Hi. Deeeep trouble here. I get overload (only 1 core working, it should manage easyly though anyway) with only 1 audio instrument playing. No other things in arrange. iMac i7 2.8, 8gb. Newest Logic Studio. Plz help, guys.
Hi. Deeeep trouble here. I get overload (only 1 core working, it should manage easyly though anyway) with only 1 audio instrument playing. No other things in arrange. iMac i7 2.8, 8gb. Newest Logic Studio. Plz help, guys.
TimboDJ wrote:
Right people, I really hope you can help... here's the story:
I produce with a friend and approx 4 months ago we both upgraded to brand new MacBook Pro's each and Logic Pro 9 each.
I bought a 13" MacBook Pro with 4GB and the 2.53Ghz Intel Core 2 Duo processor.
He bought a 15" MacBook Pro with 4GB and the 2.66Ghz Intel Core i7 processor.
We both have bought the full version of Logic Pro 9, both done the upgrade to 9.1 and have both set our copies of Logic to 64 bit.
Why? The only advantage you have from 64 bit is that Logic can use more than 4 GB RAM - which neither of you have. I would strongly recommend setting Logic to 32 bit. On both Books. It might alleviate some or even all the problems - I hope.
Here's a list of unavailable features in 64 bit mode:
http://support.apple.com/kb/TS3171
My friends copy of Logic on his Mac is so buggy its sometimes unusable.
My mate is about to throw the **** thing out of the window and buy Cubase!
More often than not it is hard to install new software on computers that have been thrown about.
Can anyone shed any light please??
I think 32 bit is your answer. However, the mobile i7 processor does at least have one issue with Logic:
http://discussions.apple.com/message.jspa?messageID=11460744#11460744
(same topic, summary)
http://discussions.apple.com/message.jspa?messageID=11525406#11525406
regards, Erik.
Message was edited by: Eriksimon
Similar Messages
-
I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
ChrisMichael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David -
Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?
The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion. Use the program Pacifist to install it.
-
i make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!
What you could do now is break up your video into smaller parts and render them out, then assemble them again as a whole.
I know this is not the best fix, but it might work.
You can duplicate an edit in the main screen, then delete the last bits and export,
do the same for the other half.
Then import the two bits (or more if you need) in a new edit.
Out of curiosity, can you post what format the video is in?
Copy a video straight from the camera to your computer.
Open it in Quicktime player, and with out playing type Apple + i
or Control + i for PCs
It should tell you lots of info about the video, and might help us to see what is wrong.
This is what it looks like: -
I have i phone 3g with 4.1 os. In that i am not able to download what app and facbook. plz help me
I have i phone 3g with 4.1 os. In that i am not able to download what app and facbook. plz help me
Unfortunately, these are the requirements
Facebook Requirements: Compatible with iPhone, iPod touch, and iPad. Requires iOS 4.3 or later.
WhatsApp Requirements: Compatible with iPhone. Requires iOS 4.3 or later. -
Right,
So i've upgraded to MAC OS X Lion to find out that Logic Studio 8 no longer works, so I tried to downlaod Logic Studio 9 but no serial would work.
So I found online that a guy figured out how to open Logic Pro 8 with OS X Lion from going through some way of doing it so I uninstaled Logic 9 and have just tried to instal Logic Studio 8 again, only to find that the new operatin system doesn't even let me launch the installer anymore.
I now have two options. To buy Logic Studio 9, or try and figure away around it.
My friend has all Logic Studio 8 on his mac, is it possible that if I found out all the different files that Logic Pro 8 needs to function and copied them off his macbook onto mine into the correct places that Logic 8 would work??
Please help with this, really desparate to get this back up and running as I use Logic live in my band and have a gig this saturday!
Thanks.it was a long shot to get it, just think it's a joke to ask people to spend another £166 on Logic 9 just because that operating system doesnt support it, it should support all versions but hey, it's another way of making money.
i have been looking but haven't found an answer as yet, very frustrating.
another way i've found is to just reboot my mac bac to snow leapord factory settings, but i don't have the discs for snow leapord. -
Bsod Problem, Bios Related?? ati2cqag.dll?? Plz Help Guys
well i have quite a problem here and i dont know if the bios is related to it.
my specs are:
msi k9ngm-l (V3.7b1 bios)
amd 64 x2 5600+ (2.9ghz)
4 gb ram (though i see only 3 because of xp)
radeon hd 4850 512mb
for about 2 weeks im having wierd bsod during gamming but usualy its when i quit a game, before it gets back to desktop it will bsod. when i get the bsod it says the cause is FAULT_IN_NONPAGED_AREA and related to ati2cqag.dll
ive updated my graphic card driver, didnt help, downgraded version of driver, didnt help, i must point that one of the "uninstall" drivers went wrong and gave me some trouble but ive cleared all the files, registry keys and installed again new drivers. the bsod didnt stop. ive then tan memtest for 4 hours, no faulty ram according to it. i can play fine, no drop in frames its normal, its just crashes randomly.ive stressed the gpu and its fine. ive searched for answers but cant find the problem. any help would be great. thanks in advanceDo memory check with >>Memtest86<<
List PSU brand with details, look over PSU sticker.
"amd 64 x2 5600+ (2.9ghz)
4 gb ram"
That's 2 or 4 memory sticks? -
Updating logic studio 8 - help needed!
Can anyone cleverer than me help me with a problem?
I bought a second hand mac book pro and it had a copy of logic pro on it that when you opened it asked for the serial number. I had logic plat 6 on my previous mac and I bought the update to studio pro 8, installed it with the xs key in and it all seemed to work fine until i did a software update and tried to launch it again. It just came up asking for the serial no as before which the upgrade version doesn't have on the packaging. I then have to reinstall which again works until i try to update.
I have tried:
uninstalling logic using appzapper before reinstalling.
entering the serial no that is shown when the app is opening up.
running update with the xs key in.
none of these have worked and it's starting to get annoying. I think it must be to do with the version that was on the machine when i got it but using appzapper i have no idea how to get rid of it.
Any help on this would be hugely appreciated.
thanks in advance.It just came up asking for the serial no as before which the upgrade version doesn't have on the packaging.
You've confused me with this. Are you saying that your Logic Studio Upgrade package doesn't have a serial number? Because it should. Inside the box are several thin documents, one of which is called 'Installing Your Software.' You'll find your serial number on that.
It's very possible that if you used App Zapper to uninstall the previous LP8 it didn't find the folder that contains the Serial #, and therefore Logic is still running on your friends number. (I just opened LP8 in App Zapper and it didn't find that folder). Go to Your User/Library/Preferences/Logic, and dump the files within that folder. There are Logic preference files in the Preferences folder, but you want to dump the ones *inside the Logic folder within the Preferences folder*.
You shouldn't have to reinstall Logic to get it to be under your license. Just dump the files mentioned above, start Logic, put in the Serial Number in your package, and then it will be running on yours. You might need the XS key in for that.
Once it's all squared away, and it's running from your serial number, you should be able to update Logic without the XS Key and without having to put in your Serial Number each time.
Good Luck! -
REALLY STRESSED BECAUSE MY IPOD ISN'T SENDING MY IMESSAGES ! It sends them one day and doesn't the next!!!!!!!!!!! PLZ HELP!
Try looking at the previous discussions on the right side of this page under the heading "More Like This" with your same problem.
-
Plz help me
If you're attempting the purchase with only iTunes Store credit, supply a credit card number; it'll be used instead. Otherwise, contact Apple Support as instructed and wait for them to either resolve it themselves or say what needs to be done to solve it; being told to contact the iTunes Store staff means to do that and not to post about it here.
(87295) -
Help please. I cannt get itunes match to work. It just stops on the first step and the status bar continues to say "sending information to apple" for hours. Any ideas?
I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.
-
Plz help in liking my account with the apple store Because I am not able to download anything from apple store
Have you called your credit card issuer? They may be able to provide a reason for the declined purchased.
Also, you can only register for and use the App Store in the country your credit card is issued. Be sure you are buying apps from the correct App Store. -
I can't seem to get the shuffle to work on Itunes? I have it on and albums and it plays thre album in order?
Hello cammie20008,
Hate to hear you are having problems, I will need a little more info to help.
When does the error comes up,is it when you connect the zeen to the internet?
If it shows to be connected i will first suggest running the updates. To run the updates go to "settings" then to "Tools" and under the tools menu you will see "product updates". Run this update and this may help with your issue.
Also, the market for the zeen is called "Slide Sam" you can add other apps and games here. This may not show up until you run the updates.
For the weather app try typing the city and state in rather than the zip code.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
Hello,i just bought iPhone5,i restored from back up..everything is fine BUT my 92 songs does not appear on my ip5.. i saw a couple tatourlis that didnt help.. Wanted to get some answers if anybody would be so kind!!!
You need to return it to the seller and get your money back. You cannot reset or use the device with another AppleID installed unless you know the password for that ID.
If the device has been jailbroken, no one on here can give you any further help...the Terms of Use prohibit us from doing so. -
Regarding logical problem plz help me
hi all
i have a table like this
EMPNO NOT NULL NUMBER(4)
HIREDATE DATE
OFF_DAY NUMBER(3)
now what i want is i want to restrict the user with out entering the data in off_day column continuesly for three days
ex
10 22-09-2004 8
10 23-09-2004 8
10 24-09-2004 8
so in this case i don't want to enter in 3rd row of 24th day for inserting or updating the data.
i am trying it using triggers but i am fail please tell me how to solve this problem
Thanks & Regards
-Chandu
[email protected]You could use:
WHEN-VALIDATE-ITEM trigger to reject changes made
PRE-TEXT-ITEM trigger to hinder the user to enter the field if date isn't in range
Regards,
Martin Malmström
Maybe you are looking for
-
How do i save a dvd to my computer to post it later or send in email, home vido dvd
i have some of my kids wrestling matches but cant post them to face book or send them email because i cant like save them to my laptop i have a single dvd burner and it is a toshiba with windows 7 ... thank you for any imput you can give me.
-
Set parameter as empty date in OIM
Hello I have an adapter that calls a stored procedure and need to pass null as one of the date parameters. I tried not to input anything but OIM sets the parameter value as 01/01/1970. I tried "set variable" task to set the variable as "Empty date" b
-
How to run depreciation business area wise
Hi, pls tel me how to run depreciation business area wise . Regards Girish
-
I have numerous CFMAIL tags on the website. Generally, about 100 messages are sent per day. Approximately five days ago, mail stopped being sent. When you send mail, no CF errors occur. I've checked the "Verify mail server connection box" in the CFAd
-
Dear All, I would like to see the changes in the shipment cost document (VI02--Changes),There is no option in environment,Please tell me how to see the complete changes from shipment cost creation.