Help Req: Refreshing Screen

Hi Folks,
Could anyone from amongst you let me know if we can refresh contents of screen after a stipulated time. e.g. after every 5 minutes i need to refresh a screen.
Please let me know if it is possible and if so could you also send me some demo code so that i can understand what is done in order to achieve it.
Regards,
Im

Hi,
Check this link:
http://www.sap-img.com/fu014.htm
This ABAP program will automatically update a report every 30 seconds while it is on the screen
at the same time keeping the GUI screen buttons active.
Reward if it helps.
Thanks,
Swati

Similar Messages

Help req for screen exit in migo

Hi guys,
I am using badi MB_MIGO_BADi to design an header screen i am facing following issues
1) It should be active for a particular plant. Now which badi/exit shld be use to export the value of plant
to badi to make it visible or invisible. IF its invisible does it also make it inactive??
2) to save the data from the screen into an z table. i put a break point in exit MB_CF001 but its not executing when
clicked on save while creating GRN against a PO.

Hi,
rearding the capturing of transit loss, I guess you can use the field 'Qty in Delivery note" to capture the Qty claimed to be delivered and capture the actual qty in the qty in Unit of entry field.
The difference would the transit lodd.
You can build reports on these.
Hope this helps.

Attach search help to standard screen

Hi Gurus,
I have to populate order quantity KWMENG in screen subscreen 4900 of VA01 ( Create Sales Order) from a ztable based on customer and date.
I have tried customer-exits ..There exists none satisfying this req. Could anyone pls tell how I can go about this now?
I believe , one way is to create a search help attaching to the screen-field . Can anyone help what is the process ? Has anyone done this earlier -attaching search help to standard screen
Rewards for helpful answers are sure!!
Regards,
Shweta

Hi Shweta,
Check this matter.
There are 3 ways:
1)In the PAI of the screen, add a module Process on value request.For example:
PROCESS AFTER INPUT.
MODULE USER_COMMAND_100.
PROCESS ON VALUE-REQUEST.
FIELD field_name MODULE value_request_for_field_name.
*field_name is the field for which you require search help.
In the Module value_request_for_field_name call this function 'F4IF_INT_TABLE_VALUE_REQUEST'.
2)The above procedure can be used if the field you have defined doesnt have an existing search help.If it already has search help and the field in the screen is taken from the dictionary,then in the attributes,u can check from from dictionary under the dictionary tab.
3)A manual search help can also be created in the se11 transaction by clicking on the search help radio button and giving the table and field name for which search help is required.
Hope this resolves your query.
Reward all the helpful answers.
Regards

Ipad 2 stuck in refresh screen and then powers down

I tried to update my apps and when I clicked on update all it went into a black refresh screen and then powers down after a while and then restarts itself into the refresh screen again. I can't seem to get it out of this cycle. Can anyone help me?

Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Windows Help and Support screen glitch? And keyboard malfunction! Help!

I have 3 problems. At the log in screen of my hp stream notebook 11, I wasn't able to complete my password due to a malfunction in one of the keyboard keys. I shut down the computer and came back later to try again. It worked but when I logged in, the Windows Help and Support screen kept repeatedly popping up even when x'd out. I would let it repeatedly pop up (like a glitch) and I would x it out and it would go away. Also as I was typing in anything (wordpad, internet, search), every other key letters and numbers were acting as shortcuts to different screens such as apps, the log in screen, control panel etc. then the Windows Help and Support screen would pop back up again as a glitch. Please help!

Hi @aaliyah22
Welcome to the HP Support Forums!
You mention three different issues, and I am happy to assist with this. Obviously we need to start with the keyboard. As it is just the one key you describe as a problem, I would try a cleaning. You could see if some compressed air helps first as some debris may have gotten into it. Also you can look at these two pages and see if anything helps.
Notebook Keyboard Troubleshooting (Windows 8)
Cleaning your Notebook PC
The other two problems sound a lot like something like a software or possibly a malware related issue, but you can start with trying a system restore to a point before the problem began and see if that helps.Using Microsoft System Restore (Windows 8)
Then take a look at these.
Resolving and Preventing Viruses on Your Computer (Windows 8)
About Spyware, Adware, and Browser Hijacking Software
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Help and Support screen popping up unbidden

Just recently, the HP "Windows Help and Support" screen keeps popping up unbidden, so I have to keep closing it. Very annoying. What can I do about this?

Thank you for the additional information.
Here is HP Help and Support for Vista. I suggest uninstalling it and reinstalling it to see if it solves your problem. If not, you may have to do a Systems Recovery.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Restricting values F4 help in selection screen-Urgent

Hi,
can anyone pls tell how can I ristrict the values for search help in any field in selection screen.
please tell me the way to hide some values in F4 help in selection screen so that user can not see those data for selection.
Regards

i think u can not hide the data.........
create own f4 help............restrict the data and then pass it the f4 internal table....
fro exp;;;;;
types : begin of ty_tab,
 post_code1 like adrc-post_code1,
 end of ty_tab.
data : it_tab type ty_tab occurs 0.
data : lt_field type table of dfies,
 lw_field type dfies.
select post_code1 from adrc into corresponding fields of table it_tab.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
 exporting
 retfield = 'POST_CODE1'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 dynprofield = 'LI_LIST1'
 value_org = 'S'
 tables
 value_tab = it_tab
 field_tab = lt_field
 exceptions
 parameter_error = 1
 no_values_found = 2
 others = 3.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Regards
Anbu

In IE, they have a refresh screen button, you do not..how do I refresh screen w/you?

In Internet Explorer, in the tools bar there is a refresh screen button, I can not find it in your tool bar in Mozilla Firefox. Please tell me how to refresh a screen in this web. Thanks !
If you go to IE you will see it in the tool bar under the address line.

And to keep the reload/Stop buttons from combining after moving them elsewhere, either place them as Stop|Reload or put a flexible space in between if you prefer them as Reload|Stop.

HT1349 When I click on a help subject the screen that appears is frequently blank.

When I click on a help subject the screen that appears is frequently blank.

I also have this problem. The Number two shows up in the App Store screen. I go to purchases and there are no apps that require updating. The number two in the App Store still remains on my screen. Has anybody found the solution yet? I called Apple, Only to be told that I should back up to iTunes on the computer, and then restore my iPad from the computer to eliminate the number two on the App Store screen. I'm hesitating to do that. Suggestions?

Hi its urgent...help on selection screen parameters

Hi all,
I need help on selection screen parameters.
requirement is that,
i am having input fields for material, plant ,start date and end date and a check box and an input field for getting the txt file.
when i select the checkbox, it should ignore the mandatory fileds in the selection screen.
and when i get the file input, it should take the input data material, plant, start date and end date from the flat file and populate the corresponding input fields in selection screen.
How to do this..
thanks in advance.

Hi ..
While declare the Matnr, Plant etc dont use the OBLIGATORY addition.
instead of the based on the value of check box validate them .
AT SELECTION-SCREEN.
IF c_box = ' '.
<< validate for mandatory fields>>
endif.
REWARD IF HELPFUL.

Search help in selection screens for interactive report

A search help can only be assigned to DB table.
So my doubt is can it also be used for seletion screens created for an interactive report?
If yes what is the procedure.. Please give me one example at least...
waiting for your valuable suggestions.....
Thanks,
regards,
Chinmay

Hi Chinmay,
I suppose your requirement is to give search help to selection screen elements.
Here is the code.
REPORT ZSHAIL_F4HELP .
parameters: name(10) type c .
TYPES: BEGIN OF VALUES,
 CARRID TYPE SPFLI-CARRID,
 CONNID TYPE SPFLI-CONNID,
 END OF VALUES.
dATA: PROGNAME LIKE SY-REPID,
 DYNNUM LIKE SY-DYNNR,
 DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
 FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
 VALUES_TAB TYPE TABLE OF VALUES.
at selection-screen on value-request for name.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
 tabname = 'DEMOF4HELP'
 fieldname = 'CARRIER1'
SEARCHHELP = ' '
SHLPPARAM = ' '
 DYNPPROG = PROGNAME
 DYNPNR = DYNNUM
 DYNPROFIELD = 'CARRIER'
STEPL = 0
VALUE = ' '
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
SUPPRESS_RECORDLIST = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
SELECTION_SCREEN = ' '
IMPORTING
USER_RESET =
TABLES
RETURN_TAB =
EXCEPTIONS
 FIELD_NOT_FOUND = 1
 NO_HELP_FOR_FIELD = 2
 INCONSISTENT_HELP = 3
 NO_VALUES_FOUND = 4
 OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
I hope your query is solved.
If so,please award points.
Regards,
Sylendra.

How to Add F4 Help To a Screen Field In a Module Pool Program

Hi Friends,
1. How to Add F4 Help To a Screen Field In a Module Pool Program?
2. How to select a single cell in ALV report output for interactive reporting ?
Kindly give code example.
regards,
Pradeep

Hi,
Try using the fm 'F4IF_INT_TABLE_VALUE_REQUEST'.
Refer the link below for selecting single cell.
alv
Reward points if useful.
Regards
Rose

How to add a search help on a screen field from screen painter

Hi,
I would like to add an existing Search Help on a screen field in Screen painter.
Of course it's possible to just click on th screen field and in the property box, I just have to set the name of teh search help.
The problem is that I need the screen field to be grey and user musn't be able to change the field value if he doens't use the search help.
I'm not allowed to modify the existing search help or to built it on my own from source code, I must use the existing one.
Do you have an idea on how to do so?
Regards,
Morgan

Dropdown Box:
In the screen painter for that field goto properties -> Dropdown ->select listbox.
Option 1:
Instead let that field be in change mode and if user enters any wrong entry which is not there in the table give a error messgae.
CHAIN.
 FIELD addr1_data-country.
 MODULE modify_screenfields1.
ENDCHAIN.
MODULE modify_screenfields1 INPUT.
CASE sy-ucomm.
 WHEN 'ENTER' OR 'EXECUTE'.
 IF NOT addr1_data-country IS INITIAL.
 SELECT SINGLE landx FROM t005t INTO lws_landx WHERE
 land1 = addr1_data-country
 AND spras = 'EN'.
 IF sy-subrc <> 0.
 MESSAGE e000(zo_spa) WITH text-022. " Invalid Country code
 ELSE.
 t005t-landx = lws_landx.
 ENDIF.
 ELSE.
 CLEAR: t005t-landx.
 ENDIF.
 ENDCASE.
ENDMODULE. " modify_screenfields1 INPUT
Option 2: Other than if u want the way u like, let that field be greyed out. don't attach the search help.
In the PROCESS ON VALUE-REQUEST.
FIELD addr1_data-region MODULE region_pov.
MODULE region_pov INPUT.
Using the F4IF_INT_TABLE_VALUE_REQUEST table value request show the search help.
also make that field input enabled.
ENDMODULE. " region_pov INPUT
I think this will solve ur problem.
Regards,
Prakash.
Message was edited by: Prakash Ramu

Attaching search help to a screen field

Hi all,
I've created a search help (zhlp) and want to attach it to the screen field in the selection screen of my report.
SELECT-OPTIONS KSCHL FOR VAKE-KSCHL
MEMORY ID VKS.
I've attached zhlp to the screen by defining it on the element list of the screen 1000.
And the original db table T685 already got a search help H_T685, when I run my report and press F4 in the field, it calls the default search help H_T685 but not mine.
Could anyone help me? Thanks.

here is the syntax for assiging search help to selection screen field.
SELECT-OPTIONS KSCHL FOR VAKE-KSCHL MATCHCODE OBJECT ZHLP.
Regards
Raja

Help Req: Refreshing Screen

Similar Messages

Maybe you are looking for