Help with loading in the mx:html tag please

Hi everyone,
I have just started working on this air application, it is for a online comic site and will be used to upload the comics.  We alredy have html files for each of the sections and want to link to them, so far i have tried to do this using <mx:html ... and this works but only after you have clicked on one of the buttons, not on the first load.   Any ideas why??
The source code is :
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" >
<mx:Sequence id="overview_b_sequence" duration="400">
<mx:Resize targets="{[messages,ideas,last_upload,all_comics,upload_comics]}"  widthTo="0" heightTo="0"/>
<mx:Move targets="{[ideas,last_upload,all_comics,upload_comics,messages]}" xTo="320" yTo="270"/>
<mx:Resize targets="{[messages,ideas,last_upload,all_comics,upload_comics]}" duration="100" widthTo="20" heightTo="10"/>
<mx:Pause duration="100" />
<mx:Parallel duration="400" >
<mx:Move target="{messages}" xTo="470.95" yTo="245.1" duration="100" />
<mx:Move target="{ideas}" xTo="470" yTo="38" duration="100" />
<mx:Move target="{last_upload}" xTo="10" yTo="38" duration="100" />
<mx:Move target="{all_comics}" xTo="267.05" yTo="453.1" duration="100" />
<mx:Move target="{upload_comics}" xTo="10" yTo="453.1" duration="100" />
</mx:Parallel>
<mx:Pause duration="100" />
<mx:Parallel duration="400">
<mx:Resize target="{messages}" widthTo="250" heightTo="200"/>
<mx:Resize target="{ideas}" widthTo="250" heightTo="200"/>
<mx:Resize target="{last_upload}" widthTo="452.95" heightTo="407.1"/>
<mx:Resize target="{all_comics}" widthTo="452.95" heightTo="200"/>
<mx:Resize target="{upload_comics}" widthTo="249.05" heightTo="200"/>
</mx:Parallel>
</mx:Sequence>
<mx:Sequence id="messages_b_sequence">
<mx:Resize targets="{[ideas,last_upload,all_comics,upload_comics]}" widthTo="0" heightTo="0"/>
<mx:Move target="{messages}" xTo="10" yTo="38"/>
<mx:Resize target="{messages}" widthTo="710" heightTo="615"/>
</mx:Sequence>
<mx:Sequence id="upload_comics_b_sequence">
<mx:Resize targets="{[ideas,last_upload,all_comics,messages]}" widthTo="0" heightTo="0"/>
<mx:Move target="{upload_comics}" xTo="10" yTo="38"/>
<mx:Resize target="{upload_comics}" widthTo="710" heightTo="615"/>
</mx:Sequence>
<mx:Sequence id="share_ideas_b_sequence">
<mx:Resize targets="{[upload_comics,last_upload,all_comics,messages]}" widthTo="0" heightTo="0"/>
<mx:Move target="{ideas}" xTo="10" yTo="38"/>
<mx:Resize target="{ideas}" widthTo="710" heightTo="615"/>
</mx:Sequence>
<mx:Sequence id="last_upload_b_sequence">
<mx:Resize targets="{[upload_comics,ideas,all_comics,messages]}" widthTo="0" heightTo="0"/>
<mx:Move target="{last_upload}" xTo="10" yTo="38"/>
<mx:Resize target="{last_upload}" widthTo="710" heightTo="615"/>
</mx:Sequence>
<mx:Sequence id="all_comics_b_sequence">
<mx:Resize targets="{[upload_comics,ideas,last_upload,messages]}" widthTo="0" heightTo="0"/>
<mx:Move target="{all_comics}" xTo="10" yTo="38"/>
<mx:Resize target="{all_comics}" widthTo="710" heightTo="615"/>
</mx:Sequence>
<mx:Panel width="750" height="700" layout="absolute" horizontalCenter="0" top="182" backgroundColor="#879DA8">
<mx:Panel x="10" y="38" width="452.95" height="407.1" layout="absolute" title="Last uploaded comic 01" id="last_upload">
</mx:Panel>
<mx:Panel width="250" height="199.1" layout="absolute" fontFamily="verdana" title="Ideas" id="ideas" x="470.95" y="38">
    <mx:HTML id="full" width="100%" height="100%" location="http://www.adobe.com/"  />
    <mx:ViewStack x="0" y="0" id="ideas_vs" width="100%" height="100%">
        <mx:Canvas label="ideafull" width="100%" height="100%" id="ideafull">
        </mx:Canvas>
        <mx:Canvas label="ideasmall" width="100%" height="100%" id="ideasmall">
        <mx:HTML id="main" width="100%" height="100%" location="http://www.google.com/" />
        </mx:Canvas>
</mx:ViewStack>
</mx:Panel>
<mx:Panel x="267.05" y="453.1" width="452.95" height="200" layout="absolute" title="All Comics" id="all_comics">
</mx:Panel>
<mx:ApplicationControlBar width="100%" fillAlphas="[1.0, 1.0]" fillColors="[#234863, #234863]" height="30">
<mx:Button label="Overview" id="overview_button" click="overview_b_sequence.play();  ideas_vs.selectedChild=ideasmall;"/>
<mx:Button label="Messages" id="messages_button"  click="messages_b_sequence.play();"/>
<mx:Button label="Upload Comics" id="upload_comics_button" click="upload_comics_b_sequence.play();"/>
<mx:Button label="All Comics" id="all_comics_b" click="all_comics_b_sequence.play();"/>
<mx:Button label="Share Ideas" id="share_ideas_button" click="share_ideas_b_sequence.play(); ideas_vs.selectedChild=ideafull; "/>
<mx:Button label="Log Out" id="log_out_button"/>
</mx:ApplicationControlBar>
<mx:Panel x="470.95" y="245.1" width="250" height="200" layout="absolute" title="Messages" id="messages" alpha="1.0">
</mx:Panel>
<mx:Panel x="10" y="453.1" width="249.05" height="200" layout="absolute" title="Upload Comics" id="upload_comics">
</mx:Panel>  
</mx:Panel>
<mx:Image y="44" horizontalCenter="0" width="750">
<mx:source>Pics/header.png</mx:source>
</mx:Image>
</mx:WindowedApplication>
I have colourd what i think are the crutial bits, if anyone wants me to post the .air installer then i will gladly.
Any surgestions are welcomed greatfully.
Thanks
TOM

I did not see where you try to set content on load.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Similar Messages

  • I had to put my computer by together without migration or time machine I NEED help with order of the files?

    I had to put my computer by together without migration or time machine I NEED help with order of the files?

    Hi, where are these other files exactly?

  • Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

    Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

    Hello Priyanks,
    I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Please i need help with switch from the us store to malaysian store how i can switch

    Please i need help with switch from the us store to malaysian store how i can switch

    Click here and follow the instructions to change the iTunes Store country.
    (82303)

  • Need help with premiere pro cs6 having performance issues please help

    need help with premiere pro cs6 having performance issues please help

    Welcome to the forum.
    First thing that I would do would be to look at this Adobe KB Article to see if it helps.
    Next, I would try the tips in this ARTICLE.
    If that does not help, a Repair Install would definitely be in order.
    Good luck,
    Hunt

  • Help with loading image in Air

    Hello there, hope you can help me with this situation.  Getting into FlexSDK/AirSDK development.  I am very familiar with Flex development using Flash Builder 4, however, I would like to get into development using the the two(2) SDK development tools mentioned above especially from an AIR development perspective.  Coming along pretty good, and ran into one problem that driving me nuts: I have an image in a folder called AirSamples/Air/HelloWorld/southwest.jpg.     I tried to bind the image to the image tag by issuing the following:
      <mx:Image source="@Embed('AirSamples/Air/HelloWorld/southwest.jpg')" /> in my mxml file (HelloWorld.mxml). Let assume this is the only component tag in the file.
    When I go to the command prompt and issue the command: amxmlc Helloworld.mxml,  it compiles without an error. When I issue adl HelloWorld-app.mxml   from the command line prompt, it loaded in Flash Player, however,  the graphic symbol came up indicating that a graphic was there, but no graphic. Can you offer any suggestions as to how I can make this work even if I have to use ActionScript.
    Jerry McLeod

    I already know how to do that, but I specifically stated in my post that I can't use the Loader class. The reason for that is that my program is an image manipulation program, and I need to load the data into a BitmapData object. However, since I originally made my post, I have found some more information. I used trace() to find out the length of the ByteArray I was loading the data into, and then the position after trying to create the BitmapData object, like so:
    import flash.display.*;
    import flash.events.*;
    import flash.filesytem.*;
    import flash.net.FileFilter;
    import flash.utils.ByteArray;
    import flash.geom.Rectangle;
    import flash.errors.EOFError;
    var file:File = File.documentsDirectory;
    var myImage:BitmapData;
    var myFilter:FileFilter = new FileFilter("GIF Image","*.gif");
    file.addEventListener(Event.SELECT,loadImage);
    file.browseForOpen("Open",[myFilter]);
    function loadImage(e:Event):void{
         var stream:FileStream = new FileStream();
         stream.open(file,FileMode.READ);
         var bytes:ByteArray = new ByteArray();
         stream.readBytes(bytes);
         stream.close();
         trace(bytes.length); //Outputs: 4631
         //By the way, this image is a special format and will always be 160 by 160 pixels.
         myImage = new BitmapData(160,160);
         bytes.position = 0;
         try{
              myImage.setPixels(new Rectangle(0,0,160,160),bytes);
         } catch(e:EOFError){
              trace(bytes.position); //Outputs: 4628
         addChild(new Bitmap(myImage));
    As the comments show, though the ByteArray is 4631 bytes, it is only read up until byte number 4628. Then it throws an error. Any idea what's going on?

  • Combining APEX help with a frame-like TOC html help system (I used DITA)

    Problem:
    The APEX page-oriented help system is bad at helping users find how to do something. I prefer to use a task-oriented help system for that, with a table of contents that users can browse around in. I like the DITA (Darwin Information Typing Architecture) system's topic based help with its ideas of tasks, concepts and references. But, I also like the context-based feel of a page-based help system and the way that the APEX help system automatically aggregates all of the item-based help on a page for you.
    My Solution:
    I'm no html genius, so this may be totally wrong, but what I did was to create a task oriented html user guide that also included a page based help TOC entry for each page. I then used iframes in the APEX help page to allow me to have a TOC always showing with links that controlled a content "pane," but still also display the automatically-generated item help for the page help is called from.
    * Downloaded the DITA open toolkit (http://sourceforge.net/projects/dita-ot ), full package distribution and installed using the user guide (http://dita-ot.sourceforge.net/doc/ot-userguide131/xhtml/ )
    * Downloaded and installed XMLmind XML editor free personal edition version ([http://www.xmlmind.com/xmleditor/download.shtml]). I'm not endorsing this thing, but it's free and it works great out of the box for editing DITA files.
    * Created an html user guide by modifying the garage sample that's included with the DITA open toolkit and publishing to xhtml (I also published to pdf2, by the way, to provide a printable user guide for my users to download...one of the nice things about DITA). I set up my files so that they would all be in a topics subfolder, rather than the standard task, concept, and reference folders of the example. I did this so that I wouldn't have to worry about linking to a different folder from APEX (more on that later). I made a concept topic for each page of my application with the filename "Concept_About_page_X.dita," where X is the APEX page number.
    * I run APEX using Oracle Application Server 10g, so I uploaded the files to a subdirectory of their own in the i/ folder on the OAS server. In my case this was APPSERVER_HOME/apache/apache/images/doc/MyAppHelp/
    * The DITA toolkit generates html pages that look for a CSS called commonltr.css, located at the same level as the index.html file. I copied my APEX theme's CSS file to that same place and renamed it commonltr.css (in my case that was APPSERVER_HOME/apache/apache/images/themes/theme_13/theme_V3.css). Now, the proper thing to do would be to configure DITA to point at the real location of the theme's CSS, I guess. But I didn't want to figure out how to do that at this point.
    * Now, in APEX, I deleted all of the page-level help text from my pages, since I had now duplicated this information into the DITA page concept topics. Instead, on each page I put
    * On the help page (the page that you create when you're first setting up Help in APEX, mine is page 50), I added the following iframe tags in the header text of the page: \\      &lt;iframe src="../../i/doc/gradevalhelp/index.html" width="40%" height="50%" align="left"&gt;&lt;/iframe&gt;&lt;iframe name="contentwin" src="../../i/doc/gradevalhelp/topics/Concept_About_page_&REQUEST..html" width="60%" height="50%" align="right"&gt;&lt;/iframe&gt;&lt;br&gt; \\      Note the &lt;br&gt; at the end. I had to put that in to prevent the item level help from printing over my content iframe. Again, someone who knows something about html could probably tell you the right way to do that. The DITA toolkit generates a base tag (&lt;base target="contentwin"/&gt;) in the head section of the index.html file, to make the target of the TOC links be the content frame. Notice how I use it to map the links in the first iframe to the second iframe on the APEX help page, by naming the second frame "contentwin". Notice how the &REQUEST. Substitution string is used to present the proper DITA html file. I also tried setting it up to use a calculated hidden item that looks up the page alias for the requesting page; this had the advantage of allowing me to name my DITA files using page alias instead of page number, but it was too slow.

    Look at all the apdiv's you have.  Those are absolutely positioned layers.  I'm assuming by your post that you are very new to Dreamweaver and HTML and CSS.  I would highly recommend not using absolutely positioned layers until you have a better grasp on HTML and CSS.
    Looking at your code I would suggest that you consider using one of Dreamweaver's built in, or downloadable templates as a starting point and work from there. 
    http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html

  • Help getting help with iTunes (or, the elusive product registration number)

    My almost brand-new iPOD classic is now useless because iTunes no longer works on my Vista 64. It was fine for a while. Now, when my computer starts up, I get an error message that reads:
    iTunes was not installed correctly. Please reinstall iTunes Error 7 (Windows error 14003).
    I tried all the obvious stuff, and then decided, what the heck, I'm a paying customer, I'll get some online help for Apple. But much to my frustration and rage, I can't get any help without my product registration number. I can't read the microscopic number on the back of my iPod, and because i can't open iTunes, I can't find my registration number that way. Do you know, you can't even call Apple without the product registration number? So I can't get any help. I'm so frustrated. I got my iPod on Airmiles, so I don't even have a bill.
    Is there any other way to find my registration number?

    hi dan,
    i am using iWeb for a non .Mac account! the reason behind is that external hosters offer better online space and loading times than .Mac. Yet on the other hand, the iDisk, Web-Mail, Addressbook and iCal features that are offered with .Mac make the 99€ a year quite worthy!
    i myself do not use .mac because my website is simply to large and the prices are not accepteable that .Mac offers for more space!
    the next thing is that your .Mac account username will be in you URL and you cannot stay anonymous! your address will be something like this:
    http://web.mac.com/USERNAME
    so now you will share your username with the whole wide world! the other thing is that iWeb was designed to work hand in hand with .Mac. This means that some cool feature fall off when you publish externally, meaning to a different host, eg.: 1and1, godaddy, strato. These features include Slideshows, Password-Protection, Blod-Search and other small things!
    yet when you still choose to go for .Mac - no one will get your address unless you tell them what the address is! it is extremely hard to find, if not impossible, your .mac address under Google or Yahoo! So your username is somewhat protected!
    Here are some good hosters:
    http://godaddy.com
    http://1and1.com
    http://strato.de (german)
    you practically have to also see for your country what hosters offer. 1and1 is extremely cheap and is over the world! Yet when you choose to have a external host - then you have to pay extra and if you close your .Mac account you cannot buy music in the itunes store!
    here is a very good FTP program to upload your files to a different host:
    http://cyberduck.ch
    http://karreth.com/iweb/Host%20To%20Other%20Than%20.Mac.html
    i hope that helped!
    max

  • Please help with any or all: FTP, HTML, .Mac unpub'ing

    Dear Helpers,
    I too, build my site with iWeb and published to Mac, only to discover that the site was not "built in HTML" so I could not get help with SEO later on. (Then I read a Varrkgirl entry that seems to say that indeed once published, the site does contain HTML code. I am a novice and I don't "see" the code on my published pages..what do I know?) I was told "rebuild your site in HTML", transfer to new host via FTP.
    Sooo, I had someone look at the site, put in the HTML code, and then he gave it to me on a disk which I can load onto my computer. I have been told to publish to a new host, via FTP Cyberduck (I see there's a tutorial for that here too) and unpublish my .Mac one. Don't know what in what order to do this.
    I need help prioritzing tasks please. and to know if there is an easier way perhaps or if this should/could be avoided. Ultimately, I want a site in HTML code on my published site so that I can get some SEO help with later on. When I published to a folder, I do see code but if I simply upload this to another host would that take care of the whole issue? (i.e. dump the disk my person worked on, etc.)
    re: HTML (could I have done this myself with Text Edit? If so, then is there a way to do so at this point, since my site is published to .Mac presently?) If I want to build/change current pages in the future using iWeb I want to know how, and then how to move changes to a new host.
    re: Unpublishing my site at .Mac (when? it would seem like before I use FTP but if for some reason FTP'ing does not work then I am without my site, right?)
    re:my laundry (really out of hand since beginnng this process of totally ignoring one's life for the web..)
    Sincere thanks

    HTML:
    iWeb pages certainly ARE html code. You just don't edit the code in iWeb. If you need to add some code afterwards, try this:
    http://www.varkgirl.com/Varkgirl/Basic%20HTML%20Additions.html
    SEO:
    http://www.varkgirl.com/Varkgirl/Google%20and%20iWeb.html
    Basic iWeb FAQ:
    http://www.varkgirl.com/iWebFAQ

  • Please help with Load Variables / ASP

    Hello,
    I am using Load Variables to retreive a variable from an ASP
    page, (which uses a response.write) to output the variable
    getfile.onRelease = function()
    myData = new LoadVars();
    myData.onLoad = function(success){
    if(success) {
    getfile_txt.text = this.strString;
    } else {
    getfile_txt.text = "error";
    myData.load("sendFile.asp");
    stop();
    the problem is that the output says "undefined", but when I
    access the .asp page through my web browser I get the expected
    result of the variable which is "Test1.Doc"
    if any1 can help with this, i would be massivley thankful,
    thanks.

    p.s strString is the variable that I am trying to pass from
    the ASP page.

  • Help with loading multiple images via LoadVars

    Hello everybody.
    I need a hand loading multiple images using the LoadVars
    method with a text file. I can get it to load 1 image but not
    anymore than that. I am aware of other methods like using
    components but I am looking for a method where I can access and
    change all data from 1 text file (there will be text variable text
    within the file aswell to, but I am more concerned with the images
    at the moment).
    Anyway on to the issue. I have created a much simple .fla
    file that outlines my problem.
    The movie contains 3 layers:
    - top layer contains AS
    - middle layer contains an empty movie clip with the
    instance name of mcImage1
    - bottom layer contains an empy movie clip with the instance
    name of mcImage2
    The AS layer contains the following code:
    imagedata = new LoadVars()
    imagedata.load("data.txt")
    imagedata.onLoad = function(ok){
    if(ok){
    mcImage1.loadMovie(this.Image1)
    mcImage2.loadMovie(this.Image2)
    } else trace("Problem Loading")
    In the same folder of my .swf file I have a text file called
    data.txt which contains the following
    &Image1=image1.gif
    &Image2=image2.gif
    Also in the same folder of my .swf file I have two images
    image1.gif and image2.gif.
    When I run the flash the image2.gif is imported correctly.
    image1.gif does not appear.
    You can download my source files and all images here
    http://www.myrealpage.com/projects/var_test/var_test.zip
    Any help that can be shed on this problem is much
    appreciated.
    Thanks
    Matt

    Glad to help. It is just that I see so many folks who have
    two different parts of a problem smushed together – each
    problem isn't so hard on its own, but together they are difficult
    to wrap your head around. Always try and break down each step of
    the problem and it will help you in the end.
    That being said, I'm not quite so sure on this next problem.
    I don't do so much timeline stuff along with the Actionscript. I
    can get tricky. So this I don't quite have as much of clear mental
    picture of what you are describing. But here are some questions
    that I would ask – either of myself if I was doing it or of
    you.
    Is there a stop() on frame one to wait for the
    LoadVars.onLoad? Does the onLoad then say to play?
    If not, what happens if we get to Frame 10 before the
    LoadVars has even finished? That could be a problem.
    Remember that the LoadVars object is an actual object that
    will exist until it is deleted or removed in various ways. You can
    access it at any time after it is loaded. The onLoad event handler
    is just that thing you want to happen immediately after it is
    loaded.
    So my design would probably be.
    LoadVars on Frame 1.
    Where I am stopped.
    In the onLoad handler load the first image and tell the
    timeline to play
    On frame 10, the LoadVars object will still exist (unless
    you've deleted it)
    Get the variable out of the LoadVars and load the image.
    If you want to check this. Put a stop() in frame 10 and run
    it in the testing environment. When it gets to that frame, go to
    the debug menu and List Variables. You should see that your
    LoadVars object is still there.
    Does that answer your question or am I totally missing the
    point?

  • Help with loading External SWFs

    Hi:
    I need to load external swfs into a mc. They will play in
    sequence, as soon as one ends, the next one will start. When
    running it blows by the first external swf (start.swf) and the rest
    of the external swfs will not continue to load and play after the
    objectives.swf. Could someone take a look at my code and tell me
    what I’m doing wrong?
    I’ve created controls that will allow me to play, pause
    and stop the external swfs while they’re playing (however,
    these buttons do not seem to have any effect on the external swf
    when it is playing). I think it is a scope issue, but I am not
    sure.
    Also, there’s a combo box at the bottom, which allows
    the user to jump to any external swf (it actually jumps to certain
    labels on the main timeline) at any time. The combo box appears to
    work OK.
    The FLA is located at:
    www.digitalhorizonstudios.com/exstream/newplayer.fla
    By the way, this presentation is a fullscreen .exe file when
    in use, not a swf played in an html file.
    Thanks SO MUCH for any help on this one.

    Please try this line of script:
    var myLoader:Loader = new Loader(); //create the varaible for the loader
    var myURL:URLRequest = new URLRequest("A.swf");// create the variable for the swf to be loaded
    myLoader.load(myURL)
    addChild(myLoader);

  • Help with form sending the data to email

    I have looked all over the Internet for help with this.  I have tried numerous video tutorials and for some reason I can't get it to work.  I have created a form in flash cs4 AS2.  It is a contact information form where the user fills out their information and sends it.  I have created a the form in a movie clip (I have also tried it not in a movie clip) with the form components inside that movie clip.  I have given each component on the form an instance name.
    The form has:
    Full name (with instance name=name)
    Company (with IN =company)
    Title (with IN = title)
    Phone (with IN = phone)
    Email (with IN = email)
    Topic combobox (with IN=topic)
    Message box (with IN=msg)
    Submit button (with IN=submit)
    I need help with the actionscript writing.  I am VERY new to flash and have never done any scripting really.  Does anyone have a sample file I can look at to see how it works or can someone IM me and I can send my file for them to help me?
    My IM is logan3975
    Any help is greatly appreciated.  I consider myself a pretty technical person so I do learn quick...I just need some guidance until I wrap my head around how this all works.  Thanks.

    Here's a link to a posting elsewhere some had had that may provide some useful info (?)
    http://board.flashkit.com/board/showthread.php?t=684031

  • Need help with loading child .swf into parent .swf

    Hello,
    I am having trouble with an external .swf that isbeing loaded
    into the master.swf. All of the files loads perfectly. However the
    .swf that has the contact form movieclip in it will not work. The
    combobox does that display any of the items listed and the form is
    not being sent to the server. Can anyone give me a hand with
    this?

    can you post your code

  • Need help with loading Windows 7 onto Macbook Pro - Bootcamp and parallels

    Hi,
    I have a windows PC and changing over to a Mac. I purchased today Parallels and Microsoft Office for Mac in order to use them on the MacBook.
    Also please note - I need to use Bootcamp for some programs that I need to use - and then also be able to use parallels.
    Where I am up to at the moment is - since there is no disc drive on the laptop where I can insert the disc - I have gone onto my PC and downloaded the Windows 7  usb/dvd download tool setup - however I dont know where I find the ISO file for Windows 7? So if someone could help me with that.
    Alternatively - can someone please let me know if I can just pay and download Window 7 for Mac - and then run it through boot camp etc. If someone can please give me some advice on this - and also a handy step by step guide on how to achieve it.
    Thank you so much in advance for your help!!!! I really appreciate it!
    K

    Thanks Clinton  - When I went into Apple store today, I told him about the programs my husband needs to use for a CBUS course. The guy there said his room mate has done the same thing and cannot use parallels for the programs they need to run (it doesnt seem to work properly) so he is using boot camp to run them and it works fine. So I am wanting to run Boot camp first and then once the course is finished run everything through parallels. 
    So I have gone into Boot Camp - and because there is no Disc drive I cannot insert the disc - so I have gone back onto the PC to put windows onto a USB to then use with Bootcamp. I just cannot find the ISO file path for Windows.
    I hope this all makes sense!
    I am thinking I maybe i will buy the windows ISO file instead of trying to hunt it down on the PC. Do you think this is the best way to do it?

Maybe you are looking for