreme Base Station (f/w 7.6.4, model A1301)?

Something has changed recently and I haven't figured it out. My 2 Windows XP computers are no longer able to print via Bonjour. I have tried removing and reinstalling Bonjour. Upgrading the firmware on the AIrport Extreme Base Station and comparing Port settings from an able to print Windows Vista laptop. Port settings match and Bonjour says it sees the printer...but the communication is not happening between the computer and the networked printer, it times out and produces an error in the print que. Both XP computers have no problem using the internet via the Base Station. One is wired and one is wireless. Thoughts?

Sounds a bit like a problem being discussed in this thread:
http://discussions.apple.com/thread.jspa?threadID=2651093&tstart=0
I suspect some kind of update is at fault. Like you, my printer/base station setup had been working fine until recently.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

I have a MacBook ProDo I have to have the Airport Extreme Base Station for my Airport Express to work?

I cannot get the darn Airport Express to work! It just keeps blinking Amber. I know it must be something silly I am over looking. And I do not have the Airport Extreme Base Station.
Thank you for any help!!!
Elizabeth

Thanks,
This is the rear of your modem/router:
Connect a Cat5e or Cat6 cable from any of the 4 Ethernet Lan ports to the (single) socket on the Express, then go to Airport Utility (Applications>Utilities>Airport Utility) and select create a new network.
You will need to turn the wireless transmiter in the Netgear off, here is a link to the Netgear Manual in case you need to refer to it.
Netgear Manual

Web Sharing with Leopard 10.5.2 and Airport Extreme Base Station HELP!!!

Ok...I want to set up web sharing on my computer but so far my attempts have failed.
I have an intel iMac with Leopard 10.5.2 installed and I have the latest Airport extreme base station (With draft n).
I turn on web sharing, and of course it works locally but not when trying to be accessed over the internet.
Now I realize that by default my routers address wont let anyone connect to my computer over the internet.
My router has an ip of 10.0.1.1, and I assigned my computer a static ip address of 10.0.1.200.
Now in the network preferences pane and the airport category, i set my computers IP (the 10.0.1.200), I put the gateway as 255.255.255.0, the router as 10.0.1.1 and the DNS as 10.0.1.1
Now going over to the airport utility I added a new entry in the port mapping section, with port 80 (both public and private) and the IP of my machine, 10.0.1.200.
Now in theory this should work but NOOOOO.
Does anyone have the same setup? a wireless network with the new airport extreme base station and has successfully configured Web Sharing?
Thanks in advance.
Felipe

Well here is an update.
I saw an entry in apple support that said I had to change some setting in the apache folder /etc/apache2 in order to avoid getting the 403 forbidden error. I tried this and it did not work, i checked my user configuration file as well and the path to my home site directory was correct
Anyone here have a similar setup and has it working? It shouldnt be too hard to set up web sharing through a router. It has to be possible or else a lot of people would not buy a router because of this.
thanks in advance to anyone kind enough to help
Bye.

Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
Thanks

The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
Assuming your AE is gen3 or greater.
You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
If your AE is G wireless or earlier model.. really the time has come for replacement.
If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

Setting Up Comcast to Work with the AirPort Extreme Base Station

I just set up Comcast high-speed internet through the cable modem and ethernet connection and it works fine. What I need is a step by step instruction on how to set up the connection through my AEBS. I've tried to configure using the Admin Utility, the AirPort Set-Up Assistant, the Network panel---all with no success. I'm not sure what to enter in the boxes or what to check. I've read the "Designing AirPort Networks" PDF and it wasn't much help.
The AirPort Network was working fine with the dial-up connection I had before.

Voila! NOT!!!
I'm having the same problem trying to set up a friend's "new" Macs, and I cannot get them connected to the internet. I've also followed the same steps. I tried the resetting trick (unpluging, waiting, repluging the modem first, then the Airport Extreme Base Station.)
The DSL ISP is SBCGlobal. Their dsl modem is SpeedStream 5100. The AirportEBS is the about 4 year old white base station with the phone jack, and a WAN and a LAN ethernet ports. I'm trying to connect two iBooks and a MacMini.
Everything did fine for the past year with the modem in "regular" mode and only ONE Mac connected. When the new Macs were recently acquired, SBC techs said that the modem needed to be put into PPPoE mode so that multiple Macs could be connected at the same time. This was done. [The techs said in regular moden the modem does the authentication; in PPPoE mode the modem acts as a bridge and the AirportEBS is the router and provides the authentication. I am assuming the techs are coreect, but I don't know for sure.] The CAT5 ethernet cable from the modem goes into the WAN port on the AEBS. The computers all see the local wireless network set up by the AEBS.
However, when any of the Macs try to connect to the internet, the error message returns "No PPPoE server available." Resetting the modem and base station has not cured this. [n.b. Bypassing the AEBS completely by connecting the CAT5 cable from the modem directly to the Mac will provide internet connection.] Any other ideas? Sounds like both of us are having the same sort of problem.

Problem w/ my Airport Extreme Base Station & Canon i250 Printer

Hi All...
Well, I'm at my wits end...before I call AppleCare, I thought I'd post on here to see if any of you had similar issues or problems with what I'm having, and maybe a resolution(?)...
First of all, I've been using this same setup for the past 1 1/2yrs, and never had a problem with it until lately.
I cannot print reliabily over wireless to the Canon, only through the Ethernet/LAN jack.
Here is my setup...
- Airport Extreme Base Station (w/ telephone jack) and Firmware 5.7
- Powerbook G4 12" w/ Mac OS X 10.4.5
- PC Notebook (HP Pavilion ZV6000) w/ Windows XP and Broadcom 802.11b/g/128 Pre-N
- Canon i250 Inkjet Printer (was originally a free printer..worked very well over the years)
Originally, everything was working very reliably and I never had problems... I'm "guessing" something has changed (firmware?) that has caused any print jobs sent from either the PC or Mac to pause half way through a page and hang the printer. The computer (usually the Mac) will say it is having difficulty "reaching the Canon i250".
I've one a Hard Reset on the AEBS and that has not fixed it. I've not tried Interference Robustness yet but am not sure it will work. I do not have any problems using Wireless otherwise--only with printing, and nothing has change in the setup since I first got the AEBS (except maybe firmware).
Does anyone have any suggestions or insight as to what exactly could be the problem?
Is this a bug in Firmware that I'm not able to find?
Thanks so much for your response(s).

Delete your printer using Printer Setup Utility and
add it back. Does the performance improve?
No it didn't... I deleted, re-installed twice and still nothing new...
However, if I'm printing directly from my tower (WinXP Tower) over LAN, it works fine...but does not work at all through wireless.
For a year or so, I've never had a problem and nothing has changed in this setup. I think the culprit might be the last AEBS firmware update.
I've troubleshot everything I can think of and still having issues printing...

Airport extreme base station doesn't show up on network?

I just set up a wireless airport extreme base station to my PowerBook G4 and hooked my printer to it. All good. I also set up a new iPad wifi, and that also is good. I'm just wondering why the base-station doesn't show up in Finder Network? Any ideas? The Network says Neighborhood, but nothing happens or shows up, when I open it.

this did not solve my questions.
Your question was.......I'm just wondering why the base-station doesn't show up in Finder Network?
We provided answers specifying when the Extreme would and would not appear in the Finder.
As for the "why", here you are asking about design decisions that have been made by Apple. No one on a user to user forum will be able to answer for Apple. If you want to pursue this, you will need to contact Apple directly.
Looks like John Galt has it covered as far as the hard drive question.

Help - Kodak 5300 printer doesn't work w/ Airport Extreme Base Station

Similar Messages

Maybe you are looking for