Help with saving edited picture

Im using photoshop CS3 on Vista, now Im trying to remove the background from a picture using the filter, extract method, I did that correctly and can now move the picture around over the gray and white tranparency backdrop. My problem is trying to save the picture without a background. Every time i save it as a JPEG the white background returns,
Im trying to upload the picture to a webpage without a background, so it matches the webpage's background, and doesnt have the white background it originally had.
Can someone please assist me with this task.
Thanks for reading

An image has a distinct background, for instance
#1A2B3C hexadecimal. The image is compressed as
JPEG and then placed in a HTML table cell with
exactly the same background color #1A2B3C.
No - the colors don't match.
JPEG compression modifies all colors a little,
but the table cell background is accurate.
Therefore it's recommended to fill the HTML table
cell by a repeated JPEG image, for instance 16x16
pixels (not less), with exactly the original color
#1A2B3C and using exactly the same settings for
the compression.
That's the only method for creating matching back-
grounds, IMHO.
Best regards --Gernot Hoffmann

Similar Messages

  • Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.

    Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?

    W dniu 2013-06-16 15:36, dj_paige pisze:
    >
    Yes, I did it long ago.

  • I need help with Cool Edit 2000

    I need help with Cool Edit 2000. Can someone help me?

    Message edited by moderator: maybe don't publicly post your serial?
    Quite! Never a good idea, even with really old software...
    jackm36094786 wrote:
    Steve: What I have is a Serial # (?) xxx ID # 105368761 and a case # 3009176.I also have the program on my Gateway computer but I don't know how to use it.  Is this of any assistance?
    The program software should install fine (others report using it successfully) but the difficulty has always been registering it. To do this you need to find a program (that often people discard, unfortunately) called ce2kreg.exe and run that. That's where you enter your registration details, and how you get rid of all the noises that CE2000 will put all over your audio otherwise (unless you severely restrict the facilities you can use).
    It used to be the case that if you'd lost the registration program but had the serial numbers, that Adobe would send you a copy of ce2kreg.exe, but somehow I doubt that they'd be willing to do this any more - it was a long time ago now, after all.

  • Help with multiclip editing in FCP

    Can someone please help me with multiclip editing. I have followed all the steps in the tutorials I have watched but I am unalble to switch between the two angles in the time line. Also the red line in the time line is telling me to render everything first . Is that normal or is it because I am using the 5.0 version of FCP?

    To switch between angles, the timeline should not be rendered. Once you render it, it may play more smoothly, but you can't switch.
    Also, sometimes you may have trouble switching many HD files, so it might work better to use Media Manager to make lower resolution proxies for your editing, then bringing the full-res files back for your final output. If the computer can't handle the load, it may refuse to do multiclip editing.
    Finally, you may need to switch Playhead Sync back to "Open" from time to time. For some reason, the Viewer sometimes switches to "Sync Off".
    By the way, your question actually belongs on the Final Cut Studio forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io

  • Need help with saving data and keeping table history for one BP

    Hi all
    I need help with this one ,
    Scenario:
    When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
    So i need to know how to have SBO fullfil this requirement ?
    Hope it's clear .
    Thanks
    Bongani

    Hi
    I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
    I'm using South African localization.
    Thanks

  • Help with Saving & Exporting Files.

    Ok, so I've gone on these forums and on google trying to find a solution to this.
    But none of the solutions they had given worked...And frankly making my own is easier to find. XD
    But anyways.
    I just got Adobe Illustrator CS3 today.
    It is the portable version; I don't know if tthat would make a difference since the options are still available.
    But when I try to save the image, it doesn't matter what I try to save the file as, it says an error occured and it couldn't save the file.
    And now I'm trying to export it into Photoshop CS4 (Also Portable but again, all of the options are available.) so I can color it. (Its a inked drawing of a previously lead drawing.)
    When I try to export it; I get a message saying I do not have enough memory to save the file. Which I have a tetrabyte hardrive that isn't even nearly full.
    What's going on with saving and exporting???
    And I've read about people copying and pasting the different layers into Photoshop, if thats what I have to do, thats OK...But could someone please explain to me how I can do that?
    Thank you. :]

    No kidding and thi character is on the forum asking for help?
    BTW when you install this cracked version be aware that these very beneficent care takers of the public rights have also probably installed spyware on your computer.
    Also errors etc. are expected and there is no cure except to contact those you got the sold you this stuff  and even if it is free once you do they will find a way to use the spyware.
    Enjoy it.
    To the forum host remove this thread fro the forum.

  • Help with saving FarmVille game data...

    Ok, I need a bit of help...
    I have an issue with saving data from a facebook game, FarmVille.
    On my old computer which was running Windows XP when playing FarmVille the game only ever used to reload when it was updated. If I quit the game then went back in and it appeared to be loading the content from some saved data as it would load straight away compared with the 5 minutes it took when ever the game was updated.
    I have now bought a new computer running Windows 7 and when I play FarmVille it now wants to reload from scratch each time I go into the game and it is sucking up my broadband usage really quick by doing this.
    I have been trying to play around with different settings to see if I can get flash player to save the data but nothing seems to work. I am now starting to think it may not be flash player that is the problem.
    If anyone knows how to fix this problem it would be greatly appreciated.
    Thanks.

    I am using IE9 but I do not have that setting set and I hardly ever delete all my history etc.
    I have also just tried playing on my partners apple which I dont know much about except that it is about 5 years old. Anyway the apple is doing the same thing that this new computer is doing... hmmm.

  • Help with saving attachments from iphone email to my phone

    Hi...can anyone help me with saving photos sent to me in jpg as attachments in email ....can see them in email but unable to save photos? cant seem to find how to in tech. information..thanks!!

    You may want to submit this as a feedback or feature request.
    This link allows you send feedback on any Apple product.
    http://www.apple.com/feedback/

  • Help with Exporting Edited Version of Picture

    With iPhoto I an trying to edit (crop and adjust the color) of photographs. I have tried exporting the photo, but the cropping does not come over. Color changes come fine, but no cropping.
    HELP?!?!?
    Thanks.
    B2

    Cropping takes a few steps. Click Crop, choose a constrain ratio if you want, adjust the crop box to where you want it. Finally, click Crop again to perform the crop. When you click Done or select another photo you should get the message "Saving Changes" (or something to that effect) to let you know it worked.
    Are you doing all of these steps?

  • Help with graphic editing

    I think I have gotten myself in over my head. I am using the
    FreeHand software, & I know absolutely NOTHING about graphic
    design or this program. So, I'm hoping that someone with some
    patience can help me out. I have downloaded a vector image & am
    trying to edit it. The picture is of a flower. I basically only
    need to change the background color & to change the overall
    color of the flower. I have no idea where to begin. Any help?
    Thanks!!!

    Even though you have downloaded a vector illustration if it
    was saved as
    an EPS and brought into FH then it may or not be editable at
    that point.
    If it looks and acts like one piece of artwork (cannot
    select
    separate parts of it) and you cannot "Ungroup" it (Select art
    > Edit >
    Ungroup) then you are probably dealing with an EPS that FH
    cannot edit.
    Go to the Object Inspector and see what it says it is at the
    top of
    the panel when the artwork is selected. If it says Group or
    Path or
    Compound Path then you can edit. If it says EPS then you
    can't edit.
    You will need to crack it by using Illustrator or Distilling
    to PDF. If
    you are on a Mac you can open the EPS into the application
    Preview and
    it will make it a PDF. Then save it as a PDF from Preview and
    open in
    FreeHand.
    Good Luck,
    Rich
    Dani0628 wrote:
    > I think I have gotten myself in over my head. I am using
    the FreeHand
    > software, & I know absolutely NOTHING about graphic
    design or this program. So,
    > I'm hoping that someone with some patience can help me
    out. I have downloaded
    > a vector image & am trying to edit it. The picture
    is of a flower. I
    > basically only need to change the background color &
    to change the overall
    > color of the flower. I have no idea where to begin. Any
    help? Thanks!!!
    >

  • PLEASE help with 24p editing mixed with 29.97

    Hello--I am a newbie to all of this 24p editing. I shot a zombie movie last summer and have a MESS with the footage. Half was shot in 24p advanced mode on the Panasonic AGDVX100a with a 16:9 anamorphic lens, and half shot at 4:3, 29.97 with a Sony DVX2100.
    I realize I need to "conform all of this footage".
    Can I stay on a 29.97 timeline? I heard that dropping 24p adv footage onto a 29.97 timeline results in a "jittery" picture once output to TV.
    Should I edit on a 24p timeline, and convert the 29.97 footage?
    It seems that when I drop my 24p advanced footage into Premiere (CS4), on a 24p timeline--the fouth frame is identical to the fifth. Does this mean that pulldown removal is not happening correctly? How do I fix this?
    Even if I do figure out how to edit on a 24p timeline, when I do my final render, what should my output file be? should I try a 24p DVD?
    Also...This is an EFFECTS HEAVY film. So I need to do an edit in Premier, then render it and bring it into After Effects, do the effects, and do another render...then I will take that render back into Premier. Will this work? What render setting should I use? How will the pulldown be affected, if at all?
    ANY HELP IS GREATLY APPRECIATED!!! I have scoured the net, but have not come across the right answers yet...please help!!!!

    Hello orion,
    Your HDR-CX550V records HD as MPEG4 AVC/H.264; and SD as MPEG2-PS. It appears to be an AVCHD camcorder (at least for HD video).
    Storing your +original footage+ could be done at least two ways:
    1 - record to removable flash media and save the Memory Sticks as your originals, as you formerly saved your tapes. (If I did my math correctly, you could fit up to about 6.5 hrs. HD video on a 16GB memory stick depending on the recording mode you select.)
    2 - copy the +entire directory structure+ from the flash media to a hard drive; this is important, you need the entire directory & files from the root folder on down, not just the AVCHD folder or just the .mts files. Test this before committing to it as your archiving method.
    The third way (and what I would probably do myself):
    3 - Log & Transfer into FCE and then archive the resulting QuickTime .mov files to a hard drive. (Admittedly, this is technically not the 'original' footage because it has been transcoded to Apple Intermediate Codec; however the quality is excellent and should be almost indistinguishable from the original AVCHD video.)
    If you convert the video files yourself (you mentioned iSkysoft), you need to convert to QuickTime/Apple Intermediate Codec to use the video in FCE.
    FCP can handle 5.1 audio however the state of the art of these camcorders does not lend itself to direct import or conversion from the camcorder. Even the pros need dedicated 5.1 audio hardware. Frankly, 5.1 audio on these consumer camcorders is more a marketing gimmick than something actually useful at present.
    The filenames 00001.MTS, 00002.MTS etc. are assigned by your camcorder and there is nothing you can do to change that. (Although you could rename the QT .mov files after you Log & Transfer from your camcorder).
    - hoping this helps ...

  • Need help with batch processing picture packages

    Hi, I am having trouble batch processing picture packages is CS2.  (Windows).
    I have hundreds of images that need to be processed into picture packages and would love to find a speedier way to do this.
    I know how to create an action.  I know how to batch process from this action.  I also know how to create picture packages, but I cannot get the final result I am after - please read on....
    I have seperated all the images into their seperate folders for each style of picture package required.
    I can create an action for the picture package required and then do a batch process on the particular folder, but this leaves all the picture packages open on the desktop - as when you chose the close and save in the batch process - this only closes and saves the original image - the picture package has been created as a new document and is on the desktop still open - named Picture Package 1, Picture Package 2 - etc etc.
    I hope I am making some kind of sense here... (??!!)
    What I would like to happen is that the picture package will be saved over the original file (or to a new folder) with the original file name of the original image or maybe even with an adjustment to file name (e.g - orignal file name sc1234.jpeg - new file name sc1234packA.jpeg)
    So is this possible to do??  I'm thinking there must be a way.... i'm sure there are many group photographers out there who come across this everyday??
    Otherwise I have to save each picture package manually to original file name (via searching though files to match the original image to the picture package....) Very time consuming.
    Thanks for your help (in anticipation)...
    Jodie

    hmm - thanks for that - sounds like I will have to try and find some info and assistance regarding the scripting - it may be something I need to look into at a later time in the future....
    At the moment though I will have to plod along with this method I guess!
    Thanks for your assistance...
    Jodie

  • Help with Saving Progressive Layers as Video or Files

    Hi, I am interested in creating an animated video with Photoshop. I have 80+ layers, each one building on the last. For example, layer 1 is a simple horizontal line ( - ). Layer 2 is a simple vertical line ( | ). With both layers on, they form a cross ( + ). Layer 1 must be visible for layer 2 to make sense, within the video. So, each previous layer must remain visible when the next layer is turned on. Then the next, then the next.
    Previously, I have manually saved layer 1 as a JPG, turned on layer 2 and saved the new file, turned on layer 3, saved the next new file,and so on, until I go through all layers. Then I used a video editing program to put the files in sequence and render it as a video.
    I am hoping PS (CS5) can help me. I need to render a video with each layer turning on (perhaps a .03 second delay, like in the animation strip) but with all previous layers remaining on. Onion skin's max layers is 8, so that doesn't work for me.
    If I can't render the video directly from PS, how can I create an action that will
    1. save file without a prompt as JPG with the layer name as the file name, in the directory where the PSD file resides
    2. make visible the next layer up (or down, whatever)
    3. repeat until all layers are complete, no matter how many layers

    They aren't necessarily only line drawings. As an animated video, it may be line drawings, then a photo, then drawings on the photo. So it's something like this:
    layer 0 = black background
    layer 1 = white vertical line
    layer 2 = blue horizontal line
    layer 3 = photograph in the upper left corner
    layer 4 = blue dot over the photograph
    An example of one of my shorter films is
    I did that by saving every layer as a separate JPG, then putting it together in a video editor. That's how I've always done it, but that won't work anymore due to the volume of the layers.

  • Need help with saving item from combobox to textfile

    Hi all. right now my codes can only save one stock information in the textfile but when I tried to save another stock in the textfile , it overrides the pervious one.
    So I was wondering which part of my codes should be changed??
    DO the following
    Create a fypgui class and put this bunch of codes inside
    import java.awt.GridLayout;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import java.awt.event.KeyEvent;
    import java.awt.event.KeyListener;
    import java.io.BufferedInputStream;
    import java.io.BufferedReader;
    import java.io.DataInputStream;
    import java.io.File;
    import java.io.FileReader;
    import java.io.FileWriter;
    import java.io.IOException;
    import java.io.InputStream;
    import java.net.URL;
    import java.util.ArrayList;
    import java.util.Scanner;
    import javax.swing.JButton;
    import javax.swing.JComboBox;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    import javax.swing.JPanel;
    import javax.swing.JTabbedPane;
    import javax.swing.JTable;
    public class fypgui {
         private ArrayList<Stock> stockList = new ArrayList<Stock>();
         private String[] stockArray;
         private JComboBox choice1;
         private JTabbedPane tabbedPane = new JTabbedPane();
         private JPanel displayPanel = new JPanel(new GridLayout(5, 1));
         private JButton saveBtn = new JButton("Save");
         private JPanel choicePanel = new JPanel();
         String yahootext;
         String     symbol;
         int index;
         public fypgui() {
              try {
                   //read from text file for stockname
                   File myFile = new File("D:/fyp/savedtext2.txt");
                   FileReader reader = new FileReader(myFile);
                   BufferedReader bufferedReader = new BufferedReader(reader);
                   String line = bufferedReader.readLine();
                   while (line != null) {
                        Stock stock = new Stock();
                        // use delimiter to get name and symbol
                        Scanner scan = new Scanner(line);
                        scan.useDelimiter(",");
                        String name = "";
                        String symbol = "";
                        while (scan.hasNext()) {
                             name += scan.next();
                             symbol += scan.next();
                        stock.setStockName(name);
                        stock.setSymbol(symbol);
                        stockList.add(stock);
                        line = bufferedReader.readLine();
                   //size of the array(stockarray) will be the same as the arraylist(stocklist)
                   stockArray = new String[stockList.size()];
                   for (int i = 0; i < stockList.size(); i++) {
                        stockArray[i] = stockList.get(i).getStockName();
                   //create new combobox
                   choice1 = new JComboBox(stockArray);
                   //For typing stock symbol manually
                   choice1.setEditable(true);
                   //set the combobox as blank
                   choice1.setSelectedIndex(-1);
              } catch (IOException ex) {
                   ex.printStackTrace();
              JFrame frame1 = new JFrame("Stock Ticker");
              frame1.setBounds(200, 200, 300, 300);
              JPanel panel1 = new JPanel();
              panel1.add(choice1);
              choice1.setBounds(20, 35, 260, 20);
              JPanel panel2 = new JPanel();
              JPanel panel5 = new JPanel();
              panel5.add(saveBtn);
              displayPanel.add(panel1);
              displayPanel.add(panel5);
              tabbedPane.addTab("Choice", displayPanel);
              tabbedPane.addTab("Display", choicePanel);
              JLabel label2 = new JLabel("Still in Progress!");
              choicePanel.add(label2);
              frame1.add(tabbedPane);
              frame1.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              frame1.setVisible(true);
              saveBtn.addActionListener(new ActionListener() {
                   public void actionPerformed(ActionEvent e) {
                        // initalize index as the postion of the stock in the combo box
                        index = choice1.getSelectedIndex();
                        /*if the postion of the combobox is not blank,
                             it will get the StockName and symbol according to the
                             position and download the stock*/
                        if(index != -1){
                             symbol = stockList.get(index).getSymbol();
                             save(symbol);
         @SuppressWarnings("deprecation")
         public void save(String symbol){
              try {
                   String part1 = "http://download.finance.yahoo.com/d/quotes.csv?s=";
                   String part2 = symbol;
                   String part3 = "&f=sl1d1t1c1ohgv&e=.csv";
                   String urlToDownload = part1+part2+part3;
                   URL url = new URL(urlToDownload);
                   //read contents of a website
                   InputStream fromthewebsite = url.openStream(); // throws an IOException
                   //input the data from the website and read the data from the website
                   DataInputStream yahoodata = new DataInputStream(new BufferedInputStream(fromthewebsite));
                   // while there is some contents from the website to read then it will print out the data.
                   while ((yahootext = yahoodata.readLine()) != null) {
                        File newsavefile = new File("D:/fyp/savedtext.txt");
                        try {
                             FileWriter writetosavefile = new FileWriter(newsavefile);
                             writetosavefile.write(yahootext);
                             System.out.println(yahootext);
                             writetosavefile.close();
                        } catch (IOException e) {
                             e.printStackTrace();
              } catch (IOException e) {
                   e.printStackTrace();
         public static void main(String[] args) {
              // TODO code application logic here
              new fypgui();
    Create a Stock class a put this bunch of codes inside
    public class Stock {
         String stockName ="";
         String symbol="";
         double lastDone=0.0;
         double change =0.0;
         int volume=0;
         public String getStockName() {
              return stockName;
         public void setStockName(String stockName) {
              this.stockName = stockName;
         public String getSymbol() {
              return symbol;
         public void setSymbol(String symbol) {
              this.symbol = symbol;
         public double getLastDone() {
              return lastDone;
         public void setLastDone(double lastDone) {
              this.lastDone = lastDone;
         public double getChange() {
              return change;
         public void setChange(double change) {
              this.change = change;
         public int getVolume() {
              return volume;
         public void setVolume(int volume) {
              this.volume = volume;
    Create a folder called fyp in D drive and create two txt file in it.
    -savedtext.txt
    -savedtext2.txt
    in the saved savedtext2.txt add
    A ,AXP
    B ,B58.SI
    C ,CLQ10.NYM
    this is my whole application. if you guys can tell me what can I do to make sure that the stock info doesn't overrides . I will more than thankful.
    Edited by: javarookie123 on Jul 9, 2010 9:49 PM

    javarookie123 wrote:
    Hi all. right now my codes can only save one stock information in the textfile but when I tried to save another stock in the textfile , it overrides.. 'over writes'
    ..the pervious one.
    So I was wondering which part of my codes should be changed??Did not look at the code closely, but I am guessing the problem lies in the instantiation of the FileWriter. Try [this constructor|http://download.oracle.com/docs/cd/E17409_01/javase/6/docs/api/java/io/FileWriter.html#FileWriter(java.io.File,%20boolean)] (<- link). The documentation is a wonderful thing. ;-)
    And generally on the subject of getting help:
    - There is no need for two question marks. One '?' means a question, while 2 or more typically means a dweeb.
    - Do your best to [write well|http://catb.org/esr/faqs/smart-questions.html#writewell] (<- link). Each sentence should start with an upper case letter. Not just the first one.
    Also, when posting code, code snippets, XML/HTML or input/output, please use the code tags. The code tags protect the indentation and formatting of the sample. To use the code tags, select the sample and click the CODE button.

  • Help with saving music to a portable HD

    In the edit> preferences> advanced area in itunes I had always marked to save all music that is downloaded to my itunes music to also save into the itunes music folder. I had to reinstall itunes about 5 times due to PC issues, nothing to do with itunes or the touch.
    The last time (which finally worked with the PC) I forgot to go into the edit
    tab and mark this option. Now all the music that I have put into my itunes is not in my itunes music folder on my PC.
    The only info I can find regarding saving my music is to save to a disc, which I don't want to do. Can anyone walk me through how to save music from my itunes on to a portable hard drive.
    Thanks for any help!

    Thanks for the reply. That is what I did when I had to save my music before sending in the PC for repair. I apologize, I wasn't too clear on my question.
    The music that I have recently downloaded since I put the itunes back onto my computer is not in my itunes music folder. Since I didn't mark it to do that on the preferences page when I reinstalled itunes.
    I hope I am saying this right. I have all the old stuff in my itunes music folder but none of the new stuff since I didn't make that a preference.
    Is there a way to get the new stuff saved?

Maybe you are looking for

  • With Firefox 5.0.1, I can no longer have search terms highlighted when I search via cache. This makes searching for key concepts impossible now. Is there a plan to fix this issue?

    In the past, before Firefox 5.0.1, I would search for key terms via the cache mode; thus, the terms would be highlighted in various colors so that I could scroll down the page and find the exact terms. This is no longer functioning since I downloaded

  • Windows Update dead as dead in death.

    Hi. I just want to let you guys know about a common defect in windows update that maybe repairable. It affects users since years and may pop up over and over , depending on the dll installed. Problem: A path problem stops the WUD from starting. From

  • Problem in finding table for check no.

    Hi Experts, I need to print the check number in my form, but the functional person gave the table name as REGUD, but it is a structure. Can any one let me what would be the table for check number(REGUD-CHECT) and bank name(REGUD-UBNKA). Thanks & Rega

  • Authorize Device

    when i go onto adobe digital edition 2.0 and click on authorize device it won't work and i need it to work for my e-reader, so tell me how i can make it to work (when i press adobe id i can see that i have a long id number|) but Authorize device is n

  • Bdc for tr cv01(dms)

    hi friends,      Currently i am working on bdc on tr cv01n. Here i want to upload tiff file and pdf file. The file path is given in flat file but, if i run bdc it is not picking the path in flat file.(here i have to pick that file name manually) My r