Help with a smart object

While I'm in ps cs5 and have converted a layer to a smart object, when I click/double click on the layer or the icon it will not open into camera raw. I have tried this with jpgs, tiffs and psd files, I have no other problems with raw, bridge of photoshop. I have also downloaded the latest patch from Adobe, any help would be appreciated/

Um, the function of Smart Objects isn't to invoke Camera Raw, in general. 
You only get that behavior if you open a raw conversion as a Smart Object, in which case the Camera Raw plug-in embeds the raw file in the Smart Object layer in the document.  Specifically because it has done that and is a "raw file smart object" it knows to go back to Camera Raw when you double-click it.
-Noel

Similar Messages

  • Why doesnt the smart filter mask move with the smart object?

    OMG Why doesnt the smart filter mask move with the smart object?  Yikes Way PITA

    If you look at the other tread about transform Again and smart Object layers you will find I found there seems to be two flavors of Transform and some bazar behaviors when it come to smart object layers. http://forums.adobe.com/message/4611500#4611500
    However for this problem here I think I can not show you how to do it.
    First target the smart filters Mask.  In fact so you can see what is happening Alt+Click on it so Photoshop displays the mask rather then the the composit image.  Then  use Ctrl+T free transform then just for a test hold down the Ctrl and the Alt keys and drag in a cornor to constrain and srink the Mask thee release the keys and press enter to commit the transform.
    Next target the smart object layer then use the short cut Ctrl+Shift+T (Transform Again) on a PC the smart object layer will be transformed to match the filter mask transform.

  • Can you replace embedded smart object with linked smart object?

    Hi,
    I'd like to update some document to reflet the new workflow that linked smart object provide. I have made some transformation on those embedded smart object and would like to not have to redo all those so is there anyway way to replace those SO with the linked version of the same SO?
    TIA
    Jeff

    Hi,
    I'd like to update some document to reflet the new workflow that linked smart object provide. I have made some transformation on those embedded smart object and would like to not have to redo all those so is there anyway way to replace those SO with the linked version of the same SO?
    TIA
    Jeff

  • Help with httpService returnFormat "object"

    Problem:
    My flex httpservice returns an xml file in the "object"
    resultFormat.
    How could I get the count of all childNodes of an object in
    that returned object tree.
    For example, in the xml file below:
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <reporting>
    <series>
    <title>Edge Page Views, in Page Views per
    Second</title>
    <xLabel>startdatetime</xLabel>
    <y1Label>sum(pageviews)</y1Label>
    <data>
    <x>1216233600</x>
    <y1>79.605</y1>
    </data>
    <data>
    <x>1216233900</x>
    <y1>78.076</y1>
    </data>
    </series>
    <series>
    <title>Total Bandwidth, in Mbits per
    Second</title>
    <xLabel>startdatetime</xLabel>
    <y1Label>sum(egress_bytes_mbps)</y1Label>
    <y2Label>combined_midgress_bytes_mbps</y2Label>
    <y3Label>ovh_bytes_mbps</y3Label>
    <y4Label>sum(ingress_bytes_mbps)</y4Label>
    <data>
    <x>1216233600</x>
    <y1>36.160352</y1>
    <y2>66.48362700000001</y2>
    <y3>66.48362700000001</y3>
    <y4>96.01235200000002</y4>
    </data>
    <data>
    <x>1216233900</x>
    <y1>34.260794</y1>
    <y2>62.10649799999999</y2>
    <y3>62.10649799999999</y3>
    <y4>88.902323</y4>
    </data>
    <data>
    <x>1216234200</x>
    <y1>35.329617</y1>
    <y2>62.77339099999999</y2>
    <y3>62.77339099999999</y3>
    <y4>89.30751</y4>
    </data>
    </series>
    </reporting>
    The first series element has 4 children
    I am able to get the number of data elements as:
    "resultObj.reporting.series[0].data.length"
    How do I effectively retreive:
    "resultObj.reporting.series[0].childNodes().length"
    Apparently this does'nt work, I also tried Nodes, children().
    Any documentation or help with this would be awesome
    Thanks a ton
    Pranay

    Can someone please help me understand this error maybe?
    I would appreciate it
    [MessagingError message='Destination 'the destination of an
    xml file' either does not exist or the destination has no channels
    defined (and the application does not define any default
    channels.)']
    what are channels?

  • Opening Smart Objects with AppleScript.  How do I open the inner PSD with applescript with a smart object?

    I have a PSD or a PSB.  I need to be able to open all of the smart objects in the file so that i can get to the inner psd files so i can pull data from those.  Is this possible?  If not it definitely should be.  Thank you very much.  I am on a mac and will be using applescript.

    You will NOT be able to do this directly with the model exposed to the AppleScript Dictionary…
    You may be able to dig deeper in to PS with Action Manager code…
    You can record this by using the scriptlistener plug-in…
    As far as AppleScript is concerned this is JavaScript so just pass it to the do javascript command

  • Working with a smart object

    I just watched a tutorial for the new blurs in Photoshop CS6.  They instructed to convert the pic to a smart object.  But when I did that the iris, field and tilt shift blurs were not being allowed to be applied.  Any suggestions as I am not that familiar with working with smart objects

    DLW Photography NYC wrote:
    I have 13.0.1 
    when I check for update it I get extension manager update 6.0.5 as the available update
    The feature you want isn't in 13.0.1. You need Creative Cloud Photoshop 13.1.2 for Blur Gallery as Smart Filter attached to Smart Object.
    http://helpx.adobe.com/photoshop/kb/new-system-requirements-photoshop-131.html
    If you have Windows then you need Windows 7 or 8 for Ps 13.1.2. What is your OS?

  • LR 2.1 Softproofing with CS3 Smart Object

    I have seen Jeff Schewe use a duplicate of the image to smart proof at least until Adobe gets this in LR (Can't Wait!) but some discussions say edit in a smart object.
    What advantage does this have over the way Jeff does this and is it done the same way with a duplicate image?

    My problem might be of a similar origin.
    I have also posted it on a different thread http://www.adobeforums.com/webx/.59b6903c
    I use mostly Hebrew characters for Keywording (the file names are in English) after opening in CS3 and saving, the keywords are converted from Hebrew fonts to accented fonts like åäöÅÄÖ.
    This didn't happen in LR1 and does not happen if I use CS3 as my secondary editor (not using the new LR2 edit in CS3 functionality)
    Shai

  • Duplicated document with the smart object which has a DNG file inside it

    A TIFF file has a DNG file as a smart object inside it ...
    If you duplicate this file, the smart object can not be opened any more.
    Any idea?
    Thanks ...

    I've looked at it again for TIFF after reading your post ... it is working now

  • Help with hp smart print

    I am running win 8 and have an hp allinone 6600 e printer and activated hp smart print and activated it as and add on in win explorer 10, it works to where i can select what i want to delete, but there is no where to go from there. is there an step by step instruction for smart print if so where?
    This question was solved.
    View Solution.

    There is a page with information about how to use Smart Print. Follow this link to get to the information.
    Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Help with filtering smart album

    Hi
    Wonder if any of you clever bods can figure this out, as I am unable to.
    I have a project that contains files of .NEF, .jpg (750px web proofs) and .jpg's (hires retouched) between 2-8mb in size.
    I am trying to create a smart album that will show only '.jpg' that are over 750 pixels in size (ie. just the hires retouched), however I cannot figure how to setup the filtration on a smart album.
    I can start the first sequence, for example 'Show only files which end with .jpg' (which gets rid of the NEFs). However if I put the next filter line in to show files over 1mb, the NEFs show up again.
    Very confused, any help very welcome.
    Kindest
    Kiran

    Gary
    U R A Genius!!
    Thanks
    Kiran

  • Help with set(index, object) please / new to java

    private static void setDobject(Rectangle [] setrect)
              LinkedList<Rectangle> rects = new LinkedList<Rectangle>();
              Rectangle myrectangle = new Rectangle(9.0,9.0);                                                                  
                 rects.set(1,myrectangle);
              for(Rectangle x : setrect)
                   System.out.print("Rectangle: ");
                   System.out.println(x.getLength() + " by " + x.getWidth());
              }  //End of for loop
         }  //End of unsorted
         }  the other previous code works, i have used the add(object) and it works here is the code for that:
    private static void addDobject(Rectangle [] addrect)
              LinkedList<Rectangle> rects = new LinkedList<Rectangle>();
              Rectangle myrectangle = new Rectangle(9.0,9.0);                                                                  
                 rects.add(myrectangle);
                 for(Rectangle x : rects)
                   System.out.print("Rectangle: ");
                   System.out.println(x.getLength() + " by " + x.getWidth());
              }  //End of for loop
              System.out.println();
         }  //End of unsorted
    this is the output error it is giving me :
    Part 1 : An Array List of Rectangles
    Enter length or 999 to exit: 3
    Enter width: 2
    Enter length or 999 to exit: 1
    Enter width: 2
    Enter length or 999 to exit: 10
    Enter width: 20
    Enter length or 999 to exit: 999
    Rectangle: 3.0 by 2.0
    Rectangle: 1.0 by 2.0
    Rectangle: 10.0 by 20.0
    Display Object with added item
    Rectangle: 3.0 by 2.0
    Rectangle: 1.0 by 2.0
    Rectangle: 10.0 by 20.0
    Rectangle: 9.0 by 9.0
    Displaying Objects with SET item
    Exception in thread "main" java.lang.IndexOutOfBoundsException: Index: 1, Size:
    0
    at java.util.LinkedList.entry(LinkedList.java:365)
    at java.util.LinkedList.set(LinkedList.java:328)
    at Lab11.setDobject(Lab11.java:129)
    at Lab11.main(Lab11.java:78)
    Press any key to continue...
    finally here is the Rectangle class i'm using:
    public class Rectangle
        private double length;     // Instance variables
        private double width;
        public Rectangle(double l, double w)  // Constructor method
            length = l;
            width = w;
        } // end Rectangle constructor
        public double getLength()             // getter 
             return length;
        } // end getLength
         public double getWidth()             // getter 
             return width;
        } // end getWidth
        public void setLength(double l)      // setter 
             length = l;
        } // end setLength
         public void setWidth(double w)     // setter 
             width = w;
        } // end setWidth
         public double calculateArea()         // calculation method
            return length * width;
        } // end calculateArea
        public void displayRectangle()         // display method
            System.out.println("Rectangle Length = " + length);
            System.out.println("Rectangle Width = " + width);               
        } // end displayRectangle
    } // Rectangle ClassHope you can help guys! thanks!

    LinkedList<Rectangle> rects = new LinkedList<Rectangle>();rects is an empty LinkedList at this point. It has no elements added to it.
    rects.set(1,myrectangle);So you can't set the item at index 1 (the 2nd element in the list) because it doesn't even exist. You need to add items to it.

  • Help with a Invalid Object

    Hello!
    I have here 6 invalid objects, but 5 are view's and olny this is a procedure that i dont now where i put the INTO that the oracle say me. Somebody can help me?
    the error message is:
    Line # = 51 Column # = 4 Error Text = PLS-00428: an INTO clause is expected in this SELECT statement
    and the SELECT is:
    SELECT clientemp.rut, REPLACE (razon, '''', '') AS RAZON, ultima_boleta.numdoc AS NUMDOC,
    TO_CHAR (ultima_boleta.fecvct, 'dd-mm-yyyy') AS FECHA_ULT,
    SUM (saldo) - NVL (SUM (saldo_cuotas), 0) AS SALDO
    FROM clientemp, cuotas_novencidas, ultima_boleta
    WHERE empresa = '760208701'
    AND sede = 'Santiago'
    AND SALDO > 0
    AND SALDO <= 99999999
    AND cuotas_novencidas.cliente(+) = clientemp.cliente
    AND ultima_boleta.cliente = clientemp.cliente AND LENGTH(clientemp.rut)<10
    GROUP BY clientemp.rut,
    clientemp.cliente,
    REPLACE (razon, '''', ''),
    ultima_boleta.numdoc,
    TO_CHAR (ultima_boleta.fecvct, 'dd-mm-yyyy');
    i allready tryed so many options, but without solution.
    Thanks!

    When I see this error... I could assume that the select statement is inside a PL/SQL block.
    And you might need these columns into the variables. If you have declared the variables, make an "INTO" into those from these columns you are selecting.
    example:
    declare
    num number;
    begin
    select 1 into num from dual;
    dbms_output.put_line(num);
    end;

  • Help with a program (object modelling)

    Hi. I hope someone can help me with this, give me some hints.
    First there is a category Human, which has information about name, gender and age.
    Human shall be saved in a class Town using a table.
    The constructor Town(int numberhumans) has parameters, which says the number of humans the town can have (maximum).
    Can anyone help me get started?

    Great, let's see the code you've come up with so far.

  • Help with constraints on object relational tables

    Hi
    I am looking to create an object relational database with a check constraint on the relationships. For example:
    * I have table called person_tab which is a table of person_t type.
    * Person_t type is inherited by the manager_t type and the applicant_t type.
    * I have a second table called interview_tab of interview_t type.
    * The interview table has two columns (manager and appilcant) that are scope restrained to the person table.
    * I would also like to put check constraints on these columns to say:
    ----- Manager: check the person_number is less than 20000
    ----- Applicant: check the person_number is greater than 19999
    Can anyone tell me if this is possible and if so how can it be done?
    Thanks in advance
    Stephen

    You have circular dependencies (manager_t depends upon interview_list_t depends upon interview_t depends upon manager_t) which I don't think is a good idea. But then that's probably just my old-fashioned relational head baulking at this new-fangled OO way of looking at data models. However, my experience with using types and subtypes in Oracle does teach me that this is a complete pain in the neck, because it makes changing your Type definitions a very awkward process.
    am I right in saying I cannot use the check constraint?I think so. If the value range for ID is a property of being a Manager or an Applicant then properly that should be enforced by those types not by the Interview type. Then all that Interviews needs to worry about is that it gets instantiated with attributes of the correct Type.
    I've simplified your model a bit. To start with I'm going to create a single PERSONS table to store both managers and applicants...
    SQL> CREATE TYPE person_t AS OBJECT (
      2  personno NUMBER,
      3  surname VARCHAR2(30),
      4  forename VARCHAR2(30),
      5  dob DATE
      6  ) NOT FINAL;
      7  /
    Type created.
    SQL>
    SQL> CREATE OR REPLACE TYPE applicant_t UNDER person_t
      2  (qualifications varchar2(200))
      3  FINAL ;
      4  /
    Type created.
    SQL>
    SQL> CREATE OR REPLACE TYPE manager_t UNDER person_t
      2  (extension varchar2(5)) FINAL;
      3  /
    Type created.
    SQL>
    SQL> CREATE OR REPLACE TYPE interview_t AS OBJECT (
      2  interviewno NUMBER,
      3  idate DATE,
      4  itime NUMBER,
      5  interest NUMBER,
      6  is_made_by REF manager_t,
      7  attended_by REF applicant_t
      8  ) ;
      9  /
    Type created.
    SQL>
    SQL>
    SQL> CREATE TABLE persons OF person_t
      2  /
    Table created.
    SQL> CREATE TABLE interviews OF interview_t
      2  /
    Table created.
    SQL> Okay let's create some objects...
    SQL> declare
      2     mgr manager_t := manager_t(1,'RUNCITER', 'GLEN', sysdate - (42*365), 'x1234');
      3     app applicant_t := applicant_t(2,  'CHIP', 'JOE', sysdate - (38*365), 'BSc, MSc');
      4     intv interview_t;
      5     m_ref REF  person_t;
      6     a_ref REF person_t;
      7  begin
      8     INSERT INTO persons p VALUES mgr
      9         RETURNING REF(p) INTO m_ref   ;
    10     INSERT INTO persons p VALUES app
    11         RETURNING REF(p) INTO a_ref   ;
    12     insert into interviews
    13     values (interview_t(1001, sysdate, 45, 5, TREAT(m_ref AS REF manager_t)
            , TREAT(a_ref AS REF applicant_t)));
    14  end;
    15  /
    PL/SQL procedure successfully completed.
    SQL> SELECT i.interviewno, i.is_made_by.surname, i.attended_by.surname
      2  FROM interviews i
      3  /
    INTERVIEWNO IS_MADE_BY.SURNAME             ATTENDED_BY.SURNAME                 
           1001 RUNCITER                       CHIP                                
    SQL> Have we got integrity?
    SQL> rollback
      2  /
    Rollback complete.
    SQL>
    SQL> declare
      2     mgr manager_t := manager_t(1,'RUNCITER', 'GLEN', sysdate - (42*365), 'x1234');
      3     app applicant_t := applicant_t(2,  'CHIP', 'JOE', sysdate - (38*365), 'BSc, MSc');
      4     intv interview_t;
      5     m_ref REF  person_t;
      6     a_ref REF person_t;
      7  begin
      8     INSERT INTO persons p VALUES mgr
      9         RETURNING REF(p) INTO m_ref   ;
    10     INSERT INTO persons p VALUES app
    11         RETURNING REF(p) INTO a_ref   ;
    12     insert into interviews
    13     values (interview_t(1001, sysdate, 45, 5, TREAT(a_ref AS REF manager_t)
             , TREAT(m_ref AS REF applicant_t)));
    14  end;
    15  /
    PL/SQL procedure successfully completed.
    SQL>
    SQL> SELECT i.interviewno, i.is_made_by.surname, i.attended_by.surname
      2  FROM interviews i
      3  /
    INTERVIEWNO IS_MADE_BY.SURNAME             ATTENDED_BY.SURNAME                 
           1001                                                                    
    SQL> Kind of, but it's not very satisfactory. Let's use separate tables for MANAGERS and APPLICANTS...
    SQL> rollback
      2  /
    Rollback complete.
    SQL>
    SQL> CREATE TABLE managers OF manager_t
      2  /
    Table created.
    SQL>
    SQL> CREATE TABLE applicants OF applicant_t
      2  /
    Table created.
    SQL> declare
      2     mgr manager_t := manager_t(1,'RUNCITER', 'GLEN', sysdate - (42*365), 'x1234');
      3     app applicant_t := applicant_t(2,  'CHIP', 'JOE', sysdate - (38*365), 'BSc, MSc');
      4     intv interview_t;
      5     m_ref REF  manager_t;
      6     a_ref REF applicant_t;
      7  begin
      8     INSERT INTO managers m VALUES mgr
      9         RETURNING REF(m) INTO m_ref   ;
    10     INSERT INTO applicants a VALUES app
    11         RETURNING REF(a) INTO a_ref   ;
    12     insert into interviews values (interview_t(1001, sysdate, 45, 5, m_ref, a_ref));
    13 
    14  end;
    15  /
    PL/SQL procedure successfully completed.
    SQL>
    SQL> SELECT i.interviewno, i.is_made_by.surname, i.attended_by.surname
      2  FROM interviews i
      3  /
    INTERVIEWNO IS_MADE_BY.SURNAME             ATTENDED_BY.SURNAME                 
           1001 RUNCITER                       CHIP                                
    SQL> rollback
      2  /
    Rollback complete.
    SQL> declare
      2     mgr manager_t := manager_t(1,'RUNCITER', 'GLEN', sysdate - (42*365), 'x1234');
      3     app applicant_t := applicant_t(2,  'CHIP', 'JOE', sysdate - (38*365), 'BSc, MSc');
      4     intv interview_t;
      5     m_ref REF  manager_t;
      6     a_ref REF applicant_t;
      7  begin
      8     INSERT INTO managers m VALUES mgr
      9         RETURNING REF(m) INTO m_ref   ;
    10     INSERT INTO applicants a VALUES app
    11         RETURNING REF(a) INTO a_ref   ;
    12     insert into interviews values (interview_t(1001, sysdate, 45, 5, a_ref, m_ref));
    13 
    14  end;
    15  /
       insert into interviews values (interview_t(1001, sysdate, 45, 5, a_ref, m_ref));
    ERROR at line 12:
    ORA-06550: line 12, column 69:
    PL/SQL: ORA-00932: inconsistent datatypes: expected REF APC.APPLICANT_T got REF
    APC.MANAGER_T
    ORA-06550: line 12, column 4:
    PL/SQL: SQL Statement ignored
    SQL>I hope that's useful to you.
    Cheers, APC
    Layout of SQL*Plus session tweaked for readability
    Message was edited by:
    APC

  • Need Help with Mail Smart Mailboxes

    I'm just getting started with Smart Mailboxes and seem to be stuck on a key feature. Once I've set up the criteria for the mailbox and the incoming mail goes into the Smart Mailbox, how can I delete it from my inbox without losing it in the Smart Mailbox? Am I missing something here with the concept? I'm tired of moving mail into specific mailboxes and thought this might be the solution but now I'm not sure. Anyone have any suggestions on this?

    A Smart Mailbox is just a search. Messages are not "in" the Smart Mailbox, it is a list of messages that satisfy the search criteria. The messages must reside elsewhere.
    If you want to automatically move messages to regular mailboxes, use Rules, rather than Smart Mailboxes.

Maybe you are looking for