Hi.Since I upgraded to Maverick my scanner which is Fuji Xerox Docuprint CM205 fw could not be used for scanning as mac wouldn't find the scanner.Can anyone help please?
Hi.Since I upgraded to Maverick my scanner which is Fuji Xerox Docuprint CM205 fw could not be used for scanning as mac wouldn't find the scanner.Can anyone help please?
There's an alternative ...
Using Image Capture as a scanner:
Connect the scanner to your Mac whether Wi-Fi or USB.
Launch Image Capture.
Click the very small black box bottom right side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Imort To pop up menu on the right to save scanned files to.
Similar Messages
-
Hi All, I have the latest version of iTunes, however since upgrading I can no longer get iTunes to recognise that any devices (iPhone / iPad) are connected? Can anyone help please. Paul
Try holding down CTRL as you launch iTunes to see if it will repair the drivers.
Or try Cerbu's post here.
Or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
Please let us know which approach works for you...
tt2 -
Will I lose my photos in iPhoto if upgrade to a latest version? I have upgraded my system to Mavericks and now my iPhoto doesn't work. Can anyone help, please?
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store -
Since upgrading to Yosemite three days ago I cannot send/receive emails. Can anyone help please?
Since upgrading to Yosemite three days ago I cannot send/receive emails. Can anyone help please?
I would try to reset all the settings in Mail, Preferences, Accounts (outgoing and incoming servers) according to your mail providers specs.
-
Btinternet has changed since 21st Nov and it no longer works on the ipad. Can anyone help please?
Can anyone help please, btinternet have changed their servers on e mail since 21st Nov and I can no longer send or receive e mails. BT say set to the following but I cannot get it to work, any suggestions please.
Go to your iPhone/iPad home screen and tap Settings.
Scroll down to Mail, Contacts, Calendars.
Tap Add Account.
Scroll down and tap Other.
Tap Add Mail Account.
Put the name you want people to see when they get mail from you in the Name field.
Enter your BT Business username in the Address field. For example, [email protected] or, where you have registered a custom domain, [email protected]
Enter your BT Business password in the Password field.
In the Description field enter the name you want to use to identify the account.
Tap Next. If you get an error message at this point, tap OK.
Make sure that POP is selected at the top of the screen.
In the Incoming Mail Server section, change the Host Name to pop.outlook.com.
Scroll down to the Outgoing Mail Server section and change the Host Name to smtp.outlook.com.
Tap Save.Hello Kitty Galore,
It sounds like your your photos that you take on your phone are not showing in your iPad Photo Stream.
I would check both devices to make sure that they both have Photo Stream turned on in the iCloud settings.
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/HT4486
How do I turn on My Photo Stream?
After your devices are up-to-date and you have set up your iCloud account, it’s easy to turn on My Photo Stream on any of your devices:
iOS devices: Go to Settings > iCloud > Photos (Photo Stream in iOS 6), then turn on My Photo Stream.
Mac: Go to System Preferences > iCloud, then select the checkbox for Photo Stream. Click the Options button and verify that the My Photo Stream checkbox is selected. Open the application you want to use with Photo Stream (iPhoto or Aperture) and confirm that My Photo Stream is turned on in that application. You can also adjust your my Photo Stream settings in iPhoto or Aperture Preferences.
If it is enabled, then I would check to make sure Automatic Upload is enabled with this article:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
I imported photos to iPhoto or Aperture from my camera, but I do not see them uploaded to the My Photo Stream album, though the service is enabled.
In iPhoto or Aperture, navigate to Preferences > Photo Stream. Ensure that Automatic Upload is enabled under My Photo Stream and that you have an active Wi-Fi or Ethernet connection.
If Automatic Upload is not enabled, you can either enable it and import again, or manually add the newly imported photos to My Photo Stream in iPhoto or Aperture by dragging them into the My Photo Stream album in your Library.
Cheers,
Sterling -
can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected. what do I do
I have been looking for over a week now and even chatted with the USA but cannot get it to work.
I am really strugglingThanks
someone named Eloisa she gave me a phone no. or visit hp.com/uk
cannot make head nor tale of it all. I am old. and find everything hard to undertstand -
Not sure if I'm repeating myself here, but here is a repeat:
HI, my friend has updated her iPad to iOS8 and has since lost sight of anything she types, ie, email, chat in games, etc. can anyone help, please?If the keyboard is in the middle of the screen tap the tiny keyboard in the lower right corner of the keyboard then slide your finger up to dock then release finger.
-
Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.
Hey Ian
That would be correct. because of the nature of your issue, you may find more information by using another one of Apple's support resources.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Thank you for using the Apple Support Community.
-Norm G. -
I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.
There's a new driver bundle for OSX 10.6 that you might need to install, the HP link seems to be failing at the moment but there's a version of it here: HP_Installer_Scanjet_v2.4.3_Ph4.dmg
There's a piece on the HP Forum about it here (some folks have problems installing ...)
http://h30499.www3.hp.com/t5/Macintosh-Compatible-Products/Scanner-Drivers-softw are-for-Snow-Leopard-Mac-OSX-10-6-will-not/td-p/2301674 -
Just upgraded to the latest iTunes and iPhoto and now cannot change photos on my iPad, can anyone help please?
Try one or more of the following:
> Restart Your Computer
> Uninstall and Reinstall iTunes
> Reset iPod (nothing will get deleted)
> Look in My Computer (Windows 98, XP) OR Computer (Windows Vista or 7) and see if your iPod is in there.
In some cases (and this happened to me before) plug your iPod in and out your computer a few times. It should get it going. If not, then I strongly recommend starting your computer. -
I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???
You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
iPad: Unable to update or restore -
my iPhoto will not open since I installed Mavericks. Can anyone help with this please?
Do you have one of the versions that are shown here with the forbidden symbol over them:
If so you'll need to upgrade iPhoto to 9.5.1 from the App Store. It'll be a free upgrade.
OT -
Since the last iOS 6.1.3 update, my phone is constantly crashing!! can anyone help please
this is driving me insane!! since the last iOS 6.1.3 update my phone is crashing all of the time!! can anyone help please
Hi Samantha,
Are you aware that if you restore your ipad that you will lose all data from your ipad and very difficult to get it back unless you had previously made a back-up of your data on itunes or in the cloud. and that would be on the computer you set those up on. (There are some independent apps out there that might help restore data but I don't have any experience with them...)
Also, I think if you restore on another computer you're supposed to have administrator rights and have the latest itunes update. And I think if you sync (if restoring is considered syncing with another computer, you'll be locked out of your computer or a new one.)
I don't know if there is a way for you to safely eject your ipad from your mom's laptop and find another way, but please read this
http://support.apple.com/kb/ts1275
Also, I suggest you start a new post and title it something like First, stuck on update and now on Restore on another computer. Please HELP! And then tell the story of your problem that you originally included and your follow-up efforts to restore given a suggestion on previous post (though I think you SHOULD AVOID RSTORE if you can.) And refer them to your original post
https://discussions.apple.com/message/22050045?ac_cid=tw123456#22050045
Hope this helps and if you can get back to your ios before the upgrade, stay with it. I hope it all works out for you.
FYI - If it's a new or refurb bought within the past year you might be able to have it replaced by Apple. -
Upgraded to 8.02, many songs in library won't play: "Song could not be used
A few days ago, I took the 8.02.20 update to iTUNES on my PC with Windows XP, I have latest service pack, yada yada.
After the iTunes upgrade, I noticed that many of my songs in my itunes library won't play when I click on them.
I get the icon of the exclamation point in a circle to the left of the song name, and the message says:
"song XXX could not be used because the original file could not be found." Would you like to locate it?"
I never moved any of my songs, and the songs that it says could not be found ARE indeed on my computer, and I can use the Windows file explorer to find the song and play it.
Back to iTunes, I decide to answer yes to the error, and "find the song" by manually meandering over to the song through the file browser window which iTunes pops up, I get to the file, and it then plays in iTunes.
My question is, how did iTunes "forget" where the songs are, and why did it forget most of them, but yet leave many others ok. I never moved nay files or anything.
Is there a way to make it recompile the library?Probably not every one, but you will have to do it several times. Right click on the name of the song, show in window's explorer and when it can't it should give you a dialogue to find the song.
Once it finds one it'll offer to find more and you can locate stuff that way. -
Hi, I had to renew my iPhone 4s and backed up all my data to iCloud and since starting it up and transferring my information over I cant send or receive messages, can anyone help please
Hi there,
Do you have icloud account? You need firstly turn off find my iphone (by go to icloud.com -->sign in --> go to "Find my iphone" and erase your iphone in it). And then you restore your iphone with DFU mode.
When you erase your Find my iphone and if you can not restore, your iphone has a problem with hardware.
Some infos can help you.
Kind regards,
Maybe you are looking for
-
Why doesn't itunes have an simple upload option for putting CDs and DVDs into my ipod touch library?
I have movies and CDs I don't want to have to purchase again through itunes that I would like to put on my ipod touch without a lot of complicated hassles. I don't understand why it isn't a simple point and click and it happens option on my itunes li
-
Using struts witn ValueListHandler
Hi, I am trying to use ValueListHandler for generating a report in my project. I am using DAO and DAOImplementor, which will be called by my EJB method. I get the result in my Helper class, which is actually set in session, if i intend to directly us
-
Adobe 11 Add-in and Excel 2013
I can't get the Adobe 11 Add-in to show up in the Excel 2013 tool bar.
-
Triggering input into a MIO-16XE-50 using a DIO-96
Hi there, I was wondering if anyone knows how to trigger input into an MIO16XE50 using a DIO-96 card. I want to send out a digital pulse to a BNC-2090 that is connected to both the MIO16XE50 and the DIO96 using the DIO96 card. After this digital puls
-
Dear All, I want to put approval steps on goods receipt. Scenario is that while doing GR as soon as the store person press the POST button the GR should not be posted instead it should go to Stores Manager for approval , once approved by store manage