Help with QOS rules while using Actiontec router as a bridge

In my family's house I have a Verizon Actiontec MI424-WR Rev F currently acting as strictly a modem with WiFi turned off. I connected a Netgear N600 from its LAN port to the Actiontec's LAN port and that is acting as my wireless network. I did this because it is a 2-story house and the Netgear offered better WiFi coverage throughout the house than the Actiontec. The Actiontec router has its 192.168.1.1 ip address and the netgear has a 192.168.1.2 ip address and neither one has anything plugged into its WAN port. Everything (laptops, Xbox, cellphones, etc.) was working well until I recently purchased a new home theatre receiver. The receiver has network capability so I purchased a few Netgear Powerline 500 nanos. I have a total of 4 of the "powerline plugins", The first one, the hub, I have plugged directly into the Actiontec router and the other three I'm using for the Xbox, the receiver, and a WDTV live smart box. I got them all working but I've noticed WiFi speeds on the laptops have dropped and the netgear plugin I have alotted for the Xbox is going slower than the other two plugins that really don't require that much internet usage. The main home PC is directly connected to a LAN port on the actiontec router so I turned off the Netgear N600 and ran a speed test with no interference. I got results of 58.99 Download and 39.03 Upload. So what I want to know is if my setup I'm using currently okay or do I need to change some settings on the Actiontec to make it a "true bridge" rather than more of a modem? And if my setup is okay will QOS rules in place (with assigned Static IP's) help to make things more efficient? If that's the case how do I set QOS rules on the actiontec that fit my needs? I appreciate any help anyone can give me!
So to sum up:
1. Actiontec MI424WR Rev F has a router plugged into its LAN port from the LAN port of a....
2. Netgear N600 router which is being used as main router/WiFi. Have a total of...
3. 4 Netgear Powerline 500's throughout the house with the main Hub plugged into a LAN port on the Actiontec.
All have reception but with major efficiency issues. WiFi has also slowed due to this.
Thanks again!

olly230 wrote:
on a similar note.
My brother has BT internet and has the 2 generations of router White hub aned black hub.
He has thick stone walls and would liek to know if he can use his old white hub as well to expand the avaliable ammount of wifi ness
this might help but not if HH2 http://www.jarviser.co.uk/jarviser/hubasdongle.html
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Problem with Progress DB while using to connect using JDBC Adapter

Hi,
I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like,
Error during database connection to the database URL jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db using the JDBC driver "com.progress.sql.jdbc.JdbcProgressDriver" : com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL " jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db "
I tried using the following all URLs,
1. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.
2. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.db
3.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.
4.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db.
Can anyone please help me out in solving this issue.
May be the cause for this is :
1) The Wrong URL format
2) CLASSPATH is not setted properly..
Can you look more into this stuff.
Thanks,
Soorya.

Hi,
To access any database fromm XI, using the JDBC adapter, the corresponding drivers have to be installed on the XI server.
Just check this note 831162.
Also, check this PDF to install Drivers in XI,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

Send a mail with change history while changing the Routing (T-Code CA02),

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Help with Audio Playback While Recording

I am an aspiring sound engineer and I am having a problem with recording in Audition 3.0 that I need help with. When i record vocals, the sound wave plays back in the speakers/headphones with like a 1.5 second delay after it is recorded. It really throws off the artists I am working with when they are trying to record vocals. How do i kill headphone/speaker playback while someone is recording?

There are problems with a lot of internal soundcards in a lot of laptops, and these seem to be so many and various that all you can do is use trial and error and hope for the best.
External soundcards should cure any problem, but you may have to look into what else is running on the laptop, as so much is integrated, and some machines seem to have audio problems caused by wireless or other network adaptors etc.
As I said, I use oldish Edirol and Tascam usb units. The Tascam has a known fault (noise when using a guitar channel at the same time as phantom powering a mic on the other channel) which I can live with, and I would hope has been solved in later and current versions. The Edirol is fine. I use 2 units to give me the connections I want (ie one has jacks, the other phono plugs, and different size headphone sockets). Both these have asio and wdm drivers and work fine with AA 3.0 here. More modern devices will be usb2 and will presumably provide more channels or higher sampling rates, but these are fine. Others will be more up to date than me, but I would think anything from Tascam, Edirol, Echo Audio and I think most m-audio models should be fine. Just be wary of anything from Creative Labs. I, too, have had bad experiences with one of their products (it drew too much current from the usb port on a couple of the laptops so I never got as far as to find whether it had asio drivers working or not). But others will be more up to date than I am.
I just went onto ebay over the years and kept bidding on sensible looking devices until I got ones at the right price, but it probably is better to buy new if you can afford it.
Sorry I can't give a more definite answer.

Help with CSS rule cross platform browser compatibility

I am an advanced beginner website designer.
The website I need help with is www.sprungtheatre.com
I designed this site on a PC machine. Each page has a
different CSS Background Image rule. The only rule I have set is
image and the "non-repeat." I have not set rules for its placement.
Each of these images had a feather effect applied to it in
Illustrator so the image would fade into the black background. This
works fine on Windows machines in IE and Firefox.
However, on Macs, the left-hand side of the image is chopped
off. Which is to say, it appears if the feathered edge has been cut
off and the image ends abruptly.
Is there any way to fix this problem?
My only guess is that the following my be happening:
The CSS Background Image rule is applied to a nested table
that is editable in a template. I'm thinking that the Mac browswers
are moving the image to the upper left of the overall, "poppa"
table in which the editable region is nested, cutting off that part
of the image that appears in the non-editable region of the "poppa"
table and showing that part of it that appears in the nested,
editable table. I hope that makes sense. Would applying the
placement rules help this? If not, what might?
Many thanks,
Jon

Don't use a fixed background image.
Sorry to break the news but the code is hidous for an
advanced beginner.
Youre sure to run into much trouble unless you are preapred
to take
some time out and learn this stuff correctly.
Using layout mode and spliting and merging tables into all
sorts of
shapes is a seriously bad method and one you should quickly
move away
from for the sake of your own sanity.
zaphron wrote:
> I am an advanced beginner website designer.
>
> The website I need help with is www.sprungtheatre.com
>
> I designed this site on a PC machine. Each page has a
different CSS Background
> Image rule. The only rule I have set is image and the
"non-repeat." I have not
> set rules for its placement.
>
> Each of these images had a feather effect applied to it
in Illustrator so the
> image would fade into the black background. This works
fine on Windows machines
> in IE and Firefox.
>
> However, on Macs, the left-hand side of the image is
chopped off. Which is to
> say, it appears if the feathered edge has been cut off
and the image ends
> abruptly.
>
> Is there any way to fix this problem?
>
> My only guess is that the following my be happening:
>
> The CSS Background Image rule is applied to a nested
table that is editable in
> a template. I'm thinking that the Mac browswers are
moving the image to the
> upper left of the overall, "poppa" table in which the
editable region is
> nested, cutting off that part of the image that appears
in the non-editable
> region of the "poppa" table and showing that part of it
that appears in the
> nested, editable table. I hope that makes sense. Would
applying the placement
> rules help this? If not, what might?
>
> Many thanks,
>
> Jon
>
>
>

Help with QoS basic configuration.

Hi all, i want to configure qos in a cisco lan with non cisco phone. I read a lot of documentation and some basic videos. I don't want to configure it very granular, so, the most basic commands that i found:
conf t
int fa0/5
switchport voice vlan 111
mls qos trust cos
auto qos voip trust
How i'm be realy sure that QoS is working on mi lan?
And how about the interface trunk configuration?
Any suggestion?
Here are the verification:
In the show running-configuration :
mls qos map cos-dscp 0 8 16 24 32 46 48 56
mls qos srr-queue input bandwidth 70 30
mls qos srr-queue input threshold 1 80 90
mls qos srr-queue input priority-queue 2 bandwidth 30
mls qos srr-queue input cos-map queue 1 threshold 2 3
mls qos srr-queue input cos-map queue 1 threshold 3 6 7
mls qos srr-queue input cos-map queue 2 threshold 1 4
mls qos srr-queue input dscp-map queue 1 threshold 2 24
mls qos srr-queue input dscp-map queue 1 threshold 3 48 49 50 51 52 53 54 55
mls qos srr-queue input dscp-map queue 1 threshold 3 56 57 58 59 60 61 62 63
mls qos srr-queue input dscp-map queue 2 threshold 3 32 33 40 41 42 43 44 45
mls qos srr-queue input dscp-map queue 2 threshold 3 46 47
mls qos srr-queue output cos-map queue 1 threshold 3 4 5
mls qos srr-queue output cos-map queue 2 threshold 1 2
mls qos srr-queue output cos-map queue 2 threshold 2 3
mls qos srr-queue output cos-map queue 2 threshold 3 6 7
mls qos srr-queue output cos-map queue 3 threshold 3 0
mls qos srr-queue output cos-map queue 4 threshold 3 1
mls qos srr-queue output dscp-map queue 1 threshold 3 32 33 40 41 42 43 44 45
mls qos srr-queue output dscp-map queue 1 threshold 3 46 47
mls qos srr-queue output dscp-map queue 2 threshold 1 16 17 18 19 20 21 22 23
mls qos srr-queue output dscp-map queue 2 threshold 1 26 27 28 29 30 31 34 35
mls qos srr-queue output dscp-map queue 2 threshold 1 36 37 38 39
mls qos srr-queue output dscp-map queue 2 threshold 2 24
mls qos srr-queue output dscp-map queue 2 threshold 3 48 49 50 51 52 53 54 55
mls qos srr-queue output dscp-map queue 2 threshold 3 56 57 58 59 60 61 62 63
mls qos srr-queue output dscp-map queue 3 threshold 3 0 1 2 3 4 5 6 7
mls qos srr-queue output dscp-map queue 4 threshold 1 8 9 11 13 15
mls qos srr-queue output dscp-map queue 4 threshold 2 10 12 14
mls qos queue-set output 1 threshold 1 100 100 50 200
mls qos queue-set output 1 threshold 2 125 125 100 400
mls qos queue-set output 1 threshold 3 100 100 100 400
mls qos queue-set output 1 threshold 4 60 150 50 200
mls qos queue-set output 1 buffers 15 25 40 20
mls qos
In the interface configuration:
interface FastEthernet0/5
switchport access vlan 111
switchport mode access
switchport voice vlan 111
srr-queue bandwidth share 1 30 35 5
priority-queue out
mls qos trust cos
auto qos trust
spanning-tree portfast
In trunk port:
interface GigabitEthernet0/1
switchport mode trunk
sh mls qos int f0/5
FastEthernet0/5
trust state: trust cos
trust mode: trust cos
trust enabled flag: ena
COS override: dis
default COS: 0
DSCP Mutation Map: Default DSCP Mutation Map
Trust device: none
qos mode: port-based
Thanks a lot !
Martín.

Hi, thanks for reply. I investigate a little more.
When i want verify that QoS really work in the lan, first of all:
- The marking (in my case verify traffic VoIP at 64)
- Queue, that put first in the queue voice traffic, dscp 64
To try, i make a call connecting an IP phone (in fa0/6) and call to analog phone. Wait for 2 minutes and see what changes in this command:
Switch#sh mls qos int f0/6 stFastEthernet0/6 (All statistics are in packets) dscp: incoming------------------------------- 0 - 4 : 4465744658 0 0 0 0 5 - 9 : 0 0 0 0 0 10 - 14 : 0 0 0 0 0 15 - 19 : 0 0 0 0 0 20 - 24 : 0 0 0 0 0 25 - 29 : 0 1196 0 0 0 30 - 34 : 0 0 0 0 0 35 - 39 : 0 0 0 0 0 40 - 44 : 0 0 0 0 0 45 - 49 : 0 41769 62163 0 91 98 0 50 - 54 : 0 0 0 0 0 55 - 59 : 0 0 0 0 0 60 - 64 : 0 0 0 0 dscp: outgoing------------------------------- 0 - 4 : 251670 272323 0 0 0 0 5 - 9 : 0 0 0 0 0 10 - 14 : 0 0 0 0 0 15 - 19 : 0 0 0 0 0 20 - 24 : 0 0 0 0 0 25 - 29 : 0 0 0 0 0 30 - 34 : 0 0 0 0 0 35 - 39 : 0 0 0 0 0 40 - 44 : 0 0 0 0 0 45 - 49 : 0 3393 0 0 0 50 - 54 : 0 0 0 0 0 55 - 59 : 0 0 0 0 0 60 - 64 : 0 0 0 0 cos: incoming------------------------------- 0 - 4 : 89094 109541 0 0 0 0 5 - 7 : 0 0 0 cos: outgoing------------------------------- 0 - 4 : 295699 316387 0 0 0 0 5 - 7 : 3393 0 0 output queues enqueued: queue: threshold1 threshold2 threshold3----------------------------------------------- queue 0: 2 0 0 queue 1: 209108 1534 194272 queue 2: 0 0 56565 queue 3: 0 0 33762 output queues dropped: queue: threshold1 threshold2 threshold3----------------------------------------------- queue 0: 0 0 0 queue 1: 57 0 0 queue 2: 0 0 0 queue 3: 0 0 0Policer: Inprofile: 0 OutofProfile: 0
The underlined numbers is the variations in aprox. 2 minutes in the call. That mean that the traffic was marked as VoIP traffic, but i´m not sure that the traffic is queued right.
I´m wrong?
Thanks for the help
PS:Later monitoring: with iperf or Cacti using IP SLA.

Help with Video Performance Issues using Flash

Asking on behalf of a customer who has been unable to get any answers so far - are you able to help?
Background:
We have a port of our Game Development Kit which allows us to recompile all our games using Crossbridge (http://adobe-flash.github.io/crossbridge/) into SWF without any code modifications.
Overview:
Our framework is using OpenGL for rendering and we have successfully ported it along with the audio and video to run in Flash.
We are experiencing performance issues using Video. We cannot use image sequence as some of the video animations are too long and would increase the download to an unacceptable size. Assets vary between 256x256 - 1024x1024 videos.

Here's the rest of the story. Let me know if you can see any resolution, and I will connect him to the forums. Thank you.
Current Video Solution:
We create an instance of NetConnection, NetStream, and Video according to most samples out there, and invoke draw to rasterize the Video DisplayObject into a BitmapData instance.
The BitmapData instance has a fixed color component layout which is not compatible with Stage3D texture and is therefore has to be reformatted before uploaded to Stage3D Texture (See Code Listing below).
Our Problems:
Performance issues with RGBA conversion (either using copyChannel or manually reformatting is not fast enough) natively in as3; this required for stage3d texture.Copying each channel individual using bitmapdata.Copychannel seems faster, but not significantly faster.
Cannot detect when video frame has been updated, therefore we may copy pixels that are not needed in enterframe (processpixel).
Looping video, our current solution uses the NET_STATUS event Buffer empty; Is there a better way to loop videos than checking buffer and seeking to 0.
Stepping video, loading FLV or MP4 side by side assets from HTTP or embedded does not support stepping? Is there another way?
ActionScript Code Listing:
video_nc = new NetConnection();
video_nc.addEventListener(NetStatusEvent.NET_STATUS , onConnect);
video_nc.addEventListener(AsyncErrorEvent.ASYNC_ERROR , trace);
video_nc.connect(null);
// OnConnect Event:
this.ns = new NetStream(e.target as NetConnection);
eventclient = new Object();
eventclient.onMetaData = onMetaData;
this.ns.client = eventclient;
ns.play(flvfile);
ns.pause();
//onMetaData event:
this.width = infoObject.width;
this.height = infoObject.height;
this.textureWidth = NextPowerOfTwo(this.width);
this.textureHeight = NextPowerOfTwo(this.height);
cliprect = new Rectangle(0, 0, this.width ,this.height);
cliprect.x = 0;
cliprect.y = 0;
cliprect.width = this.textureWidth;
cliprect.height = this.textureHeight;
totalFrames = infoObject.duration * infoObject.fps;
this.hasAlpha = true;
if(infoObject.videocodecid == 5)
this.hasAlpha = true;
this.bitmapData = new BitmapData(this.textureWidth, this.textureHeight, hasAlpha, 0xff000000);
this.video = new Video(this.width, this.height);
this.video.attachNetStream(ns);
this.video.addEventListener(Event.ENTER_FRAME, processPixels);
// processPixel method:
BitmapData.draw(video);
GLAPI.instance.glBindTexture(GLAPI.GL_TEXTURE_2D,this.textureId);
var fmt:uint = GLAPI.GL_ARGB;
// converting pixels using copychannel or loop through pixels
GLAPI.instance.glBindTexture(GLAPI.GL_TEXTURE_2D,this.textureId);
GLAPI.instance.glTexImage2D(GLAPI.GL_TEXTURE_2D, 0, fmt, this.textureWidth, this.textureHeight, 0,fmt, GLAPI.GL_UNSIGNED_BYTE, 0, convBitmapData.getPixels(cliprect));

Please help with error message while trying to update i tunes

Errors occurred while installing the updates, if the problem persists, choose tools, download only and installing manually

When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
... that's an unusual one.
could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
hudgie: Taking screenshots to help with problems

Need help with QoS for WRT610N

My previous router was DIR-855 and I had opted for automatic option under QoS.
I changed the router in favour of WRT610N since DIR-855 never worked with SIP ALG enabled. I am happy WRT610N works with SIP ALG enabled.
On my one box I do lots of streaming media and I want to assign priority to this box. I also want to assign priority to my Gigaset S685IP phone as well.
I am told QoS works for upstream and not for downstream. Is this correct?
Can you please enlighten me how I set up QoS for one of my computers and IP phone?
Does WRT610N have the possibility to handle QoS automatically? If so, how I can tell it to do so?

Under QoS,you can set the Internet bandwidth priority for a variety of applications and devices. There are four levels priority: High, Medium, Normal, or Low. When you set priority, do not set all applications to High, because this will defeat the purpose of allocating the available bandwidth. If you want to select below normal bandwidth, select Low. Depending on the application, a few attempts may be needed to set the appropriate bandwidth priority.
There are four categories available...like... Applications, Online Games, MAC Address, Ethernet Port, or Voice Device.So you can setup the priority for X-Box and Voice device.

Is there a way to combine the bookmarks from Internet Explorer with bookmarks added while using Firefox?

I have a bookmark file on the toolbar called "From Internet Explorer." I have also added bookmarks while using Firefox. Is there a way to combine these lists?

This link shows how - https://support.mozilla.com/kb/Importing+favorites+and+other+data+from+Internet+Explorer

Please help! iPad locked while using it with Apple TV

If anyone can help me, I'd really appreciate it!
For some reason, my mom's iPad (first generation) is having an issue with the password. My mom uses her iPad daily, so she certainly didn't forget her 4 digit password, and yet, we can't unlock the iPad. We've tried so many times that we are currently locked out for an hour.
I have no idea if the following is the reason that the password no longer works, but I might as well descibe what I was doing that may have caused it to stop working.
I bought a new soundsystem for my mom's television. We also have an Apple TV hooked up to the TV. I was testing out the sound system by trying to Netflix from Apple TV through the new sound system. In what I imagine to be a totally unrelated problem, the sound system wasn't working with the Apple TV unless the sound system is connected directly to Apple TV (via optical cable).
Anyways, in the midst of trying to figure all of this out, I was using my mom's iPad to control the Apple TV (as opposed to using the remote control that comes with the Apple TV). I was having no issues using the gestures on the iPad to control the Apple TV. Then, after so many minutes of the iPad being idle, I re-awakened the iPad to see that I needed to input the 4 digit password. I asked my mom for her password, tried several times, and it didn't work. Then I had my mom try herself, and the 4 digit pw didn't work. We had to wait several minutes before trying again. We're now at the point where we're having to wait 60 minutes to try an input the 4 digit pw again.
I'm wondering if there was something happening with the Apple TV that caused the iPad to mess up somehow? Any ideas?!?
I'm very confused right now. I would hate to have to restore my mom's iPad and have her lose the hundreds of pictures that she saved on there.
I connected my mom's iPad to my Mac (she doesn't have her own computer) to see if that would work, but my Mac is saying that my mom's iPad is locked.
I can't remember the last time we synced my mom's iPad to any computer. It's possible that the last time it was synced was with my old Mac Mini that I haven't used since December. Would connecting it to my old Mac Mini yield potentially helpful results??

I suggest that in addition to waiting out the 60 minute period, try resetting the iPad. (Do both.)
Reset it by holding the on/off and home buttons together for about 10 seconds till the Apple logo appears.

Trouble with sampling color while using paint tool... help!

The other day, Photoshops started acting a little funny. Specifically, when using the paint tool, I'll hit option (alt) to sample a color to the foreground but it is sampling to the background instead. I have tried to reset all tools and no dice. Does anybody know how i can reverse this? it is screwing up my whole blending procress.

With the paint brush selected, go to the Color panel, and click on the foreground colour so it has a feint white line around it.

Help with QOS rules while using Actiontec router as a bridge

Similar Messages

Maybe you are looking for