HELP on CUPS

No job is print out. I turned log level to debug, here is part from error)log: is it saying job 18 is cancelled? there is no obvious error in the error_log. Please help.
PageSize = [ 612 792 ], HWResolution = [ 300 300 ]
HWMargins = [ 18.000 36.000 18.000 36.000 ]
matrix = [ 4.167 0.000 0.000 -4.167 -75.000 3150.000 ]
UpdateJob: job 18, file 0 is complete.
CancelJob: id = 18
StopJob: id = 18, force = 0
StopJob: printer state is 3

If the persons submitting the concurrent request want the output to print on the Epson printer sitting beside them,
i don't think central linux cups print server will save you from doing the 200x printer setup.
You have to configure 200 printers.
lp -c -d$PROFILES$.*PRINTER* -onobanner $PROFILES$.FILENAME
the PRINTER refers to the individual printers, some sitting beside each workstations.
But if what you have is several AIX servers each running concurrent managers (PCP), then you could install cups on aix,
setup 200x on one aix and [ copy the cups printer definitions|http://joeyski.wordpress.com/2009/06/23/howto-duplicate-printers-between-linux-systems/] into the other aix.

Similar Messages

Help : Récupération des infos dans XML

Bonjour à tous,
Je débute en Labview et j'ai une question par rapport à la récupération des informations dans un fichier XML.
En effet, j'ai un fichier XML que je considère comme un tableau de chaînes de caractères. Maintenant, je dois récupérer la valeur de la dernière ligne de ce fichier, situé juste avant la balise de fermeture XML </LVData>, je ne connais pas la taille de XML car elle est pas fixée.
Quelqu'un peut m'aider sur cette question? Merci d'avance
Zuzu

Je ne connais pas très bien la syntaxe XML, mais il y a un exemple dans LabVIEW qui te permettra certainement de faire ce que tu veux.
En faisant une lecture simple de ton fichier XML, il te suffit de connaitre le type de données à lire (tableau de valeur numérique dans ton cas).
Help >> Find examples... >> onglet "Search" et tu tapes XML
Ensuite, une fois que tu as ton tableau tu fais ce que tu veux...
soit une lecture de la taille et pour ensuite lire l'élément d'index "taille-1"
soit tu fais un "reverse array" après quoi il te reste à prendre la valeur d'index 0.
J'espère que ça t'aidera...
Message Edité par TiTou le 10-05-2006 11:14 AM
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

[SOLVED] I need some help fixing CUPS, it stoped working

hello i'm new here and have been trying to figure out what happended to cups. I installed Arch yesterday and after following the wiki, i had cups working and connected to my ubuntu server( where my printer is) i printed a test page and it was working. this morning cups is not working anymore, i had turn off my computer. the cupsd daemon is in my rc.conf file, but when i do
/etc/rc.d/cupsd restart i get the following:
/etc/rc.d/cupsd: line 6: /etc/rc.d/functions: No such file or directory
/etc/rc.d/cupsd: line 6: /etc/rc.d/functions: No such file or directory
/etc/rc.d/cupsd: line 38: stat_busy: command not found
/etc/rc.d/cupsd: line 44: stat_fail: command not found
/etc/rc.d/cupsd: line 6: /etc/rc.d/functions: No such file or directory
/etc/rc.d/cupsd: line 15: stat_busy: command not found
/etc/rc.d/cupsd: line 21: /usr/sbin/cupsd: Permission denied
/etc/rc.d/cupsd: line 24: stat_fail: command not found
i don't know how to fix it. when i go to http://localhost:631 i'm unable to connect.
this is my /etc/rc.conf :
# /etc/rc.conf - configuration file for initscripts
# Most of rc.conf has been replaced by various other configuration
# files. See archlinux(7) for details.
# For more details on rc.conf see rc.conf(5).
DAEMONS=(syslog-ng network crond sshd acpid dbus alsa cupsd)
# A reasonable DAEMONS array when using sysvinit is:
# DAEMONS=(syslog-ng network crond)
# When using systemd, it is recommended to only enable daemons that
# do not have native systemd service files.
# Storage
# USEDMRAID="no"
# USELVM="no"
# Network
interface=eth0
address=
netmask=
gateway=
# Modules
MODULES=(fglrx dbus pulseaudio equalizer microcode)
I can post anything you guys need me to post here, sorry if its not enough information, i'm still new to linux all together. thanks for the help.
Last edited by lazarojhr16 (2012-10-22 17:06:00)

bhrgunatha wrote:
lazarojhr16 wrote:
pulce wrote:
I see on the home page that new installation use systemd by default. Try
# systemctl start cupsd.service
Ok that worked. So this means I'm using systemd. Now my question would be how can i make it start on boot because i have the cups daemon (cupsd) on the rc.conf file. but it doesn't start on boot. Thanks for all the help.
To get it to start on boot run:
systemctl enable cupsd
or if that doesn't work
systemctl enable cups
For some reason on my system I have to use cups NOT cups**d**
thank you. After reading up on systemd I did systemctl enable cupsd and is not working, you saved the day, the second one works (using cups not cupsd)

Need help with CUPS on 11.5.10 cu2

We are running our EBS 11.5.10 CU2 on AIX servers and printing is a major pain point as we need to define 200 printers on each server. I want to install CUPS on a remote Linux server and have all the AIX servers print to the cups server.
There is documentation available on how to setup CUPS and then print to it locally. But I need help in understanding on how will I print from the AIX server to the CUPS server, in a nutshell what should I put in the Arguments section of printer driver:
lp -c -d$PROFILES$.PRINTER -onobanner $PROFILES$.FILENAME
or do I need to change the printer definition on the OS itself ?
Please share your expertise on this. Thanks

If the persons submitting the concurrent request want the output to print on the Epson printer sitting beside them,
i don't think central linux cups print server will save you from doing the 200x printer setup.
You have to configure 200 printers.
lp -c -d$PROFILES$.*PRINTER* -onobanner $PROFILES$.FILENAME
the PRINTER refers to the individual printers, some sitting beside each workstations.
But if what you have is several AIX servers each running concurrent managers (PCP), then you could install cups on aix,
setup 200x on one aix and [ copy the cups printer definitions|http://joeyski.wordpress.com/2009/06/23/howto-duplicate-printers-between-linux-systems/] into the other aix.

HP Deskjet F4440 not printing from cups, do I need ppd? Where can I find it?

Hello!,
I am trying to get my HP Deskjet F4440 connected to my linux server through the use of "cups". I am using Tiny Core Linux.
Linux box 3.16.6-tinycore #777 SMP i686 GNU/Linux
I have installed and configured cups.tcz. When I visit the cups admin page at 'localhost:631' and go to 'add a new printer', the HP Deskjet shows up and it guides me through the rest of the process. At one point it asks what make and model the printer is for what I assume is for drivers, or it asks for a ppd file.
I have tried searching for a PPD file for my printer but was unable to find it so I used what was avaialble... I selected 'HP' as the make and 'HP Deskjet series (en)' as the model. They did not have my model but I assumed it fell under this.
The printer gets added and shows up under the 'Printer' tab of cups. I set the printer to server default and clicked 'Print test page'.
Do I need a PPD file? How can I get this printer working?
It shows the print started with either 21% or 25% sometimes and then disapears. No error messages. No printed pages or activity from the printer.

Hi @Flawd009,
I can honestly say, I do not know the answer to your question, but perhaps I can help you find it.
I wonder if the following information would be helpful; OpenPrinting CUPS Quick Start.
If not, please remember I am out of my support boundaries and thought it was better to try and fail than not try at all
You might have better luck reaching out to the Linux Community, or the Linux website.
EDIT: I found 2 more links that could be helpful;
HP Linux Imaging and Printing
HPLIP software
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printer help / diagnostic to run?

Help! Not sure what has happened with my iBook, but yesterday I was printing fine with the iBook, but today I can only get one page of gibberish to print, followed by blank page after blank page, until I manually shut off the printer.
I have cleared all queues, deleted any old printers, and even reset the printer system, all to no avail.
Anyone have any ideas? Is there any diagnostic I can run to see if anything in particular is ailing my computer?
The only thing that has changed between yesterday and today is that last night I tried hooking up to my girlfriend's computer at home, and couldn't print to it, but I can't imagine anything could be related to that...
Any help is appreciated, frustration level growing exponentially...sigh.

Perhaps to try and re-install the printer software from the disc
included with the printer may help restore some functionality(?)
There may be something or another corrupted in the iBook's
system; so if you have a second user account, you could see
if that can be used to print documents using the existing driver
and printer software already in the computer. Some general
system maintenance may be performed which could help; such
as it is, with AppleJack and/or OnyX. These may not help the
CUPS printer system; there is a printer utility which may be in
the utilities folder. I don't think I've used it, but there is a tool
in the system to help with some issues. Maybe not this one(?)
And there also are several printer tricks (of which I do not know)
that likely may be out there, to be tried. So there yet may be hope.
Good luck & happy computing!

CUPS error: client-error-not-authorized

Hello,
some days ago I followed the wiki and installed a printer (HP Laserjet 1020) that uses the driver foo2zjs (from AUR). It didn't print anything in the beginning, but after blacklisting usblp module it printed a Test Page. Believing that everything was working fine, I unfortunately did not try to print any other document to check it.
Now, trying to print a document for the first time, the printer simply prints nothing, and the log file shows this error message: client-error-not-authorized.
There's no network here and the printer is connected directly to the computer. Both the regular and root users are included in the lp group. The hostname from /etc/hosts is localhost.
Here is a copy of cupsd.conf in case it may be helpful:
/etc/cups/cupsd.conf
# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn
# Administrator user group...
SystemGroup sys root
# Only listen for connections from the local machine.
Listen localhost:631
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS dnssd
# Default authentication type, when authentication is required...
DefaultAuthType Basic
# Web interface setting...
WebInterface Yes
# Restrict access to the server...
<Location />
Order allow,deny
Allow localhost
Allow all
</Location>
# Restrict access to the admin pages...
<Location /admin>
Order allow,deny
Allow localhost
Allow all
</Location>
# Restrict access to configuration files...
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow localhost
</Location>
# Set the default printer/job policies...
<Policy default>
# Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# Set the authenticated printer/job policies...
<Policy authenticated>
# Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
The only change that I made to the file was *allowing* some things (trying to fix it), but nothing happened.
And here is the CUPS error log after trying to print many times:
localhost:631/admin/log/error_log
E [23/Feb/2012:00:58:33 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:00:58:41 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:00:58:51 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:11:45 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:13:17 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:32 -0200] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:41 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:51 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:18:00 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:21:57 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:22:22 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:04 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:04 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:13 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:28 -0200] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:31 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:28:14 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:33:44 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
If you need any more details please ask!
Any help would be very useful!
Thanks!

Hello,
some days ago I followed the wiki and installed a printer (HP Laserjet 1020) that uses the driver foo2zjs (from AUR). It didn't print anything in the beginning, but after blacklisting usblp module it printed a Test Page. Believing that everything was working fine, I unfortunately did not try to print any other document to check it.
Now, trying to print a document for the first time, the printer simply prints nothing, and the log file shows this error message: client-error-not-authorized.
There's no network here and the printer is connected directly to the computer. Both the regular and root users are included in the lp group. The hostname from /etc/hosts is localhost.
Here is a copy of cupsd.conf in case it may be helpful:
/etc/cups/cupsd.conf
# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn
# Administrator user group...
SystemGroup sys root
# Only listen for connections from the local machine.
Listen localhost:631
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS dnssd
# Default authentication type, when authentication is required...
DefaultAuthType Basic
# Web interface setting...
WebInterface Yes
# Restrict access to the server...
<Location />
Order allow,deny
Allow localhost
Allow all
</Location>
# Restrict access to the admin pages...
<Location /admin>
Order allow,deny
Allow localhost
Allow all
</Location>
# Restrict access to configuration files...
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow localhost
</Location>
# Set the default printer/job policies...
<Policy default>
# Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# Set the authenticated printer/job policies...
<Policy authenticated>
# Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
The only change that I made to the file was *allowing* some things (trying to fix it), but nothing happened.
And here is the CUPS error log after trying to print many times:
localhost:631/admin/log/error_log
E [23/Feb/2012:00:58:33 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:00:58:41 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:00:58:51 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:11:45 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:13:17 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:32 -0200] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:41 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:51 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:18:00 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:21:57 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:22:22 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:04 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:04 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:13 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:28 -0200] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:31 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:28:14 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:33:44 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
If you need any more details please ask!
Any help would be very useful!
Thanks!

How do I combine PDFs into one document?

I want to scan CD booklets for online digital storage. I have Pages and Preview, of course. I do not have Acrobat Professional.
I have a large scanner and can make individual TIFs or PDFs of each spread. What would be the best way to combine these into one file?

etresoft,
Please don't read this as an actual reply to your post because it is not.
But, since the thread is dealing with CUPS-PDF and I have been desperately seeking CUPS-PDF for a long time ever since I've got my brand new iMac only 5 days ago (5 days on a new iMac [which is not only new but is intel-based, and which I was forced to buy because my older PPC iMac G5 died of preternatural or some other causes] is an extremely long time on account of Snow Leopard, about which I am like a babe trying to start speaking for the first time) I found it more expedient to "reply" in order to get some help with CUPS-PDF from someone who knows.
I've downloaded CUPS-PDF from "https://bitbucket.org/codepoet/cups-pdf-for-mac-os-x/wiki/Home" and installed it following the instructions included therein.
The only instruction I could not follow is to pick "Generic postscript color printer"; I could pick "Generic postscript printer" though.
CUPS-PDF shows in the printer list.
CUPS-PDF apparently prints as indicated by the progress bar.
But, the print doesn't show anywhere on my computer:
The output is not in /Users/Shared/CUPS-PDF in a folder with my user account's name.
I did make an alias to this folder on my desktop but it only contains two folders: "my user name" and "SPOOL"
The first folder had a "clone" of the download source page (which I deleted.)
SPOOL has nothing in it.
I've never had a problem using CUPS-PDF while on OS X 10.4.11, something I'll never be able to revert to.
I'll be eternally grateful to you if you could help me with this issue but, on condition that you use a language as plain as English since my expertise with OS X, which was never as considerable as to be able to use terminal to any advantage, nor understanding terms such as sudos and the like, is now even diminished on account of the new OS I am forced to use from now on.
Thank you so much for your help and excuse me for using this approach to ask for help.
Best regards,
Ruben

My Epson Stylus RX700 is no longer supported...any ideas?

Upgraded to Lion today and can't get my Epson Stylus RX700 scanner to open anymore b/c "PowerPC applications are no longer supported"...and doesn't seem to have what I need on the Epson page...

Giday there connect4mary, I had printing issues after installing Lion with an Epson TX650 Photo. On the manufacturers website there was no up to date driver however the printer was showing there in Lion but somehow data wasn't being retreived by the printer. I managed to install a Epson SX650 - CUPS+Gutenprint v5.2.7 and it works perfectly. Hope this helps. CUPS+Gutenprint may also help with other brands.
http://gimp-print.sourceforge.net/MacOSX.php

Automatic Creation of Roles and Role Mappings in GRC

Hi,
we are planning to use SAP Identity Management and SAP GRC Access Management.
In SAP IDM we have defined several business roles that contain privilieges in SAP systems. When a user is requesting a role, the request will first be sent to SAP GRC for approval and risk checking.
In order to get this to work, we need to load the business roles of SAP IDM into SAP GRC and we also need to configure the role mapping between the business roles and the technical SAP privileges.
From what I understood, this could be implemented by loading the required information via Excel filles into SAP IDM.However, this is a quite cumbersome and error-rpone approach an we would like to automate this.
Is there a way to use e.g. web service calls to create/delete roles and role mappings in SAP GRC?
BTW: is a documentation of all available GRC web service calls and their parameters available?
Thanks for your help in advance!
Best regards
Tom

Hi Tom,
as stated before, the web service description is in the config guide.
Unfortunately there is no web service to create roles or even mappings in CUP - this is one of many I would also like to se created
I don't think in your context you will be able to directly send Business Roles to CUP. The role mapping only happens after you send the request, so I'm not sure if that's in time for risk analysis - you will need to try that.
Are you a customer or a consultant - anyway, feel free to contact me if you need further help integrating CUP and IdM. This is an evolving interface with many possible scenarios, so it's not easy to give you good advise without seeing the full picture.
Frank.

More Rx power than Tx on SFP DOM

Hi everyone,
I actualy use 2 cisco catalyst 2960 24TC-L, both with one SFP (AXCEN AXGD-5854-0511 SFP-1000SX-DD), with 2 fiber (TX RX) 50/125 between, 15m lenght.
My goal is to monitor the power of each link, but i have more power on RX than TX...
My case for exemple :
          - TX switch 1 : -6.2dBm
          - RX switch 1: -5,7dBm
          - TX switch 2: -6,9dBm
          - RX switch 2:-4,8dBm
I run iOS 15.0 on both.
I havn't found any problem like that on the net.
Is this normal ? Recurrent on this hardware ?
Any suggestion ?
Thanks for your help
J-C

Up ?

Help Needed in Fixing USB Printer after CUPS Update [SOLVED]

CUPS updated a while ago but I didn't notice any warnings from pacman or whatever. I did later notice on the front page that cups had been upgraded so that usblp is no longer usable. It told me to blacklist usblp, and so I did. I also upgraded the /etc/cups/cupsd.conf file as per the instructions.
I still cannot print.
When I plug in my printer, I get the following in /var/log/messages.log:
kernel: usb 5-1: new full speed USB device using uhci_hcd and address 2
kernel: usb 5-1: configuration #1 chosen from 1 choice
load-modules.sh: Not loading module 'usblp' for alias 'usb:v03F0p1D17d0100dc00dsc00dp00ic07isc01ip03' because it is blacklisted
Any help would be greatly appreciated.
Last edited by egan (2009-10-18 17:13:15)

jt512 wrote:
See http://bbs.archlinux.org/viewtopic.php?id=82489
There are like 4 other threads on this topic. Did you do a search?
I did indeed, though the solutions presented seemed quite convoluted.
Luckily, I have printing working by readding the printer.

HELP! canon ip1800 printer stops after cups update

Hi All,
After the recent cups update to 1.4.1-1, my little canon pixma ip1800 printer does not work.
I had used a couple of old debian packages to get the printer working when I first bought it: cnijfilter-common and the cnijfilter-ip1800. By using the deb2targz utility to unpack the debs, I was able to just write a short shell script to install the driver, which has worked well for ages.
I downloaded the AUR cnijfilter packages for this printer, installed or built all the dependencies, removed the old debian based printer driver and installed the AUR packages.
However, after a reboot, when I used the cups admin page (http://localhost:631) and tried to install the pixma ip1800, I keep getting the same error:
Bad device-uri "cnij_usb:/dev/usb/lp0"
I just don't understand why the AUR driver is not working, both parts built ok-any ideas?
I need this printer working again! Help.
Cheers for any help.

I have the same printer. In addition to the steps outlined in the news entry I had to delete the printer from the cups admin panel and re-add it. Of course you'll have to redo any customizations you made to the ppd file so before you do this you may want to make a backup of that printer's ppd file (ie. /etc/cups/ppd/ Canon_iP1800_series.ppd ) to reference later.

Canon LBP6000/Linux/Drivers/CUPS/Installation Problems/Help

I'm working on installing these drivers, http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_printers/imageclass_lbp... the "CAPT Printer Driver for Linux Version 2.60". My distribution is Arch Linux, and my print software is CUPS. I've been at it for a couple of days now, and am pretty familiar with with all the terms, variables, and commands; I think the main problem is that some of my command line settings and other random printer options/preferences are filled in with the wrong choices.
Anyone wanna help me sort this out?

Hi Suzanne,
I'm also based in Hong Kong with the exact same printer I bought from Broadway the other day. I had the same problem as you describe when I tried to install it earlier tonight, but now I've got it working.
Once you have the driver installed and the printer connected and turned on, open any printable document, then:
File > Print
Choose "Add Printer..." in the Printer dropdown menu
You will see LBP6000/LBP6018 in the box that appears. Ignore it. Instead, click on "More printers..." in the bottom left corner of the same box.
Another box will appear with a dropdown menu at the top, giving you two choices. Choose "CANON USB (CUPS CAPT)," which will give you the model number again. Click on it, then "Add," and voila!
Hopefully, this will save you the angst you will likely suffer from calling customer support (funny how that has become an oxymoron...)

ActionScript 3 help, shuffling arrays: shuffling 3 cups.

Hi, I'm having a problem with this file. It's meant to shuffle 3 cups but I get this error: TypeError: Error #1010: A term is undefined and has no properties.
at cupsc_fla::MainTimeline/frame1().
It was working in AS2 but I changed it around to get it to work for AS3 but now it won't work.
Here's the code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import flash.events.*;
var posArray:Array = new Array(cup0.DisplayObject.x, cup1.DisplayObject.x, cup2.DisplayObject.x);
move_mc.addEventListener(MouseEvent.CLICK, pressBtn);
shuffle = function (targetArray) {
for (i=0; i<targetArray.length; i++) {
var tmp = targetArray[i];
var randomNum = Math.random(targetArray.length);
targetArray[i] = targetArray[randomNum];
targetArray[randomNum] = tmp;
function pressBtn(e:Event) :void{
shuffle(posArray);
var tween0 = new Tween(cup0, "_x", Strong.easeIn, cup0.DisplayObject.x, posArray[0], 1.5, true);
var tween1 = new Tween(cup1, "x", Strong.easeIn, cup1.DisplayObject.x, posArray[1], 1.5, true);
var tween2 = new Tween(cup2, "x", Strong.easeIn, cup2.DisplayObject.x, posArray[2], 1.5, true);
I'm stumped!

There are a number of potential issues with the code as you show it.
cup0.DisplayObject.x, ??? what are these
shuffle = function... change that to be written just like your pressBtn function
Math.random(nothing goes in here)... should be Math.random()*targetArray.length, although you want to get an integer value out of it, not a decimal value
As far as the 1010 error goes, go into your Flash Publish Settings and select the option to Permit Debugging. That can help by adding the line number of the offending code to the error message.

HELP on CUPS

Similar Messages

Maybe you are looking for