Here we go again. 601bt issues

gonna make a quick summery of the post that got deleted with the last forum
radio reception .- AM useless. FM lots of pops and noise
XM radio. - does not have audio 1/2 the time the car is started. must switch inputs
VERY POOR FEATURE SET. the module i bought supports it but the UI and features are TERRIBLE.
Ipod -- Lost ability to play ipod a month after. can scroll through songs and skip them but will not play. plus picking songs is almost impossible while driving. ipod stolen last week so i guess i don't need to concern myself with that for now
VOLUME -- this one is annoying the ****** out of me. at least half the time i start the car i cannot control the volume from the head unit. only works from the remote. after a while of driving it usually starts working from the head unit
here's a new one that just started. within the first 5 min of driving the car when if i hit a bump the radio restarts. never happens after the first 5 minutes of driving. wiring seems to be fine
Mirror link is a huge dissapointment. not really sony's fault but it seems like its dead in the water
is anyone else having any of the problems i am having?
overall the UI seems poorly thought out. too hard to pick a source. too many distractions from the road while trying to change things. i love the sound and the BT seems to work well but i cannot see myself buying another sony after this.
Solved!
Go to Solution.

Hello
The issues listed seem to be related to the wiring of the car stereo. Please get the wiring checked by a professional installer.
Following is the installation manual:
http://www.docs.sony.com/release/XAV601BT_install_EN_FR_ES.pdf
Regards,
Colby

Similar Messages

My daughter forgot her password and now her ipod touch is disabled. When I connect it to itunes it does not come up on the screen as a device. What can I do to get her itouch working again?

My daughter forget her password and now her ipod touch is disabled. Red message says to connect to itunes. When I do connect to itunes, the device is not recognized and then a message comes on the screen that says it is locked and to enter the password to access it. I cannot access the password and since itunes does not recognize the device, it does not come up on the list on the left, i cannot reset it. What do I need to do so she can use her ipod touch again? Thanks

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG

Linkification (any version) does not work with FF9.0.1. Here we go again! Same old problem. Why don't you guys develop a permanent fix??!!! Don

Here we go again. Same old problem with FF updates. FF9.x.x will not allow clickable internet links. They are dead when typed. ALL IE versions have clickable links BUILT IN! Why can't you do it??? Don't blame it on "third party add on incompatiblity." It's not their fault. It is YOUR fault for not including it. Do not blame users either.
xpi files are not compatible with FF9.x.x even when dragged on to it

'''''Linkification''''' was not developed by Mozilla.
*The third party developer appears to have abandoned the Add-on (no longer updates it).
*The last update available on the Mozilla Firefox Add-ons site ( https://addons.mozilla.org/en-US/firefox/addon/linkification/ ) was made compatible only through Firefox 3.6.x
*The developer posted version 1.3.9 on his/her own site which was made compatible through Firefox 4
*'''''Read the comments section on the Add-ons page for suggestions.'''''
**I would NOT download from another site as you do not know what you might be getting.
**You can install the following and force compatibility in Add-ons > Extensions
***https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=ss
**Under "Reviews", click "See all ###user reviews". The suggestion ''by marwn098 on November 11, 2011'' is the only one that I would recommend.
***Link to that suggestion --> https://addons.mozilla.org/en-US/firefox/addon/linkification/reviews/321220/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Here we go again! MEGA slow speeds during peak hou...

Hi folks,
I have noticed that during PEAK hours, my XBox Live sessions lag like a [insert expletive here]!
WHY, oh why do BT insist on throttling, nay, strangling their network to the point where it is totally unusable for anything more than basic browsing or sending/receiving emails?!?
I work reasonably long hours and only get two days off per week, so when I have free time, I'd like to game in a relatively lag-free environment, but right now, this isn't happening! Just tonight, in a game of MW2, I was experiencing such bad lag that shot registration was all but extinct!
I know that BT throttle P2P, but I don't use it and wonder why http and other protocols are being throttled as well!
A speedtest.net result:
And one from BT's own speedtester:
Come on, BT! This is NOT the service that I'm paying for and if it continues this way, I'm out of here when my contract ends!

Rottie wrote:
borley wrote:
Totaly agree with you mine has dropped more than 50% , you say your out of here soon as the contract ends i`m sure BT are breaking their contract so i`m sure you have rights to finish it early. BBC Watchdog here we come lol
Hi there,
Thanks for your reply.
As I understand it, BT are only in breach if the speed falls below the "acceptable speed" threshold in your profile, which in my case, is 12000kbps. Even then, I'm almost certain that BT would offer the *cough* "solution" of changing you from FTTC to ADSL.
Personally speaking, I think the issue lies with contention in the network, either locally or at a centralised point. Unfortunately, the only solution for this (other than throttling speeds to the point of being unusable) is to buy in more bandwidth from BT Wholesale, but that of course, would cut too deeply into BT's profits and in turn see us all paying more for next years' service.
What is the purpose in selling/supplying FTTC when the network infrastructure is clearly unable to meet demand? Using marketing ploys to create this artificial/false perception of what FTTC is, a "superfast fibre service" (partial fibre) then once bought by the consumer only to be told that there are restrictions to be applied is merely lying. Even though there is a FUP many of the constraints once the contract is agreed to, are hidden from the customer. Then again this is the case with most companies.

Here we go again...cannot update 10.0.0.1 via GPO

Per usual, I'm trying to deploy some of the patches released via the Adobe Gods and once again, things aren't working.
I'm a bit behind in updates just becasue of these issues. Everytime I try and update, I run into brick walls and it's always such a hassle I avoid it as much as possible anymore.
My new struggle is updating our existing clients from 10.0.0.1 to 10.0.0.3. I've downloaded both incremental patches (AcrobatSecUpd1002.msp & AcrobatSecUpd1003.msp) but get errors right away. When I try to apply the patch to our existing install I get the error message:
"The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch."
These are the commands I'm using:
"msiexe c /a AcroRead.msi /p AcrobatSecUpd1002.msp"
"msiexe c /a AdbeRdr1000_en_US.msi /p AcrobatSecUpd1002.msp"
I tried both AcroRead.msi & AdbeRdr1000_en_US.msi just in case something changed when I applied the AdbeRdrUpd1001_Tier1.msp update a while ago.
So again I'm flustered and confused and don't know where to go from here. I just wish this would be easier and not be such a headache every time I need to push updates down to the clients via GPO.
Would having a program like installshield or Wise or some other similar program help with stuff like this? If so then I'm going to definately start pushing my boss to approve the purchase of it!!!
Heeeeeeeeeeelp!!!

Ah, okay. We got an email here at work saying that 10.0.0.1 and 10.0.0.2 were vulnerable and to update to 10.0.03. So I went to the FTP site to see what was availiable and saw those updates. I didn't realize it was only for the other versions. My bad. Thanks for clerifying!
EDIT: Geez...I need to figure out what email is connected to what username and delete one of these things before I drive myself batty!
Message was edited by: ned4spd8874 (aka RevDrChris)

Noisy phone line, here we go again......

Hi, all,
I'm new here, so please be gentle!
We've been going round and round on this one for over a year, wonder if anyone has any new suggestions....
Basically, we have an intermittent crackle on our land line. Been going on for ages now.
We've had all sockets rewired and replaced, external cables changed, and the cable pair back to the pillar swapped.
Thing is, despite 4 or 5 visits, an engineer has never heard the noise. I've been onto faults and explained this to the nice lady in Bangalore, and all they can do is send an engineer, depite the fact it's obviously nothing local.
We had the same issue when we were with Virgin for phone service, which suggests to me (an old IT engineer) that the issue must be between the pillar and the exchange, but what do I know?
Apart from looking for coreallations with weather, time of day, phase of the moon and sunspot activity, I don't see anything else I can do to avoid some poor engineer arriving, running a quiet line test and leaving again.
Any suggestions?
Thanks, Phil

all you can do is persist with engineers until it is resolved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Here we go again - signal problems

After a relatively quite 2 whole months of solid service, two nights ago my signal started flaking out again. Back to a single bonded channel on upstream at 57 DbMv (so yeah, barely hanging on at all) and the infamous (unrelated but miraculously always occurs at the same time the Internet signal has problems) X1 unable to reach the server. Called in this a.m., and was unceremoneously disconnected after 8 minutes on hold waiting to talk to someone. I guess I have a new plan for the weekend - instead of getting any honey-do's done, I'll be trying to convince Comcast that there is a problem again.

mohoelx wrote:
Well nuts - that didn't last long! Internet blinked about dinner time, and we're back to the solid 57 dBmV on a single channel. Then of course, completely unrelated, the X1 went out (RDK 03032 untul power-cycled, then RDK 03004). Spent way to long on the phone testing, power cycling, etc. and the rep says need to send a tech "with equipment in case it needs to be replaced". Yeah, my two X1 boxes both died at the same time along with my modem... Why can't they update the script to address LINE problems? And of course, the earliest they can get here is Thursday. An hour later, the TV is back online ... do I dare power cycle the modem for the internet side again? Listening to the Royals on the 'net so, no, will power cycle the modem later. Frontier is coming out Friday. Can't wait to see if I can get solid service from them.
I did a few checks from our end and was unable to to see any clear drops in the pass 2 days. However, I did see a lot timeouts and drops on the modem up to late night the 8th. If nothing has recently changed the we do surely need to have a tech check this. We would hate to lose you as a customer and this should be something that can be addressed. I also checked the area itself and was unable to see any similar issues with other customers, because of this there is a big chance that the issue might be at the residence. A tech going out would be the best way to determine the source of the problem. -FC

And here we go again with corrupt download files unable to expand

There seems to be a pattern with major updates from Apple and the ability of the servers providing the content - be it iTunes or iOS or Mac OS updates - I have been unale to download sucessfully the larger updates but smaller (22MB for AirPOrt Utility) work fine.
The annoying thing is that in almost all cases the erorr dosen't occur until AFTER the download is complete - meaning it takes up allt he time and bandwidth etc with no result and you have to start all over again.
This has happened to enoguh people and with enough different software releases that I posit that it is NOT the result of any partiucalr configuration of netwokring and or hardware and or firmware and or OS version etc - but that the it is a systemic issue on the provider side of things.
Perhaps they (Apple's content providers) should stagger access or something - by time zone - or Apple should release updates over the course of a week - not all on the same day.
I would much rather get a message that the server is busy try agian later - or have one update a day - and have it work on the first try - that to waste time retrying the same downloads over and over again.

While it is entirely possible taht some combination of DOCIS or firmware etc on the user end is a contirbuting facotr - it is not hard to find numerous reports of exactly what I am talking about along with other similar issues.
I don't recall having this issue before I upgraded to 50Mbps download service - so there could be a connection there. But the "solution" in my case so far has been to just simply keep trying and eventually it works just fine.
I suppose I may have forggotten as they are so few and far between - but in my recollection - the ONLY issues I have had have been with software from Apple - whether downloaded via software update - or the App store - or iTunes - and no where else - on both Mac and Windows (had Apple Software Update fail to get iTunes update a couple times on Windows, but windows is easy to goof up if you have other installers running at the same time).
On the other hand I don't recall too many cases in the past where the downloads were so large as they are nowadays - and certainly the number of users after those downloads has only increased over time.
https://discussions.apple.com/thread/4010441?start=0&tstart=0
http://support.apple.com/kb/TS1813?viewlocale=en_US&locale=en_US
http://macmost.com/forum-software-updates-corrupted.html
https://discussions.apple.com/thread/3356863?start=15&tstart=0
http://reviews.cnet.com/8301-13727_7-57357319-263/dealing-with-corrupted-downloa ded-files-in-os-x/
http://forums.macrumors.com/showthread.php?t=1268440
http://forums.untangle.com/networking/8171-downloads-corrupt.html
http://forums.macrumors.com/showthread.php?t=970911
https://discussions.apple.com/thread/3378898?start=0&tstart=0
http://mybroadband.co.za/vb/showthread.php/287165-iOS-4-2-download-corrupted
http://stackoverflow.com/questions/7199094/what-is-the-cause-of-frequent-corrupt ed-incomplete-download-from-amazon-cdn-to-i
http://forums.macrumors.com/showthread.php?t=1292841
http://www.jailbreakqa.com/questions/39174/is-ios-download-corrupt
http://www.tuaw.com/2011/11/10/ios-5-0-1-now-available-for-download/
I could go on but you get the point.

Well here we go again another month same problem

Im really annoyed about this now it is every month since march the same problem.
Had the issue at begin of sept got engineer to come out 16th sept to fix the issue he tested everything in the house and there was no problems. He went to the exchange and reset stuff there telling me to give it to the 3rd October to settle down. So it settled at max achievable speed 2000kbps and my ip profile was 2000 kbps but my ip profile went down to 1750 on the 28th of sept.
Well today yip you guessed it my max speed is 500kbps and my ip profile is now 500kbps.
Im so fed up now as i will again have to wait for them to sort it out and then it will be ok for a couple of weeks with the max speed and ip profile going down till im back at 500kbps on each.
There has got to be something causing this, the quiet line test is clear, my hub is wired direct to the wall socket that has an inbuilt filter in it.
the noise level has gone to 13.3
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 06:52:15
Downstream:
1.906 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
13.3 dB / 18.0 dB
Line attenuation (Down/Up):
57.2 dB / 31.5 dB
Output power (Down/Up):
17.2 dBm / 11.9 dBm
FEC Events (Down/Up):
40957 / 11
CRC Events (Down/Up):
719 / 15
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
4752 / 3
Error Seconds (Local/Remote):
97 / 5
FAQ
Test1 comprises of Best Effort Test: -provides background information.
Download Speed
442 Kbps
0 Kbps
500 Kbps
Max Achievable Speed
Download speedachieved during the test was - 442 Kbps
For your connection, the acceptable range of speeds is 50-500 Kbps.
Additional Information:
Your DSL Connection Rate :1952 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
If you wish to discuss these results please contact your ISP.
If you are experiencing problems with specific applications, servers or websites please contact your ISP for assistance.
Your test has completed please close this window to exit the performance tester.

Hi adam_ant16
I am sorry you are having trouble with your broadband, would you be willing to give the Mod team a chance to fix this first? I'll be happy to get involved and make sure we get everything sorted out for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Well here we go again with the Usage

I've had problems in the past with the meter saying my son and I were using 90gb a month. I finally got the matter resolved with the help of Sean via here and the overpayments were refunded and things settled back down again. That was last year.
I've had odd spikes from time to time but its been fine, in fact we have (according to the meter) been using on average about 25gb a month (I'm on a 40gb usage limit). So I stopped checking religiously every day - after all, it was back to where it should be given we dont stream movies, watch iplayer, all the things we are told just simply EAT the usage.
Then last month I received an email to say we had gone over 28GB!! The remainder of the month I was checking daily, we scrapped in with less than 2GB left by 31/10.
So now I am back to checking the figures every morning and guess what... I don't believe them again.
0.66        1/11/14
1.57        2/11/14
5.24        3/11/14
I've used over 5GB in 3 days? And more to the point I used 3.67gb yesterday??I am so not a happy bunny today.

Hi adam_ant16
I am sorry you are having trouble with your broadband, would you be willing to give the Mod team a chance to fix this first? I'll be happy to get involved and make sure we get everything sorted out for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Here we go again - software update available (not)

I have struggled with this for over a year now. App Store on my MacBook Pro shows an upate available - but there isn't actulaly. It all starts with a flag on the icon in the dock - but when I click on it, then the software updates tab - it will spin and spin, then show nothing (but still say there is one update availabe. Once this behavior begins, it is only a matter of time (usually days) until it will show that there is an update available, and again clicking on it, then the update tab, brings me to the page, but will show a piece of software (for me - it is ALWAYS Twitter app) - and shows that it is installed already (see window capture).
Over the last year, I have done more things than I can remember to make it quit this - from deleting Twitter, then installing it again through the App Store. That doesn't remove it.
I have deleted the App Store prefs... no effect.
I read on another similar thread of resetting the App Store - and followed those directions, which ended the bad behavior for a few weeks, only to return.
In my most recent reappearance of the issue - it showed 1 Update for just over a week - but no actual software listed... until yesterday when there was an update that involved Java. I had it update that... and then Twitter showed up (though it doesn't actually need updating).
Apple is losing its "user-friendly" reputation for many reasons - and bugs like this reflect just one of them.

Hide Updates
Hide Updates (2)

Here we go again...autorouter getting worse!

I doing a tight quarter remote wireless controller and it can't get to 100% as usual.
This problem was supposed to be fixed in 8, 9, and now 10.....the autorouter shapes are not passing from UB to the autorouter!!!!
Example, I'm using square pads in the pcb design but the router is showing and routing around ROUND shapes.....this is something tien and braulio put in as a bug even during BETA stages......why is this problem STILL around!
Router can finish because the shape passing still is as it should be and these parts are taken from the master database!!
Solutions?
Signature: Looking for a footprint, component, model? Might be here > http://ni.kittmaster.com

Chris,
Ok, I checked the file, and I talked to R&D... I will post this same message also in your other post.
So, there are two issues here that I will note separately...
1. Turning square pads into circular pads "during" routing is a cosmetic issue only, it is fixed in our internal build and is on hold to be verified on our next update or release (you can reference this report with us in the future with ID 105795). Once you finish routing, the pad shape returns to the original square. Internally, the autorouter never changes the shape for the pad, is only the graphics engine that is drawing the shape for you to see it on screen while is routing.
2. DRC errors when finished. This is independent from the shape problem you see, and has to do with the autorouter itself overriding clearances when routing in some places. R&D is actively working to improve the autorouter and avoid this, currently you need to manually move the trace where a DRC error shows up after routing.
This is the status update on these issues...
Nestor
National Instruments

Here we go again. Need some help please.

Had a lot of probs with first m/b. Finally got them to RMA it at gameve.com now the m/b seems to be acting right but when trying to install windows XP I keep getting BSOD. It has happened like 4 times. Anyone here know a work around for this? I have been trying to put this rig together for a month now and keep running into crazy problems. Any and all help will be appreciated.
Thanks.
-Roll
Oh yea, the specs are:
K8t800
3200+ 64
3200 mushkin black level 2 (1 gig, only trying 5122 atm)
Cant remeber the name but a solid 530 watt psu.
saphire 9800 pro.
Maxtor 80 gig 7200 rpm HDD

he ASCII standards say that the If the FSB can't handle the Memory speed than the CPU operates at a slower rate to try to best accomidate the Bus size. Think about it. The bus gets to much info and the cpu gives two little, which will lead to low efficiency and really serious heat issues. The RAM gets hot, data gets lost, the data times out in RAM. Try replacing them. I know it's a pain in the ass but I've had loads of RAM problems on even slower machines. Might work. Computers have their way of being a pain in the ass.

Here we go again...restore and upgrade

hi. checked all over here and did everything...in a nutshell...
bought new 32g ipt...gave 16g to my daugher, who is on my macbookpro under her own account, but same itunes account, machine is authorized.
i purchased the jan software upgrade on my imac. i copied the ''mobile application'' file to her laptop.
i plugged in the 16 gig with the upgrade to her library and did a restore. all went well except no upgrade apps.
i have not plugged in my new 32 but am concerned it may not have the new apps either.
so am i stuck paying THREE times now for the apps??
any new answers out there??
thanks everybody/anybody!

before you buy it again, and assuming you have moved the authorization key and you are using the same iTunes account to sync the apps that you used when you originally bought the apps, try downloading and installing 1.1.4 one more time, then go into iTunes, go to the Store menu and Deauthorize this computer then Authorize it, again using the Apple ID and password for the account that was used when originally purchased, then resync.
It that does not work, go to iTunes Store support and relate your problem to them.

Here we go again. 601bt issues

Similar Messages

Maybe you are looking for