Help with update issues and resulting boot problems

Ok so I have arch installed and can get through all the updating except for glibc..I know there are countless post on the subject and I have spent the past two days reading through them. I have also broken my system and have done about 15 re-installs trying to get through this. Also, after I update (excluding glibc) and re-boot I get the root device cannot be found error and am dropped to a shell.
What I am asking is, can someone PLEASE give me a straight forward answer on how to fix this stuff...I'm tired of reading and re-installing.
I'd appreciate any help you can give..

If you're using the most recent iso, the /lib to /usr/lib move has already been taken care of, so none of those countless bbs threads (or the infinitely superior official advice from the devs) apply any more. Please post the exact commands you are using and the exact error messages you are seeing.

Similar Messages

Help with intricate search and results display

Hi All,
I am looking for help with a problem I have, my knowledge on Numbers is limited, I have learnt a lot by trial and error but I do not know where to start on this problem.
What I am trying to do is display result from sheet 1 onto sheet 2 when I enter the letters of the REFERENCE into cell C3. Below is an example of the result I am tring to achieve -
SHEET 2
Reference
AB
Reference
SZone
Parts
LZone
Parts
AB10
3
75
2
100
AB10
3
75
2
100
AB10
3
75
2
100
AB10
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB12
3
75
2
100
AB12
3
75
2
100
AB13
3
75
3
75
AB13
3
75
3
75
AB14
3
75
3
75
AB14
3
75
3
75
AB15
3
75
1
200
AB15
3
75
1
200
AB16
3
75
3
75
AB16
3
75
3
75
AB21
3
75
3
75
AB21
3
75
3
75
AB22
3
75
3
75
I have searched for AB by entering it in cell B3 on Sheet 2, an auotmatic search has been carried out on Sheet 1 and all the columns have been brought into sheet 2 with the corresponding data and placed under the COLUMN HEADERS. I have over 4000 lines on Sheet 1, although the most result that will ever be pulled through will be 150.
When the data is pulled in I will need to do other calculation in the COLUMNS F, G and H so the data need to only be mapped to COLUMNS A to E.
Also I want to be able to use this spreadsheet on my iPad.
Has anybody got an idea/solution that will help.
Thanks in advance.
Ian

Ian,
We've had a recent report of troubles with large tables in the iOS version of Numbers, so you may want to consider ways to accomplish your goals without the full 4000-row set of data.
I re-read the problem statement in your original post and see that I should have known that you were needing a solution for both platforms. But, I'm still not clear on what part you have figured out and what part you still need help with. We often refer to your second table as a "Breakout Table". There are different ways to program it. My favorite is to add a column to the main table that identifies rows that meet the transfer criteria and assigns them a serial number to help determine where they should go in the second table.
Here's an example:
In the new column on the right edge of the table T1, the expression is:
=IF(ISERROR(FIND(T2 :: $A$1, A)), "", COUNT($F$1:F1))
Note that the first cell in the Aux column is seeded with a zero.
The expression in the body cells of the second table, T2, is:
=INDEX(T1, MATCH(ROW()-1, T1 :: $F, 0), COLUMN())
Note that the search term is to be entered into Cell A1 of table T2.
Does this give you a start?
Jerry

Help with UPDATE table and database RELATIONSHIPS

HI there, I have been trying to create an update table for
weeks now and keep getting error messages.
The database has a table named:
"books" in the table cells are "idbook" and "book".
"suppliers" in the table cells are "idsupplier" and
"supplierName".
"category" in the table cells are "idcategory" and
categoryName"
They all have a relationships with this table:
"results" in the cells are "idbook", "idsupplier" and
"idcategory".
This "results" table brings all of the above tables together.
When I try to do an update, i am doing one to the results
table. Is this correct?
The updates have problems because when drawing the text to
the update table to view it comes in text form.
When trying to update, it wont becuase all of the cells in
the results table are numeric. This is because of the
relationships.
Can anyone suggest where i may be going wrong.
Ask anything you need to.
TA

MM_editCmd.CommandText = MM_editQuery
MM_editCmd.Execute
MM_editCmd.ActiveConnection.Close
If (MM_editRedirectUrl <> "") Then
Response.Redirect(MM_editRedirectUrl)
End If
End If
End If
%>
<%
Dim Recordset1__MMColParam
Recordset1__MMColParam = "1"
If (Session("MM_UserName") <> "") Then
Recordset1__MMColParam = Session("MM_UserName")
End If
%>
<%
Dim Recordset1
Dim Recordset1_numRows
Set Recordset1 = Server.CreateObject("ADODB.Recordset")
Recordset1.ActiveConnection = MM_connSeek_STRING
Recordset1.Source = "SELECT * FROM Query1 WHERE UserName = '"
+ Replace(Recordset1__MMColParam, "'", "''") + "'"
Recordset1.CursorType = 0
Recordset1.CursorLocation = 2
Recordset1.LockType = 1
Recordset1.Open()
Recordset1_numRows = 0
%>
<%
Dim rsUpdate
Dim rsUpdate_numRows
Set rsUpdate = Server.CreateObject("ADODB.Recordset")
rsUpdate.ActiveConnection = MM_connSeek_STRING
rsUpdate.Source = "SELECT * FROM tblSpecies"
rsUpdate.CursorType = 0
rsUpdate.CursorLocation = 2
rsUpdate.LockType = 1
rsUpdate.Open()
rsUpdate_numRows = 0
%>
<%
Dim Repeat1__numRows
Dim Repeat1__index
Repeat1__numRows = -1
Repeat1__index = 0
Recordset1_numRows = Recordset1_numRows + Repeat1__numRows
%>
<html>
<head>
<link href="css%20files/paragraph.css" rel="stylesheet"
type="text/css">
<script language="JavaScript" type="text/JavaScript">

</script>
</head>
<body bgcolor="#FFFFFF" leftmargin="0" topmargin="0"
marginwidth="0" marginheight="0"
onLoad="MM_preloadImages('images/Publicationb.gif','images/Factsheetsb.gif')">
<table width="100%" height="100%" border="1"
cellpadding="0" cellspacing="0" bordercolor="#5D5D5D">
<tr>
<td colspan="2">
<div align="right"></div>
<div align="left"></div>
</td>
</tr>
<tr>
<td colspan="2"><table width="100%" height="100%"
border="0" cellpadding="0" cellspacing="0"
bordercolor="#5D5D5D">
<tr>
<td valign="top"><form
ACTION="<%=MM_editAction%>" METHOD="POST" name="form1">
<table width="90%" border="0" align="center"
cellpadding="0" cellspacing="0">
<tr>
<td valign="top"><div
align="center"></div> <table border="1" align="center"
cellpadding="2" cellspacing="0" bordercolor="#FFFFFF">
<tr bgcolor="ECECD7">
<td colspan="2"><div align="center">
<p><strong><font size="3">Update Key Word
& Category</font></strong></p>
</div>
</td>
</tr>
<tr>
<td><div align="center">
<p><font size="1">Enter Up to 10 Species /
Product
Name</font></p>
</div>
</td>
<td><div align="center">
<p><font size="1">Select a
Category</font></p>
</div>
</td>
</tr>
<tr>
<td colspan="2" bordercolor="#D0D09D">
<%
While ((Repeat1__numRows <> 0) AND (NOT
Recordset1.EOF))
%>
<table width="100%" border="0" cellspacing="0"
cellpadding="0">
<tr><td width="50%"><div align="center">
<input name="f1" type="text" id="f13"
value="<%=(Recordset1.Fields.Item("TimberSpecies").Value)%>"
size="33">
</div></td>
<td width="45%"><div
align="center"></div></td></tr></table>
<%
Repeat1__index=Repeat1__index+1
Repeat1__numRows=Repeat1__numRows-1
Recordset1.MoveNext()
Wend %>
<div align="center"> </div> <div
align="center">
</div></td></tr><tr>td
colspan="2"> </td></tr><tr><td
colspan="2"><div align="right"><p><font
size="1">To Finalise Your Changes Please Press the Update
Button
<input name="update2" type="submit" id="update"
value="Update">
<input type="hidden" name="MM_update" value="form1">
<input type="hidden" name="MM_recordId" value="<%=
rsUpdate.Fields.Item("TimberSpecies").Value %>">

Need help with BCCode A and resulting unwarned restarts please.

Problem Event Name:
BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
BCCode: a
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF800035F3477
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
I have already done a chkdsk and chkntfs. No issues were found during either of these processes.
The OS will restart randomly, varying from just after entering the desktop environment to 15 minutes later.
Does anyone have any insight on how to fix this without doing a fresh install?

PK
BCC "A" is generally a driver problem read about it here If you can boot the machine (even in safe mode)...
We do need the actual log file (called a DMP file) as they contain the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
We prefer at least 2 DMP files to spot trends and confirm the cause.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
If you are using Blue screen view, who crashed, or a similar application, don't. They are wrong at least as often as they are correct
Wanikiya and Dyami--Team Zigzag

Please help with speed issues and powerline adapte...

Hello all,
I have had infinity for a few months now and I am very unhappy with the quality of service so far, I wont go into that however,
the problems I currently have are:
speed dropped from 76.8Mbps down to 34.6Mbps within a week of going live, they have replaced my HH3 twice to try and remedy this but its still the same, anything you can recommend?
as for the powerline adapters, i bought 2 extra when I took out my infinity package, all 4 have failed twice, they have been replaced aswell, received a new set this morning to install and they don't work!
When I set them up I get the green data light and green power light, however once I plug the Ethernet cables in, the data lights go off after around 10sec,
no matter how many times I reset and marry them its the same output, then maybe they will work for around 10-15 minutes and then go off again.
I have 4 adapters in use ATM
2 for vision and 2 for my computer
bt sent me 2 different models for some reason
I have the white simpler networks ones, 2 have black writing and 2 have orange,
sorry for the essay but from the experience I have had from BT so far I am not impressed
thankyou for any help in advance
regards

Ratty2012 wrote:
The 200mbps refers to the theoretical duplex speed and not the actual connection speed. In ideal conditions the actual is about 70 to 80mbps for the 200 adapters. So therefore most of the time in normal conditions they connect at a much lower speed.
That's what I meant, hence why would you get 500Mbps ones if they ain't going to reach unless you're going to have your house wiring upgraded if the speed is rubbish. Didn't mean to be rude xD
If this helped you please click the Star beside my name.
If this answered your question please click "Mark as Accepted Solution" below.

Help Needed: Updated Software - And Slew of Problems Arose

I'm soooo frustrated - and I'm hoping somebody will be able to help me. I updated my itunes and had many of the problems everyone else has seemed to have (not being able to find it or my music). I finally reinstalled the new version, and the itunes came back, but my library was empty! Then, I plugged my nano in, all my music was gone and I got a pop-up on my screen saying my ipod was corrupted. So, I restored to the factory settings, which I didn't think would matter because all my music was not on the ipod anyway -- but, it was on my hard drive. How do I get my music from my hard drive and put it into my library so that it can be restored on my ipod?

CAGD2346,
How do I get my music from my hard drive and put it into
my library so that it can be restored on my ipod?
Try these links:
iTunes: Adding songs from the hard drive to your library
http://docs.info.apple.com/article.html?artnum=93140
iTunes: About the Add to Library, Import, and Convert functions
http://docs.info.apple.com/article.html?artnum=301509
Hope this helps you,
Jon

Help with Updated Firmware and Mediasou

Hey,
Looking for a quick reply if possible. I recently updated the firmware and the layout of my Zen touch has changed in Mediasource. Let me show you what it was, and what I wanted it as (for the easy transfer of files, eg. have the artist/album/genre bar on the side)
[IMG"]http://img64.imageshack.us/img64/829/creative00qo8.th.jpg[/IMG]
This is what it is, with folder etc. I dont want it like this.
[IMG"]http://img89.imageshack.us/img89/6329/creative002el3.th.jpg[/IMG]
Any help would be appreciated. Thank you.

Your firmware is the PlaysForSure (also known as MTP) version. For PlaysForSure devices, the organization of the tracks as seen in the PC software (such as Creative MediaSource, Creative ZEN Media Explorer and Windows Media Player) is by folders and filenames. That is the nati've organization of PlaysForSure.

Help with 655 Max and Possible Memory Problems...

Just recieved my 655 Max and have put my system together, but when I turn it on it makes a constant beeping sound. I tried taking out both memory sticks, lol, and turning it on and the sound stops, I tried putting in one memory stick and the sound starts again.
I suppose this is a memory problem.
by the way I am using Corssair 256mb CMX256a-3200C2 memory.

[The alarm that you are getting is the CPU Fan Alarm you will have to diable it in the Bios. I am using a Vantec Aeroflow heatsink and my CPU alarm also is constantly on and was very annoying till I disabled it. My system still doesn't boot to XP yet as I have RMA'd bothe the MB and Ram. QUOTE]Originally posted by TritonB7
Hey Kaiguy the comp does continue to make sounds till I shut the system off. And I'm not sure how a standard pc tone sound would sound like, :(. But it does make beep followed by a lower pitched beep, and it repeats this till I shutdown the system.
(1) I cannot Access Bios.
(2) I have two sticks of Corsair 256mb CMX256a-3200C2 memory. I do not have any other ram available that will be compatible with this motherboard. Ive tried using one stick at a time in each of the slots. No Luck.
I highly think that both sticks not working is very unreal.
(3) and reseting bios by the jumper isnt working either.
I can probably try buying some diffrent memory, or returning the whole mobo and exchanging it for the same one.
By the way on my monitor when i turn the comp on it says 8x Extreme or something close to it while the comp is beeping. I doubt that, that has anything to do with it. This is my first MSI board :( , I've always been an Asus person but Im still open for MSI i'm sure I just recieved a faulty board.
[/QUOTE]

Help with updating model and serial on thinkpad tablet 2

Hi was after the procedure for changing / updating the MTM and serial number on a thinkpad tablet 2 that has just had a new mainboard installed.
We are a authorised warranty center in AUS yur help would be appreciated

You need to go through your formal Lenovo contacts for these tools/procedures. We can't help you from the forum.

Help with Updating Iphone and Ipod after updating Apple ID

I just updated my email/Apple Id and unable to login to my App store or anything on my Iphone or my Ipod what do I need to do to get this corrected? Please HELP!!

Have you tried logging out of your old one first?

Need help with Apple ID and broken phone problem!!

My iPhone is broken and apple are goin to exchange it for a new one. Thing is before they do this they need my apple I'd and password. I thought I had forgot and wouldn't mind as av had two id's. Now I think I might mind it, but since I can't check my phone is there any other way of finding out if this is the one connected to my phone? Maybe by seriel number or phone number..

Welcome to the Apple Community Frances.
You may be able to find your Apple ID at Look up your old and forgotten Apple ID

Updated 3GS to new operating system and a week later all music and ringtones disappeared and will not let me put them back on phone. Can anyone help with this issue?

Can some one help with these issues? Thanks.

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

How do I Help Apple Care Stop Warring with Each Other and Fix the Problem with My iPhone that They Acknowledge Creating?

How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

I have a desktop machine windows 7 based with CS5 loaded and working without problem. I have recently purchsed a laptop running 8.1 windows. I have loaded the cs5 package onto the laptop and it appears ro work but I am being told there are updates. I hav

I have a desktop machine windows 7 based with CS5 loaded and working without problem. I have recently purchased a laptop running 8.1 windows. I have loaded the cs5 package onto the laptop and it appears to work but when I try to update, although I am being told there are updates it attempts to download the update but then tells me there is a problem and to quit and try again later.. I have tried a number of times to download the updates but itkeeps telling me to quit and try later. what is wrong please?

There could be a 32 bit vs 64 bit issues-is the old machine a 32 bit? and what is the new machine as far as 32/64 bit. I am not sure now if CS5 has in the help menu of the PS app the selection to update within PS if so that might work. I know that the Creative cloud app for installs updates etc has caused me much consternation over the last couple few years. Last it could be something like your Software firewall settings or anti-virus anti malware programs. I know that updating the infamous adobe flash that Internet Explorer pop ups setting and having AV turned on as opposed to off can interfere or plain break the update ability

Problem with update Firmware and Fax with m276nw

Hi
First of all sorry for my english...
I have two problems
1) I can't update the printer in wirelless mode, I mean the update program (version 2014-08-05 , Version 20140718, 12.05M) and the printer work but finally the printer is not updated.
How can i do it?
2) I'd prefer to forward fax in email or in alternative I'd want to read in a web interface. In this case I have a suggestion: An update could be the way.
Thx
P.S. Sorry again

Hello @Compyweb,
Welcome to the HP Support Forums!
I would like to assist you today in resolving the firmware update issue and the fax forward to email issues that you're experiencing on your HP Laserjet Pro 200 Colour MFP M276nw. I understand that you have been trying to update your printers firmware via the wireless connection but your printer does not want to do that. I'm going to provide you further instruction on how to properly update the firmware.
How to Properly Update Firmware:
It is best to update firmware through a USB Cable connection. This is because the firmware update will reprogram your printer. Sometimes with wireless connections there can be intermittent communication. If the firmware update is interrupted in any way while the printer is being updated it can cause a programming failure on your printer. If this occurs you most likely would need a printer replacement. Also, a firmware update gets sent to your printer much like a print job. Therefore, you need to ensure that you do no have any print jobs in queue waiting to print before you update the firmware.
What I would suggest doing is running the HP Print and Scan Doctor Tool. If you run this tool and select 'fix printing' than the tool will run a scan on your computer and ensure that the connection, software and driver are all properly setup. If the HP Print and Scan Doctor identifies any issues it will attempt to resolve them for you. I suggest installing the printer for USB connection before running this tool as you want to run the firmware update through USB.
HP Print and Scan Doctor
Once you run the HP Print and Scan Doctor Tool and get the all clear that everything is set up properly than you can run the firmware update. Please click on the following link for the proper firmware download:
HP LaserJet Pro Series Firmware Update Utility
Once the utility is downloaded, you want to run the tool and send the firmware to the printer. The printer may turn itself off at the end of the update, just turn the printer back on if it doesn't turn on automatically.
In terms of wanting to forward faxes to email or an alternative option like receiving faxes in a folder on your computer, these are not options that you have with your HP Laserjet Pro 200 Colour MFP M276nw. As the specs for your model printer: LaserJet Pro 200 color MFP M276nw Specs indicate you only have the option to send faxes from a computer.
Should you still want to receive faxes to your email you could check out the third party service: Efax
However, I believe you may have to pay for this service. Also, should you have any issues with the Efax service HP does not support this on your product. That means that if you need technical support for efax you need to speak with efax regarding this. For further information regarding Efax, please visit: Efax: Easy faxing anywhere
Please let me know if this information resolves your issues. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Help with update issues and resulting boot problems

Similar Messages

Maybe you are looking for