Help on tracing flow of file in httppost

hello ppl...
am havin problem in posting file(s)..
my doubtz r...
-all examples in net give the file path as file name...so i did da same..but i got the length of body as zero..so i tried a full path address but in vain it gav me same result
-this.req.getData() gives a byte array of "web.xml" or "d:\web.xml"
-((PostMethod)this.method).setRequestBody(new ByteArrayInputStream(this.req.getData()));
this prob aside the basic concept is not clear 4 me...where does the filedata we post get written to???????
hmmm how do i write the file data to a html...
any suggestion is eagerly awaited........

1) There is no PostMethod class in any of Sun's APIs, so I don't know what you're doing
2) Your problem is still not clear to me, regardless of the encryption ;)
3)> hmmm how do i write the file data to a html... - what is that supposed to mean?

Similar Messages

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

ITunes No Longer Runs--iTunes Helper Resources Not a Valid File Name

I made a dumb mistake (I think) and tried to install iTunes onto an SD card. At first, my computer would only let me open iTunes if the SD card was installed. I tried to reinstall to the C drive, but keep getting the "I Tunes Helper Resources not a Valid File Name" message. At this point I want to uninstall everything and start over, but I'm afraid I'll lose my music. I still have all the files but, of course, none will open since I don't have a properly installed iTunes anymore. Would appreciate any assistance in uninstalling, reinstalling and saving my current music files.

Here's what I decided to do. Fortunately, all the files were still available, so I simply backed them up from my iTunes Music Library onto a 32 GB flash drive then transferred the new stuff onto an older computer in my office with an older version of iTunes. I had to do this in several shifts since I have more than 32GB of music. Everything that transferred plays well. Next I'll try to wipe iTunes completely off the new computer, reinstall an older version of iTunes and then reload all the files onto the new computer. What a PITA!

Validation and F4 help on an application server file path parameter

Hi
I have a field on a selection screen called File Path and it is for a download program where the user needs to specify the path for the download (NOT THE ACTUAL FILENAME).
I am trying to find a function or method that allows a user to use F4 help to browse for a directory rather than a specific file. There are lots of posts out there asking this question but all of the answers point to functions that allow you to browse for a particular file rather than just the file path/directory.
Does anyone know of a function that provides F4 help to browse for a file path on the Server (NOT PC). I would want the user to just be able to select the directory or path and have the path returned. They should not need to pick a specific file.
F4_DXFILENAME_TOPRECURSION is a very good function but unfortunately it makes the user pick a file rather than just a directory.
In addition to this, does anyone know of a function or method that allows you to then validate the path\directory that is entered?
Thanks for your help
Nicole

Hi,
You can try with the FM 'EPS_GET_DIRECTORY_LISTING'. With this Fm module you will get you the list of files of a particular path in an internal table. Then you can populate this internal table in F4 help.
Hope this solves your problem. If any difficulty, come back to me about that.
Below are some other FM related to application server directory. Hope these Helps.
EPS_GET_DIRECTORY_LISTING
EPS_GET_DIRECTORY_PATH
EPS_GET_FILE_ATTRIBUTES
EPS_GET_FTP_SYSTEM_INFO
Regards,
Shailesh Jadhav

HELP - I deleted an adobe file that I saved to a memory stick and I need it back really badly :(

HELP - I deleted an adobe file that I saved to a memory stick and I need it back really badly

Try this Google search:
http://www.google.cl/#hl=es&tbo=d&sclient=psy-ab&q=free+data+recovery+software+for+flash+d rives&oq=recovery+software+for+flash+drives&gs_l=hp.1.3.0i30j0i5i30l3.9708.24161.0.34539.3 4.26.0.8.8.0.378.7320.2-21j5.26.0...0.0...1c.1.lb0o4diaEEU&pbx=1&bav=on.2,or.r_gc.r_pw.r_q f.&bvm=bv.1355534169,d.eWU&fp=ff7a879957bf69ba&bpcl=40096503&biw=1112&bih=865
It gave me plenty of hits, but be a little careful. I would suggest using the free trial of one of the paid products. As I have never used one, I cnnot recommand any.
And remeber: every time you write something on that flash drive, you risk overwriting your lost file, thus decreasing your chances of recovering it.

Help me please about export file is .wmv

help me please about export file is .wmv from final cut pro
It have black side at right and left in clip when export finished
I have flip4mac program in my mac
How do I edit.

Let me help getting your question back to something we might understand.
- You are exporting your video AS .wmv
and
- when you export it, there are black bars left and right of the image.
How do you fix?
Ok - what was the format of the video prior to your exporting it? When you edited it in FCP, what were the sequence settings? That will help get the right settings for flip4mac.
CaptM

Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an er

Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an error appears on the pages with video content?

its in german:
der Vorgang könnte nicht abgeschlossen werden.
something like the process coundnt be completed

Help to show a HTML file in Swing

Hiiiiiiiiiii,
During my development Me in a problem . Please help me out.
As per my current context of the project I have to develop a HTML page with Help of CSS and all other things. After that I have to Show the HTML file through Swing. I know how to attach a file with help of URL but need some help to show a HTML file in Swing.
*help to show a HTML file in Swing*

As camickr said Javascript support is not available. If you want to support you have to write code for that. Up to an extent CSS support is provided.
Sample code to display HTML pages in JTexPane (you can use JEditorPane as well):
Construct the URL:
URL url = YourClass.class.getResource("resources/Hello.html");
// If YourClass is in package test.html, then your html page must be available in .....test/html/resources directory.
// And your CSS files must be accessible from your HTML page. This you can test by simply opening the html
// page in your favorite browser.And then call setPage() method of HelpDataPane. Note that, HelpDataPane supports hyperlink activation.
import java.io.IOException;
import java.net.URL;
import javax.swing.JTextPane;
import javax.swing.event.HyperlinkEvent;
import javax.swing.event.HyperlinkListener;
* A pane to display help pages. Help pages are accessed as URL and displayed
* in this pane.
* @author Mrityunjoy Saha
* @version 1.0
public class HelpDataPane extends JTextPane {
     * Creates a new instance of {@code HelpDataPane}.
    public HelpDataPane() {
        super();
        this.addHyperlinkListener(new HyperlinkListener() {
            public void hyperlinkUpdate(HyperlinkEvent e) {
                if (e.getEventType().equals(HyperlinkEvent.EventType.ACTIVATED)) {
                    setPage(e.getURL());
     * Sets the current URL being displayed. The content type of the
     * pane is set, and if the editor kit for the pane is
     * non-{@code null}, then
     * a new default document is created and the URL is read into it.
     * @param page The URL to be displayed.
    @Override
    public void setPage(URL page) {
        try {
            super.setPage(page);
        } catch (IOException ex) {
            try {
                URL blankURL = YourClass.class.getResource("resources/Blank.html");
                super.setPage(blankURL);
            } catch (IOException ioe) {
                ioe.printStackTrace();
}Thanks,
Mrityunjoy

I need help viewing password protected PDF files on my tablet

I need help veiwing password protected PDF files on my tablet

Any free apps available especially for this purpose?
not that i know of. but i think _*Documents To Go*_ will be worth the expenditure.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

ITunes has gone apesh*t! Please help! (can't locate files)

Good day!
I recently installed iTunes 7 (a few weeks ago, I guess.) For the most part, it has been working fine. But tonight, when I opened iTunes, it asked questions as if it had just been installed for the first time.
Now, all my music is stored on an external hard drive (J: Drive), and it defaulted that it was in my "My Music" folder in "My Documents", so I fixed that, and that didn't solve my problem: It can't locate any of my songs. (Here's the weird part, it can play the handful of MPEG files I have, but not the 99% AAC files. Both types are on the external hard drive). It lists them, but can't locate them, and i don't want to tell it the exact location of almost 5000 songs.
I tweaked a bit with my "iTunes Library" music database file, but that didn't help. Does the XML file ("iTunes Music Library") have any purpose?
Help me out!

I'm having the same problem.
iTunes lost about 100+ of my songs. I can manually go through and fix them but I'd rather not go through each one and track it down. I can see what's wrong in the library xml file but fixing them there doesn't do anything.
I tried recreating my library files and iTunes completely lost the songs along with several podcasts and all my playlists. Thankfully I'd backed up the library files before trying this, so I'm back where I started.
The date sounds about right, was that when the update before 7.5 came out? I also noticed that iTunes had reset my library location around that time(caught it and fixed it though).

Unable to view help when press F1. CHM File too large?

We have a chm file who contained many PDF files (its size is
13MB) and some people cannot view help when press F1. This file is
a part of merged chm files structure (the total size of these files
is 17MB)
Do you think that the size of the file contained PDF may be
the problem?.
Thanks!
TTW_MaryseC

Maryse,
I don't think the size of the file should be an issue, even
when it's 13 MB. I'm sure that other people have been distributing
much larger files than this without problem for many years.
You say "
some people cannot view help", which suggests that other
users are not encountering the problem. In other words, the methods
that your software developers have used to connect the help file to
the application do work properly, if not for all users.
When users who cannot view the help press F1, does nothing
happen, or does the help viewer open but with an error message in
the right-hand topic pane? Is the large file the only one that is
affected by this issue, or are all the other help files in the
collection also affected?
If it's of any interest to you, you don't need to compile a
PDF file into a help file in order to display the contents of the
PDF in the help file. Microsoft has published the following script
for linking to an external file from a help topic:
http://msdn2.microsoft.com/en-us/library/ms644690.aspx
Pete

Help me to build control file

i have data file in .CSV format.
i need to upload this data into control file.
for this i wrote one control file.
my consern with date format in table.
in .csv file column B and C having date and time.
i want to merge this to columns as single column in oracle.onemore thing before date i have one extra character i need to remove that character also
example data in .csv file.
120060422 122544
220060422 122645
320060422 122744
please help me to write control file.

Open your CSV and insert a Column next to your date column enter formula
MID(Cell Number, Starting Position, Number of Characters to return)
Drag this formula till last cell select the column and Copy-> Paste Special Values
Then delete the original column
Also you can merge the two date columns in excel itself by using the formula
Concatenate(Cell A, Cell B)
Then you can upload this data.
Hope this helps.
Rajnish

Please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization

please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization

arai-c wrote:
I have full version of this software but I am not able to install it silently because it always gives Google toolbar pop up which We dont required
arai-c wrote:
the problem is we dont have msi file for 10.6.*.* and hence I am not able to create package for it
I don't understand; two days ago you wrote that you have it, now you don't...?
If you don't have it, then why not deploy the current version 12.1.3.153 - I don't see the point of installing an old, unsecure software version.

Help with converting a Nero file

I have previously converted a dvd insert designed with Nero into a pdf using adobe acrobat in order to send to someone else. When I tried to do the same thing today with a new Nero designed insert the conversion wouldn't work. The message said adobe didn't support the program that created the file. Any ideas?

thanks for your response.
When I create a dvd insert or cd label etc using Nero the file extension is nct - nero cover template. The printer wants the file as a pdf as he can't open Nero files. I have version 9.3 of acrobat.
Date: Mon, 18 Jan 2010 21:43:47 -0700
From: [email protected]
To: [email protected]
Subject: help with converting a Nero file
Nero is simply a CD/DVD burning application and should have no effect on the type of files that will eventually be on the CD/DVD.
What type of files are you trying to convert and exactly how are you trying to convert them? Plus, it would help to know the version of Acrobat you are using.
>

Help on tracing flow of file in httppost

Similar Messages

Maybe you are looking for