Help setting up internet on minions phone

Ok got my son a minions phone lexibook gsm20series how do I set up Internet browser

I've had a look online and I'm not even convinced it has internet capability, but anyway, try texting the word "active" to 2020 and if that doesn't work try manually entering the O2 data settings from this link http://www.geeksquad.co.uk/articles/o2-apn-settings

Similar Messages

  • Help setting up internet on a I-Mac I purchase from an auction

    I purchase a Imac from an auction.It was used in a school envoirment, logon gives me student,teacher and tech. I can log in under teacher but I can not get permission to access the TC/ICP ? to install and setup my DSL 2wire connection.??? If I purchase the OSX will it reformat like a MS-XP product will do

    1dent,
    Welcome to the Apple Discussions.
    Your iMac is most likely a G3 so this forum has plenty of sympathetic ears. However, you will find additional help here.
    Short answer, yes, you can reformat the drive and pave over everything.
    You will need an install disk. You can buy universal CDs or model specific CDs. The iMac CDs will be cheaper if you only have iMacs. Otherwise, a universal install CD will cover all models.
    May I suggest partitioning the drive to give a little room to backup system files unless you only have a 4 gig drive and need all the room you can spare on your primary drive. Plus, with fragmented files, reformatting will give you a clean start.
    As for getting on the internet, iMacs were advertised and sold as internet ready. The first iMac I touched was delivered to a client while I was visiting his home. We were truely connected to the web in under 15 minutes. Your install CD will give you a clean install back to that state. BTW, check with the school, they may have a spare CD in some closet or drawer.
    Ji˜m

  • Need help setting up internet on iMac PowerPC G3

    I am trying to setup this old iMac PowerPC G3 500 Mhz computer. When the computer was last used I had earthlink and dial up. Now I have Cox cable internet. There are 2 PC's and 1 MacBook in the house working now using a linksys wireless router. I'm trying to get my old iMac PowerPC G3 500 Mhz computer setup to use cable internet (via ethernet) with Cox Communication. I have Netscape 4.73. I have a linksys modem model no. BEFCMU10
    ver. 3. I have hooked up an ethernet cable from the modem to computer. I entered all the new info in the control panel in "internet" . In TCP/IP is where I'm confused! Am I missing something?

    Hi, pete -
    The settings in the TCP/IP control panel are few; set:
        Connect via:    -to-    Ethernet
        Configure    -to-    Using DHCP Server
    That's usually all that is necessary.
    Other considerations -
    I could not tell from the info available at Linksys's site whether that model modem has an auto-switching ethernet port. If it does not, you will need to use a Crossover type ethernet cable between the Mac and the modem, If it does, you can use either a Crossover or a Patch type cable.
    Be sure the modem is on and warmed up a bit before starting up the Mac. Many Macs will disable the ethernet bus during startup if a live device is not detected as being connected at that time.

  • I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

    I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
    I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
    Can you please help me with this?
    Thanks Matthew.

    Hello,
    The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • I've got 2 phones an iphone 3gs and i updated it to an ios 6 also an android phone since updating my iphone 3gs to ios 6 it wont let me add vpn configuration or set up internet tethering/ personal hotspot or portable wi-fi

    I've got 2 phones an iphone 3gs i updated it to an ios 6 also an android phone since updating my iphone 3gs to ios 6 it wont let me connect or add vpn configuration or set up internet tethering/ portable hotspot or portable wi-fi but i have no problems connecting or adding my android phone to tethering or portable hotspot

    http://support.apple.com/kb/HT4517
    http://support.apple.com/kb/TS2756
    if those two links don't help then contact your phone carrier.

  • I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

    I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

    Two different things
    If you forgot the password
    If you forgot your Apple ID password - Apple Support
    If the email ID you want to use is in use by someone else - then you may need a new one
    The iCloud ID's are usually unique and may be of help if you set one up

  • HT4864 Help set up on android phone

    Help set up icloud email on android phone

    I have tried this recommended email setup.  This set up worked on my phone until a few weeks ago.  However it continues to work on my wife’s phone.  Roadrunner now recommends the following set up:  pop-server.triad.rr.com 110 and mobile-smtp.roadrunner.com 587.  This setup up also fails to work.
    Neither, roadrunner nor Time Warner have offered a solution that works.
    Thanks for your response.
    Jerry

  • Need Help Setting Up a new Network ..

    Hello 
    Newbie question, I am attempting to setup a small home network, where I want three WLANS
    Main
    Guests
    Kids
    I want to set up different policies for these three networks. 
    I want the Kids to be able to access the Media server and other network devices, but limit the internet access. I want guest network to not be able to see the other two networks. 
    I have an ISA550 Firewall a 2504 Wireless Controller and a SG300-28P Switch. 
    I did manage to setup the Vlans on the ISA550 - Default as 192.168.75.x , Guest as 192.168.25.x and Kids as 192.168.35.x 
    From here on - I would need some help setting it up the right way, Please help. 
    Thanks

    rmunoz274 wrote:
    I had to call Verizon and spend an hour on the phone, my Versalink is about 3 years old and I never updated it. There is a software update which makes it a little more mac friendly. Cables still run through it on the Ethernet port. I was able to turn the wireless feature off on the Versalink (to stop my neighbors and kids from bypassing the APE and just factory reset the APE and set it up with a shared IP adrs instead of bridging it. Also made sure I turned off the guest network on the APE. Once it was set up I clicked on Airport in the Airport Utility then wireless Clinets, jotted down the client I wanted to restrict access to (Kid's Laptop) then go back to Airport screen, last option on right Access then MAC Adrs Access Control change to "Timed Access", then click the + on the bottom of the window, type the MAC adrs you want to restrict and set time limits, when complete click done..... Only took me a week and a half to figure it out...... Good luck, if that doesn't help let me know, but I'm no expert...
    thanks!!
    i think i have the most recent 327w update, because it now shows my modem screen in a red color and it is broken into 3 sections across the screen.
    as far as the AEBS is concerned, you did not use it in bridge mode at all?
    i thought you had to connect 1 cable from it to the 327w? I have about 5 items i will be connecting, so i will probably run any wired from the AESB, but not sure yet?
    thanks, and yaeh last time my network took me a bit of time as well!!
    what kind of encryption are you running?
    thanks

  • Need help setting up TV equiptment

    I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}

    blondeinneed wrote:
    I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}
    Teresa,
    I think the best way for someone to volunteer to help you would be for them to send you a Private Message (PM) here on the forums. You should see a small envelope in the upper right corner of the screen, when it changes color you will know you have a PM to view.
    I would be happy to help, but since I am in North Texas I don't think that is a viable option Sorry....
    Justin
    FiOS TV, Internet, and phone user
    QIP7232, QIP7100-P2, IMG 1.9A
    Keller, TX 76248

  • Set up Internet E-mail

    I'm trying to Set up Internet Email address but it's impossible. I received message:
    "Bad Gateway
    The gateway revived an invalid response from the server when attempting to fulfill your request."
    I have T-mobile but my phone originally was from At&T. It's unlocked. When it's start going to Set up that account it's starting at&t browser not blackberry browser. I assume that might be a problem.
    I don't know how to fix it.
    Help please.....

    Try logging in to your TMobile BIS account from the PC.
    http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I can't get on the internet with my phone?

    Ok so I can't use my phones own internet, like the 3G? It says I have a connection, but the internet on my phone won't work. I also tried Wifi, and it says it is connected to wifi and the internet STILL won't work. I think I know the problem, I have a system update to install, but i can't install it cause i can't connect to the internet! Can someone help please? I am stuck I can still make calls and send texts.

    UPDATING iOS
    Over the air updating of iOS needs iOS 5 or later so unless you have iOS 5 or later you will not see updating in setting
    The following link explains how to update http://support.apple.com/kb/HT4972
    This link explains how to update using wireless http://support.apple.com/kb/HT4623
    This explains how to transfer purchases to your computer http://support.apple.com/kb/ht1848

  • Help setting up my new IPod Touch on iTunes on windows 7 64bit

    Hello there,
    I need help setting up my new IPod Touch to my Itunes 10 application on a PC running windows 7 64bit. I have watched the tutorial on how to do it but what the tutorial says it is supposed to do is not what is happenning for me:
    1. In the tutorial it tells you to connect your ipod to your computer, then, (if it is for the first time) when the ipod appears and is selected, a window will come up allowing you to name your ipod, and begin selecting the options you wish to use.
    I did as instructed but quickly came against some technical issues.
    My issues:
    1-1: When I selected the new iPod Touch for the dirst time I got an error message.
    A) This was quickly fixed once I calld up apple support on the phone (turns out an IE browser setting was blocking it.)
    1-2: With that fixed I selected my iPod Touch again but instead of the window indicated by the tutorial, I instead got an iPod registration form window.
    1-3: I filled out the form and pressed the submit button (thinking everything was fine), then a new window came up that looks like this:
    Free Find My iPhone
    Free Find My iPad
    Free Find My iPod touch
    Set up Find My iPhone for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPad or iPod touch.Set up Find My iPad for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPod touch.Set up Find My iPod touch for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPad. _Learn More_
    _Set up Find My iPhone_
    _Not Now_ _Set up Find My iPad_
    _Set up Find My iPod touch_
    Find My iPhone (or iPad or iPod touch) enables you to locate your iPad with Wi-Fi or iPod touch only when it is on and connected to a registered Wi-Fi network. Find My iPhone is not available in all countries. "
    The first three lines and the first paragraph are indented as if there should be some type of graphic there, but it is missing. The underlined words indicate that they are supposed to be links, but they don't go anywhere, they are broken!
    Now wheenever I connect my iPod Touch and select it the above window comes up and nomatter what I try it will not move or change.
    Please help!
    MSRankin

    Try setting up the device in a new user account. or visit register.apple.com and verify your device is registered

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Need help setting up and configuring rsync

    Hello
    I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
    Here is what I would like to:
    - I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
    - The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
    - this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
    - hopefully this makes sense??
    Any help is greatly appreciated!
    Thanks

    It's a lofty but unrealistic goal.  Rsync does not run automatically.  There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
    I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
    If you must do this with rsync then I suggest a Google search for rsync tutorials.

  • I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer

    I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer activates by phone. What is the solution to continue to use my program that I have had working on this computer for a long time?

    You do not state which version... if CS2 read next
    CS2 (and earlier) Activation Server replacement software
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    When you install the special version of PPro2 on a Win7 or Win8 computer, you MAY need to right click the program icon and select WinXP compatibility from the option popup... AND Vista problems https://forums.adobe.com/thread/416347
    If not CS2, read next
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

Maybe you are looking for