Help with Crossfire on the KA92 Platinum Motherboard

I am still working out other issues with my system, but from day one, when everything was perfect, I wasn't able to setup crossfire. Both video cards are new and the same, (2600XT MSI Radeon 512MB GDD4), and both cards are recognized under device manager. I have downloaded the newest drivers and Cataylst Control Console, yet the option tab for Crossfire is not showing. I have both crossfire cables hooked up, and have the cards in PCI-E slots 1 and 3 (both dark blue) on the motherboard. The cards will not physically fit in slots 1 & 2. The heatsinks are just way to large. Any ideas or tips would be helpful. Once I get my new board, this is my next issue. MOBO bios ver. 1.3. Thanks, Todd.

Quote from: Untouchable03 on 16-April-08, 07:38:51
I am running Vista Home Premium 64-bit.
Vista..
Go for those MS$ Patches 1st:
Vista Microsoft SLI and CrossFire HotFIX:
http://support.microsoft.com/kb/936710
Vista MutiGPU HotFix:
http://support.microsoft.com/kb/945149
Once done, boot in "Safe Mode" and remove current VGA drivers with Driver Sweeper: http://www.guru3d.com/index.php?page=driversweeper
Reboot, then download and install latest ATI Drivers:
http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista64/common-vista64

Similar Messages

I had to put my computer by together without migration or time machine I NEED help with order of the files?

I had to put my computer by together without migration or time machine I NEED help with order of the files?

Hi, where are these other files exactly?

Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

Hello Priyanks,
I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thank you for using Apple Support Communities.
Best,
Sheila M.

Please i need help with switch from the us store to malaysian store how i can switch

Please i need help with switch from the us store to malaysian store how i can switch

Click here and follow the instructions to change the iTunes Store country.
(82303)

PowerDVD Software with a MSI K8N Neo4 Platinum Motherboard

I have a system built around an MSI K8N Neo4 Platinum motherboard. I'm using the motherboard's onboard sound, and I have it connected to a 5.1 speaker system. Has anyone with a similar setup been able to play DVD-Audio discs with surround sound? I tried WinDVD 6 Platinum, but while I could get awesome surround sound from a regular DVD, I only got stereo sound from a DVD-Audio.
Has anyone used PowerDVD Deluxe? According to what I've read, it supports DVD-Audio surround playback, but I'd like to verify that it works before shelling out $70.
A.J.

Quote
And specifically using the onboard sound of a MSI K8N Neo4 Platinum Motherboard?
Nope, I'm sorry - it does not make much sense to do that when you have a real soundcard - I will look into the DVD-Audio thing for you, though. Just out of curiosity: why would you want to use a format specifically designed to provide the highest possible audio fidelity with on-board sound?

Help with form sending the data to email

I have looked all over the Internet for help with this. I have tried numerous video tutorials and for some reason I can't get it to work. I have created a form in flash cs4 AS2. It is a contact information form where the user fills out their information and sends it. I have created a the form in a movie clip (I have also tried it not in a movie clip) with the form components inside that movie clip. I have given each component on the form an instance name.
The form has:
Full name (with instance name=name)
Company (with IN =company)
Title (with IN = title)
Phone (with IN = phone)
Email (with IN = email)
Topic combobox (with IN=topic)
Message box (with IN=msg)
Submit button (with IN=submit)
I need help with the actionscript writing. I am VERY new to flash and have never done any scripting really. Does anyone have a sample file I can look at to see how it works or can someone IM me and I can send my file for them to help me?
My IM is logan3975
Any help is greatly appreciated. I consider myself a pretty technical person so I do learn quick...I just need some guidance until I wrap my head around how this all works. Thanks.

Here's a link to a posting elsewhere some had had that may provide some useful info (?)
http://board.flashkit.com/board/showthread.php?t=684031

Help with Chicken of the VNC and Airport

I had my airport working with Chicken of the VNC perfectly and lost the settigns. Now I cannot get it to work again. What do I do a bridge or port forwarding? And how?
There is so much contradictory information that I have just spent the whole night not doing anything of use. Any precise help would be greatly appreciated.
Thanks in advance!

The basic steps to configure for VNC are as follows:
o Configure the machine you want to control (VNC Server) to allow VNC access. If the VNC Server is behind a router, then this would entail at least three things: 1) Configure the OS X Firewall to allow VNC access, 2) Configure the router to map port 5900 to the VNC Server, and 3) Know the WAN IP address of your router. (Note: One way to get the WAN IP is to go to the web site http://whatismyip.com and make a note of the ip address.)
o Connect to your VNC Server from a VNC Client from the Internet.
And I tried to do port forwarding but it doesn't seem to work.
Let's double-check your port mapping settings.
1. Reserve a DHCP-provided IP address for the VNC Server.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the VNC Server>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <you can ignore this setting>
o Public UDP Port(s): 5900
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the VNC Server from the above step>
o Private UDP Port(s): 5900
o Private TCP Port(s): 5900
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

Help getting help with iTunes (or, the elusive product registration number)

My almost brand-new iPOD classic is now useless because iTunes no longer works on my Vista 64. It was fine for a while. Now, when my computer starts up, I get an error message that reads:
iTunes was not installed correctly. Please reinstall iTunes Error 7 (Windows error 14003).
I tried all the obvious stuff, and then decided, what the heck, I'm a paying customer, I'll get some online help for Apple. But much to my frustration and rage, I can't get any help without my product registration number. I can't read the microscopic number on the back of my iPod, and because i can't open iTunes, I can't find my registration number that way. Do you know, you can't even call Apple without the product registration number? So I can't get any help. I'm so frustrated. I got my iPod on Airmiles, so I don't even have a bill.
Is there any other way to find my registration number?

hi dan,
i am using iWeb for a non .Mac account! the reason behind is that external hosters offer better online space and loading times than .Mac. Yet on the other hand, the iDisk, Web-Mail, Addressbook and iCal features that are offered with .Mac make the 99€ a year quite worthy!
i myself do not use .mac because my website is simply to large and the prices are not accepteable that .Mac offers for more space!
the next thing is that your .Mac account username will be in you URL and you cannot stay anonymous! your address will be something like this:
http://web.mac.com/USERNAME
so now you will share your username with the whole wide world! the other thing is that iWeb was designed to work hand in hand with .Mac. This means that some cool feature fall off when you publish externally, meaning to a different host, eg.: 1and1, godaddy, strato. These features include Slideshows, Password-Protection, Blod-Search and other small things!
yet when you still choose to go for .Mac - no one will get your address unless you tell them what the address is! it is extremely hard to find, if not impossible, your .mac address under Google or Yahoo! So your username is somewhat protected!
Here are some good hosters:
http://godaddy.com
http://1and1.com
http://strato.de (german)
you practically have to also see for your country what hosters offer. 1and1 is extremely cheap and is over the world! Yet when you choose to have a external host - then you have to pay extra and if you close your .Mac account you cannot buy music in the itunes store!
here is a very good FTP program to upload your files to a different host:
http://cyberduck.ch
http://karreth.com/iweb/Host%20To%20Other%20Than%20.Mac.html
i hope that helped!
max

Help with printing out the # of quarters, nickels, dimes, and etc... using

Hi, im new to java and im using a program called blue j.
anyway heres my question.
, I recommend you dont do the program for me, but rather help gear me in the right direction of things.
In this program they want me to have it print out the # of dollars,quarters,nickels,dimes, and pennies.
They have provided me with a base program to start off with which is this.
import chn.util.*;
public class ComputeChange
   * The main program for the Change class
   * @param args The command line arguments - not used
public static void main(String[] args)
    double purchase, cashPaid, temp;
    int change, remainder, dollars, quarters, dimes, nickels, pennies;
    ConsoleIO keyboard = new ConsoleIO();
    System.out.print("Enter amount of purchase --> ");
    purchase = keyboard.readDouble();
    System.out.print("Enter amount of cash paid --> ");
    cashPaid = keyboard.readDouble();
    temp = cashPaid - purchase;
    dollars = (int) temp;
    temp = temp - (int)temp + 0.0000001;
    change = (int)(temp * 100);
    System.out.println();
    System.out.println("$" + dollars + "." + change);
}Ive been given the amounts 23.06 for amount of purchase
and 30.00 for the amount paid. that should give me the difference of $6.94
It should print out the amount of change as the following
6 dollars
3 quarters
1 dime
1 nickel
1 penny.
IVe tried a few methods for printing out the # of each coin type, but i simply dont get how they are using temp or what type of funciton i need to follow. Any hints or pointings in the right direction would help. Since i need to learn this.
Thanks a lot and i hope i can get some tips. !
~Jbinks

And here's my contribution to the scratch batch... :o)
class Coins {
    private java.util.Map<Coin, Integer> count = new java.util.HashMap<Coin, Integer>();
    enum Coin {
        DOLLAR(100), QUARTER(25), DIME(10), NICKEL(5), PENNY(1);
        private final int value;
        Coin(int value) { this.value = value; }
        public int value() { return value; }
    public Coins(int centsValue) {
        for (Coin c : Coin.values()) {
            count.put(c, centsValue / c.value());
            centsValue %= c.value();
    public void display() {
        for (Coin c : Coin.values()) {
            System.out.println(c + ": " + count.get(c));
public class CoinsDemo {
    private static java.util.Scanner keyboard = new java.util.Scanner(System.in);
    public static void main(String[] args) {
        int price = getPennies("Enter amount of purchase --> ");
        int paid = getPennies("Enter amount of cash paid --> ");
        new Coins(price - paid).display();
    private static int getPennies(String prompt) {
        System.out.print(prompt);
        double d = keyboard.nextDouble();
        System.out.println();
        return (int)(d * 100);
}

I need help with problems after the April 2015 update

In December 2015 I purchased an LG G3. It started out great. Then often people couldn't hear me..sometimes with the speaker on, sometimes with it off, sometimes on bluetooth with my car,.or my voice faded in and out, or sounded muffled or garbled. After over a month of these frequent audio problems and several calls to Verizon during which they boosted my signal and guided me through a factory reset which took all of my photos out of their albums, the final suggestion a few days ago (April 21, 2015) was to download the new software update. I did and I'm not happy with some of the changes e.g. I wish I could have the old home touch buttons back,The jury is still out on sounds quality, but now I have two new annoying problems.
The first is that my car and phone used to bluetooth (connect) as soon as I put my engine on. Now, every time I get in my car I have to go into settings and give the phone permission to have other devices find my phone. Then after one or two tries the bluetooth eventually connects them. I am a Realtor and I need my phone and car to connect automatically every time I get in. I can give the phone permission to connect for up to an hour, but then it goes off. How do I get the opton to stay on?
The second is that I often turn my data off, and I used to do it from the notification panel that I can pull down. I just pulled it down and tapped "data" and the light would go off if the data was off and on if it was on. Now when I tap "data" I can turn it on or off, but the data button stays lit so when the data is off the light is still on. No more quickly glancing to see the data status...I have to tap it and read the notice to find out. Yes, 3G or 4G light up in tiny letters at the top, but data is the only button that stays lit when it is turned off.
Am I missing the steps that would fix these issues?

SiBIMe,
I am sorry to hear of the issues with your device before and after the update. We want to restore the love back to your device. Please keep us posted on the audio issues to see if the update did assist with that issues.
In regards to the two new problems, we want to make sure we get this worked out. Do you have issues with the device only auto connecting to your car or all bluetooths? Do you receive and error message when the device doesn't auto connect and you attempt to connect manually but it fails? As for the data icon, when you tab on the data icon from the notification tab does the 4G actually disappear even thought the data icon is still lit?
Please test your device in Safe mode and let us know if you still experience the same issues. Here is how to place the device in safe mode. http://vz.to/1owbN8K
LindseyT_VZW
Follow us on Twitter @VZWSupport

Help with a hunt the wumpus game

I accidently posted this question on the wrong section so i'm posting it again here.
i'm trying to write the hunt the wumpus game with simple conditions: (check-marked the ones i already accomplished)
[x]the pits will be placed randomly
[x] the wumpus is placed in the maze randomly (not sure if i did that one correctly)
[x] the player starts on the lower left of the maze row 3 col 0
-the player will only have 1 chance to shoot the Wumpus
[x]if the player is close to the Wumpus then there would be a prompt saying there is stench around
[x]if the player is close to a pit then she/he will be prompted that there is a breeze.
-if the player falls in a pit or gets eaten by the wumpus the game will be over and the map of the maze will be shown. I used 0 for empty cells and p for pits and w for wumpus in the array.
There is some problem with the program i've written so far but i don't know how to fix it. also, i don't know how to check if the wumpus will be in the direction the player wants to shoot. i'd appreciate any suggestions
import java.util.*;
public class playWumpus
    //initMaze METHOD
    //put the pits and wumpus into the world
    public static void initMaze(char [][] maze)
        Random r = new Random();
        for (int row = 0; row <4; row ++)
            maze[row][col] = '0';    <<<<<<there is a problem here: col cannot be resolved
        int pitRow, pitCol;
        for (int pitNum = 0; pitNum <4; pitNum++)
            pitRow = r.nextInt(4); //randomly choose row
            pitCol = r.nextInt(6); //randomly choose column
            if (pitRow == 3 && pitCol == 0)//start location
                pitCol=5;
        maze [pitRow][pitCol] = 'p'; //places the pits in the maze randomly
        maze [r.nextInt(4)][r.nextInt(6)] = 'w'; //places the wumpus randomly in the maze
    }// end of Maze method
    //CHECKMOVE method
    //possible outcomes: run into the wall , fall into the pit, eaten by wumpus,
    //feel breeze, smell stench, nothing.
    public static int checkMove(char [] [] maze, int newRow, int newCol)
        //checks if they run into a wall
        if (newRow<0 || newRow>3 || newCol<0 || newCol>5)
            System.out.println("You hit a wall");
            return 0;
            // it will return to the main method and places 0 in the state variable
        else if (maze[newRow][newCol] == 'p')
        //this checks the maze if there is a P in that location
            System.out.println("You fall into a pit");
            return 2;
            // it will return to the main method and places 2 in the state variable
        else if (maze[newRow][newCol] == 'w')//checks for the wumpus
            System.out.println("You've eaten by the Wumpus!!");
        //checks for the breeze (right,left,down,up)   //<<is the following if-statement correct?>>>
        if (
            (newCol>0 && maze[newRow][newCol-1] == 'p') ||
            (newCol<5 && maze[newRow][newCol+1] =='p') ||
            (newRow>0 && maze[newCol][newRow-1] == 'p') ||
            (newRow<3 && maze[newCol][newRow+1] =='p')
            System.out.println("You feel a breeze");
        return 1;
    }//end of the maze method
    public static void main(String [ ] args)
        char [ ] [ ] maze = new char [4][6]; //the actual map of the game
        int playerRow=3, playerCol=0; // player location aka lat/long
        Scanner in= new Scanner(System.in);   //<<there is something wrong with my scanner:The method nextInt(int) in the type Scanner is not applicable for the arguments (InputStream)>>>
        int move, state;
        // state of the game
        // state   0= illegal move, 1= legal move, 3= end game
        initMaze (maze); // calling the initMaze method
        do
            System.out.println("What would you like to do? 1=up, 2=down, 3=right 4=left, 5=shoot");
            move = in.nextInt(System.in);   //<<eclipse is telling me that the type is incorrect>>
            if (move ==1) // move up in the world
                state = checkMove(maze, playerRow-1,playerCol); //these are coordinates
                if ( state >0 ) // legal move
                    playerRow = playerRow-1;
            if (move ==2) // move down in the world
                state = checkMove(maze, playerRow+1,playerCol);
                if ( state >0 ) // legal move
                    playerRow = playerRow+1;
            if (move ==3) // move right in the world
                state = checkMove(maze, playerRow,playerCol+1);
                if ( state >0 ) // legal move
                    playerCol = playerCol+1;
            if (move ==4) // move left in the world
                state = checkMove(maze, playerRow,playerCol-1);
                if ( state >0 ) // legal move
                    playerRow = playerCol-1;
            if (move == 5) // shoot the wumpus in the world
                System.out.println("Which direction would you like to shoot? 1=up, 2=down, 3=right, 4=left");
                int shootDir = in.nextInt(System.in);
                // check if the wumpus gets killed
                if ( shootDir == 1 ) //<<not sure on how to check if the dir they are shooting has the wumpus in there>>
                    System.out.println("You shot the Wumpus!");
        }while (state!=2);
    }//end of main
}//end of class

here is the whole code just in case you guys want to see it...yes i know it looks primitive to you experts but hey i can follow and understand what i've written and that's what matters ^.~))V
import java.util.*;
public class playWumpus
     //initMaze METHOD
     //put the pits and wumpus into the world
     public static void initMaze(char [][] maze)
          Random r = new Random();
          for (int row = 0; row <4; row ++)
            for (int col = 0; col<6; col ++)
                maze[row][col] = '0';
          int pitRow, pitCol;
          for (int pitNum = 0; pitNum <4; pitNum++)
               pitRow = r.nextInt(4); //randomly choose row
               pitCol = r.nextInt(6); //randomly choose column
               if (pitRow == 3 && pitCol == 0)//start location
                    pitCol=5;
               maze [pitRow][pitCol] = 'p'; //places the pits in the maze randomly
          int wumpusRow = r.nextInt(4);
          int wumpusCol = r.nextInt(6);
          maze [wumpusRow][wumpusCol] = 'w'; //places the wumpus randomly in the maze
     }// end of Maze method
     //CHECKMOVE method
     //possible outcomes: run into the wall , fall into the pit, eaten by wumpus,
     //feel breeze, smell stench, nothing.
     public static int checkMove(char [] [] maze, int newRow, int newCol)
          //checks if they run into a wall
          if (newRow<0 || newRow>3 || newCol<0 || newCol>5)
               System.out.println("You hit a wall");
               return 0;
               // it will return to the main method and places 0 in the state variable
          //this checks the maze if there is a pit in that location
          else if (maze[newRow][newCol] == 'p')
               System.out.println("You fall into a pit. You lose!");
               return 2;
          //checks for the wumpus
          else if (maze[newRow][newCol] == 'w')
               System.out.println("You've been eaten by the Wumpus. You lose!!");
               return 2;
          //checks for the breeze (right,left,down,up)
          if (
               (newCol>0 && maze[newRow][newCol-1] == 'p') ||
               (newCol<5 && maze[newRow][newCol+1] =='p') ||
               (newRow>0 && maze[newCol][newRow-1] == 'p') ||
               (newRow<3 && maze[newCol][newRow+1] =='p')
               System.out.println("You feel a breeze");
          //checks for the wumpus' stench
          else if (
                    (newCol>0 && maze[newRow][newCol-1] == 'w') ||
                    (newCol<5 && maze[newRow][newCol+1] =='w') ||
                    (newRow>0 && maze[newCol][newRow-1] == 'w') ||
                    (newRow<3 && maze[newCol][newRow+1] =='w')
                    System.out.println("Something smells!!");
                    return 1;
          else
               System.out.println("Nothing happens.");
               return 1;
          return 1;
     }//end of the maze method
     public static void main(String [ ] args)
          char [][] maze = new char [4][6]; //the actual map of the game
          int playerRow=3, playerCol=0; // player location
          Scanner in= new Scanner(System.in);
          int move;
          int state = 1;
          // state of the game
          // state   0= illegal move, 1= legal move, 3= end game
          initMaze (maze); // calling the initMaze method
          do
               System.out.println("What would you like to do? 1=up, 2=down, 3=right 4=left, 5=shoot");
               move = in.nextInt();
               if (move ==1) // move up in the world
                    state = checkMove(maze, playerRow-1,playerCol); //these are coordinates
                    if ( state > 0 ) // legal move
                         playerRow = playerRow-1;
               if (move ==2) // move down in the world
                    state = checkMove(maze, playerRow+1,playerCol);
                    if ( state >0 ) // legal move
                         playerRow = playerRow+1;
               if (move ==3) // move right in the world
                    state = checkMove(maze, playerRow,playerCol+1);
                    if ( state > 0 ) // legal move
                         playerCol = playerCol+1;
               if (move ==4) // move left in the world
                    state = checkMove(maze, playerRow,playerCol-1);
                    if ( state >0 ) // legal move
                         playerCol = playerCol-1;
               if (move == 5) // shoot the wumpus in the world
                    System.out.println("Which direction would you like to shoot? 1=up 2=down 3=right 4=left");
                    int shootDir = in.nextInt();
                    if (shootDir==1 && playerRow>0)
                         if (maze[playerRow-1][playerCol] == 'w')
                              System.out.println("You shot the Wumpus!");break;
                         else
                              System.out.println("You missed! You lose!");break;
                    else if(shootDir==2 && playerRow<3)
                         if (maze[playerRow+1][playerCol] == 'w')
                              System.out.println("You shot the Wumpus!");break;
                         else
                              System.out.println("You missed! You lose!");break;
                    else if (shootDir==3 && playerCol<5)
                         if (maze[playerRow][playerCol+1] == 'w')
                              System.out.println("You shot the Wumpus!");break;
                         else
                              System.out.println("You missed! You lose!");break;
                    else if (shootDir==4 && playerCol>0)
                         if (maze[playerRow][playerCol-1] == 'w')
                              System.out.println("You shot the Wumpus!");break;
                         else
                              System.out.println("You missed! You lose!");break;
          }while (state!=2);
          //shows the user the map of the maze if he/she gets eaten or falls in a pit
               for(int row=0;row<4;row++,System.out.println())
                    for(int col=0;col<6;col++)
                         String loc = ""+maze[row][col];
                         loc += ((row == playerRow) && (col == playerCol)) ? "*" : "";
                         System.out.print(loc+"\t");
     }//end of main
}//end of class

Need help with bios settings for Neo4 Platinum

Hi. I've checked several guides on bioses and still have questions about my settings. I'm not an overclocker, so I'm looking for stability over anything else (although I don't want my computer to run like a pig . I'll post what I have and the parts of the bios that I'm unsure of. I also have saved pictures of a Cpu-z scan if that helps. Any suggestions are much appreciated!
Here's my stuff:
Motherboard: MSI K8N NEo4 Platinum (MS-7125)
Processor: AMD Athlon 64 3000+ 512K 90nm (Winchester socket 939)
   clock frequency: 1800mhz
   system bus: 2000
   operating mode: 32/64
   voltage: 1.40v
   max temp: 70 degrees C
   thermal power: 89w
   L1 cache: 128KB
   L2 cache: 512KB
   cmos technology: 90nm SOI
   memory controller: 128-bit
Award bios version: 1.9
Installed ram: Micron Crucial Ballistix 512MBx2 (1024MB total) (Crucial
part number BL6464Z402)
   PC3200 400mhz Dual-Channel DDR Dimm (184 pins)
   configuration: 64Meg x 64
   unbuffered/non-ecc
   voltage: 2.8v
   memory timings:   2-2-2-6
Here's my current bios settings (I've only listed sections that contained settings that I was unsure of):
ADVANCED BIOS FEATURES
quick booting: enabled
boot to os/2: no
ioapic function: enabled
mps table version: 1.4
full screen logo display: disabled
seek floppy: enabled
typematic rate setting: enabled
typematic rate: 30
typematic delay: 1000
security option: setup
ADVANCED CHIPSET FEATURES
--->>DRAM CONFIGURATION
timing mode: manual
memclock index value: 200mhz
cas# latency TCL:2
min ras# active time TRAS: 6t
ras# to cas# delay TRCD: 2t
row precharge time TRP: 2t
row to row delay TRRD: auto
row cycle time TRC: 8t
row refresh cyc time TRFC: 11t
read-to-write time TRWT:auto
write recovery time TWR:auto
write to read delay: TWTR:auto
refresh period TREF:auto
user config mode: auto
x bottom of 32-bit [31:24] io: D8
x 1t/2t memory timing: 2t
x read preamble value: 8ns
x async latency value: 9ns
s/w memory hole remapping: disabled
mtrr mapping mode: continuous
PNP/PCI CONFIGURATIONS
primary graphic's adapter: first pcie
resources controlled by: auto (escd)
x irq resources setup: press enter
maximum payload size: 4096
CELL MENU
current cpu clock: 1810 mhz
current ddr clock: 201 mhz
high performance mode: manual
aggressive timing: disabled
dynamic overclocking: disabled
adjust cpu fsb frequency: 200
ht frequency: 5x
ht width: (down arrow 16/up arrow 16)
cpu spread spectrum: disabled
sata spread spectrum: disabled
pcie spread spectrum: disabled
pcie clock: 100 mhz
sse/sse2 instructions: enabled
cool'n'quiet: disabled
adjust cpu vid: startup
extra cpu voltage: by cpu vid
cpu voltage 1.400v
memory voltage: auto
nf4 voltage: 1.50v
Thanks again. xpfshost

I'll do that, thanks. I guess I'm really mostly clueless about the following items:
memclock index value: 200mhz
row cycle time TRC: 8t
row refresh cyc time TRFC: 11t
current cpu clock: 1810 mhz
current ddr clock: 201 mhz
adjust cpu fsb frequency: 200
ht frequency: 5x
ht width: (down arrow 16/up arrow 16
pcie clock: 100 mhz
Do they look OK?? Thanks!
xpfshost
Quote from: Grayone on 19-April-07, 05:13:03
Change your user config mode in dram configuration to manual and change your memory timing to 1T. The 1T setting will speed up your memory slightly.

Help with msi k8n nforce 4 platinum

recently my mobo msi k8n nforce4 platinum SLI burned. the northbridge chipset caught fire.
i found a used msi k8n nforce 4 platinum but NOT sli.
my processor is a 4400 amd socket 939 dual core.
os: windows vista with sp1.
1) i just installed the mobo and boot my pc. vista booted correctly, installed all the new controllers, restarted BUT from that moment i cant use the cool n quiet mode , vista shows that i have 16gb of ram!!! but i have only 2, and the mobo shows that the model of my 4400 is unknown so it cant show the one processor!! it olny shows one processor...
cool and quiet is enabled from the bios. but everest or amd power monitor shows 1,39 volt instead of 1,10 i used to have when the processor worked idle..
2) how can i change the rate of the ram in bios? in my previous mobo had specific option to choose between 1T or 2T. Now i cant find that option.. can you help me?
Thank you and sorry for my english...
bios version show on first screen 031105

sorry i didnt wrote the solution, i assumed you understood the bios issue.
my mobo had a bios with date 031105 now has the latest bios from the official site of msi
at the beginning a assumed that it had the latest bios because the guy i bought from told me that he had flashed the mobo with the latest bios so i didnt think to look for a bios from the beginning.

Need help with info about the possibility of altering images when saved in a different format

I am very new to the design world. I have a printing business and received and image to be printed in Adobe Acrobat (I think). I needed to resize the image to be printed and took it into Photoshop CS6 where I cropped the edges. I then resave it as a PDF and took into a printer software, Fiery. Fiery has an Impose function where you can repeat an image to layout it on the correct paper size. It essentially just copies the original image several times depending on the layout. This particular image I repeated to 3 up and 1 across. When printed it came out with a magenta streak through the center image only. I have had the machine checked and they are adamant it's not a printer issue but a software issue. That once I altered the original image by resizing it that I altered the image and that I can't expect it to come out as seen on the screen. I've printed it all sorts of different ways and it only occurs with the 3 up 1 across image. I know that images can be changed when saved from program to program but this situation does not make sense that it is only the one area and layout that this shows up. I would appreciate any help, input, answers that anyone has. Again, I'm new to this and would like to understand if this is a potential for further printing jobs so that I can do what I need to avoid this situation.
Thank you for your time.
Jessica

Jessica,
Without knowing how the original graphic was created it is hard to tell you how to handle it. What is the name of the file? (Only the file suffix is important). If the file's origin was in a drawing program and/Or InDesign, then the document should be handled differently if the document is a raster image best handled by a program like Photoshop.

Need help with working in the background while doing a presentation

Hi guys,
I wanted to know if my MBP had a way to let me do a presentation, where on my screen I could tell it to present what I wanted it to present rather than showing every single move that I would make. If for instance, I were to open an app for looking up something to present, I wouldn't want people to see that action, but rather the things that I would put on a special window or virtual place created just for that.
Maybe there's an app that will let me do this? What happens to me know is that when I connect the MBP to the data show presenter, everything I do gets displayed on the big screen on the wall. I want to work in the background without people seeing that. Please help. Thanks.

The system software makes it about as easy as possible. Press fn+F7 (the pictographic mnemonic on the F7 kety is two overlapping rectangles). This will toggle the display mode between mirroring (same image on internal and external display) and spanning (each display independently contributing to the total viewable area).
As a bonus when using Keynote (the presentation software from iWork) in a dual-screen configuration, you get one display showing the presentation and the other showing you context (the upcoming slide) and a timer. Check out the demo included with you MacBook.
Randall Schulz

Help with Crossfire on the KA92 Platinum Motherboard

Similar Messages

Maybe you are looking for