Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.
Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.
Hi I have just got back from the apple store and the guy at the Genius bar looked at it and said it was a manufacturing fault, and because it has been like it since new, and seemed to be getting worse he replaced the computer and I have a new warranty from today.
We got the feeling as soon as he looked at it that he has seen this before, I did say to him I was concerned it would be a replacement screen and I was not really happy about that as it was so new, and he said that was the normal procedure, but as the fault was already there at new and it was getting worse they would replace. I could not have asked for a better service.
Not unpacked this one yet but am hoping all is good, its a great little machine.
Thank you for your responses, and I hope this might help someone else. One thing it did not seem to be missing pixels but something to do with the screen production?
Similar Messages
-
I update my device and asked me the Claude and I do not know what is the solution please help me
I update my device and asked me the Claude and I do not know what is the solution please help me note that the issuance of the two is the seventh kind iPhone 4 Q and serial number is 01******343
Please help me
<Edited by Host>Assuming that you mean iCloud (I don't know what you mean 'issuance of the two is the seventh kind'), then when are you being asked for it and is it your iCloud account's password that you are being asked for or did you buy the phone second-hand ? If it's a used phone and the previous owner left it linked to their account then you will need to contact the previous owner, only they can remove it from their account : http://support.apple.com/kb/TS4515
-
I have several Mac Book Pros that I am responsible for. They will no longer recognize the camera in SmartBoard and in Smart Bridgit since updating to 10.8.5. One of the machines is even running 10.9 and it still won't work. I have teachers who are very frustrated because they wish to use the Bridgit Software in their classrooms. Skype appears to be working fine. It is just the Smart Board Software.
Hey there MelAllen,
It sounds like you need help troubleshooting the built in camera on some of the computers there. I want to recommend the troubleshooting steps outlined in this article named:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
Thank you for using Apple Support Communities.
Regards,
Sterling -
My mac mac book pro w retina display will not go to sleep when I close the lid or put it to sleep.
My mac mac book pro w retina display will not stay asleep when I close the lid or put it to sleep.
I put the computer in my bag and when I open it again the machine is so hot I can almost not touch it.
I am affraid that the hardware is allready fried.
Also when I press a key to restart after it has been idle for a few minutes it often takes up to a minute to wake back up.
This machine is bran new..
What should I do?Try a SMC reset:
http://support.apple.com/kb/ht3964
If no success, then use your warranty and bring it in to the nearest Apple repair facility for rectifying this problem.
Ciao. -
Cannot charge the mac book pro after updated with Lion mountain patch.
Yesterday , i updated to Lion mountain patch, I am not sure what the version is. But after that i dont see the laptop is getting charged.My battery completely drained off. I dont know how to resolve this issue.But i am not sure because of the "update" only it happened.Is there any way to charge up the lap ?
any help is much appreciated. Thanks..I just plugged in the charger after 10 hours. Now , eveything looks good.
Mysteryyy!!! Woohoo! -
I forgot the password to Alamil two iPhone after the update and asked me Alamil password forgotten who helped me please imei:013437002878493
I forgot the password to Alamil two iPhone after the update and asked me Alamil password forgotten who helped me please imei:013437002878493
iPhone 5, iOS 7.0.6 -
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?
Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton -
i installed the window 7 ultimate OS in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume mac mac os x?
Assuming that you tried to install Win 7 in bootcamp.
Power on the machine and press and hold the "option" key when you hear the bong sound.
Select the Macintosh HD icon and press "return" or just click on the icon.
Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD. -
Help I tried opening my Mac book pro after shutting it down but it won't open and all I get is a grey screen and a mo Jong mouse but nothin else so can u help me ??
Hey HJA96,
Thanks for the question. I understand that your MacBook Pro is booting to a gray screen. The following article addresses this symptom, and provides relevant troubleshooting information:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Some of the steps included:
- Disconnect, test peripheral devices and network cables
- Perform a Safe Boot
- Reset the NVRAM / PRAM
- Start from your Mac OS X Install disc; use Disk Utility
- Check your cables and power source
- Remove third-party RAM and internal hardware
- Perform an Archive and Install installation of Mac OS X
- Perform an Erase and Install installation of Mac OS X as a last resort
(See article for full information on all of the above)
Thanks,
Matt M. -
i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you
Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]] -
Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?
Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-) -
I've recently downloaded CS4 ( Illus. Photoshop, and Indesign) on my Mac Book pro. Only these apps appear as low resolution. All other imagery, text etc... appear fine on my system. How can I correct the pixelization of the Adobe products?
No. If you want full compatibility with that display for all Adobe apps you’ll need to move to Creative Cloud.
-
Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as
Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense. -
My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??
i plugged it and pressed the home button for a few seconds. the connect to itunes screen appeared and the moment i disconnect the cable from the electric plug, it switches off. when i connect the cable to the PC, nothing happens, its as if nothing has been done.
Maybe you are looking for
-
Tax Form Scoots to Right When Saved
After downloading a 1040 PDF form from the IRS website and then do a Save As within Preview the whole form scoots to the right, some content going off the page. Does that do to some for you or is it my machine? OS X: 10.4.11 Preview: 3.0.9 Thanks!, W
-
I created a QR Code using InDesign's "Generate QR Code" feature and would like to incorporate QR codes into our company's business card design. That said, I don't want the code to be more than 0.75" – otherwise it takes up too much space on the card
-
What can a server allow me to do?
Hi guys How can I assess information on my server via a different network? I have a Mac Mini Server but haven't set up yet. Will I be able to assess info on the server at work for example? I was told that I must have a static ip and set it up this wa
-
After reading general info (5 pages of A discussion on the ARD function and A link to another web site addressing the security risk of the remote desktop function) I clicked on "branches of to new discussion" and got " Unauthorized, Access to this pl
-
I need a scanner compatible with 10.9
MAC OS 10.9 does not read/connect with my Canon LiDE 50 scanner. I shopped around to buy un updated scanner and couldn't find one that is compatible with 10.9. Please advise Fernando