Hi all, it is Monday, M-o-n--d---a-----y...

I see code on monday
like a haystack within many screens of monitor,
I see code on monday
if 10 cups of coffee can wake me up
I see func specs on monday
like I am trying to read a 3000 page of a book
I see func specs on monday
if 10 cups of coffee can wake me up
monday, monday,
i switch on my notebook and I log in
monday, monday,
I wish is Friday...
something for everyone who is starting their Monday ... all the best!

>
Jen Yakimoto wrote:
> Positive things about Monday: Check mails, Meeting , and more importantly ... still have job !
>
yes Jen, agree that we still have our jobs...

Similar Messages

HT204074 I have an iphone 4. I upgraded to ISO6. All well until Monday. I was updating 2 Apps over Wifi which froze. I tried to do the soft reset and now my phone has frozen totally. It will not go passed the Apple icon sign on start up. I drained the bat

I have an iphone 4 and upgraded to ISO6. aLL WAS WELL UNTIL mONDAY WHEN i WAS UPDATING 2 aPPS AND MY PHONE FROZE. i TRIED SOFT RESET AND THEN MY PHONE HAS NOW FROZEN ON THE aPPLE icon and I cannot go further. I cannot sync to pc as my phone is not recognised. Hlep!

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

Help, I cannot connect to the internet via airport with either my Imac or I-Pad. Connecting via ethernet works okay for Imac. I can connect wirelesssly with my windows laptop. I have reset my router, created a new network. It was all okay on Monday

Normally I have my IMac, I-Pad and Windows Laptop all working on my home network via wi-fi. This week I find that I cannot access the inetrnet on my IMac or I-pad via wi-fi but I can connect to the internet via wi-fi with my windows based laptop.
The airport diagnostics (reds/yellows) indcate that I am connected
I can access the internet if I plug my IMac into the router via an ethernet cable
I have restarted the IMac and the I-Pad, rebooted the router and created a new network. None of these changes has made a difference. Does anyone have any ideas please?

You have not completed your profile so we cannot assist you. In your profile you will indicate critical information such as what version of OS X is installed on your computer and the computer's configuration. If you do not know how to complete your profile please click Profile Update

Ical: printing i.e. all mondays within a given timeframe?

hi there, i wonder if it is possible to print out all i.e. mondays within a given timeframe. i'd like to handout that to my students. could not find anything ... thank you for your help in advance. michael.

littlegreenmen13
I recently received help in this forum from KOENIG Yvan and WWJD regarding a spreadsheet for my pilot logbook. In one table I have my daily flying, and in another I wanted a summary of only the flight hours for a given month. I want to track how many hours I fly from month to month.
To do this I created a separate column (and later hid the column) which I titled "Month Cat" where only the month and year are extracted from the "Date" column.
This is the formula I used in Month Cat
=MONTH(A)& " "&YEAR(A)
For the monthly totals I had the table look for the appropriate match in "Month Cat" then total the flight hours from the "Duration of Flight" column. This is the formula I used to total the flying hours for the month of May.
=SUMIF(Logbook :: Month Cat,"=5 2008",Logbook :: Duration of Flight)
What I thought you could perhaps do is create a similar column to my Month Cat, except have it also extract the Day. Perhaps it would look something like this
=MONTH(A)& " "&DAY(A)& " " &YEAR(A)
Then use the SUMIF function to total the data you need from the appropriate dates. You say you have 13 weeks of Data, it does seem a bit cumbersome to sort through the particular days you need, though not impossible and perhaps it helps.
My ultimate disclaimer here is that I am very new to Numbers (and spreadsheets in general) so I might be totally missing a very important reason for not doing this. But maybe it'll help.

MDX query - need to run different query (where clause) on mondays

The below query works OK and uses the substitution variable CurrentWeek in the WHERE clause, but I have one shortcoming that I need your help for:
The query works fine for all days but mondays. On Mondays I need the query to fetch numbers from last week (as opposed to current week) as the query returns null as the cubes have no data for current week on mondays. Hence I need to change the where clause to use substitution variable LastWeek, or in some other way run a different query on mondays. I have another substitution variable called WeekDay which I can use to test which day of the week it is, but I am not sure of the syntax I need to use to test for day of week and then have the query use different substitution variables as a result of this test.
Please help.
Henning Strand
SELECT NON EMPTY {[Measures].[meas_sg]} ON COLUMNS,
NON EMPTY {[Kunde],[Kunde].[KU01],[Kunde].[KU02],[Kunde].[KU03],[Kunde].[KU04]} ON ROWS
FROM MIFS.MIFS
WHERE ([Marked].[Dagligvare],[Tid].[&CurrentWeek])

Or to go off of Sean's suggestion, programmatically change the value of the substitution variable, and leave the code alone.
Other thoughts -- have a load process to a single cell (sorry, my BSO roots are showing, but the concept is the same, load a single number) and then do a boolean test off its value -- 0 = Monday, 1 = the rest of the week.
Regards,
Cameron Lackpour

Adobe Store takes too long to deliver download and serial information

Earlier this week we received some Indesign files for a job, but they were in Indesign 5 format, so we were unable to open them with Indesign CS4. So, taking this as a sign that it was time to upgrade, yesterday, at around 1pm UK time I purchased the upgrade from Creative Suite Design Premium 4 to Creative Suite Design Premium 5.5. I logged onto the Adobe.com store, looked at the options - Home and Home Business, Small and Medium Business, Eductation and selected Small and Medium Business (because that is what we are). I purchased the upgrade (as a download), received a confirmation email from Adobe and waited....and waited...and waited. At the end of the day I called Adobe Custopmer support and asked why I have not had any email showing links to download sites, and serial numbers. I was told it can take 24 hrs to process the order.
Well here we are over 24 hrs later and I have still not had any information from Adobe. I tried calling the customer support and it is only open between 9am and 5pm Monday to Friday. The customer support website is down. The Adobe Volume Licensing site is down - and was all day yesterday as well.
In the meantime I have no way of opening the files. My deadline is Wednesday and we had planned to work on the job today and tomorrow (which is why I am sitting in my office now). It appears I cannot access customer support before Monday morning, and the customer support website is down until tomorrow evening UK time - at least. This means working all night on Monday and probably Tuesday - assuming we get access to the download information early Monday.
Adobe is one of the biggest software vendors in the world. When I buy software - online and for download, with a credit card - I expect to be able to access the software immediately. There is no excuse for this delay. None. A business the size of Adobe should not have customer services down for 2 days. Support should run 24/7, 365 days a year. My enquiry yesterday was routed to an offshore call centre, so having a 9 to 5 cut off is simply ridiculous.
The simple fact is that even the smallest software vendors we buy from deliver the goods within minutes. As you can tell I am mightily "annoyed" by this. At this point in time I am wishing these files were in Quark Xpress format (we have both). Quark used to have terrible support but they are now very good - and available.
As a customer of Adobe for over 15 years I am disappointed. Today, in my email inbox I have emails from Adobe about new online cloud services. Well, why would I want to invest any more in Adobe software if I cannot even access the ones I have bought - quickly?
If companies like Adobe want to know why piracy is rife - look at your own delivery systems. The only option I have now to do this job is to either download a pirated version (which I will not) or to download and run the trial for Indesign. How stupid is that?
Apologies for the rant.

ProDesignTools wrote:
Kevin Quigley wrote:
... selected Small and Medium Business (because that is what we are). I purchased the upgrade (as a download), ...
Well here we are over 24 hrs later and I have still not had any information from Adobe. ...
In the meantime I have no way of opening the files. My deadline is Wednesday ...
Hi Kevin, not sure why it's taken longer than usual, but you can just download the free trial in the meantime. It will work 100% for 30 days, and you can convert it over to the full version once you receive your permanent serial number without reinstalling. This is fine even with a business license.
There's really no reason not to proceed in this fashion, especially with an imminent deadline. Adobe recommends this in cases where there is any sort of delay (for example, student validation) or immediate need. And absolutely you should avoid downloading the software from anywhere else, which is not only illegal but also hazardous to the health of your computer (malware).
Hope this helps!
Acrobat has never had a Trial for Mac. Probably never will.

Cant join PC to domain and not able to send emails

Hi
I'm having a few issues with a SBS 2011 Standard server. To give you a setup overview
Server x1 (SBS 2011)
Workstations x6 (4 running Windows 7 Pro and 2 running Windows 8.1 Pro)
The server is used as domain controller and exchange. It doesn't host the web domain - emails are directed via a pop3 connector to exchange accounts
Main use for server is file sharing, domain control and exchange
The server and workstations connect into 8 way Ethernet switch
This switch is then connected in BT 2wire business hub
The LAN ran from 192.168.0.69 (server) to .70, .71 etc while BT hub was 192.168.0.253
OK now the problem.
Everything was setup and working fine until BT decided to block the IP from web. BT said to factory restart the hub which we did. This fixed the internet to hub but screwed up the LAN. The new hub IP was 192.168.1.254 so the LAN was moved from 192.168.0.x
to 192.168.1.x
The first issue I am having is that I cant join a new pc that was rebuilt to the network. I have tried joining via right clicking my computer and changing domain, but when I enter in the domain and admin password it says it cant find the domain?
I then tried the http://connect but that just loaded a blank page. I'm struggling as to how to connect this pc now. I tried to change the DNS on pc to the server LAN address but that didnt work either. I'm not sure if the domain controller is working or
if its another issue?ow.
Also on the pcs that are still connected, every time they login the mapped drives to the server dont open. the user has to try to open the drive and then enter in their username and password to open the drive. The drives are all shared correctly and this
is only happening now.
The 2nd issue I have is unclear as if its still a BT issue or not, but when a user tries to send an email the get an instant bounce back saying
COL004-MC1F51.hotmail.com gave this error: OU-002 (COL004-MC1F51) Unfortunately, messages from 86.XXX.92.XX weren't sent. Please contact your Internet service provider since
part of their network is on our block list.
This happens on a number of emails not just hotmail
When I checked that IP on the spam networks it had no record of it being blocked.the server has internet access ok and can receive emails fine, just not send them.
I dont know it both issues or connected or not.
would anyone have any ideas on what to try? first issue is getting this pc on the network. have been told that it needs all sorting for Monday morn, so any quick advice would be great.
thanks for any input

Hi,
Could you please share the IP Address of the server ?
Make sure the server is set to Static IP Address. With one NIC card enabled. DNS IP should be pointing to the server IP itself.
On Client machine assign an IP address and make sure the DNS is set to Servers IP Address.
Once that is done , Try to ping the server.
Also ping connect from the client machine , Connect should show servers ip address.
Keep me posted.
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd

ICal not indicating final day of event by a placing a dot in month view

I consider this to be a bug:
on my iPhone 5, in month view, when I input a multiple day event, there are dots everywhere indicating that something is occurring that day. However, the last day of a multiple-day event, no dot appers.
For example:
If I have an event from Friday at 8am to Monday at 5pm, all days except Monday are dotted. This is clearly not functioning as intended.

I consider this to be a bug:
on my iPhone 5, in month view, when I input a multiple day event, there are dots everywhere indicating that something is occurring that day. However, the last day of a multiple-day event, no dot appers.
For example:
If I have an event from Friday at 8am to Monday at 5pm, all days except Monday are dotted. This is clearly not functioning as intended.

My iPhone 3GS is no longer able to send pictures via text??

I've done a total phone reset, taken it to the ATT store (they checked all the MMS settings and they were correct), sync'd it to itunes and downloaded all updates...but still can't gte it to send pictures via text?
This all started last Monday when I traveled out to las Vegas...every picture I tried to send would get the status bar about 95% across on the send before popping up a red exclamation point next to the picture that gives me a "message failed to send" error. Here's a screen cap:
[IMG]http://i21.photobucket.com/albums/b270/firebird1999us/securedownload.jpg[/IMG]
Any ideas?

I had same problem. Check your Settings/General/Network/Cellular Data Network - make sure your MMSS has 2 // After http, ie, http//... If you have to change this, make sure you switch iPhone off and restart after 20 seconds, go back to your settings to make sure changes have stayed put. Then take a photo and MMS it to yourself, this will take a minute or 2 to go through.
Hope this works for you

Can't receive emails with Sympatico

I have 2 email accounts with Bell Sympatico. The owner account is functioning fine; the 2ndary account no longer can receive email, but can still send. I get a message saying
"the POP server POP6.sympatico.ca"rejected the password for 'b1...' please re-enter your password or cancel."
I can still send emails, and interestingly, I can access the mail from this particular account with the webmail at Sympatico/MSN. I have changed NO settings; all I did Monday was to upgrade from the old 'getEmail' to the new one with more storage (MSN/Sympatico). I've tried POP1, POP2, POP3, you get the idea. Nothing. tried their other suggestion of:
8. Under My incoming mail (POP3) server, type in : pophm.sympatico.ca
9. Under My outgoing mail (SMTP) server, type in : smtphm.sympatico.ca
(In spite of me making it painfully clear I was on a Mac with Apple Mail, I got suggestions for Outlook, etc...) sigh
I've talked to sympatico on the phone (from India...)tried their suggestion. Nothing. Should I delete the account and re-create it?
I am tearing my hair out. Yes, there is that clumsy webmail workaround, but I want things to work properly, and the Sympatico worker bees are 8000 miles away...Suggestions?

I know that Sympatico have 2 type of e-mails:
the "old ones" that have the same settings since Sympatico started 10 years ago. Here are the information would need to setup your Symaptico e-mail in Mail:
Username: b1**##
Password: access password
Incoming mail (POP3): pop6.sympatico.ca
Outgoing mail (SMTP): smtp1.sympatico.ca
Port server 25 for Outgoing (SMTP)
Port server 110 for Incoming (POP3)
The other Sympatico e-mail is the enhance one with MSN. The settings are differents and the authentification is different. Any new Sympatico accounts since June 2004 are on that new plaform. Here are the information would need to setup Mail:
Username: [email protected]
Password: e-mail password
Incoming mail (POP3): pophm.sympatico.ca
Outgoing mail (SMTP): smtphm.sympatico.ca
Verify that your server is set to requires anthentiation with agin your Sympatico e-mail and Sympatico password;
Both servers, Outgoing and Incoming, require a secure connection (SSL)
If you are not sure witch is what try to login online at: http://www.sympaticomail.sympatico.ca it will tell you if can upgrade to new enhance e-mail or if you sign in like a Hotmail account if you are already enhance.
I hope this help....
Cheers

How hard is it to order Infinity?

I'm a new customer to BT and already frustrated.
I got my BT Total Broadband Option 3 all activated on Monday 17th Sept (last week) and all has been ok, all setup and internet working.
However as my cabinet went live with Infinity just before my order completed, I thought Ill order this week. So I did online on Wednesday 19th, all seemed to go through and I picked my install date etc
Heard nothing today so called BT who said they order isnt going through because a password I picked was too long...Ok sorted that they cancelled the order and I re ordered online again, picked an install date etc.
Gave it an hour and checked "My BT" which shows I have a new order of BT Total Broadband 3 which is getting activated today. I already have this so Ive no idea why BT thought Id need it again, called BT and got it cancelled off and told it could take 24 hours to cancel.
So Im wondering why it seems so hard to upgrade my broadband to Infinity
The email I chose when I orgininally signed up to BT a few weeks back doesnt work either, after a number of calls assuring me that it should work, it doesnt, it says it doesnt exisit as a btinternet.com address
Wheres the best place I can contact to sort all this out properly?

you need to go back to the sales team on 0800800150
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

How to pivot multiple columns

Hi,
I am a newbie in t-sql and i am stuck with pivoting multiple columns. Any help is greatly appreciated!.
My input table:
Storeid
ProductID
Location
Sat qty
sun qty
Mon qty
Sat Sales
Sun Sales
Mon Sales
123
1
IL
5
6
2
120
88
200
333
1
GA
2
3
8
200
120
80
456
2
CA
4
7
3
50.5
93
300
I want to achieve output as below:
Day
StoreID
ProductID
Location
Qty
Sale
Saturday
123
1
IL
5
120
Saturday
333
1
GA
2
200
Saturday
456
2
CA
4
50.5
Sunday
123
1
IL
6
88
Sunday
333
1
GA
3
120
Sunday
456
2
CA
7
93
Monday
123
1
IL
2
200
Monday
333
1
GA
8
80
Monday
456
2
CA
3
300
Please help me in writing t-sql query to get above output. Thank you !

this?
SELECT 1 AS dayNo,'Saturday' AS DayName,Storeid,ProductID,Location,Satqty AS Qty,SatSales AS Sales
FROM table
UNION ALL
SELECT 2,'Sunday' AS DayName,Storeid,ProductID,Location,Sunqty AS Qty,SunSales AS Sales
FROM table
UNION ALL
SELECT 3,'Monday' AS DayName,Storeid,ProductID,Location,Monqty AS Qty,MonSales AS Sales
FROM table
ORDER BY DayNo,Storeid
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

ITunes 7 Podcasts grayed out and unchecked

Can't figure this at all. I have podcasts set to download manually and Shuffle set to not autoload. I installed the upgrade over the weekend and all worked on Monday as expected.
Today I manually downloaded podcasts and they show as grayed out with no checkmark. I can't listen to them nor transfer to the Shuffle.

I also have the same issue- on occasion, when I open iTunes, and go do something else, then come back a little later, this issue tends to show up.
I have a substription to a podcast that requires a password- that box always pops up first- I think, but am not sure that this problem occurs when the box asking for the password isn't acknowledged right away.
Those podcasts not requiring passwords all appear to have downloaded, but are gray [instead of black], have no checkmark, can not be played in iTunes, but are in the appropriate podcast folder AND can be played locally by WinAmp.
Does anyone have any answers?!?!?!?!?!?
mediocre PC Windows XP Pro >2GHz

Partitioning by days of week

Hi,
How would you partition a table with a DATE column (DD-MON-YYYY) by days of the week? Therefore, all data for monday in one partition, data for tuesday in another partition and so on.
Thanks!

In Oracle 11g, there is now support for virtual column based partitioning. So you should be able to add a virtual column to your table and have that use the to_char function to extract the day of the week -
day_of_week AS TO_CHAR(my_date,'DAY')
Then, you should be able to just use range or list partitioning on this virtual column to create your day of the week partitions. The ILM Assistant only supports partitioning by DATE columns, so this partitioning scheme would not work with the Assistant.
Adam

After Feb 2015 CU viewing list items results in error : requested registry access is not allowed

Hello All,
We recently (Monday) updated our farm to the feb 2015 CU. Since then we have been getting calls in from users that cannot access list items. They receive a correlation error. Looking at the logs the correlation error points to a critical
error: "Requested registry access is not allowed"
Doing some googling, others have seen this error but it is usually associated with managed accounts.
Has anyone else encountered this issue/error? Have you found a solution?
Thanks for your help
environment: SharePoint 2013 enterprise : 6 farm servers : OWA : project server : SQL 2012 always on backend

This would be the service account running the Web Application failing to access the registry key(s). What you should do is set up
Process Monitor to look at Registry keys, and look for ACCESS DENIED.
One thing you could just try out would be to run:
Initialize-SPResourceSecurity
Also, do you mean the March 2015 CU?
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Hi all, it is Monday, M-o-n--d---a-----y...

Similar Messages

Maybe you are looking for