Help tracking ghost email
It happen at least four time since Mountain Lion.
mail is open, but I am not in it.
then I hear the noise of Mail beeing sent
but at a very high pace, 3, 4 mail per second, and it does not stop
I usually cut network access after a few second,
I look into Sent Message, but there is nothing new
nothing in console either
It feel like some program is sending email without asking me.
How could I look more closelly into this.
I would like to block outgoing email unless I authorise it (should I buy littlesnith or something like that ?
them I would like to look at the paquet beeing send.
Any idea on how to do this or any other suggesstion you might have will be very appreciated.
Franco
Hi Franco,
I don't have a direct answer, however since I experienced a similar thing, I have some possible explanations:
Here is what I have: almost eveytime I insert a headphone to the computer or remove the headphone, I get a similar response from my Mac (i.e., very rapid mail receive and sent noises). I really doubt that this is a ghost mail or anything wrong with the system. I also tried to check the sent folder (nothing there), made sure that I am not sending weird messages randomly. I highly think that this is a bug about sound driver (?) since this happened almost always related to headphone switches in my case: is it the same for you?
Here is what I think might be the case: the moment I insert/remove headphones, for some reason my Mac replays the sound for all mails sent/received from the last time I did this. For once I also thought this might be related to Notes.app syncing, however ruled that out later on.
Similar Messages
-
hi...
i am developing an application through which i sendm mails.I have to track the emails sent out.
ie. 1. i need the count of mails sent(which is easy)
2. Count of undelivered mails?
3. Whether the email is opened or not?'
To track whether the emails is read or not....i have read at many sites regarding placing a 1 pixel image in the body of the mail.But i din get any solution ...Please help me if anybody has a solution.
Thank u
verveHi Kittu,
Normally that it what we expect from the system point of view
i don't think there should be a program or other functionality to check whether you have entered a correct mail id or not.
Regards,
Vamshi. -
Help tracking the condition of a form
Hi All
Thank you for viewing my post.
I am a relavtive beginner with Livecycle but have got a reasonable grasp on scripting with javascript etc.
Here's my problem.
I have created an internal order acknowledgement form.
This form is filled in by our internal sales dept, and in the form they indicate the reviews required to process the order e.g. engineering review, operations review, sales review or a combination of them.
They do this via checkboes.
Currently when they submit the form, I have background script that saves the form based on specific information in the form i.e. order number + initals of user + customer name + todays date.pdf on our server (using the trusted application method). After this operation a Mailto command is specified to mail the form to the departments that are ticked.
Each department that is selected for review then has its own comments area and submit button on the form. Once the department has reviewed the order and done whatever work is required for it they simply submit the form which in turn gets saved as order number + initals of user + customer name + todays date + departmentname review completed.pdf, and emails the form back to the order processor.
OK this all works great!!
But it now means I have up to 4 forms being saved for each order, which is OK but now I have been asked to make it more tracable for metrics.
i.e. if a department looks at the folder where the forms are stored can they view quickly the forms requiring their attention.
So I have a few options but not sure how to achieve any of them.
1. - When each file is saved it then deletes the last? - risky because if it is open at hte time on anybodys computer this process wont happen, and I am not sure if it is possible to delete files with javascript through adobe reader?
2. - export certain fields on each submit (just the order number, customer name and current status of submit buttons) to a single external file which I can then interrogate with excel or something similar). This sounds good but I have no idea how.
3. use a mysql database to collect the data from these fields but again not sure what is involved with this / or if its possible.
ANY HELP IS MUCH APPRECIATED.
THANK YOU IN ADVANCE.Hi Paul
Thankyou for your response.
Is it possible to move a file from one directory to another using
JavaScript under adobe control?
Thankyou for the invite to your seminar I will attend.
Thanks
Graham
pguerett <[email protected]>
19/03/2010 15:44
Please respond to
[email protected]
To
Graham Spaull <[email protected]>
cc
Subject
Help tracking the condition of a form
Understand your issue and typically this is handled by a Process
Management or workflow product. LiveCycle has an option for this but it
might be overkill for what you are trying to do. Anyways regarding your
points:
1. You cannot delete anything from th efile system form inside of Acrobat
(because of security)
2. You cannot export specific fields, you can export all of the data then
manipulate it using some 3rd party program. Think in terms of submitting
it to a srver then having a server program extract the bits you needd and
do the update.
3. You can have the forms communicate with a DB but that requires the need
for another LiveCycle module called Reader Extensions to allow Reader
users to access the DB, If you are using Acrobat then that is not a
requirement. I am giving a presentation on this topic next Tues (23rd of
Mar) at 12 EST. If you are interested you can register here:
http://acrobatusers.com/events/2220/tech-talk-database-connected-forms
Paul -
I upgraded to version 5.0 and now I constantly have 5 ghost emails!
I upgraded to version 5.0 and now I constantly have 5 ghost emails! I have looked in every possible area to find these emails, but have had no luck! Any suggestions?
Hey Tomtangle,
Welcome to the forums!
From your main message list scroll to the top and highlight todays date, once this is done hit the menu key and choose "Mark Prior Open"
Let me know if that works out for you.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Hello,
I want to create an email that will be sent out by my boss in my outlook i want to fill out the recipients, message body.
I then want to send the email to my boss for review if he agrees to the changes, wording, he wants to press send and the email be sent by him to all the recipients .
can this be done, if so how?Hi Beach,
Ghost email can be created in MS-Outlook but you have to get the authentication of
exchange server mail account for this.
To read about granting access
forghost email, read the given link:
http://www.ehow.com/how_6633628_create-ghost-email-behalf-outlook.html
After getting the authentication, the other important part which is
editing in the Boss’s email. To edit the email or for forwarding it on behalf on someone, you have to create a new email.
In new email, type the name of the person in the Form filed on whose
behalf you are sending email and send the email.
Note: Improve community discussions by marking the answers helpful whenever necessary.
Thanks
Clark Kent -
When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.
Me too. I try to verify and i get the same message.
I've created 3 alternate e-mail addresses and tried creating new accounts.
Same Result!
This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error??? -
How to track the emails not delivered in SAP
Hi Guys
i am using SOST to track the emails which are not delivered
but
SOST is not tracking all the un-delivered emails
It is tracking only those mails as error whose mail IDS are not registered in SCOT
when i regester some un-existing mail ID in scot and send a mail to that via sap
SOST is showing its status as sent/transmitted/delivered
My requirement is to track akk the undelivered mails that are sent via SAP
Please advice
Edited by: kittu reddy on Feb 18, 2008 8:19 AMHi Kittu,
Normally that it what we expect from the system point of view
i don't think there should be a program or other functionality to check whether you have entered a correct mail id or not.
Regards,
Vamshi. -
Using Mail 3.6 in Leopard 10.5.8
I know this is not a big deal, but it's annoying me and I'm sure there must be a simple fix.
There are two ghost emails, one in the Inbox and one in Sent - both have names, dates and subjects but no content. No matter how many times you delete them, drag to trash etc etc, they just won't go away! Why?! How to get rid of them??
Thanks in advance.Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot. -
Help please , iv emailed bt but been ignored .....
help please , iv emailed bt but been ignored , iv phone but the operator had know idea what he was talking about .
hope this is in the write forum .
last year i applied to be on bt basic , the cheap one for if your on income support etc , it was excepted as far as i know but i have realized i was never put on it or if i was it wasn't for very long .
the only thing i can think is i was not aloud to have o2 broad band on the basic tariff , anyone know if thats the case ?
in the info about "basic " which is about £5 a month it says you can have broad band but this may mean only bt broadband ,
any ideas ?Hi Toastie,
Nope cant see anything saying that you need to take BT Broadband, shouldn't matter who you are with.
Could you drop me in an email please with your BT account and telephone number along with a link back to this thread.
Just send to the email address in my profile.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Ghost emails in iPhone Exchange client
For some reason occasionally when I delete an email while working on the iPhone they get deleted from the Exchange server but not from the phone itself. Subsequently when I try to delete them from the phone I get a message stating that they can not be moved which leaves me with "ghost" emails on the phone that do not appear in Outlook. Does anyone have any ideas on how to get rid of these pesky buggers? They are starting to pile up...
Thanks - yea my phone is on the latest release of the OS but I have no idea what the version or patch level of the Exchange servers are since they are managed by the IT group. They keep everything pretty up to date though so I'd assume that they are on the latest release.
It appears as if the only solution here is to completely delete the email account and then create it anew and let it download from the server thereby deleting these ghost emails. Seems like there ought to be a better solution though... Apple??? -
CRM Email Tracking - read emails
Hi,
Can someone tell me how / whether you can track which emails have been read when you send an email campaign?
I understand how the /## can be used to track click throughs on links placed in the email but how can you track whether someone reads something and doesn't click through.
ThanksHello,
I have the same problem that I have to track the open rate of a mail and not the open rate of a link.
It's known as described in the wikipedia article to achieve this with a transparent picture which you have to implement in the mailform.
I'm able to track the open rate for static mails but not for generated mail campaigns. The dynamically creation of the mig and urlguid doesn't work for pictures.
Instead of adding a link for tracking I'm adding a picture for tracking
But the MIG and URLGUID isn't created for them if I start the campaign.
Therefore I added the MIG and URLGUID manually.
The result is that now I can see in the marketing contact summary who downloaded the picture and reverse that means that he has opened the mail.
The problem is: How can I create the tracking Id's dynamically for campaigns?
Best regards,
Simon -
hi,
we have a problem with SAP BCM because in CDT one of our emails hanged up and it is shown that it's waiting 2000 hours for reaction. off course i searched in CTM many times and i cannot find this task (to be handled again)
do you know maybe what can i change in SQL database to remove this ghost email from our CDT? or maybe where else i can find something to do that?
regards
PaulOther possibility that worked for me most times, switch from personal to shared in the CTM, usually the mail is shown there and can be answered or deleted.
Otherwise I also don´t see any other chance except for the database. -
Need Help; Must accept email and create item in custom list
Hello Forum,
We have a Sharepoint 2010 site that has been using Microsoft's ticketing system for years. What I need to confirm is if there is a way to email the sharepoint list and have it create a ticket (parsing the from address, subject and body then creating a ticket
from that and sending a confirmation email reply to the user).
I understand there may be some coding needed, but don't know where to start without having to start over and lose our years of lists / data. Can someone please help provide information or at the very least a starting point for me?
Thanks.I coded something similar very recently. This community project helped me a lot; http://www.codeproject.com/Articles/32899/Reading-an-Outlook-MSG-File-in-C
I called
out to this code from an ItemAdded Event Receiver on the library to parse the email metadata.
It's also possible to email enable Libraries and receive items emailed straight to the library. There's a special event receiver available for that which helps you parse email metadata. (But I couldn't receive email directly from my project so I didn't use
this approach though I daresay it's simpler); http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spemaileventreceiver.aspx
w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP -
i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
<Phone Number Edited by Host>You aren't addressing anyone from Apple here. This is a user forum.
You might want to call a neaby Apple store to see if they have a free class you could attend. -
Trying to clear unread emails shown as a badge next to mail icon, have done network reset and now a complete factory reset and checked server. Any other thoughts on clearing these ghost emails?? Also can we get our old keyboard back that shows lower case and upper case?
Understood, the difference with iTunes being that Apple doesn't (currently) require you to enter any account info on the device until you try to purchase something from their store. Initial setup is just a connection to the iTunes software and you're good to go.
While I understand that RIM wishes the account to be defined, they also need to be aware that doing so during the initial setup without proving an option to do it later, while failing to provide any means to change it afterwards (short of a device wipe) doesn't always suit the the situation. Hopefully they'll be reviewing the forums to gather feedback that they can incorporate into future software updates.
BESX 5.0.4, SQL 2008, Exchange 2010 SP2 RU4a
Maybe you are looking for
-
MacBook Air and problems with Time Capsule in 5GHz Radio Mode
We have our Time Capsule configured to 802.11n only (5 GHz). We've done this to work more efficiently in a particularly noisy wireless area. The problem is that the MacBook Air can't maintain a connection to it and when it loses the connection, the w
-
Apple G4 iBook Confusion?*!
Hey everyone! I need a bit of help. Have a used g4 iBook which came with disks, upon starting with disk, I choose lang. and then it says can't install on this. These are original disks, what am I doing wrong? Please help I need my apple fix! lol
-
I'm working in a small project and part of it is when a user registers, there details are checked for errors (eg null value). If there is an error it should appear on screen if there is not it should forward to a confirmation page from the register p
-
iPad messenger will not send or receive from other than iPad users. iPhone will. Why and can it b fixed
-
Text problems with Illustrator CS6
Hello. We are having problems with text in Illustrator CS6. 1. When we copy / paste text within illustrator all color information is lost. 2. When we save documents in Illustrator CS6 then re-open text with color attributes changes to different rando