Help replacing D-Link DI-604

Hi everybody, I was looking into replacing my DI-604 with a newer more robust router. I only have fios Internet (no tv), and have had service for about 5 years. Can I just take the d-link out and put a new router in? Do I need to transfer any settings? How should I setup the new router (dynamic, static, pppoe). I am really just trying to cleanup some of my cable clutter... So thanks in advance!
Solved!
Go to Solution.

Defiantly PPPOE. Verizon didnt stop using PPPOE until after they stopped using the 604's. They didnt go to dhcp until they were using the 624's.
Simple. Purchase any router on the market. Connect it in place. Then follow the directions from your new router for setting up a PPPOE connection.
When it gets to the "username" and "password" for the PPPOE connection, you can use anything you want and dont have to even remember it. Verizon uses open authentication and doesnt require a username and password. The fields just have to have something in them. I personally use username for the username and password for the password, but it really doesnt matter what you put in. so long as something is in the field.
Your done. As far as basic connectivity is concerned. Now just need to set up your wireless (assuming you even use wireless)
Just remember, that verizon will not support the router you connect. (no big deal but it is something to keep in mind)
====================================================================================
Error exists between keyboard and chair.

Similar Messages

  • How to Replace Missing Links in CS5 InDesign

    I received a message that there were 13 missing links in my document. How do I replace those links? I can see the locations of the missing links in the links panel but I am not sure how to get them back in the document.

    Hi Richl,
    In the Links panel, highlight the images you want to relink (shift + click to select a range), and click on the leftmost icon at the bottom of the panel (looks like two chain links). You'll be presented with a menu to locate your missing links. If the links in the panel show a yellow rectangle next to them, the link simply needs to be updated, and to do that you click the update icon at the bottom of the links panel.
    Hope that helps.
    Cheers!
    -Mikey

  • Can you help with D-link and two airport express stations

    I currently run a Dlink 604 wireless and 1 Airport express for iTunes in my front room.
    A Express is also linked to the Dlink via a cable.
    All works fine - G4 dual running OS x 10.3.9
    I would like help with a couple of things please:-
    1. I have no current security on my Express, so anybody can use the net connection through it. How do I change this and still be able to use my tower and laptop?
    2. I have a second Express from work that I would like to use upstairs. It does work but requires me to swap the network to use it for iTunes and then I have no internet.
    It was formatted at work so has different ip numbers etc.
    Can I make this station join my exisitng network?
    As my lap top is wireless will I be able to surf through it upstairs?
    Thanks
    JohnO

    1. You need to open the Express's configuration in Airport Admin Utility and change the Wireless Security settings to WEP or, preferably, WPA or WPA2. When you attempt to connect to the network from your computers, you will be prompted for the password.
    2. The easiest thing to do is to hard reset the second Express and then use the Airport Setup Assistant to configure the second Express to join and extend the first Express's network. To do a hard reset, hold down the reset button until the LED starts flashing rapidly.
    BTW, I know it can work because I have the exact same setup (D-Link DI-604 and two Expresses in an extended wireless network).

  • Create or Replace DB link command.

    Hi all,
    Ora 11.2.0.1 Windows Server 2003
    Is there such a CREATE OR REPLACE DATABASE LINK command?
    We have lots of Developement databases and our central TNSNAMES.ORA is constantly changing. This is because some database are decommissioned, or newly added, or migrated to other servers.
    In this regard, I have a central monitoring database tool that creates dblink connecting to all the databases listed in the TNSNAMES.ORA.
    So when there a new db added I will create new dblink. If there is decommissioned I will drop the dblink. If there is migrated I will create or replace db link.
    How can I automate or manage this creation of database link but just by reading the TNSNAMES.ORA as input? Any bright ideas please.....
    Please help....
    Thanks a lot,
    Kinz

    Hi;
    you can create dblink than drop it and create it again.. There is no such a option like replace
    You can create scritp which can parse tnsnames.ora and create or drop or recreate dblink by pasring tnsnames.ora
    Regard
    Helios

  • Is there any programs to help replace my homeschool's ipad2 that was stolen from our classroom when i had a heartattack and left with the ems?

    Are there any programs to help replace my homeschool's ipad2 that was stolen when i had a heartattack recently  and had to leave with the ems.....?

    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
     Cheers, Tom

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • Network Magic v 5.5 I cannot access the online help from the links within NM

    When I try to access the online help from any link button in NM V5.5 including the main help > Help center > Network magic help, the browser will open and resolve address ,  Status bar will state done but I have a blank page.
    The URL in the address bar is
    http://go.purenetworks.com/redir/webhelp/nm/_cover.htm?pn=nm&a=5.5.9195.0&as=0&ad=2&bt=shp&b=Pure&dc=Pure0.LinksysRouterSetup&dt=OLN&k=1611759616&ct=cisco&ag=d9429c0fe2fd40b9&g=d04c74e28eb95300%2Cb2610a4f03b2f988&lcid=1033&ulcid=2057&am=99&it=upgrade
    I am running windows 7 Ultimate,  have tried 
    Firefox  3.6 and
    IE 8.0  -- I have put the Url into the trusted zone  and the web page will again show up as done and status bar shows trusted zone
    I have tried all this with my Firewall & AV (Kaspersky Internet Security 2010) both on and disabled
     NB  The "ask linskys link works" as does the "community forums"
    The Main help > Help center >Getting Started also works.
    ( I am running the WRT610N Router set up by Network Magic)
    Many Thanks

    I've seen this too use http://support.networkmagic.com
    Mikro the Owner of the Linksys BEFCMU10_V4-UG Modem & The BEFSR41v4 Router.

  • D-Link DI-604 and torrents

    I`ve encountered pretty wierd problem with D-Link DI-604 router.
    I have two PCs in my network, 1 slackware and 1 arch. Running azureus on slackware one gave me  no problems. But when I transfered my ~/.Azureus folder to arch computer (and of course changed router`s settings to forward azureus port to arch pc) it all started. When I run Azureus I usually get many connections. Router seems to simply block them.
    Even if I have enabled port forwarding via Advanced > Virtual Server (    192.168.0.110    Both 6827 / 6827 always) Status > Log still gives me
    Unrecognized attempt blocked from xxx.xxx.xxx.xxx:6881 to yyy.yyy.yyy.yyy UDP:6827 and so on.
    After running azureus for few minutes router slows down. I get massive lag when trying to do anything with it.

    Sorry for this thread, when I have posted it, opera started doing wierd stuff, so I thought I haven`t actually posted (even after refreshing page I couldn`t see my thread). So I had to post again.
    Mods, please remove this thread.
    And sorry again.

  • Router Security Settings D-Link DI-604

    I just got a D-Link DI-604 WIRED (not wireless) Router.
    I changed the password from the default. I disabled "UPNP" because I heard that was a good idea. I also disabled "Gaming Mode" because I don't do games. I have a G4 and a G3 hooked up to it, as well as my cable modem and a printer. Everything works.
    What I am trying to find out is what other settings I should consider changing from the default settings.
    There are a lot of choices, much too numerous to enumerate. I have sole control over both computers. Nobody has my permission to access my computer from the "outside". Of course, I surf the net and do normal things on it. All I want to do is make sure the "bad guys" don't get into my computer and do nasty things.
    Do any of you have some general advice or websites to recommend?
    G4 QuickSilver Dual 800MHz; 512 MB SDRAM   Mac OS X (10.3.9)   Pioneer DVR-111D; also two G3's

    The best thing to do is to block every port that you don't need. Both in and out. The you'll know which application needs which port. Try netbarrier.

  • D-Link DI-604 or Netgear RP614V2 ???

    hi.
    im going to buy a router and want end user comments on these 2.
    D-Link DI-604
    Netgear RP614V2
    they are both priced similar and is the only 2 i am interested in or else i would have to buy online and dont want that.
    also want to know if any of them have problems with the k7n2 onboard lan.
    Cheers
    Raven

    Hi Raven,
    I own the DI-604 from D-Link and I recommend it . It's rock stable, lifetime warranty and VERY easy to use. And don't know for the Netgear but, for me, the D-Link do is job.
    +1 for D-Link  
    My opinion.

  • I need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

    i need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

    Here is how to do it yourself.
    http://www.youtube.com/watch?v=2h53otOBTsI
    Here is how to send it to apple.
    http://www.apple.com/support/ipod/service/battery/
    Hope this helps!

  • Need help replacing a file in AE

    Ok, here is my problem, I made a project on another computer and then I transfered to my computer. I dragged all of the images and sounds but ONE very important image. I downloaded that same image from online and I need help replacing the corrupted old image with the new one. Here is a picture with more detail.
    I tried copy & pasting the layer properties and effects, but that didn't work. Any ideas?
    Thanks,
    Emal

    For instructions on swapping out a footage item's source file, "Replace layer source with reference to another footage item".

  • I upgraded my computer and need a link to download Acrobat Pro 9 MAC. I have my serial number but do not have my disc. Please help and send link. Thank you.

    I upgraded my computer and need a link to download Acrobat Pro 9 MAC. I have my serial number but do not have my disc. Please help and send link. Thank you. My MacPro computer is slowly dying and I need to get going with Acrobat Pro 9.

    Unfortunately, Adobe has quit support of earlier version. They have a version of AA9 Pro for Windows posted, but not for the MAC as I understand it. You can try Adobe Acrobat X (10) Pro, Reader, and Suite Direct Download Links | ProDesignTools, but again I can only find PC versions. Someone may drop by with a link or you might see if anyone locally has the CD (that you could get the install file from). You will still need to use your original S/N.

  • Replace the link "Create Bookmark Link" for "Download"

    When I execute a report from interactive columns in principal report ( published in the dashboard), I don't download for default, because this link not exist. Is it possible to replace the link “Create Bookmark Link” for “Download” (excel)?, Can I add additional link "Download" or "Export" to Excel?
    Thank.

    I don't understand what you want. Do you want a link that will download a Dashboard to Excel? Why do you want to replace the "Create Bookmark..." link? What's that got to do with your requirement?

  • Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace image links. The linked images are in Dropbox if that helps.

    I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

    Jasion,
    Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Maybe you are looking for

  • How to display data from a recordset based on data from another recordset

    How to display data from a recordset based on data from another recordset. What I would like to do is as follows: I have a fantasy hockey league website. For each team I have a team page (clubhouse) which is generated using PHP/MySQL. The one area I

  • Crystal Reports text in Arabic not exporting to PDF properly

    Dear All We use crystal reports XI developer edition along with Oracle 10G. The reports bring data from oracle which is in Arabic. The report works fine, displays the data in the viewer as desired, however when the user exports the report to PDF, the

  • The problem about TitleWindow's parent

    This problem is confused me. I have main.mxml like this <mx:Application xmlns:mx=" http://www.adobe.com/2006/mxml" layout="absolute" xmlns:v="views.*"> <v:documentsView title="Documents" /> </mx:Application> And from the documentsView component creat

  • Fuel condition

    hi all. i have a n issue in 3.1 system:  we have third party order.as per the customised process the fuel surchage condition is calculated on the bases of gross weight .as per our 3rd party order we not have shippment ,vendor directly delivery good t

  • User adding extra form boxes

    Hello, I'm not sure what the exact parlance is here but can anyone advise me on how about doing the following? Like on many Airline websites the user can click a button to 'add another passager' or whatever and a new form box/form boxes pop-up undern