Help on Updating master table using SAP NetWeaver 2004s

Dear BSP ians,
I need to edit,modify multiple records and has to be updated in the master table using MVC. We are using SAP NetWeaver 2004s.
We have gone through the sample codings which is present in the forum already, and we have worked out using Pages with Flow Logic on ECC 6.0 and those are not getting exexcuted for "SAP NetWeaver 2004s".
Help me in this issue.
Points will be rewarded for helpful infos.
Gokul.N

My issue is, the sample codes present alreaady in the forums works in ECC 6.0
But we are using "SAP Netweaver 2004s"

Similar Messages

How to Upload Excel sheet in DB or internal table using SAP NetWeaver ABAP

Dear All experts,
Pls provide guidance to Upload Excel sheet in DB or internal table using ABAP in ( SAP NetWeaver stack )
Regards
Machindra
Edited by: Machindra Patade on Apr 8, 2010 3:07 PM

Please search before posting.
Thread locked.
Thomas

Missing data packages for PSA Table in sap netweaver 2004s

When we tryed to load the master data 0customer we have got the message
"Information Idoc: Sent, but did not arrive:
Missing data packages for PSA Table
Diagnosis
Data packets are missing from PSA Table . BI processing does not return any errors. The data transport from the source system to BI was probably incorrect.
We couldn't find any entries in source system.We have checked the tablespaces and authorizations.Its looks good.
WE have replicated and tryed again.But still getting the same error message.
we have SAP_BASIS
Release 700,level 0008, Highest SAPKB70008 basis component.
pls help us with the solution.
Thanks in advance.
-Soujanya

Hi
1) goto BD87 Tcode... take ur Idoc number and check the status of the idoc if it is 64 .. just process it manually ....
2) go to the TRFC in Datawarehouse and execute the LUWs manually ..
hope it helps
regards
AK
************assign points if usefull******

Updating A z table using sap xi

Hi,
I am new sap XI would like to update a z table using
sap xi.The dataset is a flat file as test exercise.Can
anyone tell me how to go about it .

Hi Deepak,
You can also go for abap proxies (server)
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/frameset.htm
Hope it will be helpful.
Regards
Suraj

Update a table using MODIFY

Hi,
We need your help.
We want to update a table using the MODIFY command but it does not delete the previous entries instead it INSERTs a new entry.
Scenario:
1. Upon calling the Screen for Editing the entry, the previous entry must be deleted
2. When SAVEd, the new entry must replace the previous entry.

Make sure that in the definition or your table you have specified the key. Otherwise, the system may "think" that all the fields are part of the key, therefore all lines are different.
This is a extract from SAP's documentation:
"The line to be changed is determined by the fact that the content of the table key matches the content of the corresponding components in the wa work area. For tables with a key that is not unique, the first entry that is found is changed. "
Regards.

Reg: Modification of Master Tables using BDC/BAPI

Dear All,
Thanks for Support shown from all of you.
I want the detailed procedure for Modifying the existing data in the Master Tables using BDC's / BAPI's and Dialog programming.
Please send me one example code.
Please Help me Out.
Thanks In Advance.
Regards,
Adinarayana.B

bapi example
REPORT ZMMR_DELETEPO NO STANDARD PAGE HEADING MESSAGE-ID zisb.
tables : zvtls_sap.
*C-- Types Declarations
TYPES : BEGIN OF tp_flatfile_vtls,
        ebeln(10),
        ebelp type ekpo-ebelp,
        END OF tp_flatfile_vtls.
*=====================================================================
                  INTERNAL TABLES DECLARATION
*=====================================================================
DATA: t_flatfile_vtls TYPE tp_flatfile_vtls OCCURS 0 WITH HEADER LINE.
data : begin of t_sapdata occurs 0,
       po like zvtls_sap-posap,
       item like zvtls_sap-itemsap,
       end of t_sapdata.
data : begin of t_flatfile_vtls1 occurs 0,
       po(10),
       item like zvtls_sap-itemsap,
       end of t_flatfile_vtls1.
data : begin of t_update occurs 0,
       mandt like zvtls_sap-mandt,
       povtls like zvtls_sap-povtls,
       itemvtls like zvtls_sap-itemvtls,
       posap like zvtls_sap-posap,
       itemsap like zvtls_sap-itemsap,
       aedat like zvtls_sap-aedat,
       paedt like zvtls_sap-paedt,
       loekz like zvtls_sap-loekz,
       end of t_update.
data : begin of t_poheader occurs 0,
       po like zvtls_sap-posap,
       end of t_poheader.
data : begin of t_poitem occurs 0,
       po like zvtls_sap-posap,
       item like zvtls_sap-itemsap,
       end of t_poitem.
DATA : BEGIN OF T_MESSAGE OCCURS 0,
       MSGTY,
       MSGID(2),
       MSGNO(3),
       MSGTX(100),
       PO like zvtls_sap-povtls,
       item like zvtls_sap-itemvtls,
       END OF T_MESSAGE.
DATA : BEGIN OF t_bapi_poheader OCCURS 0.
        INCLUDE STRUCTURE bapimepoheader.
DATA : END OF t_bapi_poheader.
DATA : BEGIN OF t_bapi_poheaderx OCCURS 0.
        INCLUDE STRUCTURE bapimepoheaderx.
DATA : END OF t_bapi_poheaderx.
DATA : BEGIN OF t_bapi_poitem OCCURS 0.
        INCLUDE STRUCTURE bapimepoitem.
DATA : END OF t_bapi_poitem.
DATA : BEGIN OF t_bapi_poitemx OCCURS 0.
        INCLUDE STRUCTURE bapimepoitemx.
DATA : END OF t_bapi_poitemx.
DATA : BEGIN OF t_bapireturn OCCURS 0.
        INCLUDE STRUCTURE bapiret2.
DATA : END OF t_bapireturn.
*=====================================================================
                  V A R I A B L E S
*=====================================================================
DATA: w_success(6) TYPE n,
      w_bklas like t023-bklas,
      w_curryear(4),
      w_begda like sy-datum,
      w_endda like sy-datum,
      w_begyr(4),
      w_endyr(4),
      w_currmon(2),
      w_assetclass like ankt-anlkl,
      w_price type p,
      w_recordsap type i,
      w_povtls(10),
      w_count type i.
DATA: w_filepath TYPE rlgrap-filename,
       w_rc TYPE sy-subrc,
       w_sscrfields_ucomm1   TYPE sscrfields-ucomm,
       w_file1 TYPE string,
       w_file2 TYPE FILENAME-FILEINTERN.
*=====================================================================
                  C O N S T A N T S
*=====================================================================
CONSTANTS: c_x              TYPE c         VALUE 'X',
           c_hyp            TYPE c         VALUE '-',
           c_err            TYPE bdc_mart VALUE 'E'.
CONSTANTS: c_slash(1)            TYPE c VALUE '/',
            c_hash(1)             TYPE c VALUE '#',
            c_pipe                TYPE c VALUE '|',
            c_1                   TYPE i VALUE 1,
            c_zero                TYPE n VALUE '0',
            c_rg1(3)              TYPE c VALUE 'rg1',
            c_gr3(3)              TYPE c VALUE 'GR3',
            c_gr2(3)              TYPE c VALUE 'GR2',
            c_e(1)                TYPE c VALUE 'E',
            c_filepath(8)         TYPE c VALUE '/interf/',
            c_filetype(10)        TYPE c VALUE 'ASC'.
CONSTANTS : c_bapimepoheaderx   TYPE x030l-tabname
                               VALUE 'bapimepoheaderx',
           c_bapimepoitem      TYPE x030l-tabname
                               VALUE 'bapimepoitem',
           c_bapimepoaccount   TYPE x030l-tabname
                               VALUE 'bapimepoaccount',
           c_t_bapi_poheader(15)        TYPE c
                                        VALUE 't_bapi_poheader',
           c_t_bapi_poitem(13)          TYPE c
                                        VALUE 't_bapi_poitem',
           c_t_bapi_poitemx(14)         TYPE c
                                        VALUE 't_bapi_poitemx',
           c_t_bapi_poheaderx(16)       TYPE c
                                        VALUE 't_bapi_poheaderx'.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS:con_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
*======================================================================
                       SELECTION SCREEN
*======================================================================
SELECTION-SCREEN BEGIN OF BLOCK inputpath WITH FRAME TITLE text-001.
SELECTION-SCREEN : BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS : p_fore RADIOBUTTON GROUP rg1
                    USER-COMMAND pc,
             p_back RADIOBUTTON GROUP rg1 DEFAULT 'X'.
SELECTION-SCREEN : END OF BLOCK blk2.
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-003.
PARAMETERS : p_file1 LIKE rlgrap-filename OBLIGATORY MODIF ID gr2.
PARAMETERS : p_afile1 LIKE rlgrap-filename OBLIGATORY MODIF ID gr3.
SELECTION-SCREEN : END OF BLOCK blk1.
SELECTION-SCREEN END OF BLOCK inputpath.
*C-- Initialization Event
INITIALIZATION.
CLEAR w_filepath.
CONCATENATE c_filepath sy-sysid c_slash sy-mandt c_slash INTO
w_filepath.
CONDENSE w_filepath NO-GAPS.
p_file1 = text-008.
p_afile1 = text-009.
*======================================================================
                       SELECTION SCREEN EVENTS
*======================================================================
*C-- Selection Screen Output
AT SELECTION-SCREEN OUTPUT.
IF p_fore = c_x.
    w_sscrfields_ucomm1 = space.
ELSE.
    w_sscrfields_ucomm1 = c_rg1.
ENDIF.
LOOP AT SCREEN.
*C--Modify selection screen if presentation
*C--or application server radio button is chosen
    IF w_sscrfields_ucomm1 = space.
      IF screen-group1 = c_gr3.
        screen-active = c_zero.
      ENDIF.
    ELSE.
      IF screen-group1 = c_gr2.
        screen-active = c_zero.
      ENDIF.
    ENDIF.
    if screen-name = 'P_AFILE1'.
      screen-input = 0.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
*C-- Selection Screen VALUE-REQUEST FOR File path
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
IF p_fore EQ c_x.
    CALL FUNCTION 'F4_FILENAME'
      EXPORTING
        program_name = syst-cprog
        dynpro_number = syst-dynnr
      IMPORTING
        file_name     = p_file1.
ENDIF.
*C-- At Start of the Selection Process
START-OF-SELECTION.
IF p_fore EQ c_x.
    w_file1 = p_file1.
ELSE.
    w_file2 = p_afile1.
ENDIF.
IF p_fore EQ c_x. " Presentaion Server
*C--Validations for the input files
    PERFORM validate_pre_file USING p_file1.
*C-- Load the contents of the input file into the internal table
    PERFORM upload_file TABLES t_flatfile_vtls
                        USING w_file1
                        CHANGING w_rc.
    IF w_rc <> 0.
      MESSAGE s006 DISPLAY LIKE c_e.
    ENDIF.
ELSE. " Application Server
*C--Validations for the input files
    PERFORM validate_app_file USING w_file2.
*C-- Load the contents of the input file into the internal table
    PERFORM upload_file_app TABLES t_flatfile_vtls
                            USING w_file2
                            CHANGING w_rc.
ENDIF.
loop at t_flatfile_vtls.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = t_flatfile_vtls-ebeln
      IMPORTING
        output = t_flatfile_vtls1-po.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = t_flatfile_vtls-ebelp
      IMPORTING
        output = t_flatfile_vtls1-item.
    append t_flatfile_vtls1.
    clear t_flatfile_vtls1.
endloop.
perform get_podata.
loop at t_poheader.
    perform move_to_bapi.
    perform call_bapi.
endloop.
PERFORM STORE_MESSAGES TABLES T_MESSAGE.
*&      Form validate_pre_file
    Routine to validate presentation server file path.
     -->fp_name text
FORM validate_pre_file USING fp_name TYPE rlgrap-filename.
DATA : l_result,
         l_filename TYPE string.
l_filename = fp_name.
CLEAR l_result.
CALL METHOD cl_gui_frontend_services=>file_exist
    EXPORTING
      file                 = l_filename
    RECEIVING
      result               = l_result
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      wrong_parameter      = 3
      not_supported_by_gui = 4
      OTHERS               = 5.
IF sy-subrc <> 0.
    MESSAGE s007 DISPLAY LIKE c_e.
    LEAVE LIST-PROCESSING.
ELSEIF l_result IS INITIAL.
    MESSAGE s008 DISPLAY LIKE c_e.
    LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM.                    " validate_pre_file_hdr
*&      Form validate_app_file
      text - Checks if the path entered and filename is correct
FORM validate_app_file USING fp_file TYPE FILENAME-FILEINTERN.
data : l_fname(60).
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
      LOGICAL_FILENAME = FP_FILE
      OPERATING_SYSTEM = SY-OPSYS
    IMPORTING
      FILE_NAME        = L_FNAME
    EXCEPTIONS
      FILE_NOT_FOUND   = 1
      OTHERS           = 2.
IF SY-SUBRC = '0'.
    OPEN DATASET L_FNAME FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc NE 0.
      MESSAGE s007 DISPLAY LIKE c_e.
    ELSE.
      CLOSE DATASET l_fname.
    ENDIF.
ENDIF.
ENDFORM.                    " validate_app_file
*&      Form upload_file
      Routine to upload data from file to tables.
     -->P_fp_flatfile
     -->P_fp_file
     <--P_fp_rc
FORM upload_file TABLES   fp_flatfile
                  USING    fp_file TYPE string
                  CHANGING fp_rc TYPE sy-subrc.
IF fp_flatfile[] IS INITIAL.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                = fp_file
        filetype                = c_filetype
        has_field_separator     = c_x
      TABLES
        data_tab                = fp_flatfile
      EXCEPTIONS
        file_open_error         = 1
        file_read_error         = 2
        no_batch                = 3
        gui_refuse_filetransfer = 4
        invalid_type            = 5
        no_authority            = 6
        unknown_error           = 7
        bad_data_format         = 8
        header_not_allowed      = 9
        separator_not_allowed   = 10
        header_too_long         = 11
        unknown_dp_error        = 12
        access_denied           = 13
        dp_out_of_memory        = 14
        disk_full               = 15
        dp_timeout              = 16
        OTHERS                  = 17.
    MOVE sy-subrc TO fp_rc.
ENDIF.
ENDFORM. " upload_file
*&      Form upload_file_app
      text
     -->FP_FLATFILEtext
     -->FP_FILE    text
     -->FP_RC      text
FORM upload_file_app TABLES   fp_flatfile
                      USING    fp_file TYPE FILENAME-FILEINTERN
CHANGING fp_rc TYPE sy-subrc.
DATA: l_string TYPE tedata-data.
DATA: wa_data_file TYPE tp_flatfile_vtls,
        l_wllength TYPE i,
        FNAME(60).
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
      LOGICAL_FILENAME = FP_FILE
      OPERATING_SYSTEM = SY-OPSYS
    IMPORTING
      FILE_NAME        = FNAME
    EXCEPTIONS
      FILE_NOT_FOUND   = 1
      OTHERS           = 2.
IF SY-SUBRC = 0.
    OPEN DATASET FNAME FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc NE 0.
*C-- commented by Bikash
     MESSAGE s107(yaero_ps) DISPLAY LIKE c_e.
      message e008.
    ELSE.
      DO.
        CLEAR: l_string.
        READ DATASET FNAME INTO l_string LENGTH l_wllength.
        IF sy-subrc NE 0.
          EXIT.
        ELSE.
          SPLIT l_string AT con_tab INTO   wa_data_file-ebeln
                                           wa_data_file-ebelp.
          APPEND wa_data_file TO fp_flatfile.
        ENDIF.
      ENDDO.
      CLOSE DATASET FNAME.
    ENDIF.
ENDIF.
ENDFORM. " upload_file_app
*&      Form get_podata
      text
form get_podata.
select *
into table t_update
from zvtls_sap
for all entries in t_flatfile_vtls1
   where itemvtls = t_flatfile_vtls1-item
and povtls = t_flatfile_vtls1-po.
sort t_update by posap itemsap.
loop at t_update.
    at new posap.
      t_poheader-po = t_update-posap.
      append t_poheader.
      clear t_poheader.
    endat.
    t_poitem-po = t_update-posap.
    t_poitem-item = t_update-itemsap.
    append t_poitem.
    clear t_poitem.
    t_update-paedt = sy-datum.
    t_update-loekz = 'X'.
    modify t_update.
endloop.
modify zvtls_sap from table t_update.
endform.                    "get_podata
*&      Form move_to_bapi
      text
form move_to_bapi.
t_bapi_poheader-po_number = t_poheader-po.
CLEAR t_bapi_poheaderx.
PERFORM fill_check_structure USING c_bapimepoheaderx
                                     c_t_bapi_poheader
                                     c_t_bapi_poheaderx
                                     c_x.
refresh : t_bapi_poitem,t_bapi_poitemx.
loop at t_poitem where po = t_poheader-po.
    clear t_bapi_poitem.
    t_bapi_poitem-po_item = t_poitem-item.
    t_bapi_poitem-delete_ind = 'X'.
    CLEAR t_bapi_poitemx.
    PERFORM fill_check_structure USING c_bapimepoitem
                                       c_t_bapi_poitem
                                       c_t_bapi_poitemx
                                       c_x.
    t_bapi_poitemx-po_item = t_poitem-item.
    t_bapi_poitemx-po_itemx = c_x.
    APPEND t_bapi_poitem.
    APPEND t_bapi_poitemx.
    clear t_bapi_poitem.
    clear t_bapi_poitemx.
endloop.
endform.                    "move_to_bapi
*&      Form call_bapi
      This form Routine is used to commit the data records
FORM call_bapi .
DATA : l_msgty      TYPE c,
         l_msgid(2)   TYPE c,
         l_msgno(3)   TYPE c,
         l_msgtx(100) TYPE c,
         l_errflag    TYPE c.
CLEAR: t_bapireturn.
REFRESH: t_bapireturn.
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      PURCHASEORDER = T_POHEADER-PO
      POHEADER      = T_BAPI_POHEADER
      POHEADERX     = T_BAPI_POHEADERX
    TABLES
      RETURN        = T_BAPIRETURN
      POITEM        = T_BAPI_POITEM
      POITEMX       = T_BAPI_POITEMX.
READ TABLE t_bapireturn WITH KEY type = c_err TRANSPORTING NO FIELDS.
IF sy-subrc NE 0.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = c_x.
ENDIF.
*C-- Write messages
WRITE: / 'PO Number', t_poheader-po.
clear : t_update,w_povtls.
read table t_update with key posap = t_poheader-po.
w_povtls = t_update-povtls.
CLEAR l_errflag.
LOOP AT t_bapireturn.
    CLEAR: l_msgty, l_msgid, l_msgno, l_msgtx.
    l_msgty = t_bapireturn-type.
    l_msgid = t_bapireturn-id.
    l_msgno = t_bapireturn-number.
    l_msgtx = t_bapireturn-message.
    WRITE: / l_msgty, l_msgid, l_msgno, l_msgtx.
    if l_msgtx cs t_poheader-po.
      w_count = w_count + 1.
      loop at t_update.
        if sy-tabix = w_count.
          t_message-item = t_update-itemvtls.
        endif.
      endloop.
    endif.
    t_message-msgty = l_msgty.
    t_message-msgid = l_msgid.
    t_message-msgno = l_msgno.
    t_message-msgtx = l_msgtx.
    t_message-po = w_povtls.
    append t_message.
    clear t_message.
    IF l_msgty EQ c_err.
      l_errflag = c_x.
    ENDIF.    " l_msgty EQ 'E'
ENDLOOP.
ULINE.
IF l_errflag NE c_x.
    w_success = w_success + 1.
ENDIF.    " l_errflag NE C_X
endform.                    "call_bapi
*&      Form fill_check_structure
      This form Routine will check whether the specified structure
      exist/active
FORM fill_check_structure USING    fp_tabname TYPE any
                                    fp_orgtabname TYPE any
                                    fp_chktabname TYPE any
                                    fp_check TYPE c.
FIELD-SYMBOLS : <fs_chk>, <fs_org>.
DATA:    l_char1(61) TYPE c,
           l_char2(61) TYPE c.
DATA:    BEGIN OF tl_nametab OCCURS 60.
          INCLUDE STRUCTURE x031l.
DATA:    END OF tl_nametab.
REFRESH tl_nametab.
CALL FUNCTION 'RFC_GET_NAMETAB'
    EXPORTING
      tabname          = fp_tabname
    TABLES
      nametab          = tl_nametab
    EXCEPTIONS
      table_not_active = 1
      OTHERS           = 2.
IF sy-subrc <> 0.
    CLEAR tl_nametab.
ENDIF.
LOOP AT tl_nametab.
    CLEAR: l_char1, l_char2.
    CONCATENATE fp_chktabname c_hyp tl_nametab-fieldname INTO l_char1.
    ASSIGN (l_char1) TO <fs_chk>.
    CONCATENATE fp_orgtabname c_hyp tl_nametab-fieldname INTO l_char2.
    ASSIGN (l_char2) TO <fs_org>.
    IF <fs_org> IS NOT INITIAL.
      <fs_chk> = fp_check.
    ENDIF.
ENDLOOP.
ENDFORM.                    " fill_check_structure
*&      Form STORE_MESSAGES
      text
     -->FP_MESSAGEStext
FORM STORE_MESSAGES TABLES FP_MESSAGES STRUCTURE T_MESSAGE.
DATA: wl_output_data LIKE t_MESSAGE.
DATA: l_catstr TYPE string.
DATA: l_fieldvalue TYPE string.
DATA: l_index TYPE i VALUE 1.
DATA: L_FNAME(60).
FIELD-SYMBOLS <fs>.
CLEAR l_catstr.
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
      LOGICAL_FILENAME = '/USR/SAP/VTLS/POCHANGE/LOG'
      OPERATING_SYSTEM = SY-OPSYS
    IMPORTING
      FILE_NAME        = L_FNAME
    EXCEPTIONS
      FILE_NOT_FOUND   = 1
      OTHERS           = 2.
IF SY-SUBRC = '0'.
    IF fp_messages[] IS NOT INITIAL.
      OPEN DATASET L_FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc NE 0.
        LEAVE LIST-PROCESSING.
      ELSE.
        LOOP AT fp_messages INTO wl_output_data.
          DO.
           ASSIGN COMPONENT l_index OF STRUCTURE wl_output_data TO <fs>.
            IF sy-subrc <> 0.
              EXIT.
            ENDIF.
            MOVE <fs> TO l_fieldvalue.
            IF l_catstr IS NOT INITIAL.
              CONCATENATE l_catstr l_fieldvalue INTO l_catstr SEPARATED
              BY con_tab.
            ELSE.
              MOVE l_fieldvalue TO l_catstr.
            ENDIF.
            l_index = l_index + c_1.
            CLEAR l_fieldvalue.
            CLEAR <fs>.
          ENDDO.
          l_index = c_1.
          TRANSFER l_catstr TO L_FNAME .
          CLEAR wl_output_data.
          CLEAR l_catstr.
        ENDLOOP.
        CLOSE DATASET L_FNAME.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    "STORE_MESSAGES

Error #2032 when using SAP NetWeaver BI Connection

Hi,
I'm trying to use to new SAP NetWeaver BI Connection in Xcelsius SP2, but when I try to connect to a BEx Query, I receive error #2032.
I have a crossdomain.xml file in the Tomcat root of the BO-server, and the Adobe Global Security Settings are also filled in with all directories of my BO-server.
Has someone an idea why this error occurs, and how to solve it?
I'm working on Sap NetWeaver 7.0.1 SP5.
Lieven

We are using in total 6 different clients with Xcelsius 2008 Enterprise SP2. With two of them we can use SAP NetWeaver BI Connection and do not receive any error. The rest is showing the error message #2032.
There is one difference between the systems which are working and the ones which are not:
After selecting the query in the BI NetWeaver Connection there is an additional popup "Windows security" appearing.
--> The server sapbw100.xxxx at BicsRemote/Config1 requires a username and password.
Filling in the username and password the data from the query appear in the xcelsius.
With the clients which provide an error there is no such popoup.
If we create on an existing installation an .xlf file and open it on one which is not working, the Data Managers show the correct connection. As soon as we click on refreshing data, error #2032 appears.
System configuration clients:
Windows XP and Windows 7
Office 2007
SAP Business Explorer Patch 1001
Regarding the working clients:
One is working on XP the other on Windows 7
Both on Xcelsius 5.2.0.0
Installing the FixPatch for SP2 is also not helping to solve the problem.
All the inputs in this thread have been tested but without sucess. Till now we could not install note 1380059 since related notes are not yet released.

Plz help me: Error msg when installing SAP netweaver

Hello,
I am trying to install NetWeaver on my local system. I am not able to proceed further to install SAP NetWeaver 2004's.
When ever I am running SAPinst.exe file I am getting a prompt that says "Network input/output exception has occurred: Connection reset java.net.SocketException: Connection reset" and then it will ask for host and port number. I entered the local host name and port number as 21212. then I am getting a msg saying "Could not connect to host [HOST NAME] on port 21212. java.net.ConnectException: Connection refused: connect"
I installed all required JAVA components like Java Runtime Environment, Java SDK and JAVA JDK. I verified all environmental variables. I created a new connection with MS loopback adaptor. I disabled all other network cards available on my system. I entered required info in HOST file and SYSTEM file in %windows/system32/drivers/etc% folder.
After trying 2 - 3 times I tried to change the port number as mentioned in installation guide also ( using sapinst.exe SAPINST_DIALOG_PORT=<free_port_number_sapinst_gui_to_gui_server> GUISERVER_DIALOG_PORT=<free_port_number_gui_server_to_sapinst_gui> command in command line) . But no Luck.
Can any one help me, what else shall I do to proceed further. Thanks in advance.
Regards,
Farooq.

There is an option when starting the sapinst program to avoid starting up an installation GUI and instead wait for a connection from a remote installation console. I believe it is:
./sapinst -nogui (or something very similar, check the installation guide)
The server will now wait for a response from your terminal. Use the remote installation program and enter the port number of the server. If you just run the sapinst program without the nogui flag you may run into some issues. And make sure your versions match up. I have run into an issue before where I didn't realize I was using a verion of the remote installation program that didn't match up with sapinst server program.
Message was edited by:
Harrison Holland

SAP BPC using SAP Netweaver

Hi
Would please somebody give me a link on how to educate myself on SAP BPC using SAP Netweaver
Thank you very much in advance
Zubzero

Hi,
You are right. The link is like MS platform only. This is because there are not much differences between the 2 platforms. Few of the differences would be
1. BPC NW is integrated with NW BI
2. BPF is not available in BPC NW 7.0. However, it is back in 7.5
3. Increased dimensionality
3. Integration with BI accelerators
4. Improved dynamic templates
5. Books are not available
6. Transports are available.
There is a book BPC 330, which will give you a better understanding of BPC NW. This book is only available on classroom trainings.
Hope this helps.

Integration of SAP Cloud for Customer with third party / legacy / non-sap system using SAP Netweaver PI

Hello,
has anyone experience with the Integration of a 3rd Party System with SAP C4C using SAP Netweaver Process Integration?
Is this a process of days, weeks or months?
Any documentation on this?
I am thankful for every Input!
BR, Roman

Roman,
Please read through the integration guides available on the SAP service marketplace as they address this specific topic in great detail.
http://service.sap.com/cloud4customer
The time duration of the project depends on the business process complexity being resolved and the level of integration desired between the different enterprise solutions in the landscape.
Thank you.

How to Update crmd_customer_h TABLE Using CRMV_EVENT Through Funtion Module

Hi
How we can update customer_h table using the CRMV_EVENT Where i implemented logic below in the Funtion Module.
data:     lt_doc_flow          TYPE crmt_doc_flow_wrkt,
          lw_cust_h_com        TYPE crmt_customer_h_com,
          lw_input_field_names TYPE crmt_input_field_names,
          lt_input_field_names TYPE crmt_input_field_names_tab,
          lt_objects_to_save TYPE crmt_object_guid_tab,
          lw_guid TYPE CRMT_OBJECT_GUID.
DATA : lv_process_type TYPE crmt_process_type.
data: wa_doc_flow type CRMT_DOC_FLOW_WRK.
data: wa_customer_h type crmd_customer_h.
* Function module for retriving the Process type.
CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
    EXPORTING
      iv_orderadm_h_guid     = iv_header_guid
    IMPORTING
      ev_process_type        = lv_process_type
    EXCEPTIONS
      admin_header_not_found = 1
      OTHERS                 = 2.
if lv_process_type eq 'ZG01'.
CALL FUNCTION 'CRM_DOC_FLOW_READ_OB'
EXPORTING
   IV_HEADER_GUID                 = iv_header_guid
IMPORTING
   ET_DOC_FLOW_WRK                = lt_doc_flow.
read table lt_doc_flow with key objtype_a = 'BUS2000116' INTO wa_doc_flow. "gc_object_type-service.
            if sy-subrc eq 0.                    "set flag for service order
            lw_cust_h_com-ref_guid       = wa_doc_flow-objkey_a.
            lw_cust_h_com-ZZTRAIL_FLAG   = 'X'.
             lw_cust_h_com-mode           = 'A'.
            lw_cust_h_com-ref_handle     = '0000000001'.
            lw_guid = wa_doc_flow-objkey_a.
            INSERT lw_guid INTO TABLE lt_objects_to_save.
     endif.
              lw_input_field_names-fieldname = 'REF_GUID'.
            lw_input_field_names-fieldname = 'ZZTRAIL_FLAG'.
          lw_input_field_names-changeable = ' '.
           INSERT lw_input_field_names INTO TABLE lt_input_field_names.
Maintain Customer H
         CALL FUNCTION 'CRM_CUSTOMER_H_MAINTAIN_OW'
              EXPORTING
                is_customer_h_com    = lw_cust_h_com
              CHANGING
                ct_input_field_names = lt_input_field_names
              EXCEPTIONS
                header_change_error = 1
                header_create_error = 2
               error_occurred       = 3.
ENDIF.
*endif.
*Clearing local variables
clear: lv_process_type,
         lw_cust_h_com,
         lw_input_field_names.
*Free internal tables
free: lt_doc_flow,
        lt_input_field_names.

Hi Faisal
I think your not clear with what i am saying anyhow i will again explain you my requirement
As per my requirement
1)in the service order search report i need to add a field called "Has trail order with No Follow up" with values "Yes" & "Blank"
For above Field i added using the structure CRMST_QUERY_SRVO_BTIL and through configuration i am able to display the field in webui as per (Attachement Pic 1)
2)When i search with search criteria as "Has trail order with No Follow up" with "Yes"
Then in result list i need to show the service order those having follow up as trail orders(sales order) only.if for next document trail order having any follow up then those service orders dont want to show in result list.
For above requirement i implemented F.M using CRMV_EVENT & I configured for BUS2000115 And BEFORE_SAVE The Order
The FM Will get trigger when i save the service order and for that service order if create any follow up and try to save the trail order then This FM Will trigger and in this i am doing validations.
3)Add one AET Trail Flag field is added under CUSTOMER_H Table.
4)in the FM I am validating for if the trail order having the preceding document as service order then i need to make flag as "X" For that service order in customer_h
if suppose when i delete trail order from the service order then that flag must need to be "unset" from the CUSTOMER_H.
Why bcoz we are doing above process is do show records in result list based on Flag values
these flag checks are validating in the BADI Which we implemented for search logic.
Please refer below Login for my requirement:-
Proposal to have a custom “flag” field (background at table level,
     crmd_customer_h) linked to service order which gets flagged whenever at
     least one Trial order is created and saved from the Service Order.
The flag value should be cleared when all the trial orders created and
saved as follow up transactions are deleted from the system.
Similarly for Trial Orders will use the same custom “flag” field
     which gets activated when at least one follow up is created and saved from Trial Order.
The flag value should be cleared when all the follow up transactions from
the Trial Order are deleted from the system.
When the above search criteria “Has Trial order with no follow up”
     “is” “Yes” is applied then the logic derives all the service
     orders which satisfy additional search criteria applied in the search and
     for these Service orders checks if the custom flag field is checked to
     derive all Service orders which have Trial order. The custom flag values
     values are derived from crmd_customer_h table in CRM.
4 )Further for all the Trial Orders determined in Step 3
check if the Trial Order has a follow up by checking if the custom flag field
is checked. The custom flag values are derived from crmd_customer_h table in
CRM.
5) If step 4 is not met populate the preceding Service
Orders in the Result list

Code to update a table using sqlldr

Hi all,
can anybody give the code to update a table using sqlldr with an example
thank you

You want add the new line and modified the existing line (based on empno) from file e:\scripts\sql\emp2_ext.dat into table emp2 :
7782,CLARK,MANAGER,7839,09/06/81,80000,,10
8000,ORACLE,DATABASE,,11/02/07,99999,,20Then :
SQL> conn system/mypwd
Connected.
SQL>
SQL> create directory my_dir as 'e:\scripts\sql';
Directory created.
SQL>
SQL> grant read,write on directory my_dir to scott;
Grant succeeded.
SQL>
SQL> conn scott/mypwd
Connected.
SQL> create table emp2_ext
2 (EMPNO    NUMBER(4),
3   ENAME    VARCHAR2(10),
4   JOB      VARCHAR2(9),
5   MGR      NUMBER(4),
6   HIREDATE DATE,
7   SAL      NUMBER(7,2),
8   COMM     NUMBER(7,2),
9   DEPTNO   NUMBER(2)
10 )
11 ORGANIZATION EXTERNAL
12 ( TYPE ORACLE_LOADER
13    DEFAULT DIRECTORY my_dir
14    ACCESS PARAMETERS
15    ( records delimited by newline
16      badfile my_dir:'emp2_ext.bad'
17      logfile my_dir:'emp2_ext.log'
18      fields terminated by ','
19      missing field values are null
20      ( empno, ename, job, mgr, hiredate char date_format date mask "dd/mm/yy",
21        sal, comm, deptno
22      )
23    ) LOCATION ('emp2_ext.dat')
24 ) ;
Table created.
SQL>
SQL> select * from emp2_ext;
     EMPNO ENAME      JOB              MGR HIREDATE        SAL       COMM     DEPTNO
      7782 CLARK      MANAGER         7839 09/06/81      80000                    10
      8000 ORACLE     DATABASE             11/02/07      99999                    20
SQL> select * from emp2;
     EMPNO ENAME      JOB              MGR HIREDATE        SAL       COMM     DEPTNO
      7782 CLARK      MANAGER         7839 09/06/81      24500                    10
      7839 KING       PRESIDENT            17/11/81      50000                    10
      7934 MILLER     CLERK           7782 23/01/82      13000                    10
SQL> merge into emp2 a
2 using (select * from emp2_ext) b
3 on    (a.empno=b.empno)
4 when matched then update set a.ename=b.ename,
5                               a.job=b.job,
6                               a.mgr=b.mgr,
7                               a.hiredate=b.hiredate,
8                               a.sal=b.sal,
9                               a.comm=b.comm,
10                               a.deptno=b.deptno
11 when not matched then insert (a.empno, a.ename, a.job, a.mgr, a.hiredate, a.sal, a.comm, a.deptno)
12                        values (b.empno, b.ename, b.job, b.mgr, b.hiredate, b.sal, b.comm, b.deptno);
2 rows merged.
SQL>
SQL> select * from emp2;
     EMPNO ENAME      JOB              MGR HIREDATE        SAL       COMM     DEPTNO
      7782 CLARK      MANAGER         7839 09/06/81      80000                    10 --modified line
      7839 KING       PRESIDENT            17/11/81      50000                    10
      7934 MILLER     CLERK           7782 23/01/82      13000                    10
      8000 ORACLE     DATABASE             11/02/07      99999                    20 --added line
SQL> HTH,
Nicolas.
Well, Hans has already give good explanation with docs links...
Message was edited by:
N. Gasparotto

RE: Help on Development Consultant SAP Netweaver 2004 u0096 Enterprise Portal

Hi ,
I am planning to take Certification on Certification ID for Development Consultant SAP Netweaver 2004 Enterprise Portal {(Booking code): C_TEP15_04}. Can someone help me regarding the material availability.
Thanks
Venkat

Hello Venkat,
Exactly what kind of "material" are you looking for? The following site, https://www.sdn.sap.com/irj/sdn/developerareas/ep, has a Sneak Preview of SAP NetWeaver for downloading and eLearning material for you to go through to prepare yourself by going through the sample. Does that help?
Regards,
John Ta

How can we report on R/3 tables using SAP BO

How can we report on R/3 tables using SAP BO.
Thanks

Hi
you can use the CR Designer and build CR reports that access your R/3 system. Another option is to use the R/3 connector for the Data Federator which is available in the Innovation Center. Still this connector is not a product rather can be used on your own risk.
Regards,
Stratos
PS: Accessing directly the tables of the underlying database(e.g oracle) using universes and Web Intelligence is not recommended. You will not be able to decode all contents of the database tables you are accessing since in some cases R/3 encodes the data before storing them in the actual database tables.

Updating EKKO table using E1BPPAREX

Hi all,
My requirement is to update ekko table using E1BPPAREX segement. I have gone through so many posts regarding this.
In my case, PO number is not yet created. I am using BAPI_PO_CREATE1 for creating this . From PI side, if they pass the custom field value in the appropriate postion of VALUEPART field of E1BPPAREX, will it get updated to the ekko table automatically.
Regards,
Sajith

Hi Sajith,
you have to do is populate structure extensionin. You'll have to implement the fm DDIF_NAMETAB_GET to look for the right place (offset) in order to add the field on the structure extension in.
Example:
CALL FUNCTION 'DDIF_NAMETAB_GET'
    EXPORTING
      tabname   = c_ext_table   --> ''BAPI_TE_MEPOHEADER
    TABLES
      dfies_tab = lt_tab
    EXCEPTIONS
      not_found = 1
      OTHERS    = 2.
CLEAR l_offset.
LOOP AT lt_tab.
    CASE lt_tab-fieldname.
      WHEN c_yourfield.
        w_extin-valuepart1+l_offset = p_yourfield.
    ENDCASE.
    ADD lt_tab-leng TO l_offset.
ENDLOOP.
MOVE c_ext_table TO w_extin-structure.
APPEND w_extin TO p_i_extin.
Regards,
Carlos.

Help on Updating master table using SAP NetWeaver 2004s

Similar Messages

Maybe you are looking for