Hidden comments for users of Word 2013, but not earlier versions

I have a Word document that was probably originally created with Word 2000. We continuously work with this document and have made many changes over the last 15 years. We've made changes to the document using Word 2003, 2007, 2010 and 2013.
Now, when users of Word 2013 use the document, most of the comments do not appear in balloons. A few of the comments do appear in balloons. Users of earlier versions of Word see all of the comments in balloons. All users can see all comments in the
reviewing pane.
Show Markup is set for display of all information. I.e., there are checkmarks by "Comments", "Ink", "Insertions and Deletions", "Formatting", "Balloons/Show Revisions in Balloons", and "Specific People/All
Reviewers".
We had been saving the document as a Word 97-2003 Document. I converted it to a "Word Document" and the behavior is the same.
Thanks.

Try this in Word 2013: Copy the document content, minus the final paragraph mark, into a new file. Does that make a difference?
Stefan Blom, Microsoft Word MVP

Similar Messages

  • Bought updating the fireworks CS6 but not earlier versions what to do?

    bought updating the fireworks CS6 but not earlier versions what to do?

    Not a lot that you can do about it - except returning the CS6 update, and getting the full version. Do remember that Fireworks is no longer developed by Adobe, and is effectively a "dead" application. You may want to invest your money in alternative software.
    Alternatively, try to seek out a legit copy of CS5, and update that one. You might be successful on ebay - but there are a lot of illegal versions on sale on ebay, unfortunately.

  • PDFmaker add-in works in Word 2013, but not in PowerPoint 2013

    Windows 7 64-bit
    Office H&B 2013 fully updated
    Acrobat XI 11.0.07
    PDFmaker add-in used work perfectly in Word and PowerPoint, but lately it hangs on the "Publishing" step when used in PowerPoint.  I cannot pinpoint when the error started, but it's very annoying!
    Any troubleshooting suggestions would be appreciated.
    Sincerely,
    PDF Dude

    I am currently having the same issue - when I restart PowerPoint, I am informed that the add-in pdfmofficeaddin.dll has caused PowerPoint to crash and I should disable the add-in. I have tried removing that .dll file and reinstalling Acrobat, but that does not work.
    If you disable the add-in you can still save as a PDF via PowerPoint with the standard Save As route... but my issue is that I am trying to combine a Word and PowerPoint file into one PDF, and evidently I cannot do that without pdfmofficeaddin.dll enabled, and every time it is enabled, it crashes PowerPoint.
    Agreed - please help!

  • Can't leave voicemail for users on some servers but not others

    We have 3 Exchange 2010 servers and 3 Exchange 2013 servers (we are in the process of moving everyone over to Exchange 2013.)  
    When we enable UM on a mailbox that is on one of the Exchange 2013 servers, everything works.  However when we enable UM on a mailbox on the other 2 servers, we receive the message "sorry, you have
    a mailbox that is not supported by this unified messaging server."
    We've re-checked the dial plans, gateways, etc. and are completely stumped.  Any assistance or pointers would be greatly appreciated.
    Thanks,
    Robert

    Can you describe your architecture in detail?
    Are the 2010 Mailboxes UM enabled?  What are you using for the "phone system"? Lync? Something else?
    Are you moving over Um enabled mailboxes or only UM enabling once move to 2013?
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Why does Proxy Authentication prompt for user/pass on Win7 but not XP?

    Trying to use NTLM authentication for our proxy through Firefox 7.0.1. It works great in Windows XP - the user doesn't ever get prompted for his username or password when going to the internet. However, when using the same settings with Windows 7 machines going to the same internet sites, they always get prompted for username and password. Is there a workaround for this? Is this a bug?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • HT4009 Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

    Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

    You can try contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Right click with mouse in Word 2013 does not give the list with translate and synonyms etc

    since i upgraded to windows 8.1 right click on words in word 2013 does not open the regular list where you can tap on synonyms and translate. 
    it does work if i touch the screen.
    i moved to mouse mode but it does not help 
    can anyone help...
    i am starting to hate windows 8.1 and word 2013 because of this feature not working

    Hi
    I have tested in my computer and it worked well.
    Normally when we type a wrong spelling, right clicking the word does not give a list with translate and synonyms.
    Check to make sure your spelling is right.
    if the issue persists, Start Word in safe mode to check the issue:Hold "Ctrl" key and click into the program.
    It is also recommended that you do a repair for your Office suites in
    Control panel>Program and features>Office>Change>Repair
    Thanks
    Tylor Wang
    TechNet Community Support

  • Inbox emails downloaded in Outlook 2013 but not my others folders emails they r showing empty in outlook

    Inbox emails downloaded in Outlook 2013 but not my others folders emails they r showing empty in outlook

    Hi,
    What’s your account type using in Outlook? IMAP account or Exchange account?
    Please make sure your Outlook 2013 is updated to the latest version. Then click Send/Receive > Send/Receive All Folders to manually download mailbox data files from mail server to Outlook data file. If it fails, please recreate the IMAP account in Outlook
    to have a try:
    http://support.microsoft.com/kb/829918
    Additionally, if you are using IMAP account, we can also refer to the following article for more IMAP Syncing issue troubleshooting:
    http://www.msoutlook.info/question/840
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
    make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Connecting computer to tv for viewing EPIX,ETC.. but not through router?????

    I need to start connecting computer to tv for viewing EPIX,ETC.. but not through router?????  I have a workroom with a TV but without cable connection, so I thought I would connect my computer to my TV.  I have an Acer Aspire laptop. and a 27" tv.  Please can anyone tell me how to get this to work.  I need something to watch while I am working.

    I'm a little confused here as to what you're looking for. Are you simply trying to get Internet Connectivity to the computer using the best method possible or are you looking to try and send a signal to the TV without a cable connection going to it? The computer's Internet portion is easy if that is the case. If we can just get some additional information on that, we'll figure out how to approach it.
    1: Does this Workroom have any Coaxial cabling going to it that can be connected back to the cabling the FiOS equipment is using?
    2: Is Ethernet cabling available and running to the location of the router, or nearby?
    3: Would Wireless work for you (as much as it is not ideal)?
    4: Are you looking for a Physical connection to the network?
    Now if what you're trying to accomplish is the actual connection between the Computer and the TV, check to see what inputs the TV supports (HDMI, VGA, DVI, Component, Composite) and see what the laptop supports (DisplayPort, VGA, HDMI, DVI). More than likely the Laptop would have a VGA connection along with the TV. Your best bet would be to honestly just connect a VGA Cable between the two machines, and then for audio, just use a 3.5" to Composite connection for the TV (Unless the TV has a 3.5" Input jack for the PC Input). If HDMI is available on both devices, by all means use that. Same with DVI as both give better picture quality over a VGA Cable.
    If you can give us exact model numbers, that would help.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • After update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games

    after update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games

    Maybe I understood your problem. Get to Settings > Sounds > Ringers and Alerts >Turn Change With Buttons to Off. And if your Side Switch is assigned to 'Mute', turn it back on, else, use the control center to turn off mute.
        P/s: And your name is...

  • Chararacteristic 0CALQUARTER is available in version M but not in version D

    Dear Sirs
    I hope you're doing fine. While activating InfoCube 0PUR_C01 I get the following error:
    <i><b>RSAU709 : Chararacteristic 0CALQUARTER is available in version M but not in version D.</b></i>
    (Yes, the word <i>characteristic</i> is misspelled in the message text)
    There is no more detailed information so I'm stuck..Please help.
    With best regards
    Manuel<i></i><i></i>

    Try executing the function module RSDG_IOBC_REORG function module in transaction SE37 (F8 -> single test) with the following parameters:
    Function module              RSDG_IOBC_REORG
    Import parameter             Value
    I_OBJVERS                    A
    I_PROGRESS
    I_IOBJTP                    *
    I_ALL_IOBJ                   X
    I_T_IOBJNM                  0 entries
    I_BYPASS_BUFFER
    F8 -> Execute

  • JD3.* could connecting Oracle database 5.05 but not new version

    Dear Sir,
    JD3.* could connecting Oracle database 8.05 but not new version of Oracle_Database at all(8I and 9I in OTN version), but could run on Borland JBuilder.
    Error message : IOException
    Could you tell me, help me too.
    steve chu
    (This week in Openworld and and email: [email protected])

    Steve -- My guess would be that you need to upgrade your JDBC drivers for your client program. They are downloadable from OTN. I expect that JBuilder has its own JDBC drivers which are newer than what you have and that is why it does not have a problem.
    Thanks -- Jeff

  • Skype for Business - Manage the .msi but not Users...

    We are considering deploying Skype for Business across our large, international organization.  Two questions:
    Can we disable the File Transfer function in the .msi we push out to everyone?  Our concern is data leakage of confidential information.
    Our central IT shared services group wants to manage the configuration and deployment of the .msi but not be tasked with managing everyone's Skype accounts and billing/funding issues.  Does Skype account creation and funding of those accounts remain with the individual Skype user when Skype for Business is used?  
    Thanks for your help.

    Hi,
    From your description above, did you use Lync 2013 basic version?
    Please check if Windows 7 update to the latest version firstly.
    As Holger Bunkradt said above, please try to install the update manually.
    Best Regards,
    Eason Huang
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Eason Huang
    TechNet Community Support

  • Mail server automatically cc all email for user to other acct but group...

    Back on April 2007, David_X answered this question:
    How to have the mail server automatically cc all e-mail for user to other accounts, (gmail, hotmail, etc). Here is the old post that explains that:
    http://discussions.apple.com/thread.jspa?messageID=4357149&#4357149
    What I did not catch at the time was if you setup a Group, one of three ways, the cc step no longer works. There is a fourth way but it is not practical. Creating local groups on individual Macs.
    *Group method 1 per David_X:*
    Use edited group files on the server.
    The following sends to members of groups but does not show all recipients in the received message...
    In /etc/postfix/aliases, add...
    groupname: :include:/path/to/groupname.txt
    In a file called groupname.txt (using plaintext editor)...
    [email protected]
    [email protected]
    Reload aliases...
    sudo newaliases
    sudo postalias aliases
    sudo postfix reload
    Mail sent to [email protected] gets passed to amavisd once, before then being relayed out for each individual recipient.
    *Group method 2 per David_X:*
    Make a user, e.g., "accounts"
    In mail settings, select 'Forward' option and enter the group members' email addresses, comma separated e.g.,
    [email protected],[email protected]
    This gets a bit 'long' for lots of members.
    The email then gets sent to each of the people in this list.
    *Group method 3 that I just discovered:*
    Create a group in Workgroup Manager.
    Drag the users you want in it.
    Save.
    Test sending to that group.
    Best part, the group name shows up in Address Book if you have LDAP setup.
    So I have setup all three. If I send an email to any type of group, they work.
    The problem:
    If one of those members in the group also has a BCC setup to Gmail or any other outside email, they never get the e-mail copied out to the external account.
    Example:
    I send an email to [email protected]. He gets the email there and also a copy at his Gmail account.
    If I send an email to the Sales group that jsmith belongs to, he gets the email there but nothing at the Gmail account.
    It looks like the mail server processes the "aliases" file and skips the "Recipient_bcc" file that handles the forwards.
    Is there a way to have my cake and eat it too? David_X your thoughts also?
    Thanks everyone!

    Bump.
    Short version. Sales guy has a Gmail account he wants his e-mail copied to also.
    Send e-mail directly to his Xserve account, he gets it there and it gets sent on to his Gmail account.
    Send an e-mail to the sales Group that he is a member of, he gets it there but it never gets sent out to the Gmail account.
    Ideas?

  • Search for coding possible thru Toad, but not thru Forms Builder

    Hi all,
    I am searching for a particular word 'instalment' which is used in forms. when I search using 'Find and Replace PL/SQL' there are no matches. But in Toad, when i search in 'Find in Files', its displaying the code containing the above word in a particular .fmb file. why this is happening?? I am in urgent need of that code.
    Pls help me.. its urgent!!
    Edited by: user13106173 on Dec 6, 2010 3:05 AM

    When I open that file in Quick view from ToadWhich file are you referring too when you say "that file"? I assume you mean the Forms Module (.fmb), but I hate to assume things so could you please confirm this for me? ;-)
    How can we see attached library details?There is no way to view the PL/SQL code of an attached library except by opening the library in the Forms Builder. If your form has an attached library, the Object List Report will indicate there are attached libraries in the "Attached PL/SQL Libraries" section of the report.
    * Attached PL/SQL Libraries                        
       * Name                                            MY_LIB_NAME
       - Comments                                       
       * PL/SQL Library Location                         MY_LIB_NAME
       * Name                                            RP2RRO
       - Comments                                       
       * PL/SQL Library Location                         rp2rro
    But through forms builder, I cant see the below details. Don't quote me on this, but believe TOAD's quick view displays all of the code in the .fmb, even the code of an attached library, whereas Forms Builder will allow you to see the signature of the program units in the attached library, but not the code.
    Also the ct_message display item used here is not created in this particular form. It is in some other form. How this happens?Is the CT_MESSAGE display item a Subclassed item? Meaning, it was included in your form file through an Object Library or by copying the item to the form and choosing to subclass (create a reference to) the item rather than copy of the item in your form. Oracle Forms implements inheritence through the use of subclasses. By subclassing an item (be it a Visual widget [like a button] or a Program Unit) Forms stores a refernce to the object rather than the actual object. This allows you to share and reuse code and objects.
    Check the Object List Report of your form and see if there are any attached libraries. If there are attached libraries, open these libraries in Forms Builder to find your code. It is also also possible to subclass objects in your form file through the use of Object Libraries. Check your Object List Report to see if there is an Object Groups sections:
    * Object Groups                                    
       * Name                                            CALENDAR
       - Subclass Information                           
       - Comments                                       
       * Object Group Children                          
         * Name                                          WHEN-NEW-FORM-INSTANCE
         - Subclass Information                         
         * Real Object Pointed to by the Object Group Child
         * Name                                          WHEN-WINDOW-ACTIVATED
         - Subclass Information                         
         * Real Object Pointed to by the Object Group Child
    .....If the CT_MESSAGE item was added to your form thorugh an object library, it will be listed in this section of the object list report.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

Maybe you are looking for