Help-Ripping My Cds for the I Pod

Somebody help me this is driving me chuffing nuts. Im currently ripping all my cds-and a great deal are DJ Mixes. When the window opens up to show its formatting I wait until all the tunes are formatted. I then C&P the artist and place it along the name of the track on the 'Name' section and then place the name of the DJ on the artist section, followed by putting the mix in the right genre on the bottom then clicking on the 'Options' to click the 'part of a gapless album' so there are no gaps in the mixes.
Fine so far. But when all the work I have done is transferred into my library some of the tracks go back to the format they were first presented to me which is not what I want-I have to back over some (not all of the tracks) repeating what I have just done!
Help!

Welcome to the Apple community.
Connect it to iTunes, select the device in the device list in iTunes, select the audiobook from the various sync options and sync.

Similar Messages

When transferring music library and apps to my new I Pad I think I clicked Export Library instead of synching. Now my music library is virtually empty - mostly CDs downloaded, a few apps for the I Pad and apps for the I pod too. Can I move these back?

When transferring music library and apps to my new I Pad I think I clicked Export Library instead of synching. Now my music library is virtually empty - mostly CDs downloaded, a few apps for the I Pad and apps for the I pod touch too. Can I move these back?

weird very weird. today i did this again today after already being unsuccessful earlier. exactly the same thing as i have done before, exactly. didn't try to import. didn't say damaged library, copied everything in including date. have tried it about 10 times no luck. today it just worked.
how weird is that?
oh well JG - maybe you mixed a magic potion for me?
anyway, thank you for all the help.
to anyone else reading this all i can say is keep trying, you never know. follow the above advice. you may feel exasperated and think you have done it already, but keep trying.
cheers
P

I want to import songs frm my Ipod to my itunes library. Songs were ripped from CDs to the ipod not purchased from itunes store...how can this be done?

I want to import songs frm my Ipod to my itunes library. Songs were ripped from CDs to the ipod not purchased from itunes store...how can this be done?

You would have to let itunes rip the songs from the cd's, or you would have to copy the music from the computer which ripped cd's.
iTunes does not support transferring music from the ipod unless it was purchased from the store.

I just want know if is possible use the iphone's charge battery for the i-pod touch. Thank you!

i just want know if is possible use the iphone's charge battery for the i-pod touch. Thank you!

Using an iPhone wall charger for the iPod is fine. You can also use an iPhone cable for the iPod.
The term " iphone's charge battery" is not really clear.

Need Help with instr/Regexp for the query

Hi Oracle Folks
I am using Oracle
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
I have some student responses and the valid values are +/-/O(alphabet)/P and spaces at the end of the sting only not in the middle.
As per my requirement the record number 2 3,4 should be listed from the query but I am getting only one (record 3).
Can we use REG_EXP
Please help.
Thanks in advance.
Rajesh
with x as (
SELECT '+-+-POPPPPPP   ' STUDENT_RESPONSE, 1 record_number FROM DUAL union all
SELECT '+--AOPPPPPP++' STUDENT_RESPONSE, 2 record_number FROM DUAL union all
SELECT '+-+- OPPPPPP--' STUDENT_RESPONSE, 3 record_number FROM DUAL union all
SELECT '+-+-9OPPPPPP   ' STUDENT_RESPONSE, 4 record_number FROM DUAL )
(SELECT RECORD_NUMBER,
TRIM(STUDENT_RESPONSE) FROM X
WHERE
((INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'-') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'+') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'O') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'P') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),' ') !=0)
)

Hi, Rajesh,
Rb2000rb65 wrote:
Hi Oracle Folks
I am using Oracle
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsThanks for posting this (and the WITH clause for the sample data). That's very helpful.
I have some student responses and the valid values are +/-/O(alphabet)/P and spaces at the end of the sting only not in the middle.Are you combining the responses to several qeustions in one VARCHAR2 column? It might be better to have a separate row for each question.
As per my requirement the record number 2 3,4 should be listed from the query but I am getting only one (record 3). What exactly is your requirement? Are you trying to find the rows where student_response contains any of the forbidden characters, or where it contains a space anywhere but at the end of the string?
Can we use REG_EXPYes, but it's easy enough, and probably more efficient, to not use regular expressions in this case:
Here's one way:
SELECT     record_number
,     student_response
FROM     x
WHERE     TRANSLATE ( UPPER ( RTRIM (student_response, ' '))
            , 'X+-OP'
            , 'X'
            )     IS NOT NULL
;That is, once you remove trailing spaces and all occurrences of '+', '-', 'O' or 'P', then only the forbidden characters are left, and you want to select the row if there are any of those.
If you really, really want to use a regular expression:
SELECT     record_number
,     student_response
FROM     x
WHERE     REGEXP_LIKE ( RTRIM (student_response)
              , '[^-+OP]'          -- or '[^+OP-]', but not '[^+-OP]'. Discuss amongst yourselves
              , 'i'
;but, I repeat, this will probably be slower than the first solution, using TRANSLATE.
Edited by: Frank Kulash on Oct 17, 2011 1:05 PM
Edited by: Frank Kulash on Oct 17, 2011 1:41 PM
The following is slightly simpler than TRANSLATE:
SELECT     record_number
,     student_response
FROM     x
WHERE     RTRIM ( UPPER ( RTRIM (student_response, ' '))
           , '+-OP'
           )          IS NOT NULL
;

Help with transparent background for the pop up menu!

Hello everyone,
I am working on a Web site which has a pop up menu created in Dreamweaver 8. The pop up is over a picture and I'm thinking about to make its background transparent. I'm not really a programmer to be able to do it manually but I'm familiar with JS. Would anybody be able to help me with this? I truly appreciate it.
I could find the code but don't know where to place it! The JS file is about 700 lines!!! I'm so confused...Below is the source file for the JS that you could download...
http://www.arxcustomhomes.com/mm_menu.js
Thanks so much.
Mojan

Sure.
http://www.arxcustomhomes.com
Thanks a lot.
Mojan

Help with port forwarding for the WRT54G

I need assistance please!
I am having issues trying to setup port forwarding for a ftp. I already have set this up for a SQL Server port and it works remotely. When I setup another rule for ftp using port range 20-21 it does not work.
I have confirmed that I have saved my settings, have the correct IP address, etc. I have firmware version 4.21.1 and not sure how to troubleshoot this. Any help would be great.
Thanks,
John

Yes you do need to have the port already forwarded for port 20~21 with both TCP/IP and UDP enabled unless you know for sure your ftp only uses just one of them. That is why I asked what port your SGL was set to. Follow the link that other guy posted and open port 20 and 21 (I only use 21 with no problems) and make sure it is directed to the IP of the ftp host. Also that PC needs to have the FTP enabled in windows. To do that go to your control panel > add/remove software > and on the left side go to add/remove windows components. Then check the box for the ftp and add it. It should ask for your windows CD do have it handy when you add the ftp component to your PC.
Richard Aichner (Ikester)

Help with pulling records for the last 24 hours

Post Author: kbrinton
CA Forum: Formula
Hi,
I don't know what is wrong with me but I can not figure out how to get Crystal to pull records for the last 24 hours. I have a date field I can key off of but I can not figure out the formula or correct syntax to put in the Selection formula. Any help would be great!! Thanks

Post Author: SKodidine
CA Forum: Formula
No need to create any formula. In your record selection criteria type:
{table.date} in dateadd("h",-24,currentdatetime) to currentdatetime
If you just want the prior 24hrs and do not care about the time then replace 'currentdatetime' with 'currentdate'.
(currentdatetime - 24) will give you 24 days before and not 24 hours.

Need help quickly as possible for the error 0xc004c008

hi,i have lenovo ideapad z580 laptop with windows 8 pre-installed still within the warranty period but after doing one key recovery for the second time an activation error appear as following "the product key is already being used on another pc,try
a different key or buy new one" with the following error code "0xc004c008" and i have contacted lenovo they gave me new product key but also the problem still exist and also one of my friends have a look at the laptop and told me that to go
to lenovo and have a new windows 8 installed on the laptop but i am really confused and don't know what should i do? . So,please i am really need help quickly and thanks in advance

Well, there's enough time, so if you start the ball rolling with your code then people will help - but you have to do the work. We won't do your homework...

I need help on changing font for the subtitles in quicktime player

Hi
I am wondering if there is a way to change the font size for the Quicktime Player?
I have no idea how I can do it, and this is greatly bothering me.
If someone knows the step, may you please write the step by step process of how to change the font size?
I will be really happy to know this
Thnx.
(P.s. - I also like pictures )

They can only be changed by using an authoring app like QuickTime Player 7 Pro.

Need help with installing Windows for the bar exam

I need to retake the bar exam in Feb 2011 and I've decided to switch to typing. I am trying to figure out what Windows I need (the software says XP is fine but is that even available anymore)- so can someone walk me through this process? I've partioned my hard drive with the default 5GB but should it be more?
I'm looking at buying Windows- is XP okay or should I shell out for 7-i.e. is one more compatible with Macs?
And then finally, in the installation instructions they mention that I need my Mac OS disc for the process- is that the snow leopard disc or something else? My discs are in storage right now so should I wait until I get them before starting this process or can I get replacements if I accidentally threw them out in moving?
Sorry for all the questions, but well, I'm racing to get everything done and I want to make sure I don't crash my system halfway through the exam!

You don't need Boot Camp, but even XP will have a lot of stuff to update from after the install, and that takes temp space. Just as your Mac shows 5-10GB there is add'l hidden space used.
Apple's 'requirements' has gotten others in trouble and I was pretty sure it was more like 10GB. Plus a lot of XP discs are now SP3.
XP out of the box but connected to the net is just waiting for malware, average is 15 minutes to be infected. 7 is better and just in case you need it again.
System Builder can come in 32 or 64-bit but XP is 32-bit only.
VirtualBox by Oracle is a free VM.
1GB for one program actually seems like a lot, or is that RAM requirement?

Input help takes longer times for the planning var in Portal

Hi Gurus,
I had a planning report with planning function copy historic demand and some planning filters forecast analysis ID.When i'm executing the report in portal by providing the direct values to forecast analysis ID,but when i press F4 button the screen keep on refreshing.
Regards,
rambabu

Dear Rambabu
Have you maintained the selection criteria for the infoobject as Posted values or from master data, it will depend on this how fast the selection retrieves
Regards
Gajesh

When I plug my i phone 4 into i tunes on the same computer that is used for the i pod touch it changes the e mail over to the i pod touch and i cant figure out how to get it back on the i phone account. how do i fix this?

Hi, i need help. When i plug into i tunes with my i phone 4 it changes the e mail account over to my daughters i pod touch account and i can't figure out how to separate the 2. when i click on store, it show up as my account but if i try to update an app or purchase anything it shows on the phone as her email and i need her password to do what i what. it also puts her apps on my phone. any advice would be appreciated. thanks

If you are being prompted for her Apple ID password when updating apps it means that there are one or more apps on your phone that were purchased with her ID. (Apps and their updates are permanently tied to the ID used to purchase them regardless of the settings on your phone.) It's possible that you are inadvertently syncing her apps to your phone. . The only way to stop this is to delete these apps from your phone. You may want to check which apps are checked on the Apps tab of your iTunes sync settings before syncing next time to be sure her apps aren't selected.
To change the Apple ID used for purchasing, go to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in using the ID you want to use.

Help with downloading Ringtones for the 8830

Went to Verizon, couldn't download my ringtones.
Went to the User's Manual, told me to click on media, all ring tones, press menu button, then download tunes... problem is, there is no download tunes menu item.
Any help somebody could give me would be greatly appreciated.
Doug
Chandler, Arizona
www.TheDirtDealers.com

Verizon is noted for blocking a number of standard features in the handheld OS. I verified the steps you gave as correct on my BB, but I have a different carrier. Suspect you may need to take it up with Verizon, or, if this is a company issued device, they may have requested Verizon to block it.
You can also download tunes by browsing to a website that offers sound clips. When you click on the link it should offer to save it as a ringtone for you. Try www.freeringtones.com, but any site that offers short .mp3 or .mid clips should work.
posted by DigitalFrog
WARNING: May contain traces of nuts.

Are there 4 or 5 CDs for the CS suite?

I have CS version 1. It came with 5 CDs: 2 for install and 3 for Extras. However, the 3 Extras are Disk 1, Disk 2, & a duplicate of Disk 2.
Should there be a Disk 3 for Extras, or should there actually be only 2 CDs and somehow I got a redundant Disk 2?

My version of CS Premium has six discs - Two Installers, Two Resources and Extras, One Adobe PageMaker Plug-in Pack (whatever that is) and One Video Workshop Training CD.

Help-Ripping My Cds for the I Pod

Similar Messages

Maybe you are looking for