HELP! Major error [cpp-1014] and on a deadline.

I'm six months in to a large history/documentary of our church. The project is eighteen minutes in length with multiple After Effects/Photo Animation etc. There are large amounts of old photos and videos from various media. I've made several projects like this before, but never one this large and detailed.
The showing is in two weeks.
I'm suddenly getting the error message "Premiere Pro has encountered an error. [/Volumes/BuildDisk/build/slightlybuilt/shared/adobe/MediaCore/ASL/Make/Mac/.../.../Src/T imecode.cpp-1014.}
I've tried using the backup drive instead/repairing permissions/using autosaved files created before I had the problem/running the project on two separate computers.
I've run out of ideas. Please help soon.

Hi and thanks for your reply... I will try dragging the .Mail folder -which i will need to locate the whereabouts of within the System -onto Email Extractor...
I know what you mean re: possible duplication- however, i know for sure that in the Gmail archive there are definitely tons more unique emails than it is listing after it runs its data-extraction - and it also gives a count of duplicates as it reports the total. Weird thing is, it does indicate from one account, some 5000
unique emails...tho as i say, the .txt file it generates that's supposed to reveal all those names - shows only a small fraction of that quantity....
Dunno if it's a glitch - thought maybe it was a demo version that only would show "X" number of results - but the "About" info for this app. says it is registered - ((bought it a few yrs ago and haven't used since '08 election season)).

Similar Messages

Help major error!!

I'm getting this error message when I try to delete one cut on my timeline, then adobe crashes. Can anyone shed any light. I am on a tight deadline and honestly don't know what to do;
[/singlebarrel/releases/2014.03/shared/adobe/MediaCore/Backend/Src/Sequence/Action/TrackIn foChangedAction.cpp-88]
it then says major error adobe must close.

You could try creating a new project and importing the old one into it. That sometimes fixes errors like this.

Help with "Error syncing Audio and Midi" message. How to fix?

Hi,
I'm running Logic Pro 7.1 on a G5 Dual 2.5 PowerMac. My audio interface is a Digidisign Digi002R, and my MIDI interface is a MOTU Fastlane. Up until a few days ago everything was working fine. I didn't install any new software or anything.
All of a sudden in any Logic session I open (new or saved) I get all kinds of artifacts that sound like they're associated with sample rate problems.
True to form, on playback after 4 or 5 seconds a message comes up telling me that there is an error syncing audio and midi. It tells me that a sample rate of 88209, or 88213, or 88207 (each time it's different) was detected, and that there is a conflict between Logic and my external device.
My Digi002R is set to 44.1, and Logic is set to 44.1 as well. I have no idea where this problem came from.
The only thing I do know is that I've been using the Peachtree Press Apple Pro Training Series to study for my Level 1 Logic certification. it comes with a CD with Logic sessions to use with the text. The CD comes with a Logic Epress Demo but I didn't download that as I've already got Logic Pro. I dragged those session files to my desktop, and the problem occured for the first time when iopened up that first session from the CD. After that, every single session has this problem and I have no idea how to fix it.
Sorry for the incredibly long message, but can anybody help?
Thanks
PowerBook G4 15", PowerMac G5 Dual 2.5 Mac OS X (10.4.7)

Hey,
Thanks. I appreciate the help, but I've tried all of that. I just don't get it. I've unplugged everything, I've shut down, powered down, relaunched everything a dozen times and the problem doesn't go away. I know that the problem is with Logic because the interface works perfectly fnie with everything else, from Pro Tools to iTunes.
I'm having Logic Pro 7.2 shipped to me so I'm hoping that installing that will reset everything, but until then I can't do anything in Logic.
Anybody ever encounter anything like this?

Please help have error code 1013 and can not restore iphone 3gs

i have tried every thing i can find to restore 3gs and no luck
tried 4 different computers and 3 cables and all the usb ports on the computers
i have even tried the gs.apple.com fix and no go.. am at a loss on what to do next any help
would be great thank you all

Every time I restore I get a different code last 2 times I have gotten code 1002
And 1013 a few times.
Error 1002 usually means a hardware problem. If you've tried several known working cables, the problem is likely in thte phone itself.
+"Error 23, 28, 29, 40, 1002, 1011, 1012, 1014, 1611: These errors may indicate a hardware issue with your device. Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue."+

Help with errors REP-0065 and REP-0200

Since one day I have received this errors while I run several reports.
It's very strange because since that reports had run fine. We have 2
DB instances and at one they run fine but at other I always have received
these errors (since one day).
Error says that report builder is runnin out of virtual memory but I have
256 MB RAM and I know that they used to work at weakiest PC and
they still work at the same PC when I connect to the second instance.
I haven't changed any DB parameters (if I remember) and these errors
should be report builder related not DB anyway.
I am completely clueless.
Does anyone of you have ever received these errors ?
Any help or suggestions would be greatly appreciated.
Thanx
David

Normally these two errors occur when the program runs out of memory.
You said when connect to one instance of database, the builder works fine; when connect to another instance of database, the builder gives above errors. It looks like to me it is database data related problem.
Please use sqlplus to log on to these two database instance, issue the same query as in the report, check whether both returns the same amount of data. I suspect somehow the second database instance contains substantial more data than the first instance.
Thanks,
-Shaun

Help with Error on tomcat and java servlet

i've just recently installed Dialect Payment client onto my server and is using Java to correspond with the server. I can run the diagnostic test run perfectly fine but when I have compiled the form and the app, I keep getting the error:
javax.servlet.ServletException: Invoker service() exception
     org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:478)
     org.apache.catalina.servlets.InvokerServlet.doPost(InvokerServlet.java:170)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     filters.ExampleFilter.doFilter(ExampleFilter.java:149)
root cause
com.qsipayments.utility.AssertionError: InvalidConfigException can only be thrown on reload
     com.qsipayments.utility.Assert.shouldNotReachHere(Assert.java:246)
     PaymentClient.util.PCConfigurationService.getConfiguration(PCConfigurationService.java:72)
     com.qsipayments.utility.logging.Logging.initialise(Logging.java:198)
     PaymentClient.PaymentClientBase.initialiseLogging(PaymentClientBase.java:1179)
     PaymentClient.PaymentClientBase.<init>(PaymentClientBase.java:106)
     PaymentClient.PaymentClientImpl.<init>(PaymentClientImpl.java:26)
     Java_3DS_3P_AuthPay_DO.doPost(Java_3DS_3P_AuthPay_DO.java:116)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:420)
     org.apache.catalina.servlets.InvokerServlet.doPost(InvokerServlet.java:170)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     filters.ExampleFilter.doFilter(ExampleFilter.java:149)
If anyone can help or advise me on this matter, it would be incredibly fantastic! I've tried asking the people who have provided me with the program but they dont seem to have anything useful that i can do to fix the error. I was told by my server admin that it was in the coding, but they claim that it has nothing to do with the coding.
PLEASE HELP.I've been working on this for months and about to die from frustration!

I haven't worked with this vendor product, but here are some ideas you might find useful:
It appears is a configuration problem when using the vendor software (but they already told you that, didn't they!!!).
I say the above because these lines in your printout are from vendor supplied objects (that you didn't create):
com.qsipayments.utility.AssertionError: InvalidConfigException can only be thrown on reload
com.qsipayments.utility.Assert.shouldNotReachHere(Assert.java:246)
PaymentClient.util.PCConfigurationService.getConfiguration(PCConfigurationService.java:72)
I suggest creating a brand new project with the simplist use of the above vendor project and get it to work.
You can use the vendor's (on line) documentation to do this. Deploy it in production to ensure there are no deployment issues. Work closely with one of
your fellow employees (more than one pair of eyes can pick up stuff that you miss). Next, look at what features of the vendor software the originial project uses and what features the sample project uses. Try to implement a subset of functionality of the orginial project into the sample project and get that to work. Implement the next feature, test, etc. Do small experiments at a time so you can easily isolate what doesnt work.
If none of the above works for you, try contacting the manufacturer or thier support web site. If none of the above works, look into using a compeditors product.

Need help with Error Code 205 and installation

not installed on my computer the premier adorbe cs6 , code 205 appears
Message was edited by: Kevin Monahan
Reason: please enter a better title next time

Hi Gyrus,
See if this doc helps you: https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
Thanks,
Kevin

How to fix error codes 9808 and 1202?

I need help fixing error codes 9808 and 1202, can anyone help PLEASE!!!!!

This alert is often caused by a perceived security issue due to higher than expected security settings.
-checking if date and time is correct will usually fix this issue.
also, it may help to disable your security sofware.
hope this helps

Help with the awful Timecode.cpp-1014 crash

Hello dear fellow Adobe users.
First the technical layout:
Hardware: iMac (Late 2012 - 27") 3,2 GHz Interl Core i5 - 8 GB 1600 MHz DDR3.
Project HDD: LACIE 8TB Raid-disk connected with Thunderbolt.
Software: Running Premiere Pro CS6 (6.0.0 - Mighty Kilt) on OS X - 10.8.5 (12F45)
I've edited a documentary now for over 6 months on this machine, adding various media types but mainly sticking to my standard Quicktimne Prores LT and HQ. The sequence is a standard DSLR-preset (1080p - 25fps) but I've been adding media with mixed framerate and audio-specs. And this has worked like a charm for 30 versions (incremenally saved project files).
Suddenly today, this following message starts popping up:
Premiere Pro has encountered an error.
[/Volumes/BuildDisk/builds/mightykilt/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../.. /Src/Timecode.cpp-1014]
I gathered yesterdays project-file from an online backup system I'm running, but to my dismay - the same message appears shortly after I start editing again. I've even tried to open even older versions of the project, with the same error encountered.
So far, I've tried:
* Deleting the temp/cache files
* Reinnstalling Premiere Pro CS6
* Rebooting several times
* Unplugged all USB-peripherals (project disk excluded)
If anyone has anything that can guide me out of this nightmare - I would appreciate it tremendously.
All the best from a desperate Premiere-user from Norway

Update for anyone else who's struggeling with this:
Nothing worked. I tried everything under the sun and the program version seemed to fail with the project file - even old versions of the project! So I guess it had something to do with all the different media (formats, timecodes and filetypes). Still a horrible and quite serious error on Adobe and Premiere's part - not having the backbone to handle such a error when it occurs. For any reason, you should get really concrete reasons why a project fails and a solid way to fix it.
Here, it just said; "Timecode.cpp-1014". That is really a unprofessional way to behave, being a professional software.
After installing the CS6.0.5 update, the same error occured every time. But after installing CC and importing the project there, I'm happy to repport that I've not had one crash or error-message.
Maybe it was all a way to get me to buy the CC-version. Who knows. My iPhone always seem to get a faulty battery a couple of weeks after the new version arrives...
So conclusion: the project will open and work in CC, but continues to fail and crash in all versions of CS6 on multiple machines.

Premiere Elements Timecode.cpp-1014 error when adding media

Software: Premiere elements 11
Camera: Sony DCR TRV22E
OS: Windows 7
When selecting add media I get: [..\..\Src\Timecode.cpp-1014] error multiple times, when the capture window eventually comes up it says the capture device is offline.
This happens not only when the camera is connected and powered but also when camera is not connected.
I have tried the different IEEE1394 drivers available in windows 7 and none of them work.
          1394 OHCI Compliant Host Controller
          1394 OHCI Compliant Host Controller (Legacy)
          VIA 1394 OHCI Compliant Host Controller
The connection to the camera through firewire is ok because I can download video from it using Nero Video Essentials, I just cannot do it through Premiere Elements 11.
Message was edited by: foradobeuse
Oops, I put the wrong error code in the title, it should be timecode.cpp-1014

There is absolutely no reason you can't use this camcorder with Premiere Elements. It's a miniDV! There's clearly something going on with your computer that's unrelated to Premiere Elements.
For instance, this appears to be a European camcorder. Is your program installed for PAL rather than NTSC? It's an obvious question but one that needs to be asked.
Also, PLEASE try using the free program WinDV to capture your video over a FireWire connection. If it does,we know something is wrong with your Premiere Elements installation. If not, we know it's something more basic.
Nero, by the way, it notorious for not sharing certain hardware resources. I've never known it to block access to the FireWire -- but I suppose it's possible.
So, please, instead of just flipping off Premiere Elements, do a little basic troubleshooting. Problems with a FireWire/miniDV capture are virtually unheard of, and I'm really curious what's going on with your system!

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

I get error 0x80073cf9 now and I need help to FIX Windows Store can't update any Apps & can't install any Apps now?

Hi I hope some one can tell me step by step how to fix windows 8.1, I can't update any of my Apps and can't install any new apps now and I get error code 0x80073cf9? But my problem is different than most of the other FIXES I read about, because nothing
fixes my problem to be able to install new Apps and get app updates and stop getting that error code?
I keep getting same error code 0x80073cf9 after I try any of the FIXES I have read about and tried all the fixes on my Lenovo Z580 laptop, that came with windows 8 and updated to 8.1. And ever since I bought this laptop I could
always install and update all my apps for the last year when I had Win 8 and Win 8.1 now.   This has been going on since April and May and its driving me crazy!    And from the May updates I did get all the updates and
I also installed the KB update that said I need this KB to get all updates in the future.
But all the other people when they get this error code they could not even open and use any of their Apps already installed. And they also get the error code when they try to update or get a new apps.
But I can click on any APP installed already and use all my Apps with no problems.   I have read so many how to fix this error code but nothing works! :-(     I have tried a lot of
the fixes on Microsoft forums that says do this and the fix will get rid of the error code but I keep getting the same error code after I try that fixes.   And I have read a lot of other windows 8 an windows 8.1 web sites when
I search for how to fix this error code?   And tried all of the fixes that were different from the Microsoft forum fixes. But after I try those fixes I still can't install any apps or can't get my app updates?
Please to any person's who can help me by giving me more that 1 fix, because I have tried so many fixes, If you know more that 1 fix tell me how to do your fix step by step so I can understand what you say to do to fix my windows store?
Thanks for any and all help? And if I don't get any help in this section of the forum I will try to put this in a different area, if I don't get any help at this section of the forum I will try to ask this in another part of he forum ok?
I really need HELP with this so I can get my laptop working again to install new apps and get the updates to my apps?

Fixed the problem by going to settings/store and logging out with apple ID. Then logged back in with password and updates, apps, and iTunes store seem to work ok now.

My iPhone 4 was disconnected during ios 5 update - now i have error -50 showing and cannot get phone back on. Help!

during IOS5 update my phone was disconnected from itunes. i reconnected it and continued the update by clicking 'continue restore'. Itunes is now saying the the phone is updated to version 5 and appears to have fully synced. however, when i turned the phone back on i have the set-up screen and when i select to restore the phone through itunes i get a message with options to 'continue restore' or 'delete backup'. when i select 'continue restore' itunes then gives me an 'error -50' message and just syncs the phone but nothing seems to happen - the phone does not do anything.
Should i delete the back up and start over, or will that delete all my contacts?
Any help is much appreciated!

Everything is Sorted!
The release of iTunes 11.0.2 and iOS 6.1.2 for my iPhone 4, seems to have sorted everything. I can now sync music, films and photos between my MacBook and my phone.
I was dubious about blindly doing the updates but decided they couldn't really mess up any further functionality so I went for it and it's sorted now.
Look in to, and take the gamble, it's up to you.

I need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009". and after they said "we could not complete your request. There was an error in the App Store. Please try again later (nul

i need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009".
and after they said "we could not complete your request. There was an error in the App Store. Please try again later (null)".
COMPUTER DETAILS: MacBook Pro 13-inch, Mid 2012 OS X Version 10.9.5; Processor 2,5GHz Intel Core i5; Memory 4 Go 1600 MHz DDR3.
Thanks beforehand!!!

Error
what is error code 1009?

Error message 7 and 6034. Have uninstalled and reinstalled iTunes 7 times and errors continue. Can someone help please? Been working on this for 4 hours.

Itunes updated on my pc and laptop and now I cannot open the program on either one. Running Windows 7 on both. Error number 7 and R6034 continue to pop up. I have uninstalled (6 times) all of the Apple programs, rebooted, reinstalled, etc. as badgerfan1101 posted but cannot open it on either computer. I even did a restore to an earlier date with hopes that would solve the problem. Any other ideas? Been working on this for 4 hours

Hey gardenqueen1,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

HELP! Major error [cpp-1014] and on a deadline.

Similar Messages

Maybe you are looking for