Help requested on 10g Clusterware & OCFS2 -- Thanks.

I post it on the Clusterware board but no response there yet. So, posting it here too with the hope that somebody will respond and help.
I am trying to install Clusterware when giving OCFS2 directory/file as OCR files -- it's telling that's not Shared Storage!! I have Red Hat 4.6 x86_64 and OCFS2 1.2.8-2. Both the nodes are running along with OCFS2 -- if I create a file from one node that's visible/modifiable from other.
The mount command giving the following (on both nodes):
/dev/sdb1 on /ocfs2 type ocfs2 (rw,_netdev,datavolume,nointr,heartbeat=local)
I have /ocfs2/ocr1 & /ocfs2/ocr1 -- as OCR locations -- also tested with
dd if=/dev/zero of=/ocfs2/ocr1 & /ocfs2/ocr2 bs=1024 count=128 and
chown root:dba & oracle:dba /ocfs2/ocr1 & /ocfs2/ocr2
I also found that (from either node),
mounted.ocfs2 -f gives:
Device FS Nodes
/dev/sdb1 ocfs2 lnxwin1,lnxwin2
And mounted.ocfs2 -d gives:
Device FS UUID Label
/dev/sdb1 ocfs2 a big string (same on both nodes) oracle
So -- what am I missing that Clusterware OUI complaining it's not a Shared Storage? I am totally baffled!
Is there any kind minded Clusterware/OCFS2 expert? Please HELP.
Thanks.

Interestingly, if I try to install the Clusterware on a single node (by running runInstaller from either node) OUI accepts the same file as Shared Storage without complaining anything but as soon as I add the 2nd node node (in OUI screen), it fails. What may be the reason? Am I missing any configuration? Thanks.

Similar Messages

  • PROCESS ON HELP-REQUEST

    Hi
    wat is importance of POH. what If there is no PROCESS ON HELP-REQUEST ?
    Thanks and regards
    - Puneet Sharma.

    To display data element supplement documentation, you must code the following screen flow logic in the POH event:
    PROCESS ON HELP-REQUEST.
      FIELD <f> [MODULE <mod>] WITH <num>.
    After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
    If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
    You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.

  • URL to download Oracle 10g clusterware softare

    Hi,
    Can anyone give me the URL to download Oracle 10g Clusterware software, I found only Oracle 11g Clusterware in download section of Oracle site.
    Thanks

    Below mentioned link will help
    where's RAC 10g download page?

  • Process on Help request and Process on value request events examples

    HI All,
               Can anybody please give me some examples of Process on Help request and Process on value request events.
    Thanks in advance

    HI,
    Check programs
    <b>demo_selection_screen_f1</b>.
    <b>demo_selection_screen_f4.</b>
    Regards,
    Sesh

  • Need huge help on my router WRT120 N thanks

    Hi, new here, really needed some help regarding my Linksys router WRT 120 N, which i bought not too long ago. Long story short, had it for ps3 online and it worked terrific, tried to get it too connect with the 360 and a disaster. 
    My idea was too uninstall anything Linksys has and then reinstall the same router. I figured that way i could go back to the previous settings before i tinkered with them for the 360, and just start fresh with a new SSID and have an easier time that way. So i tried, a number of times, but everytime i do, it says the program/router is already installed, leaving me with little to no idea what to do to get it back to workign with the ps3, let alone ever trying for the 360.
    By the way, as you may tell, im pretty much tech illiterate, didnt grow up around it and now that i have it, it confuses me quite alot. I feel most comfortable just figuring out how to uninstall it, that is my preference, but if some one knows how i can fix it without doing that and getting my 360 and ps3 online with it,  would also appreciate that. I migth not understand lingo, but im very driven to get this over with, i have been pulling my hair out for  hours trying with my very limited knowledge.
    Again, any help and all help is so so very appreciated, thank you so much in advance.
    If you need any other information, please dont hesistate to ask me.

    Before using the setup program again, you will need to reset your router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • Root.sh hangs when installing  instance 10g clusterware (10.2.0.1)

    Hi,
    root.sh scripts is hanging when installs 10g clusterware(10.2.0.1).
    $./orainstRoot.sh
    Changing permissions of /u01/app/oracle/oraInventory to 770.
    Changing groupname of /u01/app/oracle/oraInventory to oinstall.
    The execution of the script is complete
    $./root.sh
    WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
    WARNING: directory '/u01/crs/oracle/product' is not owned by root
    WARNING: directory '/u01/crs/oracle' is not owned by root
    WARNING: directory '/u01/crs' is not owned by root
    WARNING: directory '/u01' is not owned by root
    Checking to see if Oracle CRS stack is already configured
    /etc/oracle does not exist. Creating it now.
    Setting the permissions on OCR backup directory
    Setting up NS directories
    Oracle Cluster Registry configuration upgraded successfully
    WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
    WARNING: directory '/u01/crs/oracle/product' is not owned by root
    WARNING: directory '/u01/crs/oracle' is not owned by root
    WARNING: directory '/u01/crs' is not owned by root
    WARNING: directory '/u01' is not owned by root
    clscfg: EXISTING configuration version 3 detected.
    clscfg: version 3 is 10G Release 2.
    assigning default hostname rac1 for node 1.
    assigning default hostname rac2 for node 2.
    Successfully accumulated necessary OCR keys.
    Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
    node <nodenumber>: <nodename> <private interconnect name> <hostname>
    node 1: rac1 rac1-priv rac1
    node 2: rac2 rac2-priv rac2
    clscfg: Arguments check out successfully.
    NO KEYS WERE WRITTEN. Supply -force parameter to override.
    -force is destructive and will destroy any previous cluster
    configuration.
    Oracle Cluster Registry for cluster has already been initialized
    Startup will be queued to init within 90 seconds.
    Hangs
    Thanks,

    There is a note available in Metalink.. 416100.1 Have a look at it..
    This is symptom where there is a discrepency in the hostnames in CRS installation.

  • Hello i can  not  i use my account on the applewill   store , i hope that yu help  me with a lot of thanks and wait reply to this massege

    hello i can not i use my account  on the apple store  , i hope  that yu will  help me  with  a  lot  of thanks and wait  reply to this message

    Go through the below link.
    http://support.apple.com/kb/ts2446
    If the above link doesn't helps then contact APple support and they will help you Enable your Apple Id from their End : http://support.apple.com/kb/he57

  • My iphone 4 was on ios 5.0.1, then a few days ago I upgraded it to ios 6.1.4, then the apple logo won't stop flashing. Can anyone help to resolve my problem? Thanks in advance

    My iphone 4 was on ios 5.0.1, then a few days ago I upgraded it to ios 6.1.4, then the apple logo won't stop flashing. Can anyone help to resolve my problem? Thanks in advance

    I'm trying to restore my iphone by using the recovery mode. But it always seems to run out of time, any idea why is that? Thank you again

  • HT201441 Hello , my name bonilla astrid buy an iphone from a vendor and I forgot the key put it 10 times and I did not realize I had icloud account of the seller and is no longer in the country nose to do would help me please await your response thank you

    Hello , my name bonilla astrid buy an iphone  5 from a seller and I forgot the key put it 10 times and I did not realize I had icloud account of the seller and is no longer in the country nose to do would help me please await your response thank you very much .

    Sorry, without knowing the Apple ID/Password that was originally used to activate this phone, then there is no way to re-activate it, as you've found out.
    Apple can't/won't help you. Your choice is to get this info, or you simply won't be able to re-activate this phone.
    If you ex won't give it to you, then consult a lawyer.

  • Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!

    Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!
    Problem description:
    My mac has been very slow lately. Any suggestions?
    EtreCheck version: 2.1.2 (105)
    Report generated December 14, 2014 at 8:15:29 PM PST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2009) (Verified)
      MacBook Pro - model: MacBookPro5,5
      1 2.26 GHz Intel Core 2 Duo CPU: 2-core
      2 GB RAM Upgradeable
      BANK 0/DIMM0
      1 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      1 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 9400M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:54:52
    Disk Information: ℹ️
      Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      MacHD (disk0s2) / : 159.05 GB (49.15 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-ST DVDRW  GS23N 
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Startup Items: ℹ️
      DVD3EnablerService: Path: /Library/StartupItems/DVD3EnablerService
      Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
      [failed] com.apple.AirPlayUIAgent.plist [Details]
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.coreservices.appleid.authentication.plist [Details]
      [failed] com.apple.icloud.fmfd.plist [Details]
      [failed] com.apple.secd.plist [Details]
      [failed] com.apple.security.cloudkeychainproxy.plist [Details]
      [failed] com.apple.telephonyutilities.callservicesd.plist [Details]
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.ctkd.plist [Details]
      [failed] com.apple.icloud.findmydeviced.plist [Details]
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist [Details]
      [failed] com.apple.softwareupdate_download_service.plist [Details]
      [failed] com.apple.wdhelper.plist [Details]
      [failed] com.apple.xpc.smd.plist [Details]
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.oracle.java.Java-Updater.plist [Support]
      [not loaded] com.teamviewer.teamviewer.plist [Support]
      [not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
    Launch Daemons: ℹ️
      [running] com.adobe.ARM.[...].plist [Support]
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [invalid?] com.oracle.java.Helper-Tool.plist [Support]
      [not loaded] com.teamviewer.teamviewer_service.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.nds.pcshow.plist [Support]
      [invalid?] com.nds.pcshow.uninstall.plist [Support]
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
    Time Machine: ℹ️
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      MacHD: Disk size: 159.05 GB Disk used: 109.90 GB
      Destinations:
      KINGSTON [Local]
      Total size: 30.88 GB
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Too small
      Backup size 30.88 GB < (Disk used 109.90 GB X 3)
    Top Processes by CPU: ℹ️
          6% WindowServer
          0% AppleSpell
          0% SystemUIServer
          0% powerd
          0% Google Chrome
    Top Processes by Memory: ℹ️
      131 MB softwareupdated
      112 MB Google Chrome
      41 MB Finder
      34 MB Google Chrome Helper
      32 MB WindowServer
    Virtual Memory Information: ℹ️
      51 MB Free RAM
      587 MB Active RAM
      551 MB Inactive RAM
      350 MB Wired RAM
      10.96 GB Page-ins
      865 MB Page-outs
    Diagnostics Information: ℹ️
      Dec 14, 2014, 07:37:58 PM Install Adobe Flash Player_2014-12-14-193758_[redacted].crash
      Dec 14, 2014, 07:21:27 PM Self test - passed

    Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
    The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
    The better your description of the problem, the better the chance of a solution.
    For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

  • HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

    I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
    "The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

    Try Perian.
    http://perian.org/

  • Help!! ALL of a sudden I cannot open ANY of my pictures in iPhoto. I have clicked the iPhoto icon on my dock, as I always have done, but no pictures appear. Can anybody out there help me???? Thank you!

    Help!! ALL of a sudden I cannot open ANY of my pictures in iPhoto. I have clicked the iPhoto icon on my dock, as I always have done, but no pictures appear. Can anybody out there help me???? Thank you!

    What does appear?

  • Hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

    hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

    hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

  • I accidently deleted my url box at the top of safari. I believe I did this with the command key. Can anyone help me get it back? Thank you in advance!

    I accidently deleted my url box at the top of safari. I believe I did this with the command key. Can anyone help me get it back? Thank you in advance!

    Right click (cntl-click) on the top of the bar and select "customize toolbar".  Drag the default set back in.
    Regards,
    Captfred

  • AT selection-screen on ON HELP-REQUEST

    Hi
    What is normally done in the Selection Screen event :
    AT selection-screen on ON HELP-REQUEST.
    Normally pressing F1 helps gives Documentation present in Data Element assoicated with the field. Exactly in what cases would we be needing to use this event.

    Hi,
    That event is used for search.
    at selection-screen on value-request for p_file.
      call function 'F4_FILENAME'
           exporting
                field_name = 'p_file'
           importing
                file_name  = p_file.
    If you code in the same manner in the selection screen you will able to search and select a file from your work station, so that it will be uploaded in SAP.
    I hope this will help you, if not plzzz be back.
    CHEERS
    If your problem is solved award points and close the thread.

Maybe you are looking for